A Qualitative Study of the Assistive Technology Decision-Making Process in Four Pennsylvania School Districts

The purpose of this study was to gain an understanding of the Assistive Technology decision making process at four regional school districts in Pennsylvania. A qualitative case study research method involving the triangulation of data sources was implemented to collect and analyze data. Through an analysis of the data, three major topics emerged that will be addressed in the body of this paper: (a) the procedure for determining assistive technology needs and the dynamics of the decision-making process, b) the cohesiveness of Special Education and General Education programs, and c) major concerns that impact the delivery of assistive technology services.

Inhomogeneous source uniformization using a shell mixer Köhler integrator

High flux and high CRI may be achieved by combining different chips and/or phosphors. This, however, results in inhomogeneous sources that, when combined with collimating optics, typically produce patterns with undesired artifacts. These may be a combination of spatial, angular or color non-uniformities. In order to avoid these effects, there is a need to mix the light source, both spatially and angularly. Diffusers can achieve this effect, but they also increase the etendue (and reduce the brightness) of the resulting source, leading to optical systems of increased size and wider emission angles. The shell mixer is an optic comprised of many lenses on a shell covering the source. These lenses perform Kohler integration to mix the emitted light, both spatially and angularly. Placing it on top of a multi-chip Lambertian light source, the result is a highly homogeneous virtual source (i.e, spatially and angularly mixed), also Lambertian, which is located in the same position with essentially the same size (so the average brightness is not increased). This virtual light source can then be collimated using another optic, resulting in a homogeneous pattern without color separation. Experimental measurements have shown optical efficiency of the shell of 94%, and highly homogeneous angular intensity distribution of collimated beams, in good agreement with the ray-tracing simulations.

Quasi-aplanatic free-form V-groove collimators for LED colour mixing

Two quasi-aplanatic free-form solid V-groove collimators are presented in this work. Both optical designs are originally designed using the Simultaneous Multiple Surface method in three dimensions (SMS 3D). The second optically active surface in both free-form V-groove devices is designed a posteriori as a grooved surface. First two mirror (XX) design is designed in order to clearly show the design procedure and working principle of these devices. Second, RXI free-form design is comparable with existing RXI collimators; it is a compact and highly efficient design made of polycarbonate (PC) performing very good colour mixing of the RGGB LED sources placed off-axis. There have been presented rotationally symmetric non-aplanatic high efficiency collimators with colour mixing property to be improved and rotationally symmetric aplanatic devices with good colour mixing property and efficiency to be improved. The aim of this work was to design a free-form device in order to improve colour mixing property of the rotationally symmetric nonaplanatic RXI devices and the efficiency of the aplanatic ones.

Super resolution using a modified Spherical Geodesic Waveguide suitable for manufacturing

The previous publications (Miñano et al, 2011) have shown that using a Spherical Geodesic Waveguide (SGW), it can be achieved the super-resolution up to ? /500 close to a set of discrete frequencies. These frequencies are directly connected with the well-known Schumann resonance frequencies of spherical symmetric systems. However, the Spherical Geodesic Waveguide (SGW) has been presented as an ideal system, in which the technological obstacles or manufacturing feasibility and their influence on final results were not taken into account. In order to prove the concept of superresolution experimentally, the Spherical Geodesic Waveguide is modified according to the manufacturing requirements and technological limitations. Each manufacturing process imposes some imperfections which can affect the experimental results. Here, we analyze the influence of the manufacturing limitations on the super-resolution properties of the SGW. Beside the theoretical work, herein, there has been presented the experimental results, as well.

Single optical surface imaging designs with unconstrained object to image mapping

In this work, novel imaging designs with a single optical surface (either refractive or reflective) are presented. In some of these designs, both object and image shapes are given but mapping from object to image is obtained as a result of the design. In other designs, not only the mapping is obtained in the design process, but also the shape of the object is found. In the examples considered, the image is virtual and located at infinity and is seen from known pupil, which can emulate a human eye. In the first introductory part, 2D designs have been done using three different design methods: a SMS design, a compound Cartesian oval surface, and a differential equation method for the limit case of small pupil. At the point-size pupil limit, it is proven that these three methods coincide. In the second part, previous 2D designs are extended to 3D by rotation and the astigmatism of the image has been studied. As an advanced variation, the differential equation method is used to provide the freedom to control the tangential rays and sagittal rays simultaneously. As a result, designs without astigmatism (at the small pupil limit) on a curved object surface have been obtained. Finally, this anastigmatic differential equation method has been extended to 3D for the general case, in which freeform surfaces are designed.

