Comparing Remote Data Transfer Rates of Compact Muon Solenoid Jobs with Xrootd and Lustre

To explore the feasibility of processing Compact Muon Solenoid (CMS) analysis jobs across the wide area network, the FIU CMS Tier-3 center and the Florida CMS Tier-2 center designed a remote data access strategy. A Kerberized Lustre test bed was installed at the Tier-2 with the design to provide storage resources to private-facing worker nodes at the Tier-3. However, the Kerberos security layer is not capable of authenticating resources behind a private network. As a remedy, an xrootd server on a public-facing node at the Tier-3 was installed to export the file system to the private-facing worker nodes. We report the performance of CMS analysis jobs processed by the Tier-3 worker nodes accessing data from a Kerberized Lustre file. The processing performance of this configuration is benchmarked against a direct connection to the Lustre file system, and separately, where the xrootd server is near the Lustre file system.

Integrating functional connectivity and climate change in the design of protected area networks

Le rapide déclin actuel de la biodiversité est inquiétant et les activités humaines en sont la cause directe. De nombreuses aires protégées ont été mises en place pour contrer cette perte de biodiversité. Afin de maximiser leur efficacité, l’amélioration de la connectivité fonctionnelle entre elles est requise. Les changements climatiques perturbent actuellement les conditions environnementales de façon globale. C’est une menace pour la biodiversité qui n’a pas souvent été intégrée lors de la mise en place des aires protégées, jusqu’à récemment. Le mouvement des espèces, et donc la connectivité fonctionnelle du paysage, est impacté par les changements climatiques et des études ont montré qu’améliorer la connectivité fonctionnelle entre les aires protégées aiderait les espèces à faire face aux impacts des changements climatiques. Ma thèse présente une méthode pour concevoir des réseaux d’aires protégées tout en tenant compte des changements climatiques et de la connectivité fonctionnelle. Mon aire d’étude est la région de la Gaspésie au Québec (Canada). La population en voie de disparition de caribou de la Gaspésie-Atlantique (Rangifer tarandus caribou) a été utilisée comme espèce focale pour définir la connectivité fonctionnelle. Cette petite population subit un déclin continu dû à la prédation et la modification de son habitat, et les changements climatiques pourraient devenir une menace supplémentaire. J’ai d’abord construit un modèle individu-centré spatialement explicite pour expliquer et simuler le mouvement du caribou. J’ai utilisé les données VHF éparses de la population de caribou et une stratégie de modélisation patron-orienté pour paramétrer et sélectionner la meilleure hypothèse de mouvement. Mon meilleur modèle a reproduit la plupart des patrons de mouvement définis avec les données observées. Ce modèle fournit une meilleure compréhension des moteurs du mouvement du caribou de la Gaspésie-Atlantique, ainsi qu’une estimation spatiale de son utilisation du paysage dans la région. J’ai conclu que les données éparses étaient suffisantes pour ajuster un modèle individu-centré lorsqu’utilisé avec une modélisation patron-orienté. Ensuite, j’ai estimé l’impact des changements climatiques et de différentes actions de conservation sur le potentiel de mouvement du caribou. J’ai utilisé le modèle individu-centré pour simuler le mouvement du caribou dans des paysages hypothétiques représentant différents scénarios de changements climatiques et d’actions de conservation. Les actions de conservation représentaient la mise en place de nouvelles aires protégées en Gaspésie, comme définies par le scénario proposé par le gouvernement du Québec, ainsi que la restauration de routes secondaires à l’intérieur des aires protégées. Les impacts des changements climatiques sur la végétation, comme définis dans mes scénarios, ont réduit le potentiel de mouvement du caribou. La restauration des routes était capable d’atténuer ces effets négatifs, contrairement à la mise en place des nouvelles aires protégées. Enfin, j’ai présenté une méthode pour concevoir des réseaux d’aires protégées efficaces et j’ai proposé des nouvelles aires protégées à mettre en place en Gaspésie afin de protéger la biodiversité sur le long terme. J’ai créé de nombreux scénarios de réseaux d’aires protégées en étendant le réseau actuel pour protéger 12% du territoire. J’ai calculé la représentativité écologique et deux mesures de connectivité fonctionnelle sur le long terme pour chaque réseau. Les mesures de connectivité fonctionnelle représentaient l’accès général aux aires protégées pour le caribou de la Gaspésie-Atlantique ainsi que son potentiel de mouvement à l’intérieur. J’ai utilisé les estimations de potentiel de mouvement pour la période de temps actuelle ainsi que pour le futur sous différents scénarios de changements climatiques pour représenter la connectivité fonctionnelle sur le long terme. Le réseau d’aires protégées que j’ai proposé était le scénario qui maximisait le compromis entre les trois caractéristiques de réseau calculées. Dans cette thèse, j’ai expliqué et prédit le mouvement du caribou de la Gaspésie-Atlantique sous différentes conditions environnementales, notamment des paysages impactés par les changements climatiques. Ces résultats m’ont aidée à définir un réseau d’aires protégées à mettre en place en Gaspésie pour protéger le caribou au cours du temps. Je crois que cette thèse apporte de nouvelles connaissances sur le comportement de mouvement du caribou de la Gaspésie-Atlantique, ainsi que sur les actions de conservation qui peuvent être prises en Gaspésie afin d’améliorer la protection du caribou et de celle d’autres espèces. Je crois que la méthode présentée peut être applicable à d’autres écosystèmes aux caractéristiques et besoins similaires.

