983 resultados para Level Set Approximation
Resumo:
The abundance of atmospheric oxygen and its evolution through Earth's history is a highly debated topic. The earliest change of the Mo concentration and isotope composition of marine sediments are interpreted to be linked to the onset of the accumulation of free O2 in Earth's atmosphere. The O2 concentration needed to dissolve significant amounts of Mo in water is not yet quantified, however. We present laboratory experiments on pulverized and surface-cleaned molybdenite (MoS2) and a hydrothermal breccia enriched in Mo-bearing sulphides using a glove box setup. Duration of an experiment was 14 days, and first signs of oxidation and subsequent dissolution of Mo compounds start to occur above an atmospheric oxygen concentration of 72 ± 20 ppmv (i.e., 2.6 to 4.6 × 10−4 present atmospheric level (PAL)). This experimentally determined value coincides with published model calculations supporting atmospheric O2 concentrations between 1 × 10−5 to 3 × 10−4 PAL prior to the Great Oxidation Event and sets an upper limit to the molecular oxygen needed to trigger Mo accumulation and Mo isotope variations recorded in sediments. In combination with the published Mo isotope composition of the rock record, this result implies an atmospheric oxygen concentration prior to 2.76 Ga of below 72 ± 20 ppmv.
Resumo:
BACKGROUND In an effort to reduce firearm mortality rates in the USA, US states have enacted a range of firearm laws to either strengthen or deregulate the existing main federal gun control law, the Brady Law. We set out to determine the independent association of different firearm laws with overall firearm mortality, homicide firearm mortality, and suicide firearm mortality across all US states. We also projected the potential reduction of firearm mortality if the three most strongly associated firearm laws were enacted at the federal level. METHODS We constructed a cross-sectional, state-level dataset from Nov 1, 2014, to May 15, 2015, using counts of firearm-related deaths in each US state for the years 2008-10 (stratified by intent [homicide and suicide]) from the US Centers for Disease Control and Prevention's Web-based Injury Statistics Query and Reporting System, data about 25 firearm state laws implemented in 2009, and state-specific characteristics such as firearm ownership for 2013, firearm export rates, and non-firearm homicide rates for 2009, and unemployment rates for 2010. Our primary outcome measure was overall firearm-related mortality per 100 000 people in the USA in 2010. We used Poisson regression with robust variances to derive incidence rate ratios (IRRs) and 95% CIs. FINDINGS 31 672 firearm-related deaths occurred in 2010 in the USA (10·1 per 100 000 people; mean state-specific count 631·5 [SD 629·1]). Of 25 firearm laws, nine were associated with reduced firearm mortality, nine were associated with increased firearm mortality, and seven had an inconclusive association. After adjustment for relevant covariates, the three state laws most strongly associated with reduced overall firearm mortality were universal background checks for firearm purchase (multivariable IRR 0·39 [95% CI 0·23-0·67]; p=0·001), ammunition background checks (0·18 [0·09-0·36]; p<0·0001), and identification requirement for firearms (0·16 [0·09-0·29]; p<0·0001). Projected federal-level implementation of universal background checks for firearm purchase could reduce national firearm mortality from 10·35 to 4·46 deaths per 100 000 people, background checks for ammunition purchase could reduce it to 1·99 per 100 000, and firearm identification to 1·81 per 100 000. INTERPRETATION Very few of the existing state-specific firearm laws are associated with reduced firearm mortality, and this evidence underscores the importance of focusing on relevant and effective firearms legislation. Implementation of universal background checks for the purchase of firearms or ammunition, and firearm identification nationally could substantially reduce firearm mortality in the USA. FUNDING None.
Resumo:
Despite the extensive work on currency mismatches, research on the determinants and effects of maturity mismatches is scarce. In this paper I show that emerging market maturity mismatches are negatively affected by capital inflows and price volatilities. Furthermore, I find that banks with low maturity mismatches are more profitable during crisis periods but less profitable otherwise. The later result implies that banks face a tradeoff between higher returns and risk, hence channeling short term capital into long term loans is caused by cronyism and implicit guarantees rather than the depth of the financial market. The positive relationship between maturity mismatches and price volatility, on the other hand, shows that the banks of countries with high exchange rate and interest rate volatilities can not, or choose not to hedge themselves. These results follow from a panel regression on a data set I constructed by merging bank level data with aggregate data. This is advantageous over traditional studies which focus only on aggregate data.