Perfect imaging analysis of the spherical geodesic waveguide

Negative Refractive Lens (NRL) has shown that an optical system can produce images with details below the classic Abbe diffraction limit. This optical system transmits the electromagnetic fields, emitted by an object plane, towards an image plane producing the same field distribution in both planes. In particular, a Dirac delta electric field in the object plane is focused without diffraction limit to the Dirac delta electric field in the image plane. Two devices with positive refraction, the Maxwell Fish Eye lens (MFE) and the Spherical Geodesic Waveguide (SGW) have been claimed to break the diffraction limit using positive refraction with a different meaning. In these cases, it has been considered the power transmission from a point source to a point receptor, which falls drastically when the receptor is displaced from the focus by a distance much smaller than the wavelength. Although these systems can detect displacements up to ?/3000, they cannot be compared to the NRL, since the concept of image is different. The SGW deals only with point source and drain, while in the case of the NRL, there is an object and an image surface. Here, it is presented an analysis of the SGW with defined object and image surfaces (both are conical surfaces), similarly as in the case of the NRL. The results show that a Dirac delta electric field on the object surface produces an image below the diffraction limit on the image surface.

Aplanatic thin TIR lens

Aplanatic designs present great interest in the optics field since they are free from spherical aberration and linear coma at the axial direction. Nevertheless nowadays it cannot be found on literature any thin aplanatic design based on a lens. This work presents the first aplanatic thin lens (in this case a dome-shaped faceted TIR lens performing light collimation), designed for LED illumination applications. This device, due to its TIR structure (defined as an anomalous microstructure as we will see) presents good color-mixing properties. We will show this by means of raytrace simulations, as well as high optical efficiency.

VLC oriented energy efficient driver techniques

LEDs are substituting fluorescent and incandescent bulbs as illumination sources due to their low power consumption and long lifetime. Visible Light Communications (VLC) makes use of the LEDs short switching times to transmit information. Although LEDs switching speed is around Mbps range, higher speeds (hundred of Mbps) can be reached by using high bandwidth-efficiency modulation techniques. However, the use of these techniques requires a more complex driver which elevates drastically its power consumption. In this work an energy efficiency analysis of the different VLC modulation techniques and drivers is presented. Besides, the design of new schemes of VLC drivers is described.

Validación de sistemas constructivos de los cerramientos de la edificación mediante la aplicación de los métodos de decisión multicriterio : aplicación al catálogo de elementos constructivos del Código Técnico de la Edificación

