Halting Childhood Obesity in Connecticut

The Practicum Project is a supervised service-learning experience that integrates curriculum with hands-on experience in a public health setting. All 2nd year students are expected to work collaboratively in assessing the extent, causes and public health responses to a selected public health problem confronting citizens of Connecticut. The focal topic for the 2005 Project was Control of Childhood Obesity in Connecticut. During this past spring, 25 students of our program, working alongside and in partnership with more than 130 community-based stakeholders across Connecticut, completed 2,083 hours of service-learning in pursuit of answers to 3 questions: Can the present and future burden of childhood obesity be estimated for Connecticut? What is the current capacity of Connecticut’s health and social service system to address the crisis we confront today? Can new policy and regulatory strategies be put forth to reduce the severity and scope of the problem? This occasion and the accompanying report mark the completion of their project and acknowledges the considerable contributions that many have made to the success of this educational experience. Through those combined efforts, students gained experience and skill addressing one of the most significant public health issues of our time; also, they gained insight into the breadth and capacity of our public health system and established invaluable relationships with public health practitioners, agencies and institutions around the state. Their report documents a rich campus-community partnership to advance public health goals.

The Challenges of Living with Disabilities in Connecticut

The UCONN Master of Public Health Program’s Practicum Project The Practicum Project is a supervised service-learning experience that integrates curriculum with hands-on experience in a public health setting. All 2nd year students are expected to work collaboratively in assessing the extent, causes and public health responses to a selected public health problem confronting citizens of Connecticut. The focal topic for the 2007 Project was The Challenges of Living with Disabilities in Connecticut. During this past spring, 17 students of our program, working alongside 50 communitybased stakeholders across Connecticut, completed 1,800 hours of service-learning in pursuit of answers to the following questions: • How is the concept of disability defined by various health and social service providers? • What are the estimated numbers of persons living with disabilities in Connecticut and what is the range of their disabling conditions? • What arrays of services are in place to facilitate the full integration of persons with disabilities into their communities? • What opportunities exist to expand our understanding of the challenges faced by persons living with disabilities and promote public policy on their behalf? This occasion and the accompanying report marks the completion of the 3rd in a series of practicum project reports by UCONN MPH students. Through their combined efforts, students gained experience and skill addressing one of the most significant public health issues of our time; they gained insight into the breadth and capacity of our public health system and established invaluable relationships with public health practitioners, agencies and institutions around the state. Their report documents a rich campus-community partnership to advance public health goals.

Systematic review of interventions designed to reduce screen time in children and adolescents

This descriptive systematic review describes intervention trials for children and youth that targeted screen time (ST) as a way to prevent or control obesity and measured ST, and at least one of the following: physical activity, dietary intake, and adiposity. Both “hands-on” (e.g., video games) and “hands free” (e.g., television viewing) ST were included. Published, completed intervention trials (k=12), not-yet-published, completed trials (k=6), and in-progress trials (k=11) were identified through searches of electronic databases, including trial registries and bibliographies of eligible study reports. Study characteristics of the 29 identified trials were coded and presented in evidence tables. Considerable attention was paid to the type of ST addressed, measures used, and the type of interventions. Based on the number of in-progress and not-yet-published trials, the number of completed, published reports will double in the next three years. Most of the studies were funded by federal sources. General populations, not restricted by race, gender, or weight status, were targets of most interventions with children ages 9-12 yeas as the modal age group. Most trials used randomized control trials in which the majority of control or comparison group received an intervention. The mean number of participants was 242.8 (SD=314.7) and interventions were delivered over an average of 10.5 months and consisted of approximately 16 sessions, with a total time of about eight hours. The majority of completed trials evaluate each of the four constructs, however, most studies have more than one measure to assess each construct (e.g., BMI and tricep skinfold thickness to evaluate adiposity) and rarely did studies use the same measures. This is likely why the majority of studies produced at least one significant intervention effect on each outcome that was assessed. The four major outcomes should be evaluated in all interventions attempting to reduce screen time in order to determine the mechanisms involved that may contribute to obesity. More importantly researchers should work together to determine the best measures to evaluate the four main constructs to allow studies to be compared. Another area for consensus is the definition of ST. ^

A project to improve the information seeking skills and increase the use of evidence-based research in public health practice