THE NETWORK EMBEDDEDNESS OF A FOREIGN SALES SUBSIDIARY The subsidiary personnel perspective

This study focuses on the network embeddedness of a subsidiary of a multinational company. Academic research has identified the rising role of geographically dispersed subsidiaries as valuable sources of strategic knowledge and value to the whole multinational company. Moreover, previous research suggests that in order to gather this knowledge and transfer it across the multinational company, a subsidiary needs to be insider, i.e. embedded, in both its local external network as well as in its internal corporate network. The purpose of this study is to describe the network embeddedness of a foreign sales subsidiary from the subsidiary personnel perspective and hence increase understanding on the phenomenon and provide suggestions to enhance overall subsidiary embeddedness. The empirical study was based on a theoretical framework on subsidiary network embeddedness and comprised a qualitative single-case study in a French sales subsidiary of a Nordic multinational company. Data collection included nine semi-structured interviews and six Network Pictures drawing tasks. Altogether eight people out of subsidiary staff of eleven participated in the study providing relatively exhaustive overview of the subsidiary personnel perspective. Based on the collected data, the relationships toward the most relevant network actors, both internal and external were identified and their impact on the subsidiary embeddedness were analyzed separately. Moreover, the subsidiary’s simultaneous embeddedness in both internal and external network, that is, the subsidiary dual embeddedness, was discussed to increase understanding how subsidiary personnel perceive their role between the two networks and its impact on the subsidiary activities. The findings of the study suggest that the subsidiary personnel perceives strong external embeddedness increasing internal and dual-embeddedness since intensive external collaboration requires including and activating other corporate units as well. The role of the local sales subsidiary is to act as the interpreter and connector between the internal and external network actors. Hence, by actively promoting relationship linkages between internal and external actors, the subsidiary may adopt an active role beyond its original corporate mandate. In order to achieve this, both managers on the subsidiary and corporate level need to promote open communication and increase cultural understanding between different corporate units.

