Química Sem Fronteiras: o desafio da energia

Coal, natural gas and petroleum-based liquid fuels are still the most widely used energy sources in modern society. The current scenario contrasts with the foreseen shortage of petroleum that was spread out in the beginning of the XXI century, when the concept of "energy security" emerged as an urgent agenda to ensure a good balance between energy supply and demand. Much beyond protecting refineries and oil ducts from terrorist attacks, these issues soon developed to a portfolio of measures related to process sustainability, involving at least three fundamental dimensions: (a) the need for technological breakthroughs to improve energy production worldwide; (b) the improvement of energy efficiency in all sectors of modern society; and (c) the increase of the social perception that education is a key-word towards a better use of our energy resources. Together with these technological, economic or social issues, "energy security" is also strongly influenced by environmental issues involving greenhouse gas emissions, loss of biodiversity in environmentally sensitive areas, pollution and poor solid waste management. For these and other reasons, the implementation of more sustainable practices in our currently available industrial facilities and the search for alternative energy sources that could partly replace the fossil fuels became a major priority throughout the world. Regarding fossil fuels, the main technological bottlenecks are related to the exploitation of less accessible petroleum resources such as those in the pre-salt layer, ranging from the proper characterization of these deep-water oil reservoirs, the development of lighter and more efficient equipment for both exploration and exploitation, the optimization of the drilling techniques, the achievement of further improvements in production yields and the establishment of specialized training programs for the technical staff. The production of natural gas from shale is also emerging in several countries but its production in large scale has several problems ranging from the unavoidable environmental impact of shale mining as well as to the bad consequences of its large scale exploitation in the past. The large scale use of coal has similar environmental problems, which are aggravated by difficulties in its proper characterization. Also, the mitigation of harmful gases and particulate matter that are released as a result of combustion is still depending on the development of new gas cleaning technologies including more efficient catalysts to improve its emission profile. On the other hand, biofuels are still struggling to fulfill their role in reducing our high dependence on fossil fuels. Fatty acid alkyl esters (biodiesel) from vegetable oils and ethanol from cane sucrose and corn starch are mature technologies whose market share is partially limited by the availability of their raw materials. For this reason, there has been a great effort to develop "second-generation" technologies to produce methanol, ethanol, butanol, biodiesel, biogas (methane), bio-oils, syngas and synthetic fuels from lower grade renewable feedstocks such as lignocellulosic materials whose consumption would not interfere with the rather sensitive issues of food security. Advanced fermentation processes are envisaged as "third generation" technologies and these are primarily linked to the use of algae feedstocks as well as other organisms that could produce biofuels or simply provide microbial biomass for the processes listed above. Due to the complexity and cost of their production chain, "third generation" technologies usually aim at high value added biofuels such as biojet fuel, biohydrogen and hydrocarbons with a fuel performance similar to diesel or gasoline, situations in which the use of genetically modified organisms is usually required. In general, the main challenges in this field could be summarized as follows: (a) the need for prospecting alternative sources of biomass that are not linked to the food chain; (b) the intensive use of green chemistry principles in our current industrial activities; (c) the development of mature technologies for the production of second and third generation biofuels; (d) the development of safe bioprocesses that are based on environmentally benign microorganisms; (e) the scale-up of potential technologies to a suitable demonstration scale; and (f) the full understanding of the technological and environmental implications of the food vs. fuel debate. On the basis of these, the main objective of this article is to stimulate the discussion and help the decision making regarding "energy security" issues and their challenges for modern society, in such a way to encourage the participation of the Brazilian Chemistry community in the design of a road map for a safer, sustainable and prosper future for our nation.

EMISSÕES DE ÓXIDO NITROSO E METANO DO SOLO EM ÁREAS DE RECUPERAÇÃO DE PASTAGENS NA AMAZÔNIA MATOGROSSENSE

AbstractThis study evaluates the chemical processes responsible for the nitrous oxide (N2O) and methane (CH4) fluxes in the managed pasture (PM) and unmanaged pasture (PNM). In addition, the impact of nitrogen fertilization on the N2O and CH4 fluxes was assessed. The experiments were conducted on three farms in Alta Floresta city in the state of Mato Grosso. Both regular and intensive samples were collected from PM, PNM, and forest areas for each of the properties. The gases were sampled using static chambers in the morning. Higher N2O fluxes were recorded in the PMs, whereas the CH4 fluxes showed no influence of nitrogen fertilization in both regular and intensive samples. Low fertilizer levels resulted in low N2O emissions.