Como punto de partida para el desarrollo de la Tesis, se mantiene la hipótesis de que es posible establecer métodos de evaluación global sobre el grado de utilidad de los sistemas constructivos correspondientes a los cerramientos de la edificación. Tales métodos habrían de posibilitar, de entre una serie finita de sistemas alternativos, cuáles de ellos son los objetivamente más adecuados para su selección en un entorno de decisión concreto, y habrían de permitir fundamentar la justificación objetiva de tal decisión. Paralelamente a esta hipótesis de carácter general, se planteó desde el inicio la necesidad de comprobación de una hipótesis de partida particular según la cual los sistemas constructivos basados en la utilización de componentes prefabricados, o procesos de puesta en obra con un alto grado de industrialización arrojarían valores de utilidad mayores que los sistemas tradicionales basados en la albañilería. Para la verificación de estas dos hipótesis de partida se ha procedido inicialmente a la selección de un conjunto coherente de doce sistemas de cerramientos de la edificación que pudiese servir como testigo de su diversidad potencial, para proceder a su valoración comparativa. El método de valoración propuesto ha entrado a considerar una serie de factores de diversa índole que no son reducibles a un único parámetro o magnitud que permitiese una valoración de tipo lineal sobre su idoneidad relativa, ni que permitiese establecer un grado de prelación entre los distintos sistemas constructivos alternativos de manera absoluta. Para resolver este tour de force o desafío metodológico se ha acudido a la aplicación de metodologías de valoración que nos permitiesen establecer de forma racional dicha comparativa. Nos referimos a una serie de metodologías provenientes en primera instancia de las ciencias exactas, que reciben la denominación de métodos de ayuda a la decisión multicriterio, y en concreto el denominado método ELECTRE. Inicialmente, se ha planteado la aplicación del método de análisis sobre doce sistemas constructivos seleccionados de tal forma que representasen de forma adecuada las tres categorías establecidas para caracterizar la totalidad de sistemas constructivos posibles; por peso, grado de prefabricación y grado de ventilación. Si bien la combinación de las tres categorías básicas anteriormente señaladas produce un total de 18 subcategorías conceptuales, tomamos finalmente doce subcategorías dado que consideramos que es un número operativo suficiente por extenso para el análisis propuesto y elimina tipos no relevantes. Aplicado el método propuesto, a estos doce sistemas constructivos “testigo”, se constata el mayor grado de utilidad de los sistemas prefabricados, pesados y no ventilados. Al hilo del análisis realizado en la Parte II de la Tesis sobre los doce sistemas constructivos “testigo”, se ha realizado un volcado de los sistemas constructivos incluidos en el Catalogo de Elementos Constructivos del CTE (versión 2010) sobre las dieciocho subcategorías definidas en dicha Parte II para caracterizar los sistemas constructivos “testigo”. Posteriormente, se ha procedido a una parametrización de la totalidad de sistemas constructivos para cerramientos de fachadas incluidos en este Catálogo. La parametrización sistemática realizada ha permitido establecer, mediante el cálculo del valor medio que adoptan los parámetros de los sistemas pertenecientes a una misma familia de las establecidas por el Catálogo, una caracterización comparativa del grado de utilidad de dichas familias, tanto en lo relativo a cada uno de los parámetros como en una valoración global de sus valores, de carácter indicativo. Una vez realizada una parametrización completa de la totalidad de sistemas constructivos incluidos en el Catálogo, se ha realizado una simulación de aplicación de la metodología de validación desarrollada en la Parte II de la presente Tesis, con el objeto de comprobar su adecuación al caso. En conclusión, el desarrollo de una herramienta de apoyo a la decisión multicriterio aplicada al Catálogo de Elementos constructivos del CTE se ha demostrado técnicamente viable y arroja resultados significativos. Se han diseñado dos sistemas constructivos mediante la aplicación de la herramienta desarrollada, uno de fachada no ventilada y otro de fachada ventilada. Comparados estos dos sistemas constructivos mejorados con otros sistemas constructivos analizados Se comprueba el alto grado de utilidad objetiva de los dos sistemas diseñados en relación con el resto. La realización de este ejercicio de diseño de un sistema constructivo específico, que responde a los requerimientos de un decisor concreto viene a demostrar, así pues, la utilidad del algoritmo propuesto en su aplicación a los procesos de diseño de los sistemas constructivos. La tesis incorpora dos innovaciones metodológicas y tres innovaciones instrumentales. ABSTRACT The starting point for the thesis is the hypothesis that it is possible to devise suitability degree evaluation methods of building enclosure systems. Such methods should allow optimizing appraisal, given a specific domain of decision, among a finite number of alternative systems, and provide objective justification of such decision. Along with the above mentioned general assumption, a second hypothesis whereby constructive systems based on the use of prefabricated components, or high industrialization degree work processes, would throw efficiency values higher than traditional masonry systems needed to be tested. In order to validate these two hypothesis a coherent set of twelve enclosure systems that could serve as a reference sample of their potential diversity was selected and a comparative evaluation was carried out. The valuation method proposed has considered several different factors that are neither reducible to a single parameter or magnitude that would allow a linear evaluation of their relative suitability nor allow to establishing an absolute priority ranking between different alternative constructive systems. In order to resolve this tour de force or methodological challenge, valuation methodologies that enable use establishing rational assessments were used. We are referring to a number of methodologies taken from the exact sciences field, usually known as aid methods for multi-criteria decision, in particular the so-called ELECTRE method. Even though the combination of the mentioned three basic categories result in eighteen conceptual sub categories, we are finally considering just twelve since we deem it adequately extended for the our intended purpose and eliminates non relevant instances. The method of analysis was initially applied to the set of twelve selected constructive systems is a way that they could represent adequately the three previously established categories set out to characterize all possible enclosure systems, namely weight, prefabrication degree and ventilation degree. Once the proposed method is applied to the sample systems, the higher efficiency of the prefabricated, heavy and not ventilated systems was confirmed. In line with the analysis in Part II of the thesis on the twelve chosen enclosure systems, it has done an uploading data of construction systems listed in the Catalogue of constructive elements of the CTE (version 2010) according the eighteen subcategories used in this part II to characterize the construction systems taken as sample. Subsequently, a parameterization of all enclosure facade systems included in this catalog has been undertaken. The systematic parameterization has allowed to set, by means of calculating the average values of the parameters of the systems belonging to the same family of those established by the Catalog, a comparative characterization of the efficiency degree of these families, both in relation to each parameter as to an overall evaluation of its values, in a indicative way. After the parameterization of all enclosure systems included in the Catalog, a simulation of validation methodology application developed in Part II of this Thesis has been made, in order to assess its consistency to the referred case. In conclusion, the development of a multi-criteria decision aid tool, applied to the CTE Catalog of constructive elements, has proved to be technically feasible and yields significant results. Two building systems through the application of the developed tool, a non-ventilated façade and a ventilated façade have been designed. Comparing these two improved construction systems with other building systems analyzed, we were able to assess the high degree of objective efficiency of the two systems designed in relation to the rest. The exercise of designing a specific enclosure system that meets the requirements of a particular decision-maker hence shows the suitability of the proposed algorithm applied to the process of enclosure systems design. This Thesis includes two methodological innovations and three instrumental innovations.