Plataforma interactiva para edifícios inteligentes com controlo preditivo

Esta dissertação desenvolve uma plataforma de controlo interactiva para edifícios inteligentes através de um sistema SCADA (Supervisory Control And Data Acquisition). Este sistema SCADA integra diferentes tipos de informações provenientes das várias tecnologias presentes em edifícios modernos (controlo da ventilação, temperatura, iluminação, etc.). A estratégia de controlo desenvolvida implementa um controlador em cascada hierárquica onde os "loops" interiores são executados pelos PLC's locais (Programmable Logic Controller), e o "loop" exterior é gerido pelo sistema SCADA centralizado, que interage com a rede local de PLC's. Nesta dissertação é implementado um controlador preditivo na plataforma SCADA centralizada. São apresentados testes efectuados para o controlo da temperatura e luminosidade de salas com uma grande área. O controlador preditivo desenvolvido tenta optimizar a satisfação dos utilizadores, com base nas preferências introduzidas em várias interfaces distribuídas, sujeito às restrições de minimização do desperdício de energia. De forma a executar o controlador preditivo na plataforma SCADA foi desenvolvido um canal de comunicação para permitir a comunicação entre a aplicação SCADA e a aplicação MATLAB, onde o controlador preditivo é executado. ABSTRACT: This dissertation develops an operational control platform for intelligent buildings using a SCADA system (Supervisory Control And Data Acquisition). This SCADA system integrates different types of information coming from the several technologies present in modem buildings (control of ventilation, temperature, illumination, etc.). The developed control strategy implements a hierarchical cascade controller where inner loops are performed by local PLCs (Programmable Logic Controller), and the outer loop is managed by the centralized SCADA system, which interacts with the entire local PLC network. ln this dissertation a Predictive Controller is implemented at the centralized SCADA platform. Tests applied to the control of temperature and luminosity in huge­area rooms are presented. The developed Predictive Controller tries to optimize the satisfaction of user explicit preferences coming from several distributed user-interfaces, subjected to the constraints of energy waste minimization. ln order to run the Predictive Controller at the SCADA platform a communication channel was developed to allow communication between the SCADA application and the MATLAB application where the Predictive Controller runs.

Optical Wireless Communication for Mobile Platforms

The past few decades have witnessed the widespread adaptation of wireless devices such as cellular phones and Wifi-connected laptops, and demand for wireless communication is expected to continue to increase. Though radio frequency (RF) communication has traditionally dominated in this application space, recent decades have seen an increasing interest in the use of optical wireless (OW) communication to supplement RF communications. In contrast to RF communication technology, OW systems offer the use of largely unregulated electromagnetic spectrum and large bandwidths for communication. They also offer the potential to be highly secure against jamming and eavesdropping. Interest in OW has become especially keen in light of the maturation of light-emitting diode (LED) technology. This maturation, and the consequent emerging ubiquity of LED technology in lighting systems, has motivated the exploration of LEDs for wireless communication purposes in a wide variety of applications. Recent interest in this field has largely focused on the potential for indoor local area networks (LANs) to be realized with increasingly common LED-based lighting systems. We envision the use of LED-based OW to serve as a supplement to RF technology in communication between mobile platforms, which may include automobiles, robots, or unmanned aerial vehicles (UAVs). OW technology may be especially useful in what are known as RF-denied environments, in which RF communication may be prohibited or undesirable. The use of OW in these settings presents major challenges. In contrast to many RF systems, OWsystems that operate at ranges beyond a few meters typically require relatively precise alignment. For example, some laser-based optical wireless communication systems require alignment precision to within small fractions of a degree. This level of alignment precision can be difficult to maintain between mobile platforms. Additionally, the use of OW systems in outdoor settings presents the challenge of interference from ambient light, which can be much brighter than any LED transmitter. This thesis addresses these challenges to the use of LED-based communication between mobile platforms. We propose and analyze a dual-link LED-based system that uses one link with a wide transmission beam and relaxed alignment constraints to support a more narrow, precisely aligned, higher-data-rate link. The use of an optical link with relaxed alignment constraints to support the alignment of a more precisely aligned link motivates our exploration of a panoramic imaging receiver for estimating the range and bearing of neighboring nodes. The precision of such a system is analyzed and an experimental system is realized. Finally, we present an experimental prototype of a self-aligning LED-based link.