Keskitetyn lämmöntuotannon kehittämismahdollisuudet Lahden seudulla ilmastonmuutoksen näkökulmasta

Tämä diplomityö on tehty Aalto yliopiston Teknillisen korkeakoulun Lahden keskuksen IMMU-hankkeeseen. Teoriaosassa tarkastellaan kaukolämmityksen nykytilannetta ja sen tulevai-suuteen vaikuttavia tekijöitä. Työssä on tarkasteltu Lahti Energia Oy:n Kymijärven voimalaitosalueen kehittämismahdollisuuksia vuosina 2012 ja 2016. Vertailukohtana käytetään nykytilannetta vuoden 2009 tiedoilla. Työssä on selvitetty voimalaitosalueen elinkaaren aikaisia kasvihuonekaasupäästöjä ja niiden muutoksia mahdollisten uusien voimalaitosinvestointien myötä. Vuonna 2012 alueelle rakennetaan kiinteää polttoainetta käyttävä kaasutusvoimalaitos jolloin nykyisen laitoksen käyttö ja samalla kivihiilen käyttö vähenee huomattavasti. Tässä työssä vuoden 2016 skenaariossa alueelle ajatellaan rakennettavan kolmas voimalaitos, maakaasukäyttöinen kaasukombiturbiini. Tarkasteluissa energiantuotantomäärien oletetaan pysyvän nykytilanteen suuruisina. Työssä tarkasteltujen skenaarioiden perusteella alueen yhdistetyn kaukolämmön- ja sähköntuotannon (CHP) päästöjä voitaisiin vähentää vuonna 2012 noin 20 % ja vuonna 2016 noin 30 % nykytilanteesta. Esitettyjen investointien riskinä on sopivan polttoaineen saatavuus ja riittävyys. Lisäksi työssä tarkasteltiin kaasutusvoimalaitoksen ja kaasukombiturbiinin takaisinmaksuaikoja. Kierrätyspolttoaineen hinnan kallistuminen hinnasta 5 €/MWh hintaan 15 €/MWh vaikutti kaasutusvoimalaitoksen takaisinmaksuaikaan yhdeksällä vuodella. Kaasukombiturbiinin takaisinmaksuaika piteni tämän hetkiseen maakaasun hintaan 27 €/MWh verrattuna päästöoikeuden lisäkustannus 6 €/MWh huomioiden kahdeksan vuotta. Takaisinmaksuaikaan vaikuttaa muun muassa polttoaineen hinta ja laitoksen huipunkäyttöaika.

Biopolttoaineiden lisäämismahdollisuudet kaukolämmön tuotannossa pienen kokoluokan tuotantolaitoksissa Lahden seudulla