The ability of public health practitioners (PHPs) to work efficiently and effectively is negatively impacted by their lack of knowledge of the broad range of evidence-based practice information resources and tools that can be utilized to guide them in their development of health policies and programs. This project, a three-hour continuing education hands-on workshop with supporting resources, was designed to increase knowledge and skills of these resources. The workshop was presented as a pre-conference continuing education program for the Texas Public Health Association (TPHA) 2008 Annual Conference. Topics included: identification of evidence-based practice resources to aid in the development of policies and programs; identification of sources of publicly available data; utilization of data for community assessments; and accessing and searching the literature through a collection of databases available to all citizens of Texas. Supplemental resources included a blog that served as a gateway to the resources explored during the presentation, a community assessment workbook that incorporates both Healthy People 2010 objectives and links to reliable sources of data, and handouts providing additional instruction on the use of the resources covered during the workshop.^ Before- and after-workshop surveys based on Kirkpatrick's 4-level model of evaluation and the Theory of Planned Behavior were administered. Of the questions related to the trainer, the workshop, and the usefulness of the workshop, participants gave "Good" to "Excellent" responses to all one question. Confidence levels overall increased a statistically significant amount; measurements of attitude, social norms, and control showed no significant differences before and after the workshop. Lastly, participants indicated they were likely to use resources shown during the workshop within a one to three month time period on average. ^ The workshop and creation of supplemental resources served as a pilot for a funded project that will be continued with the development and delivery of four 4-week long webinar-based training sessions to be completed by December 2008. ^

Marketing physical activity and healthy eating: A literature review of recent social marketing campaigns and development of a social marketing plan for the CATCH program

Background. This culminating experience project was inspired by an independent study conducted at The University of Texas School of Public Health with Dr. Andrew Springer, DrPH, who works on the evaluation of the Coordinated Approach to Child Health (CATCH) program in Travis County, Texas. It was indicated that a social marketing plan could enhance current efforts for the CATCH program. The aims of the project were to (1) review and synthesize literature on social marketing, with a specific focus on diet, physical activity, and obesity prevention; and (2) apply the gained knowledge toward a practical solution – a social marketing plan for the CATCH program.^ Methods. The literature review aimed to answer the following questions: (1) What audiences (ethnic and age groups), settings, health behaviors, and behavioral science theories have been used in social marketing campaigns? (2) What features of social marketing were used (e.g. formative research, segmentation, and the marketing mix - including promotional strategies and communication channels)? (3) What were the outcomes of the social marketing campaigns? The search aimed to identify studies that met the following inclusion criteria: (a) The study explicitly stated that social marketing was used; (b) The intervention promoted physical activity and/or healthy eating; (c) The population was children, adolescents, young adults, and/or parents; (d) Results of the intervention were available in the published literature The literature review includes studies from the past five years (2004 to 2009). After reviewing the social marketing literature, the insight and knowledge gained was applied to develop a social marketing plan for the CATCH program. The plan was guided by Hands-on Social Marketing, A Step-by-Step Guide and the Center for Disease Control and Prevention's Social Marketing web course.^

Determining the feasibility and acceptability of a garden-based nutrition curriculum for preschoolers

Obesity rates around the nation have risen to epidemic proportions. Rates of childhood obesity are at very high levels with 24.4% of preschool-aged children in the U.S. currently considered as overweight or obese. The percentage of childhood obesity is much higher in the southern part of the United States as compared to the rest of the nation. Minority populations, especially African American and Hispanic, are affected more than other ethnic groups. Obesity prevention programs are needed targeting young children <6 years of age from minority populations. Currently, there are few obesity prevention programs that have been implemented and evaluated in children <6 years of age. Gardening programs have been successful in improving the health status of elementary school children by increasing fruit and vegetable intake and increasing preferences for healthier food choices. However, there is no evidence of the feasibility and acceptability of a garden-based obesity prevention program among preschoolers. This pretest study, a classroom-based gardening curriculum program with 16 lesson plans and coordinating activities for preschool age children (3-5 years old) enrolled in Head Start, provides the opportunity to address this need. The study included 103 preschoolers from two centers and 9 teachers or teachers' aides. Qualitative data on feasibility and acceptability was collected from process evaluation forms of individual lesson plans and focus groups with teachers. Teacher questionnaires assessed individual teacher characteristics and provided feedback regarding the curriculum. Quantitative measures of teachers' self-efficacy, attitudes, and knowledge pertaining to nutrition were analyzed from pre and post-test surveys. Results revealed this preschool garden-based nutrition curriculum was both feasible and acceptable. The program improved teacher's self-efficacy, knowledge, and attitudes about nutrition, with teacher's confidence in ability to teach a gardening curriculum increasing from a mean score of 2.14 to 3.00 from pre to post test (P value = 0.0046). These results indicate implementing garden-based nutrition lessons within preschools is achievable. Employing garden-based nutrition lessons in the classroom is the first step in teaching children about nutrition and gardening concepts. Constructing gardening beds for more hands-on learning is the next proposed step in the larger parent study of this program.^