Resumo:
The persistence of low birth weight and intrauterine growth retardation (IUGR) in the United States has puzzled researchers for decades. Much of the work that has been conducted on adverse birth outcomes has focused on low birth weight in general and not on IUGR. Studies that have examined IUGR specifically thus far have focused primarily on individual-level maternal risk factors. These risk factors have only been able to explain a small portion of the variance in IUGR. Therefore, recent work has begun to focus on community-level risk factors in addition to the individual-level maternal characteristics. This study uses Social Ecology to examine the relationship of individual and community-level risk factors and IUGR. Logistic regression was used to establish an individual-level model based on 155, 856 births recorded in Harris County, TX during 1999-2001. IUGR was characterized using a fetal growth ratio method with race/ethnic and sex specific mean birth weights calculated from national vital records. The spatial distributions of 114,460 birth records spatially located within the City of Houston were examined using choropleth, probability and density maps. Census tracts with higher than expected rates of IUGR and high levels of neighborhood disadvantage were highlighted. Neighborhood disadvantage was constructed using socioeconomic variables from the 2000 U.S. Census. Factor analysis was used to create a unified single measure. Lastly, a random coefficients model was used to examine the relationship between varying levels of community disadvantage, given the set of individual-level risk factors for 152,997 birth records spatially located within Harris County, TX. Neighborhood disadvantage was measured using three different indices adapted from previous work. The findings show that pregnancy-induced hypertension, previous preterm infant, tobacco use and insufficient weight gain have the highest association with IUGR. Neighborhood disadvantage only slightly further increases the risk of IUGR (OR 1.12 to 1.23). Although community level disadvantage only helped to explain a small proportion of the variance of IUGR, it did have a significant impact. This finding suggests that community level risk factors should be included in future work with IUGR and that more work needs to be conducted. ^
Resumo:
The objective of this cross-sectional study was to examine the relationship of provincial economic development indices with incidences of child injury mortality in Thailand from 1999 - 2001. All injury deaths among children age 1-14 years were included. The independent variables included gross provincial product per capita (GPP/c), poverty and inequality indices, material and social deprivation indices, population in rural/ urban areas, and migration. Due to multicollinearity of such variables, the 76 provinces were categorized by GPP/c quartile, and means of overall injury, drowning, and transport-related mortality rates were compared among quartile groups. Spearman’s rho correlation between GPP/c and injury mortality rates was also performed. Finally, factor analysis was employed to create a set of factors to be treated as uncorrelated variables and stepwise multiple regression was carried out for the effects of the factors on injury mortality rates. A significant direct relationship was observed between GPP/c and overall injury mortality among children age 1-4 years, and 10-14 year-olds of both genders. Drowning was the main cause of this relationship among children age 1-4 years, and transport-related injury was the principle cause among children age 10-14 years. Conversely, provinces with lower GPP/c experienced higher injury mortality rates among school-age children 5-9 years old for both genders, mostly due to drowning. Factor analysis, and multiple regression results confirmed the relationships between economic development and injury mortality rates. These findings revealed that economic development had an adverse impact on injury-related mortality among children 1 to 4 and 10 to14 in Thailand.
Resumo:
Históricamente la captación estadística del empleo agropecuario (y más específicamente del empleo asalariado agropecuario) ha presentado una serie de problemas y limitaciones para las fuentes de datos tradicionales. Los elevados niveles de transitoriedad, estacionalidad, no registro e informalidad han tenido como consecuencia una serie de dificultades en su cuantificación por medio de las fuentes censales y muestrales tradicionales. Los procesos más recientes que atraviesan a esta fracción social (urbanización, acortamiento de ciclos productivos y ocupacionales, disminución de requerimientos de fuerza de trabajo por la mecanización de ciertas cosechas, etc.) parecen haber incrementado dichas dificultades. Trabajos previos realizados demuestran que los censos de población y agropecuarios arrojan diferentes resultados en la cuantificación de los asalariados del sector. Se presenta en este documento un análisis comparado de los resultados obtenidos en Argentina, por el Censo Nacional de Población y Vivienda de 2001 y el Censo Nacional Agropecuario de 2002. El objetivo buscado es realizar una aproximación a las diferentes cifras de asalariados en el agro que arrojan ambos relevamientos en todos los departamentos del país. A su vez, se intentará vincular dichas diferencias con los distintos territorios y distintas estructuras sociales y agrarias, buscando descubrir si permiten aportar a la explicación de aquellos resultados divergentes. Para ello se confeccionó una base de datos del total del país, desagregada a nivel provincial y departamental (máximo nivel de desagregación permitida por las fuentes publicadas) de la cantidad total de asalariados agropecuarios y diversos indicadores de la estructura social y agraria (cantidad de explotaciones pobres, niveles de urbanización, distribución de la tierra, etc.).