Tämä diplomityö on tehty IMMU-hankkeeseen, jossa selvitetään konkreettisia keinoja ilmastonmuutoksen hillintään Lahden seudulla. Diplomityössä tarkastellaan mahdollisuuksia lisätä biopolttoaineita pienen kokoluokan kaukolämmön tuotantolaitoksissa. Teoria osuuden pohjalta luodaan skenaariot Nastolaan ja Vääksyyn (Asikkala). Skenaarioissa tarkastellaan biopolttoaineiden lisäämisen vaikutuksia kasvihuonekaasu- ja hiukkaspäästöihin käyttämällä elinkaariarviointimenetelmää. Taloudellisia seikkoja tarkastellaan laskemalla takaisinmaksuaikoja eri biolaitosratkaisuille nettonykyarvomenetelmällä. Tutkimuksen tuloksena saatiin, että kasvihuonekaasupäästöt tuotannon elinkaaren ajalta vähenevät eniten tuottamalla kaukolämmön perustuotanto Nastolassa ja Vääksyssä bio-CHP-laitoksella haketta polttamalla. Kiinteitä biopolttoaineita poltettaessa tulevat kuitenkin suurimmat hiukkaspäästöt, mikä vaikuttaa asuinympäristön viihtyvyyteen tuotantolaitoksen läheisyydessä. Bio-CHP-laitoksen investointikustannukset ovat suurimmat ja takaisinmaksuaika pisin. Nastolan kulutusperusteisiä päästöjä pystytään vähentämään eniten investoimalla biolämpölaitokseen tai bio-CHP-laitokseen. Päästöjä Nastolassa pystyttäisiin kyseisillä investoinneilla vähentämään enimmillään 6,4 %. Lahti energian kokonaispäästöjä pystyttäisiin enimmillään vähentämään noin 1,6 %. Johtopäätöksenä tutkimuksesta voidaan sanoa, että kasvihuonekaasupäästöjä pystytään vähentämään investointien avulla. Toiset ratkaisut ovat vain kalliimpia kuin toiset. Lisäksi kiinteitä biopolttoaineita käytettäessä jotkut poltto-ominaisuudet voivat heiketä esim. verrattuna maakaasun polttoon. Biopolttoaineiden lisäämisellä kuitenkin päästään irti riippuvuudesta fossiilisiin polttoaineisiin kuten öljyyn ja maakaasuun. Investointeja tehdessä on vaikea sanoa suoraan, mikä vaihtoehto on paras tapa tuottaa kaukolämpöä. Investointipäätöksiä tehdessä päätökseen vaikuttaa se, mitä tuotannon ominaispiirteitä painotetaan eniten.

Computer tools applied to analysis of solar water heaters

The simulation programs are important tools to analyze the different energetic alternatives, including the use of renewable energy. The objective of this study was to analyze comparatively the different computer tools available for modeling of solar water heaters. Among the main simulation software of solar thermal systems, there are: RETScreen International, EnergyPlus, TRNSYS, SolDesigner, SolarPro, e T*SOL. Among the tools mentioned, only EnergyPlus and RETScreen International are free, but they allow obtaining interesting results when applied together. The first one has a detailed module of energy analysis of solar water heaters, while the second one provides an detailed economic feasibility study and an assessment of emissions of greenhouse gases. RETScreen International and EnergyPlus programs are aimed at a diverse audience, including designers, researchers and energy planners.

Climate driven changes in temperature, pH and food quality : effects on copepod reproduction

Increased emissions of greenhouse gases into the atmosphere are causing an anthropogenic climate change. The resulting global warming challenges the ability of organisms to adapt to the new temperature conditions. However, warming is not the only major threat. In marine environments, dissolution of carbon dioxide from the atmosphere causes a decrease in surface water pH, the so called ocean acidification. The temperature and acidification effects can interact, and create even larger problems for the marine flora and fauna than either of the effects would cause alone. I have used Baltic calanoid copepods (crustacean zooplankton) as my research object and studied their growth and stress responses using climate predictions projected for the next century. I have studied both direct temperature and pH effects on copepods, and indirect effects via their food: the changing phytoplankton spring bloom composition and toxic cyanobacterium. The main aims of my thesis were: 1) to find out how warming and acidification combined with a toxic cyanobacterium affect copepod reproductive success (egg production, egg viability, egg hatching success, offspring development) and oxidative balance (antioxidant capacity, oxidative damage), and 2) to reveal the possible food quality effects of spring phytoplankton bloom composition dominated by diatoms or dinoflagellates on reproducing copepods (egg production, egg hatching, RNA:DNA ratio). The two copepod genera used, Acartia sp. and Eurytemora affinis are the dominating mesozooplankton taxa (0.2 – 2 mm) in my study area the Gulf of Finland. The 20°C temperature seems to be within the tolerance limits of Acartia spp., because copepods can adapt to the temperature phenotypically by adjusting their body size. Copepods are also able to tolerate a pH decrease of 0.4 from present values, but the combination of warm water and decreased pH causes problems for them. In my studies, the copepod oxidative balance was negatively influenced by the interaction of these two environmental factors, and egg and nauplii production were lower at 20°C and lower pH, than at 20°C and ambient pH. However, presence of toxic cyanobacterium Nodularia spumigena improved the copepod oxidative balance and helped to resist the environmental stress, in question. In addition, adaptive maternal effects seem to be an important adaptation mechanism in a changing environment, but it depends on the condition of the female copepod and her diet how much she can invest in her offspring. I did not find systematic food quality difference between diatoms and dinoflagellates. There are both good and bad diatom and dinoflagellate species. Instead, the dominating species in the phytoplankton bloom composition has a central role in determining the food quality, although copepods aim at obtaining as a balanced diet as possible by foraging on several species. If the dominating species is of poor quality it can cause stress when ingested, or lead to non-optimal foraging if rejected. My thesis demonstrates that climate change induced water temperature and pH changes can cause problems to Baltic Sea copepod communities. However, their resilience depends substantially on their diet, and therefore the response of phytoplankton to the environmental changes. As copepods are an important link in pelagic food webs, their future success can have far reaching consequences, for example on fish stocks.