Workers and respirators: What factors influence medical clearance? Experience in the petrochemical industry 2004--2008

This retrospective cohort study analyzed data from more than 2200 OSHA-mandated respirator medical evaluations performed between 2004 and 2008, with information initially obtained using an online questionnaire, to determine what factors influence medical clearance and the ability to safely wear respiratory protection in a large petrochemical company.^ The employees were mostly white males with a high school education, ranging in age from 25 to 60 years of age, who had been employed with the company an average of eight years. Their work was typically performed outdoors in a rural or offshore setting. Respirators were typically required for emergency response – escape or rescue only – and/or limited to less than four hours per month.^ Approximately 90% of the population achieved medical clearance by utilizing the online questionnaire. Of the remaining 10%, 66% were cleared after additional "hands-on" medical examination exam; 28% of the individuals' jobs were modified by their supervisor in order to not use a respirator, and 6% of the individuals (n=13) were excluded from wearing a respirator on the basis of the medical examination. The primary causes for exclusion from respirator use were cardiovascular (37.5%) and respiratory (31.3%) issues, followed by psychological (18.8%) and musculoskeletal (12.5%) concerns. Ultimately, over 99% of workers evaluated under this system were found capable of using respiratory protection safely. This questionnaire has proven to be an excellent health screening tool capable of initiating early detection and further investigation of potentially serious medical conditions within a large and diverse population in multiple locations. ^

Dissolution rate spectra data of calcite single crystal and micrite material

The large discrepancy between field and laboratory measurements of mineral reaction rates is a long-standing problem in earth sciences, often attributed to factors extrinsic to the mineral itself. Nevertheless, differences in reaction rate are also observed within laboratory measurements, raising the possibility of intrinsic variations as well. Critical insight is available from analysis of the relationship between the reaction rate and its distribution over the mineral surface. This analysis recognizes the fundamental variance of the rate. The resulting anisotropic rate distributions are completely obscured by the common practice of surface area normalization. In a simple experiment using a single crystal and its polycrystalline counterpart, we demonstrate the sensitivity of dissolution rate to grain size, results that undermine the use of "classical" rate constants. Comparison of selected published crystal surface step retreat velocities (Jordan and Rammensee, 1998) as well as large single crystal dissolution data (Busenberg and Plummer, 1986) provide further evidence of this fundamental variability. Our key finding highlights the unsubstantiated use of a single-valued "mean" rate or rate constant as a function of environmental conditions. Reactivity predictions and long-term reservoir stability calculations based on laboratory measurements are thus not directly applicable to natural settings without a probabilistic approach. Such a probabilistic approach must incorporate both the variation of surface energy as a general range (intrinsic variation) as well as constraints to this variation owing to the heterogeneity of complex material (e.g., density of domain borders). We suggest the introduction of surface energy spectra (or the resulting rate spectra) containing information about the probability of existing rate ranges and the critical modes of surface energy.