Resumo:
Históricamente la captación estadística del empleo agropecuario (y más específicamente del empleo asalariado agropecuario) ha presentado una serie de problemas y limitaciones para las fuentes de datos tradicionales. Los elevados niveles de transitoriedad, estacionalidad, no registro e informalidad han tenido como consecuencia una serie de dificultades en su cuantificación por medio de las fuentes censales y muestrales tradicionales. Los procesos más recientes que atraviesan a esta fracción social (urbanización, acortamiento de ciclos productivos y ocupacionales, disminución de requerimientos de fuerza de trabajo por la mecanización de ciertas cosechas, etc.) parecen haber incrementado dichas dificultades. Trabajos previos realizados demuestran que los censos de población y agropecuarios arrojan diferentes resultados en la cuantificación de los asalariados del sector. Se presenta en este documento un análisis comparado de los resultados obtenidos en Argentina, por el Censo Nacional de Población y Vivienda de 2001 y el Censo Nacional Agropecuario de 2002. El objetivo buscado es realizar una aproximación a las diferentes cifras de asalariados en el agro que arrojan ambos relevamientos en todos los departamentos del país. A su vez, se intentará vincular dichas diferencias con los distintos territorios y distintas estructuras sociales y agrarias, buscando descubrir si permiten aportar a la explicación de aquellos resultados divergentes. Para ello se confeccionó una base de datos del total del país, desagregada a nivel provincial y departamental (máximo nivel de desagregación permitida por las fuentes publicadas) de la cantidad total de asalariados agropecuarios y diversos indicadores de la estructura social y agraria (cantidad de explotaciones pobres, niveles de urbanización, distribución de la tierra, etc.).
Resumo:
Históricamente la captación estadística del empleo agropecuario (y más específicamente del empleo asalariado agropecuario) ha presentado una serie de problemas y limitaciones para las fuentes de datos tradicionales. Los elevados niveles de transitoriedad, estacionalidad, no registro e informalidad han tenido como consecuencia una serie de dificultades en su cuantificación por medio de las fuentes censales y muestrales tradicionales. Los procesos más recientes que atraviesan a esta fracción social (urbanización, acortamiento de ciclos productivos y ocupacionales, disminución de requerimientos de fuerza de trabajo por la mecanización de ciertas cosechas, etc.) parecen haber incrementado dichas dificultades. Trabajos previos realizados demuestran que los censos de población y agropecuarios arrojan diferentes resultados en la cuantificación de los asalariados del sector. Se presenta en este documento un análisis comparado de los resultados obtenidos en Argentina, por el Censo Nacional de Población y Vivienda de 2001 y el Censo Nacional Agropecuario de 2002. El objetivo buscado es realizar una aproximación a las diferentes cifras de asalariados en el agro que arrojan ambos relevamientos en todos los departamentos del país. A su vez, se intentará vincular dichas diferencias con los distintos territorios y distintas estructuras sociales y agrarias, buscando descubrir si permiten aportar a la explicación de aquellos resultados divergentes. Para ello se confeccionó una base de datos del total del país, desagregada a nivel provincial y departamental (máximo nivel de desagregación permitida por las fuentes publicadas) de la cantidad total de asalariados agropecuarios y diversos indicadores de la estructura social y agraria (cantidad de explotaciones pobres, niveles de urbanización, distribución de la tierra, etc.).
Resumo:
This data set comprises a time series of aboveground community plant biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the main experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the main experiment, 82 grassland plots of 20 x 20 m were established from a pool of 60 species belonging to four functional groups (grasses, legumes, tall and small herbs). In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 4, 8, 16 and 60 species) and functional richness (1, 2, 3, 4 functional groups). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice a year just prior to mowing (during peak standing biomass twice a year, generally in May and August; in 2002 only once in September) on all experimental plots of the main experiment. This was done by clipping the vegetation at 3 cm above ground in up to four rectangles of 0.2 x 0.5 m per large plot. The location of these rectangles was assigned by random selection of new coordinates every year within the core area of the plots (i.e. the central 10 x 15 m). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material (i.e., dead plant material in the data file), and remaining plant material that could not be assigned to any category (i.e., unidentified plant material in the data file). All biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The data for individual samples and the mean over samples for the biomass measures on the community level are given. Overall, analyses of the community biomass data have identified species richness as well as functional group composition as important drivers of a positive biodiversity-productivity relationship.