Tuulivoima; kehitys, investoinnit ja työllisyys Suomessa

Tuulivoimalla on pitkä historia. Tuulivoima soveltuu nykyajan energiantuotantoon. Suunniteltaessa ja rakennettaessa uusia tuulivoimaloita on tunnettava tuulisuuteen vaikuttavat tekijät samoin kuin tuulivoimalan sijoituspaikalla on tehtävä perusteelliset tuu-liolosuhdemittaukset. Nykyisellä sähkön hinnalla tuulivoimalat eivät ole täysin kilpailukykyisiä, joten niitä on tuettava. Tukimuotoja on monia. Suomessa pääasiallinen tukimuoto on syöttötariffi. Vallitseva politiikka on ratkaisevassa asemassa luotaessa tukijärjestelmiä tuulivoimalle. Suomessa tehtävät tuulivoimainvestoinnit ovat kasvussa. Tuulivoimaan liittyy niin hyviä kuin huonoja puolia. Huonot puolet ovat ratkaistavissa. Päästökaupan kannalta on tuulivoima yksi keino alentaa kasvihuonekaasuja ilmakehässä. Tuulivoiman osuuden kasvattaminen sähköntuotannossa luo työpaikkoja Suomeen ja luo vientimahdollisuuksia ulkomaille. Tuulivoimalla on valoisa tulevaisuus.

Pressure filtration characteristics of enzymatically hydrolyzed biomass suspensions

Enzymatic hydrolysis of lignocellulosic polymers is likely to become one of the key technologies enabling industrial production of liquid biofuels and chemicals from lignocellulosic biomass. Certain types of enzymes are able to hydrolyze cellulose and hemicellulose polymers to shorter units and finally to sugar monomers. These monomeric sugars are environmentally acceptable carbon sources for the production of liquid biofuels, such as bioethanol, and other chemicals, such as organic acids. Liquid biofuels in particular have been shown to contribute to the reduction of net emissions of greenhouse gases. The solid residue of enzymatic hydrolysis is composed mainly of lignin and partially degraded fibers, while the liquid phase contains the produced sugars. It is usually necessary to separate these two phases at some point after the hydrolysis stage. Pressure filtration is an efficient technique for this separation. Solid-liquid separation of biomass suspensions is difficult, because biomass solids are able to retain high amounts of water, which cannot be readily liberated by mechanical separation techniques. Most importantly, the filter cakes formed from biomaterials are compressible, which ultimately means that the separation may not be much improved by increasing the filtration pressure. The use of filter aids can therefore facilitate the filtration significantly. On the other hand, the upstream process conditions have a major influence on the filtration process. This thesis investigates how enzymatic hydrolysis and related process conditions affect the filtration properties of a cardboard suspension. The experimental work consists of pressure filtration and characterization of hydrolysates. The study provides novel information about both issues, as the relationship between enzymatic hydrolysis conditions and subsequent filtration properties has so far not been considered in academic studies. The results of the work reveal that the final degree of hydrolysis is an important factor in the filtration stage. High hydrolysis yield generally increases the average specific cake resistance. Mixing during the hydrolysis stage resulted in undefined changes in the physical properties of the solid residue, causing a high filtration resistance when the mixing intensity was high. Theoretical processing of the mixing data led to an interesting observation: the average specific cake resistance was observed to be linearly proportional to the mixer shear stress. Another finding worth attention is that the size distributions of the solids did not change very dramatically during enzymatic hydrolysis. There was an observable size reduction during the first couple of hours, but after that the size reduction was minimal. Similarly, the size distribution of the suspended solids remained almost constant when the hydrolyzed suspension was subjected to intensive mixing. It was also found that the average specific cake resistance was successfully reduced by the use of filter aids. This reduction depended on the method of how the filter aids were applied. In order to obtain high filtration capacity, it is recommended to use the body feed mode, i.e. to mix the filter aid with the slurry prior to filtration. Regarding the quality of the filtrate, precoat filtration was observed to produce a clear filtrate with negligible suspended solids content, while the body feed filtrates were turbid, irrespective of which type of filter aid was used.