Mg/Ca ratios in planktonic foraminifera

The primary Mg/Ca ratio of foraminiferal shells is a potentially valuable paleoproxy for sea surface temperature (SST) reconstructions. However, the reliable extraction of this ratio from sedimentary calcite assumes that we can overcome artifacts related to foraminiferal ecology and partial dissolution, as well as contamination by secondary calcite and clay. The standard batch method for Mg/Ca analysis involves cracking, sonicating, and rinsing the tests to remove clay, followed by chemical cleaning, and finally acid-digestion and single-point measurement. This laborious procedure often results in substantial loss of sample (typically 30-60%). We find that even the earliest steps of this procedure can fractionate Mg from Ca, thus biasing the result toward a more variable and often anomalously low Mg/Ca ratio. Moreover, the more rigorous the cleaning, the more calcite is lost, and the more likely it becomes that any residual clay that has not been removed by physical cleaning will increase the ratio. These potentially significant sources of error can be overcome with a flow-through (FT) sequential leaching method that makes time- and labor-intensive pretreatments unnecessary. When combined with time-resolved analysis (FT-TRA) flow-through, performed with a gradually increasing and highly regulated acid strength, produces continuous records of Mg, Sr, Al, and Ca concentrations in the leachate sorted by dissolution susceptibility of the reacting material. Flow-through separates secondary calcite from less susceptible biogenic calcite and clay, and further resolves the biogenic component into primary and more resistant fractions. FT-TRA reliably separates secondary calcite (which is not representative of original life habitats) from the more resistant biogenic calcite (the desired signal) and clay (a contaminant of high Mg/Ca, which also contains Al), and further resolves the biogenic component into primary and more resistant fractions that may reflect habitat or other changes during ontogeny. We find that the most susceptible fraction of biogenic calcite in surface dwelling foraminifera gives the most accurate value for SST and therefore best represents primary calcite. Sequential dissolution curves can be used to correct the primary Mg/Ca ratio for clay, if necessary. However, the temporal separation of calcite from clay in FT-TRA is so complete that this correction is typically <=2%, even in clay-rich sediments. Unlike hands-on batch methods, that are difficult to reproduce exactly, flow-through lends itself to automation, providing precise replication of treatment for every sample. Our automated flow-through system can process 22 samples, two system blanks, and 48 mixed standards in <12 hours of unattended operation. FT-TRA thus represents a faster, cheaper, and better way to determine Mg/Ca ratios in foraminiferal calcite.

Evaluación de la profundidad de la fisuración superficial descendente en pavimentos asfálticos mediante técnicas de ultrasonidos. Validación teórico-práctica y modelos

