Endogenous mutagenesis by an insertion sequence element identifies Aeromonas salmonicida AbcA as an ATP-binding cassette transport protein required for biogenesis of smooth lipopolysaccharide.

Analysis of an Aeromonas salmonicida A layer-deficient/O polysaccharide-deficient mutant carrying a Tn5 insertion in the structural gene for A protein (vapA) showed that the abcA gene immediately downstream of vapA had been interrupted by the endogenous insertion sequence element ISAS1. Immunoelectron microscopy showed that O polysaccharides did not accumulate at the inner membrane-cytoplasm interface of this mutant. abcA encodes an unusual protein; it carries both an amino-terminal ATP-binding cassette (ABC) domain showing high sequence similarity to ABC proteins implicated in the transport of certain capsular and O polysaccharides and a carboxyl-terminal potential DNA-binding domain, which distinguishes AbcA from other polysaccharide transport proteins in structural and evolutionary terms. The smooth lipopolysaccharide phenotype was restored by complementation with abcA but not by abcA carrying site-directed mutations in the sequence encoding the ATP-binding site of the protein. The genetic organization of the A. salmonicida ABC polysaccharide system differs from other bacteria. abcA also differs in apparently being required for both O-polysaccharide synthesis and in energizing the transport of O polysaccharides to the cell surface.

Arthroscopic stabilisation of an acute acromioclavicular dislocation grade III in a patient with ectopic insertion of the pectoralis minor: technical considerations

The different approaches used in arthroscopic stabilisation of the acromioclavicular joint are well known. However, and despite a great incidence of ectopic pectoralis minor insertion, an alternative choice for the use of arthroscopic portal has not being sufficiently described. Here, we describe a case of acute acromioclavicular dislocation grade III. The arthroscopic stabilisation was achieved using the TightRope (Arthrex, Naples, USA) implant. Through this technique, the approach to the articular portion of the coracoid process can be made intra-articularly or from the subacromial space. We accessed intra-articularly, by opening the rotator interval to reach the coracoid process from the joint cavity. After opening the rotator interval, an ectopic insertion of the pectoralis minor was observed. The choice of approach of the coracoid process from the subacromial space would have complicated the intervention, making it necessary to sever the ectopic tendon to complete the technique, lengthening the surgical time and increasing the chance of complications. For this reason, the use of a standard posterior portal providing intra-articular arthroscopic access through the rotator interval is recommended since the aforementioned anatomical variation is not infrequent. Level of evidence Therapeutic studies—investigating the results of treatment, Level V.

Growing Neural Gas approach for obtaining homogeneous maps by restricting the insertion of new nodes

The Growing Neural Gas model is used widely in artificial neural networks. However, its application is limited in some contexts by the proliferation of nodes in dense areas of the input space. In this study, we introduce some modifications to address this problem by imposing three restrictions on the insertion of new nodes. Each restriction aims to maintain the homogeneous values of selected criteria. One criterion is related to the square error of classification and an alternative approach is proposed for avoiding additional computational costs. Three parameters are added that allow the regulation of the restriction criteria. The resulting algorithm allows models to be obtained that suit specific needs by specifying meaningful parameters.

Enhancement of the Electrochemical Performance of SWCNT dispersed in a Silica Sol-gel Matrix by Reactive Insertion of a Conducting Polymer

The electroassisted encapsulation of Single-Walled Carbon Nanotubes was performed into silica matrices (SWCNT@SiO2). This material was used as the host for the potentiostatic growth of polyaniline (PANI) to yield a hybrid nanocomposite electrode, which was then characterized by both electrochemical and imaging techniques. The electrochemical properties of the SWCNT@SiO2-PANI composite material were tested against inorganic (Fe3+/Fe2+) and organic (dopamine) redox probes. It was observed that the electron transfer constants for the electrochemical reactions increased significantly when a dispersion of either SWCNT or PANI was carried out inside of the SiO2 matrix. However, the best results were obtained when polyaniline was grown through the pores of the SWCNT@SiO2 material. The enhanced reversibility of the redox reactions was ascribed to the synergy between the two electrocatalytic components (SWCNTs and PANI) of the composite material.

Une meilleure insertion professionelle des personnes issues de l’immigration: allons au mainstreaming Issue 2015/2 mars 2015 = Immigrant labour market participation in Belgium - high time to mainstream. IES Policy Brief Issue 2015/2 March 2015

No Abstract.

A low insertion loss, capacitively scanned goniometer for Faraday rotation measurements in the V.H. F. range

Mode of access: Internet.