Resumo:
This data set comprises a time series of aboveground community plant biomass (Sown plant community, Weed plant community, Dead plant material, and Unidentified plant material; all measured in biomass as dry weight) and species-specific biomass from the sown species of the dominance experiment plots of a large grassland biodiversity experiment (the Jena Experiment; see further details below). In the dominance experiment, 206 grassland plots of 3.5 x 3.5 m were established from a pool of 9 species that can be dominant in semi-natural grassland communities of the study region. In May 2002, varying numbers of plant species from this species pool were sown into the plots to create a gradient of plant species richness (1, 2, 3, 4, 6, and 9 species). Plots were maintained by bi-annual weeding and mowing. Aboveground community biomass was harvested twice a year, generally in May and August (in 2002 only once in September) on all experimental plots of the dominance experiment. This was done by clipping the vegetation at 3 cm above ground in two rectangles of 0.2 x 0.5 m per experimental plot. The location of these rectangles was assigned by random selection of new coordinates every year within the central area of the plots (excluding an outer edge of 50cm). The positions of the rectangles within plots were identical for all plots. The harvested biomass was sorted into categories: individual species for the sown plant species, weed plant species (species not sown at the particular plot), detached dead plant material, and remaining plant material that could not be assigned to any category. Biomass was dried to constant weight (70°C, >= 48 h) and weighed. Sown plant community biomass was calculated as the sum of the biomass of the individual sown species. The mean of both samples per plot and the individual measurements are provided in the data file. Overall, analyses of the community biomass data have identified species richness and the presence of particular species as an important driver of a positive biodiversity-productivity relationship.
Resumo:
The present data set provides a tab separated text file compressed in a zip archive. The file includes metadata for each TaraOceans V9 rDNA OTU including the following fields: md5sum = identifier of the representative (most abundant) sequence of the swarm; cid = identifier of the OTU; totab = total abundance of barcodes in this OTU; TARA_xxx = number of occurrences of barcodes in this OTU in each of the 334 samples;rtotab = total abundance of the representative barcode; pid = percentage identity of the representative barcode to the closest reference sequence from V9_PR2; lineage = taxonomic path assigned to the representative barcode ; refs = best hit reference sequence(s) with respect to the representative barcode ; taxogroup = high-taxonomic level assignation of the representative barcode. The file also includes three categories of functional annotations: (1) Chloroplast: yes, presence of permanent chloroplast; no, absence of permanent chloroplast ; NA, undetermined. (2) Symbiont (small partner): parasite, the species is a parasite; commensal, the species is a commensal; mutualist, the species is a mutualist symbiont, most often a microalgal taxon involved in photosymbiosis; no the species is not involved in a symbiosis as small partner; NA, undetermined. (3) Symbiont (host): photo, the host species relies on a mutualistic microalgal photosymbiont to survive (obligatory photosymbiosis); photo_falc, same as photo, but facultative relationship; photo_klep, the host species maintains chloroplasts from microalgal prey(s) to survive; photo_klep_falc, same as photo_klep, but facultative; Nfix, the host species must interact with a mutualistic symbiont providing N2 fixation to survive; Nfix_falc, same as Nfix, but facultative; no, the species is not involved in any mutualistic symbioses; NA, undetermined.