La fisuración iniciada en la superficie de los pavimentos asfálticos constituye uno de los más frecuentes e importantes modos de deterioro que tienen lugar en los firmes bituminosos, como han demostrado los estudios teóricos y experimentales llevados a cabo en la última década. Sin embargo, este mecanismo de fallo no ha sido considerado por los métodos tradicionales de diseño de estos firmes. El concepto de firmes de larga duración se fundamenta en un adecuado seguimiento del proceso de avance en profundidad de estos deterioros y la intervención en el momento más apropiado para conseguir mantenerlos confinados como fisuras de profundidad parcial en la capa superficial más fácilmente accesible y reparable, de manera que pueda prolongarse la durabilidad y funcionalidad del firme y reducir los costes generalizados de su ciclo de vida. Por lo tanto, para la selección de la estrategia óptima de conservación de los firmes resulta esencial disponer de metodologías que posibiliten la identificación precisa in situ de la fisuración descendente, su seguimiento y control, y que además permitan una determinación fiable y con alto rendimiento de su profundidad y extensión. En esta Tesis Doctoral se presentan los resultados obtenidos mediante la investigación sistemática de laboratorio e in situ llevada a cabo para la obtención de datos sobre fisuración descendente en firmes asfálticos y para el estudio de procedimientos de evaluación de la profundidad de este tipo de fisuras empleando técnicas de ultrasonidos. Dichos resultados han permitido comprobar que la metodología no destructiva propuesta, de rápida ejecución, bajo coste y sencilla implementación (principalmente empleada hasta el momento en estructuras metálicas y de hormigón, debido a las dificultades que introduce la naturaleza viscoelástica de los materiales bituminosos) puede ser aplicada con suficiente fiabilidad y repetibilidad sobre firmes asfálticos. Las medidas resultan asimismo independientes del espesor total del firme. Además, permite resolver algunos de los inconvenientes frecuentes que presentan otros métodos de diagnóstico de las fisuras de pavimentos, tales como la extracción de testigos (sistema destructivo, de alto coste y prolongados tiempos de interrupción del tráfico) o algunas otras técnicas no destructivas como las basadas en medidas de deflexiones o el georradar, las cuales no resultan suficientemente precisas para la investigación de fisuras superficiales. Para ello se han realizado varias campañas de ensayos sobre probetas de laboratorio en las que se han estudiado diferentes condiciones empíricas como, por ejemplo, distintos tipos de mezclas bituminosas en caliente (AC, SMA y PA), espesores de firme y adherencias entre capas, temperaturas, texturas superficiales, materiales de relleno y agua en el interior de las grietas, posición de los sensores y un amplio rango de posibles profundidades de fisura. Los métodos empleados se basan en la realización de varias medidas de velocidad o de tiempo de transmisión del pulso ultrasónico sobre una única cara o superficie accesible del material, de manera que resulte posible obtener un coeficiente de transmisión de la señal (mediciones relativas o autocompensadas). Las mediciones se han realizado a bajas frecuencias de excitación mediante dos equipos de ultrasonidos diferentes dotados, en un caso, de transductores de contacto puntual seco (DPC) y siendo en el otro instrumento de contacto plano a través de un material especialmente seleccionado para el acoplamiento (CPC). Ello ha permitido superar algunos de los tradicionales inconvenientes que presenta el uso de los transductores convencionales y no precisar preparación previa de las superficies. La técnica de autocalibración empleada elimina los errores sistemáticos y la necesidad de una calibración local previa, demostrando el potencial de esta tecnología. Los resultados experimentales han sido comparados con modelos teóricos simplificados que simulan la propagación de las ondas ultrasónicas en estos materiales bituminosos fisurados, los cuales han sido deducidos previamente mediante un planteamiento analítico y han permitido la correcta interpretación de dichos datos empíricos. Posteriormente, estos modelos se han calibrado mediante los resultados de laboratorio, proporcionándose sus expresiones matemáticas generalizadas y gráficas para su uso rutinario en las aplicaciones prácticas. Mediante los ensayos con ultrasonidos efectuados en campañas llevadas a cabo in situ, acompañados de la extracción de testigos del firme, se han podido evaluar los modelos propuestos. El máximo error relativo promedio en la estimación de la profundidad de las fisuras al aplicar dichos modelos no ha superado el 13%, con un nivel de confianza del 95%, en el conjunto de todos los ensayos realizados. La comprobación in situ de los modelos ha permitido establecer los criterios y las necesarias recomendaciones para su utilización sobre firmes en servicio. La experiencia obtenida posibilita la integración de esta metodología entre las técnicas de auscultación para la gestión de su conservación. Abstract Surface-initiated cracking of asphalt pavements constitutes one of the most frequent and important types of distress that occur in flexible bituminous pavements, as clearly has been demonstrated in the technical and experimental studies done over the past decade. However, this failure mechanism has not been taken into consideration for traditional methods of flexible pavement design. The concept of long-lasting pavements is based on adequate monitoring of the depth and extent of these deteriorations and on intervention at the most appropriate moment so as to contain them in the surface layer in the form of easily-accessible and repairable partial-depth topdown cracks, thereby prolonging the durability and serviceability of the pavement and reducing the overall cost of its life cycle. Therefore, to select the optimal maintenance strategy for perpetual pavements, it becomes essential to have access to methodologies that enable precise on-site identification, monitoring and control of top-down propagated cracks and that also permit a reliable, high-performance determination of the extent and depth of cracking. This PhD Thesis presents the results of systematic laboratory and in situ research carried out to obtain information about top-down cracking in asphalt pavements and to study methods of depth evaluation of this type of cracking using ultrasonic techniques. These results have demonstrated that the proposed non-destructive methodology –cost-effective, fast and easy-to-implement– (mainly used to date for concrete and metal structures, due to the difficulties caused by the viscoelastic nature of bituminous materials) can be applied with sufficient reliability and repeatability to asphalt pavements. Measurements are also independent of the asphalt thickness. Furthermore, it resolves some of the common inconveniences presented by other methods used to evaluate pavement cracking, such as core extraction (a destructive and expensive procedure that requires prolonged traffic interruptions) and other non-destructive techniques, such as those based on deflection measurements or ground-penetrating radar, which are not sufficiently precise to measure surface cracks. To obtain these results, extensive tests were performed on laboratory specimens. Different empirical conditions were studied, such as various types of hot bituminous mixtures (AC, SMA and PA), differing thicknesses of asphalt and adhesions between layers, varied temperatures, surface textures, filling materials and water within the crack, different sensor positions, as well as an ample range of possible crack depths. The methods employed in the study are based on a series of measurements of ultrasonic pulse velocities or transmission times over a single accessible side or surface of the material that make it possible to obtain a signal transmission coefficient (relative or auto-calibrated readings). Measurements were taken at low frequencies by two short-pulse ultrasonic devices: one equipped with dry point contact transducers (DPC) and the other with flat contact transducers that require a specially-selected coupling material (CPC). In this way, some of the traditional inconveniences presented by the use of conventional transducers were overcome and a prior preparation of the surfaces was not required. The auto-compensating technique eliminated systematic errors and the need for previous local calibration, demonstrating the potential for this technology. The experimental results have been compared with simplified theoretical models that simulate ultrasonic wave propagation in cracked bituminous materials, which had been previously deduced using an analytical approach and have permitted the correct interpretation of the aforementioned empirical results. These models were subsequently calibrated using the laboratory results, providing generalized mathematical expressions and graphics for routine use in practical applications. Through a series of on-site ultrasound test campaigns, accompanied by asphalt core extraction, it was possible to evaluate the proposed models, with differences between predicted crack depths and those measured in situ lower than 13% (with a confidence level of 95%). Thereby, the criteria and the necessary recommendations for their implementation on in-service asphalt pavements have been established. The experience obtained through this study makes it possible to integrate this methodology into the evaluation techniques for pavement management systems.