Suomen kasvihuonekaasupäästöt Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa – kokonaistilanne ja vähentämistoimenpiteet

Tämä diplomityö on läpileikkaus kasvihuonekaasupäästöistä sekä niitä koskevista vähennystoimenpiteistä Suomessa Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa. Työ on toteutettu kirjallisuustutkimuksena ja siihen on käytetty painettuja sekä sähköisiä lähteitä. Huoli ilmastonmuutoksesta on saanut aikaan sen, että kasvihuonekaasupäästöjä rajoitetaan tänä päivänä kansainvälisillä sopimuksilla. Vaikka kaikki suuretkaan päästäjämaat eivät ole sopimuksia ratifioineet, ovat EU-maat Suomi mukaan lukien sitoutuneet YK:n ilmastonmuutosta koskevaan puitesopimukseen ja sen noudattamiseen. Puitesopimusta tarkentavassa Kioton pöytäkirjassa EU sitoutui vähentämään kuuden eri kasvihuonekaasun kokonaispäästöjä yhteensä 8 prosenttia ajanjaksolla 2008–2012 vuoteen 1990 verrattuna. Kasvihuonekaasut, joita rajoitukset koskivat, olivat hiilidioksidi, metaani, dityppioksidi, fluorihiilivedyt, perfluorihiilivedyt ja rikkiheksafluoridi. EU:n sisäisessä taakanjaossa Suomen tavoite oli pitää päästöt vertailuvuoden 1990 tasossa ja Suomi alitti tämän noin viidellä prosentilla. Vuoden 2012 jälkeen Suomen kasvihuonekaasupäästöjen vähennystavoite on kiristynyt. Vuosille 2013–2020 Suomen tavoite on vähentää kasvihuonekaasupäästöjä 20 prosenttia alle perusvuoden 1990 tason. Työssä tutustutaan myös keinoihin, joilla aiempien ja tulevien päästöjenvähennystavoitteiden saavuttaminen on mahdollista. Näitä keinoja on mm. erilaisten biopolttoaineiden sekoittaminen fossiilisten polttoaineiden sekaan, energiatehokkuuden parantaminen ja biokaasun käytön lisääminen. Lisäksi työssä käsitellään eräitä merkityksellisiä käsitteitä, kuten EU:n päästökauppajärjestelmä ja hiilidioksidin talteenotto ja varastointi.

Potential for Greenhouse Gas Emission Reductions by Using Biomethane as a Road Transportation Fuel