Resumo:
In 2005, the International Ocean Colour Coordinating Group (IOCCG) convened a working group to examine the state of the art in ocean colour data merging, which showed that the research techniques had matured sufficiently for creating long multi-sensor datasets (IOCCG, 2007). As a result, ESA initiated and funded the DUE GlobColour project (http://www.globcolour.info/) to develop a satellite based ocean colour data set to support global carbon-cycle research. It aims to satisfy the scientific requirement for a long (10+ year) time-series of consistently calibrated global ocean colour information with the best possible spatial coverage. This has been achieved by merging data from the three most capable sensors: SeaWiFS on GeoEye's Orbview-2 mission, MODIS on NASA's Aqua mission and MERIS on ESA's ENVISAT mission. In setting up the GlobColour project, three user organisations were invited to help. Their roles are to specify the detailed user requirements, act as a channel to the broader end user community and to provide feedback and assessment of the results. The International Ocean Carbon Coordination Project (IOCCP) based at UNESCO in Paris provides direct access to the carbon cycle modelling community's requirements and to the modellers themselves who will use the final products. The UK Met Office's National Centre for Ocean Forecasting (NCOF) in Exeter, UK, provides an understanding of the requirements of oceanography users, and the IOCCG bring their understanding of the global user needs and valuable advice on best practice within the ocean colour science community. The three year project kicked-off in November 2005 under the leadership of ACRI-ST (France). The first year was a feasibility demonstration phase that was successfully concluded at a user consultation workshop organised by the Laboratoire d'Océanographie de Villefranche, France, in December 2006. Error statistics and inter-sensor biases were quantified by comparison with insitu measurements from moored optical buoys and ship based campaigns, and used as an input to the merging. The second year was dedicated to the production of the time series. In total, more than 25 Tb of input (level 2) data have been ingested and 14 Tb of intermediate and output products created, with 4 Tb of data distributed to the user community. Quality control (QC) is provided through the Diagnostic Data Sets (DDS), which are extracted sub-areas covering locations of in-situ data collection or interesting oceanographic phenomena. This Full Product Set (FPS) covers global daily merged ocean colour products in the time period 1997-2006 and is also freely available for use by the worldwide science community at http://www.globcolour.info/data_access_full_prod_set.html. The GlobColour service distributes global daily, 8-day and monthly data sets at 4.6 km resolution for, chlorophyll-a concentration, normalised water-leaving radiances (412, 443, 490, 510, 531, 555 and 620 nm, 670, 681 and 709 nm), diffuse attenuation coefficient, coloured dissolved and detrital organic materials, total suspended matter or particulate backscattering coefficient, turbidity index, cloud fraction and quality indicators. Error statistics from the initial sensor characterisation are used as an input to the merging methods and propagate through the merging process to provide error estimates for the output merged products. These error estimates are a key component of GlobColour as they are invaluable to the users; particularly the modellers who need them in order to assimilate the ocean colour data into ocean simulations. An intensive phase of validation has been undertaken to assess the quality of the data set. In addition, inter-comparisons between the different merged datasets will help in further refining the techniques used. Both the final products and the quality assessment were presented at a second user consultation in Oslo on 20-22 November 2007 organised by the Norwegian Institute for Water Research (NIVA); presentations are available on the GlobColour WWW site. On request of the ESA Technical Officer for the GlobColour project, the FPS data set was mirrored in the PANGAEA data library.
Resumo:
This paper shows how an Armington-Krugman-Melitz encompassing module based on Dixon and Rimmer (2012) can be calibrated, and clarifies the choice of initial levels for two kinds of number of firms, or parameter values for two kinds of fixed costs, that enter a Melitz-type specification can be set freely to any preferred value, just as the cases we derive quantities from given value data assuming some of the initial prices to be unity. In consequence, only one kind of additional information, which is on the shape parameter related to productivity, just is required in order to incorporate Melitz-type monopolistic competition and heterogeneous firms into a standard applied general equilibrium model. To be a Krugman-type, nothing is needed. This enables model builders in applied economics to fully enjoy the featured properties of the theoretical models invented by Krugman (1980) and Melitz (2003) in practical policy simulations at low cost.
Resumo:
In a series of attempts to research and document relevant sloshing type phenomena, a series of experiments have been conducted. The aim of this paper is to describe the setup and data processing of such experiments. A sloshing tank is subjected to angular motion. As a result pressure registers are obtained at several locations, together with the motion data, torque and a collection of image and video information. The experimental rig and the data acquisition systems are described. Useful information for experimental sloshing research practitioners is provided. This information is related to the liquids used in the experiments, the dying techniques, tank building processes, synchronization of acquisition systems, etc. A new procedure for reconstructing experimental data, that takes into account experimental uncertainties, is presented. This procedure is based on a least squares spline approximation of the data. Based on a deterministic approach to the first sloshing wave impact event in a sloshing experiment, an uncertainty analysis procedure of the associated first pressure peak value is described.
Resumo:
Most implementations of parallel logic programming rely on complex low-level machinery which is arguably difflcult to implement and modify. We explore an alternative approach aimed at taming that complexity by raising core parts of the implementation to the source language level for the particular case of and-parallelism. Therefore, we handle a signiflcant portion of the parallel implementation mechanism at the Prolog level with the help of a comparatively small number of concurrency-related primitives which take care of lower-level tasks such as locking, thread management, stack set management, etc. The approach does not eliminate altogether modiflcations to the abstract machine, but it does greatly simplify them and it also facilitates experimenting with different alternatives. We show how this approach allows implementing both restricted and unrestricted (i.e., non fork-join) parallelism. Preliminary experiments show that the amount of performance sacriflced is reasonable, although granularity control is required in some cases. Also, we observe that the availability of unrestricted parallelism contributes to better observed speedups.