Strength and stiffness of repaired tendons

Rotator cuff tears of the shoulder are a common cause of pain and disability. Although surgery is frequently beneficial, re-tearing of the tendons is likely to re-occur. In many cases even if the reparation is successful it will still generate discomfort, problems with mobility, as well as a sharp pain. This project is funded in the cooperation with the Hospital Clinico San Carlos de Madrid. The purpose of this work is to analyze the effect of the surgical repair and the application of different therapies, including mesenchymal stem cell therapy on the biomechanical properties (strength and stiffness) of the repaired tendon. An animal model of rotator cuff tendon reparations has been developed on laboratory rats.To obtain the mechanical response of the healthy and repaired tendons, it was necessary to develop an experimental set up to reproduce the in-vivo working conditions of the tendons (37 ºC, immersed in physiological serum), and especially the load transfer. The biomechanical properties (maximum load and stiffness) have been measured in healthy and repaired tendons. A total of 70 rats are used in this particular study. It has been found that the repaired tendon is stronger than the original on. However, the repaired tendons demonstrate less flexibility than the healthy (original) ones prior to the damage

An overview of the ciao system

Ciao is a logic-based, multi-paradigm programming system. One of its most distinguishing features is that it supports a large number of semantic and syntactic language features which can be selectively activated or deactivated for each program module. As a result, a module can be written in, for example, ISO-Prolog plus constraints and higher order, while another can be a puré logic module with a different control rule such as iterative deepening and/or tabling, and perhaps using constructive negation. A powerful and modular extensión mechanism allows user-level design and implementation of such features and sub-languages. Another distinguishing feature of Ciao is its powerful assertion language, which allows expressing many kinds of program properties (ranging from, e.g., moded types to resource consumption), as well as tests and documentation. The compiler is capable of statically ñnding violations of these properties or verifying that programs comply with them, and issuing certiñcates of this compliance. The compiler also performs many types of optimizations, including automatic parallelization. It offers very competitive performance, while retaining the flexibility and interactive development of a dynamic language. We will present a hands-on overview of the system, through small examples which emphasize the novel aspects and the motivations which lie behind Ciao's design and implementation.

Program analysis, debugging and optimization using the ciao system preprocessor

We present a tutorial overview of Ciaopp, the Ciao system preprocessor. Ciao is a public-domain, next-generation logic programming system, which subsumes ISO-Prolog and is specifically designed to a) be highly extensible via librarles and b) support modular program analysis, debugging, and optimization. The latter tasks are performed in an integrated fashion by Ciaopp. Ciaopp uses modular, incremental abstract interpretation to infer properties of program predicates and literals, including types, variable instantiation properties (including modes), non-failure, determinacy, bounds on computational cost, bounds on sizes of terms in the program, etc. Using such analysis information, Ciaopp can find errors at compile-time in programs and/or perform partial verification. Ciaopp checks how programs cali system librarles and also any assertions present in the program or in other modules used by the program. These assertions are also used to genérate documentation automatically. Ciaopp also uses analysis information to perform program transformations and optimizations such as múltiple abstract specialization, parallelization (including granularity control), and optimization of run-time tests for properties which cannot be checked completely at compile-time. We illustrate "hands-on" the use of Ciaopp in all these tasks. By design, Ciaopp is a generic tool, which can be easily tailored to perform these and other tasks for different LP and CLP dialects.