The aim of this thesis is to study whether the use of biomethane as a transportation fuel is reasonable from climate change perspective. In order to identify potentials and challenges for the reduction of greenhouse gas (GHG) emissions, this dissertation focuses on GHG emission comparisons, on feasibility studies and on the effects of various calculation methodologies. The GHG emissions calculations are carried out by using life cycle assessment (LCA) methodologies. The aim of these LCA studies is to figure out the key parameters affecting the GHG emission saving potential of biomethane production and use and to give recommendations related to methodological choices. The feasibility studies are also carried out from the life cycle perspective by dividing the biomethane production chain for various operators along the life cycle of biomethane in order to recognize economic bottlenecks. Biomethane use in the transportation sector leads to GHG emission reductions compared to fossil transportation fuels in most cases. In addition, electricity and heat production from landfill gas, biogas or biomethane leads to GHG reductions as well. Electricity production for electric vehicles is also a potential route to direct biogas or biomethane energy to transportation sector. However, various factors along the life cycle of biomethane affect the GHG reduction potentials. Furthermore, the methodological selections have significant effects on the results. From economic perspective, there are factors related to different operators along the life cycle of biomethane, which are not encouraging biomethane use in the transportation sector. To minimize the greenhouse gas emissions from the life cycle of biomethane, waste feedstock should be preferred. In addition, energy consumption, methane leakages, digestate utilization and the current use of feedstock or biogas are also key factors. To increase the use of biomethane in the transportation sector, political steering is needed to improve the feasibility for the operators. From methodological perspective, it is important to recognize the aim of the life cycle assessment study. The life cycle assessment studies can be divided into two categories: 1.) To produce average GHG information of biomethane to evaluate the acceptability of biomethane use compared to fossil transportation fuels. 2.) To produce GHG information of biomethane related to actual decision-making situations. This helps to figure out the actual GHG emission changes in cases when feedstock, biogas or biomethane are already in other use. For example directing biogas from electricity production to transportation use does not necessarily lead to additional GHG emission reductions. The use of biomethane seems to have a lot of potential for the reduction of greenhouse gas emissions as a transportation fuel. However, there are various aspects related to production processes, to the current use of feedstock or biogas and to the feasibility that have to be taken into account.

The Possibility of Greenhouse Gas Mitigation in Ethiopian Cement Industry

Cement industry significantly associated with high greenhouse gas (GHG) emissions. Considering the environmental impact, particularly global warming potential, it is important to reduce these emissions to air. The aim of the study is to investigate the mitigation possibility of GHG emissions in Ethiopian cement industry. Life cycle assessment (LCA) method used to identify and quantify GHG emissions during one ton of ordinary portland cement (OPC) production. Three mitigation scenarios: alternative fuel use, clinker substitution and thermal energy efficiency were applied on a representative gate-to-gate flow model developed with GaBi 6 software. The results of the study indicate that clinker substitution and alternative fuel use play a great role for GHG emissions mitigation with affordable cost. Applying most energy efficient kiln technology, which in turn reduces the amount of thermal energy use, has the least GHG emissions reduction intensity and high implementation cost comparing to the other scenarios. It was found that the cumulative GHG emissions mitigation potential along with other selected mitigation scenarios can be at least 48.9% per ton of cement production.

Global coordination: weighted voting

In order to halt the depletion of global ecological capital, a number of different kinds of meetings between Governments of countries in the world has been scheduled. The need for global coordination of environmental policies has become ever more obvious, supported by more and more evidence of the running down of ecological capital. But there are no formal or binding arrangements in sight, as global environmental coordination suffers from high transaction costs (qualitative voting). The CO2 equivalent emissions, resulting in global warming, are driven by the unstoppable economic expansion in the global market economy, employing mainly fossil fuel generated energy, although at the same time lifting sharply the GDP per capita of several emerging countries. Only global environmental coordination on the successful model of the World Band and the IMF (quantitative voting) can stem the rising emissions numbers and stop further environmental degradation. However, the system of weighted voting in the WB and the IMF must be reformed by reducing the excessive voting power disparities, for instance by reducing all member country votes by the cube root expression.

Les produits dérivés des marchés européens du carbone

L'analyse statistique des données a été effectuée avec le logiciel R.