JOINT ENERGY BEAMFORMING AND TIME ASSIGNMENT FOR COOPERATIVE WIRELESS POWERED NETWORKS

Wireless power transfer (WPT) and radio frequency (RF)-based energy har- vesting arouses a new wireless network paradigm termed as wireless powered com- munication network (WPCN), where some energy-constrained nodes are enabled to harvest energy from the RF signals transferred by other energy-sufficient nodes to support the communication operations in the network, which brings a promising approach for future energy-constrained wireless network design. In this paper, we focus on the optimal WPCN design. We consider a net- work composed of two communication groups, where the first group has sufficient power supply but no available bandwidth, and the second group has licensed band- width but very limited power to perform required information transmission. For such a system, we introduce the power and bandwidth cooperation between the two groups so that both group can accomplish their expected information delivering tasks. Multiple antennas are employed at the hybrid access point (H-AP) to en- hance both energy and information transfer efficiency and the cooperative relaying is employed to help the power-limited group to enhance its information transmission throughput. Compared with existing works, cooperative relaying, time assignment, power allocation, and energy beamforming are jointly designed in a single system. Firstly, we propose a cooperative transmission protocol for the considered system, where group 1 transmits some power to group 2 to help group 2 with information transmission and then group 2 gives some bandwidth to group 1 in return. Sec- ondly, to explore the information transmission performance limit of the system, we formulate two optimization problems to maximize the system weighted sum rate by jointly optimizing the time assignment, power allocation, and energy beamforming under two different power constraints, i.e., the fixed power constraint and the aver- age power constraint, respectively. In order to make the cooperation between the two groups meaningful and guarantee the quality of service (QoS) requirements of both groups, the minimal required data rates of the two groups are considered as constraints for the optimal system design. As both problems are non-convex and have no known solutions, we solve it by using proper variable substitutions and the semi-definite relaxation (SDR). We theoretically prove that our proposed solution method can guarantee to find the global optimal solution. Thirdly, consider that the WPCN has promising application potentials in future energy-constrained net- works, e.g., wireless sensor network (WSN), wireless body area network (WBAN) and Internet of Things (IoT), where the power consumption is very critical. We investigate the minimal power consumption optimal design for the considered co- operation WPCN. For this, we formulate an optimization problem to minimize the total consumed power by jointly optimizing the time assignment, power allocation, and energy beamforming under required data rate constraints. As the problem is also non-convex and has no known solutions, we solve it by using some variable substitutions and the SDR method. We also theoretically prove that our proposed solution method for the minimal power consumption design guarantees the global optimal solution. Extensive experimental results are provided to discuss the system performance behaviors, which provide some useful insights for future WPCN design. It shows that the average power constrained system achieves higher weighted sum rate than the fixed power constrained system. Besides, it also shows that in such a WPCN, relay should be placed closer to the multi-antenna H-AP to achieve higher weighted sum rate and consume lower total power.

Intrusion Detection Systems in SDN-based Self-Healing PMU Networks

Nowadays, Power grids are critical infrastructures on which everything else relies, and their correct behavior is of the highest priority. New smart devices are being deployed to be able to manage and control power grids more efficiently and avoid instability. However, the deployment of such smart devices like Phasor Measurement Units (PMU) and Phasor Data Concentrators (PDC), open new opportunities for cyber attackers to exploit network vulnerabilities. If a PDC is compromised, all data coming from PMUs to that PDC is lost, reducing network observability. Our approach to solve this problem is to develop an Intrusion detection System (IDS) in a Software-defined network (SDN). allowing the IDS system to detect compromised devices and use that information as an input for a self-healing SDN controller, which redirects the data of the PMUs to a new, uncompromised PDC, maintaining the maximum possible network observability at every moment. During this research, we have successfully implemented Self-healing in an example network with an SDN controller based on Ryu controller. We have also assessed intrinsic vulnerabilities of Wide Area Management Systems (WAMS) and SCADA networks, and developed some rules for the Intrusion Detection system which specifically protect vulnerabilities of these networks. The integration of the IDS and the SDN controller was also successful. \\To achieve this goal, the first steps will be to implement an existing Self-healing SDN controller and assess intrinsic vulnerabilities of Wide Area Measurement Systems (WAMS) and SCADA networks. After that, we will integrate the Ryu controller with Snort, and create the Snort rules that are specific for SCADA or WAMS systems and protocols.