Cálculo de espaldones en diques rompeolas : estudio comparativo de las formulaciones actuales y propuesta de una nueva metodología

La presencia de un monolito en la coronación de un dique rompeolas tiene como principales ventajas la reducción del volumen de elementos necesarios en el manto y la mejora de la operatividad de los muelles que abriga, lo que supone un importante ahorro de coste tanto de ejecución como de explotación y mantenimiento. Por ello, la utilización del espaldón en los diques rompeolas se encuentra generalizada desde hace décadas en numerosos puertos de todo el mundo. Para el diseño de este elemento se han ido desarrollando diversas metodologías, siendo la primera de ellas (Iribarren y Nogales) propuesta en la década de los cincuenta, y la última (Berenguer y Baonza) en el año 2006. Estos procedimientos se basan en series de ensayos en modelo físico y tienen como filosofía la determinación de las cargas que genera el oleaje al impactar contra el paramento vertical para poder dimensionar un monolito estable frente a tales acciones. Sin embargo, las averías que se han producido en este elemento particular, incluso en la pasada década, ponen de relieve la gran sensibilidad de este elemento frente a estas y otras acciones de diseño. El objetivo de la presente Tesis Doctoral es el desarrollo de un método de diseño alternativo a los existentes, basado en la observación de diques reales que se encuentran en funcionamiento en la actualidad y mediante el cual se obtenga directamente como resultado las dimensiones principales del monolito en lugar de las cargas debidas al impacto de la ola incidente. Para ello, se ha realizado el análisis comparativo de los métodos de diseño de espaldones disponibles hasta la fecha. Antes de establecer una nueva metodología primeramente se ha estudiado el Estado del Arte, del cual se ha realizado un análisis crítico, donde se indican las posibles incertidumbres y limitaciones que presenta cada metodología. Para lograr el objetivo de la presente Tesis Doctoral se desarrolla una investigación basada en los datos de veintitrés diques ubicados en la fachada mediterránea española, considerando variables tanto climáticas como geométricas del propio dique. Se ha seguido el principio del Teorema Π para formar monomios adimensionales y, a través de combinaciones entre ellos, establecer relaciones de dependencia. Con los resultados obtenidos se ha elaborado una metodología de diseño que se propone como respuesta al objetivo planteado. Wall erected on top of a breakwater has two main advantages: lower amount of armour elements and better operating capacity of the inner harbor, which means an appreciable construction, operating and maintenance saving. Therefore, many breakwaters have been designed with crown wall all over the world. Different design methods have been developed through the years. The first one (Iribarren & Nogales) was set in the fifties, and the latest (Berenguer & Baonza) was developed in 2006. All of them are based on laboratory tests series and their common philosophy is to calculate the wave forces on the wall in order to design an element stable against these forces. However, crown wall failures have occured even in last decade, which point the high sensitivity of this element. The objective of this Thesis is to develop an alternative design procedure based on real breakwaters data, which gave as a direct result the most important measures of the crown wall instead of wave loads. In order to achieve the objective, firstly a critical analysis of the State of the Art has been carried out, determining ranges of application and detecting uncertainties. A research on twenty-three breakwaters of the Mediterranean Spanish coast has been carried out to fulfill the objective of this Thesis, taking into account both climatic and geometric parameters. It has been followed Theorem Π to make non-dimensional monomials and, through combinations among them, identify dependency rates. Obtained results lead to a design method.

Resources to introduce Inquire Based Scientic Education in Secondary and High School

The global Hands-on Universe association is producing and distributing free resources world- wide to implement Inquire Based Scienti?c Education (IBSE) at secondary and high school levels. The materials are inspired in astronomical research and space exploration. The association is implementing the Galileo Teacher Training Program world-wide. In this contribution, a summary on the most recent resources being implemented by HOU-Espa~na and developed with Spanish participation is presented.