Crypto at the Time of Surveillance: Sharing with the Cloud

These days as we are facing extremely powerful attacks on servers over the Internet (say, by the Advanced Persistent Threat attackers or by Surveillance by powerful adversary), Shamir has claimed that “Cryptography is Ineffective”and some understood it as “Cryptography is Dead!” In this talk I will discuss the implications on cryptographic systems design while facing such strong adversaries. Is crypto dead or we need to design it better, taking into account, mathematical constraints, but also systems vulnerability constraints. Can crypto be effective at all when your computer or your cloud is penetrated? What is lost and what can be saved? These are very basic issues at this point of time, when we are facing potential loss of privacy and security.

Exact Numerical Processing

Paper submitted to Euromicro Symposium on Digital Systems Design (DSD), Belek-Antalya, Turkey, 2003.

The utilitarian and hedonic outcomes of music information seeking in everyday life

This qualitative study focuses on what contributes to making a music information-seeking experience satisfying in the context of everyday life. Data were collected through in-depth interviews conducted with 15 younger adults (18 to 29 years old). The analysis revealed that satisfaction could depend on both hedonic (i.e., experiencing pleasure) and utilitarian outcomes. It was found that two types of utilitarian outcomes contributed to satisfaction: (1) the acquisition of music, and (2) the acquisition of information about music. Information about music was gathered to (1) enrich the listening experience, (2) increase one's music knowledge, and/or (3) optimize future acquisition. This study contributes to a better understanding of music information-seeking behavior in recreational contexts. It also has implications for music information retrieval systems design: results suggest that these systems should be engaging, include a wealth of extra-musical information, allow users to navigate among music items, and encourage serendipitous encountering of music.

Real options in the context of innovation and development policies and practices. ACES Working Papers, 2012

This paper proposes to build on previous research on the use of real options in strategic decision making (Carayannis and Sipp, 2010) and instill some real options-related concepts stemming from systems design, more particularly engineering. It also builds on previously-established concepts of strategic knowledge serendipity and arbitrage and strategic knowledge co-opetition, co-evolution and co-specialization developed by Carayannis (2009). The application of real options “in” system and real options to innovation and innovation policies demonstrate how embedded real options can more effectively be identified and therefore the decision to execute them or not more effectively made.

The utilitarian and hedonic outcomes of music information seeking in everyday life

This qualitative study focuses on what contributes to making a music information-seeking experience satisfying in the context of everyday life. Data were collected through in-depth interviews conducted with 15 younger adults (18 to 29 years old). The analysis revealed that satisfaction could depend on both hedonic (i.e., experiencing pleasure) and utilitarian outcomes. It was found that two types of utilitarian outcomes contributed to satisfaction: (1) the acquisition of music, and (2) the acquisition of information about music. Information about music was gathered to (1) enrich the listening experience, (2) increase one's music knowledge, and/or (3) optimize future acquisition. This study contributes to a better understanding of music information-seeking behavior in recreational contexts. It also has implications for music information retrieval systems design: results suggest that these systems should be engaging, include a wealth of extra-musical information, allow users to navigate among music items, and encourage serendipitous encountering of music.

Space management: an application of dynamic lane assignment. Interim report.

Texas Department of Transportation, Austin