Photovoltaic power forecast modeling with artificial neural networks

Dissertação de Mestrado, Engenharia Eletrónica e Telecomunicações, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Firms’ knowledge search and local knowledge externalities in innovation performance

We use an augmented version of the UK Innovation Surveys 4–7 to explore firm-level and local area openness externalities on firms’ innovation performance. We find strong evidence of the value of external knowledge acquisition both through interactive collaboration and non-interactive contacts such as demonstration effects, copying or reverse engineering. Levels of knowledge search activity remain well below the private optimum, however, due perhaps to informational market failures. We also find strong positive externalities of openness resulting from the intensity of local interactive knowledge search—a knowledge diffusion effect. However, there are strong negative externalities resulting from the intensity of local non-interactive knowledge search—a competition effect. Our results provide support for local initiatives to support innovation partnering and counter illegal copying or counterfeiting. We find no significant relationship between either local labour quality or employment composition and innovative outputs.

WEB RÁDIO: AS REDES DE FORMAÇÃO E A PERSPECTIVA GEOGRÁFICA NA COMUNICAÇÃO DO CIBERESPAÇO

Paulatinamente o mundo se transforma e as maneiras de se comunicar com ele também. Os avanços tecnológicos, principalmente na área da comunicação, têm implicado no surgimento de novas técnicas e novas estratégias para a educação e para o ensino da Geografia. Contudo, buscamos avaliar em nossa pesquisa a maneira pela qual nos inserir como geógrafos no ciberespaço, atuando de forma a produzir conteúdo geográfico na grande rede da WAN[1], e ainda utilizando-se dessa ferramenta, participar do processo de construção e colaboração das TIC’S, voltadas para a educação e difundi-las através da grande rede. Desta maneira propondo meios alternativos que contribuam para a formação a docência e seja alicerce da formação básica. Nesta perspectiva, avaliamos o local e as condições das quais partimos, em uma pesquisa de caráter inicial, ocasionando implicações positivas referentes ao alcance de escalas maiores, alianças comunitárias que fortaleçam os espaços de resistência e refletem a práxis geográfica. Neste sentido, a pesquisa é fomentada pelo Laboratório Áudio Visual Cinema Paraíso e permeará rasamente buscando linear o contexto em que nos inserimos.

mHealth-based Methods for Neuromotor Assessment and Rehabilitation

Recent years observed massive growth in wearable technology, everything can be smart: phones, watches, glasses, shirts, etc. These technologies are prevalent in various fields: from wellness/sports/fitness to the healthcare domain. The spread of this phenomenon led the World-Health-Organization to define the term 'mHealth' as "medical and public health practice supported by mobile devices, such as mobile phones, patient monitoring devices, personal digital assistants, and other wireless devices". Furthermore, mHealth solutions are suitable to perform real-time wearable Biofeedback (BF) systems: sensors in the body area network connected to a processing unit (smartphone) and a feedback device (loudspeaker) to measure human functions and return them to the user as (bio)feedback signal. During the COVID-19 pandemic, this transformation of the healthcare system has been dramatically accelerated by new clinical demands, including the need to prevent hospital surges and to assure continuity of clinical care services, allowing pervasive healthcare. Never as of today, we can say that the integration of mHealth technologies will be the basis of this new era of clinical practice. In this scenario, this PhD thesis's primary goal is to investigate new and innovative mHealth solutions for the Assessment and Rehabilitation of different neuromotor functions and diseases. For the clinical assessment, there is the need to overcome the limitations of subjective clinical scales. Creating new pervasive and self-administrable mHealth solutions, this thesis investigates the possibility of employing innovative systems for objective clinical evaluation. For rehabilitation, we explored the clinical feasibility and effectiveness of mHealth systems. In particular, we developed innovative mHealth solutions with BF capability to allow tailored rehabilitation. The main goal that a mHealth-system should have is improving the person's quality of life, increasing or maintaining his autonomy and independence. To this end, inclusive design principles might be crucial, next to the technical and technological ones, to improve mHealth-systems usability.