Enhanced optical properties of the GaAsN/GaAs quantum-well structure by the insertion of InAs monolayers

Microstructural and optical properties of InAs-inserted and reference single GaAsN/GaAs quantum-well (QW) structures grown by metalorganic chemical vapor deposition were investigated using cross-sectional transmission electron microscopy and photoluminescence (PL). Significant enhancement of PL intensity and a blueshift of PL emission were observed from the InAs-inserted GaAsN/GaAs QW structure, compared with the single GaAsN/GaAs QW structure. Strain compensation and In-induced reduction of N incorporation are suggested to be two major factors affecting the optical properties. (C) 2004 American Institute of Physics.

Membrane insertion of anthrax protective antigen and cytoplasmic delivery of lethal factor occur at different stages of the endocytic pathway

The protective antigen (PA) of anthrax toxin binds to a cell surface receptor, undergoes heptamerization, and binds the enzymatic subunits, the lethal factor (LF) and the edema factor (EF). The resulting complex is then endocytosed. Via mechanisms that depend on the vacuolar ATPase and require membrane insertion of PA, LF and EF are ultimately delivered to the cytoplasm where their targets reside. Here, we show that membrane insertion of PA already occurs in early endosomes, possibly only in the multivesicular regions, but that subsequent delivery of LF to the cytoplasm occurs preferentially later in the endocytic pathway and relies on the dynamics of internal vesicles of multivesicular late endosomes.

Insertion of an E-coli lacZ gene in Acetobacter xylinus for the production of cellulose in whey

A mini-Tn10:lacZ: kan was inserted into a wild-type strain of Acetobacter xylinus by random transposon mutagenesis, generating a lactose-utilising and cellulose-producing mutant strain designated ITz3. Antibiotic selection plate assays and Southern hybridisation revealed that the lacZ gene was inserted once into the chromosome of strain ITz3 and was stably maintained in non-selective medium after more than 60 generations. The modified strain had, on the average, a 28-fold increase in cellulose production and a 160-fold increase in beta-galactosidase activity when grown in lactose medium. beta-Galactosidase activity is present in either lactose or sucrose medium indicating that the gene is constitutively expressed. Cellulose and beta-galactosidase production by the modified strain was also evaluated in pure and enriched whey substrates. Utilisation of lactose in whey substrate by ITz3 reached 17 g l(-1) after 4 days incubation. (C) 2004 Federation of European Microbiological Societies. Published by Elsevier B.V. All rights reserved.

Non-curliation of Escherichia coli O78:K80 isolates associated with IS1 insertion in csgB and reduced persistence in poultry infection

The elaboration of curli fimbriae by Escherichia coli is associated with the development of a lacy colony morphology when grown on colonisation factor antigen agar at 25 degrees C. Avian colisepticaemia E. coli isolates screened for curliation by this culture technique showed lacy and smooth colonial morphologies and the genetic basis of the non-curliated smooth colonial phenotype was analysed. Two smooth E. coli O78:K80 isolates possessed about 40 copies of the IS1 element within their respective genomes of which one copy insertionally inactivated the csgB gene, the nucleator gene for curli fibril formation. One of these two isolates also possessed a defective rpoS gene which is a known regulator of curli expression. In the day-old chick model, both smooth isolates were as invasive as a known virulent O78:K80 isolate as determined by extent of liver and spleen colonisation post oral inoculation but were less persistent in terms of caecal colonisation.

Sequence analysis and distribution of an IS3-like insertion element isolated from Salmonella enteritidis

The nucleotide sequence of a 3 kb region immediately upstream of the sef operon of Salmonella enteritidis was determined. A 1230 base pair insertion sequence which shared sequence identity (> 75%) with members of the IS3 family was revealed. This element, designated IS1230, had almost identical (90% identity) terminal inverted repeats to Escherichia coli IS3 but unlike other IS3-like sequences lacked the two characteristic open reading frames which encode the putative transposase. S. enteritidis possessed only one copy of this insertion sequence although Southern hybridisation analysis of restriction digests of genomic DNA revealed another fragment located in a region different from the sef operon which hybridised weakly which suggested the presence of an IS1230 homologue. The distribution of IS1230 and IS1230-like elements was shown to be widespread amongst salmonellas and the patterns of restriction fragments which hybridised differed significantly between Salmonella serotypes and it is suggested that IS1230 has potential for development as a differential diagnostic tool.

A new role for Low German? Language insertion as bilingual practice in the process of language shift

This article analyses language insertion as a bilingual communicative practice, applying a functional, speaker-focused approach to the study of sociolinguistics and language contact. The article is based on a study of contact phenomena in a formerly diglossic region in Northern Germany, where the previously spoken language – Low German – is in the process of being replaced by the dominant standard variety, German. It examines regional publications in order to establish the linguistic techniques by which Low German elements are incorporated into the Standard German texts and the communicative purposes that they serve. The paper concludes that in the process of language shift an emblematic repertoire from Low German is created which can be applied into the dominant contact language, German, for specific communicative purposes.