Perfil de pacientes que evoluem para óbito por tuberculose no município de São Paulo, 2002

OBJETIVO: Descrever o perfil de pacientes adultos residentes no município de São Paulo que evoluíram para óbito associado à tuberculose, segundo fatores biológicos, ambientais e institucionais. MÉTODOS: Estudo descritivo, abrangendo todos os óbitos por tuberculose (N=416) ocorridos em 2002, entre maiores de 15 anos. Os dados analisados foram obtidos do Sistema Municipal de Informações de Mortalidade, prontuários hospitalares, Serviço de Verificação de Óbitos e Sistema de Vigilância de Tuberculose. Os cálculos dos riscos relativos e intervalos de confiança de 95 por cento (IC 95 por cento) tiveram como referência o sexo feminino, grupo de 15 a 29 anos, e os naturais do Estado de São Paulo. A análise comparativa usou o teste do qui-quadrado de Pearson e o exato de Fisher para variáveis categóricas e o teste Kruskal-Wallis para variáveis contínuas. RESULTADOS: Do total de óbitos, 78 por cento apresentavam a forma pulmonar; o diagnóstico foi efetuado após a morte em 30 por cento e em unidades de atendimento primário em 14 por cento dos casos; 44 por cento não iniciaram tratamento; 49 por cento não foram notificados; 76 por cento eram homens e a mediana da idade foi de 51 anos; 52 por cento tinham até quatro anos de estudo, 4 por cento eram prováveis moradores de rua. As taxas de mortalidade aumentavam com a idade, sendo de 5,0/100.000 no município, variando de zero a 35, conforme o distrito. Para 82 de 232 pacientes com registro de tratamento, havia referência de tratamento anterior, e desses, 41 o haviam abandonado. Constatou-se presença de diabetes (16 por cento), doença pulmonar obstrutiva crônica (19 por cento), HIV (11 por cento), tabagismo (71 por cento) e alcoolismo (64 por cento) nos pacientes. CONCLUSÕES: Homens acima de 50 anos, migrantes e residentes em distritos com baixo Índice de Desenvolvimento Humano apresentam maiores riscos de óbito. )A pouca escolaridade e apresentar co-morbidades são características importante Observou-se baixa participação das unidades básicas de saúde no diagnóstico e a elevada sub-notificação

Robust STATCOM control for the stabilisation of fixed-speed wind turbines during low voltages

This paper presents a robust voltage control scheme for fixed-speed wind generators using a static synchronous compensator (STATCOM) controller. To enable a linear and robust control framework with structured uncertainty, the overall system is represented by a linear part plus a nonlinear part that covers an operating range of interest required to ensure stability during severe low voltages. The proposed methodology is flexible and readily applicable to larger wind farms of different configurations. The performance of the control strategy is demonstrated on a two area test system. Large disturbance simulations demonstrate that the proposed controller enhances voltage stability as well as transient stability of induction generators during low voltage ride through (LVRT) transients and thus enhances the LVRT capability. (C) 2011 Elsevier Ltd. All rights reserved.

Data Mining Applied to Harmonic Current Sources Identification in Residential Consumers

This work proposes a method based on both preprocessing and data mining with the objective of identify harmonic current sources in residential consumers. In addition, this methodology can also be applied to identify linear and nonlinear loads. It should be emphasized that the entire database was obtained through laboratory essays, i.e., real data were acquired from residential loads. Thus, the residential system created in laboratory was fed by a configurable power source and in its output were placed the loads and the power quality analyzers (all measurements were stored in a microcomputer). So, the data were submitted to pre-processing, which was based on attribute selection techniques in order to minimize the complexity in identifying the loads. A newer database was generated maintaining only the attributes selected, thus, Artificial Neural Networks were trained to realized the identification of loads. In order to validate the methodology proposed, the loads were fed both under ideal conditions (without harmonics), but also by harmonic voltages within limits pre-established. These limits are in accordance with IEEE Std. 519-1992 and PRODIST (procedures to delivery energy employed by Brazilian`s utilities). The results obtained seek to validate the methodology proposed and furnish a method that can serve as alternative to conventional methods.