Opportunités du REDD+ pour l'aménagement durable des forêts tropicales et obstacles à son implantation en République démocratique du Congo : perspective juridique

La situation de la forêt tropicale dans les pays en développement en général, et en République Démocratique du Congo (RDC) en particulier, est inquiétante. Les émissions de dioxyde de carbone dues au déboisement sont de l’ordre de 1,6 GtCO2e/an, soit 17% des émissions mondiales de « gaz à effet de serre ». Sous l’égide de la Convention-cadre des Nations Unies sur les changements climatiques, le REDD+ a été institué pour lutter contre cette déforestation et la dégradation des forêts. Cette étude examine les différentes opportunités qu’offre ce programme pour l’aménagement écosystémique du couvert forestier de la RDC et les obstacles contextuels à sa mise en oeuvre. Pour la RDC, le REDD+ présente un certain nombre d’opportunités : réduction des émissions liées au déboisement et à la dégradation des forêts; amorce des travaux d’afforestation et de reforestation par une gestion durable des ressources conduisant à la création des emplois et favorisant la croissance des PIB et des exports; accroissement du rendement et maintien d’une plus grande couverture des besoins alimentaires. Le REDD+ peut favoriser la croissance du Produit intérieur brut agricole. Il peut contribuer à l’électrification des ménages et réduire de moitié les dépenses des ménages dépendant de l’exploitation minière et des hydrocarbures et, ainsi, générer des milliers d’emplois en infrastructures. Pour les populations locales et autochtones, il peut contribuer aussi à protéger et à valoriser les cultures liées à la forêt. Mais, face aux pesanteurs d’ordre juridique, politique, social, économique, technologique et culturel caractéristiques de ce pays, ces opportunités risquent d’être amenuisées, sinon annihilées. Étant donné que l’essentiel du déploiement du dispositif du REDD+ se réalisera dans les zones rurales congolaises, l’obstacle majeur reste le droit coutumier. La solution serait d’harmoniser les exigences et finalités du REDD+ non seulement avec le Code forestier de 2002 et ses mesures d’exécution mais aussi avec le droit coutumier auquel les communautés locales et autochtones s’identifient.

A Study of Single Stage Semi‐Dry Anaerobic Digestion of Organic Fraction of Municipal Solid Waste

Solid waste generation is a natural consequence of human activity and is increasing along with population growth, urbanization and industrialization. Improper disposal of the huge amount of solid waste seriously affects the environment and contributes to climate change by the release of greenhouse gases. Practicing anaerobic digestion (AD) for the organic fraction of municipal solid waste (OFMSW) can reduce emissions to environment and thereby alleviate the environmental problems together with production of biogas, an energy source, and digestate, a soil amendment. The amenability of substrate for biogasification varies from substrate to substrate and different environmental and operating conditions such as pH, temperature, type and quality of substrate, mixing, retention time etc. Therefore, the purpose of this research work is to develop feasible semi-dry anaerobic digestion process for the treatment of OFMSW from Kerala, India for potential energy recovery and sustainable waste management. This study was carried out in three phases in order to reach the research purpose. In the first phase, batch study of anaerobic digestion of OFMSW was carried out for 100 days at 32°C (mesophilic digestion) for varying substrate concentrations. The aim of this study was to obtain the optimal conditions for biogas production using response surface methodology (RSM). The parameters studied were initial pH, substrate concentration and total organic carbon (TOC). The experimental results showed that the linear model terms of initial pH and substrate concentration and the quadratic model terms of the substrate concentration and TOC had significant individual effect (p < 0.05) on biogas yield. However, there was no interactive effect between these variables (p > 0.05). The optimum conditions for maximizing the biogas yield were a substrate concentration of 99 g/l, an initial pH of 6.5 and TOC of 20.32 g/l. AD of OFMSW with optimized substrate concentration of 99 g/l [Total Solid (TS)-10.5%] is a semi-dry digestion system .Under the optimized condition, the maximum biogas yield was 53.4 L/kg VS (volatile solid).. In the second phase, semi-dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for substrate concentration of 100 g/l (TS-11.2%) for investigating the start-up performances under thermophilic condition (50°C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS for the substrate concentration of 100 g/l. About 66.7% of volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day-1. A laboratory bench scale reactor with a capacity of 36.8 litres was designed and fabricated to carry out the continuous anaerobic digestion of OFMSW in the third phase. The purpose of this study was to evaluate the performance of the digester at total solid concentration of 12% (semi-dry) under mesophlic condition (32°C). The digester was operated with different organic loading rates (OLRs) and constant retention time. The performance of the reactor was evaluated using parameters such as pH, volatile fatty acid (VFA), alkalinity, chemical oxygen demand (COD), TOC and ammonia-N as well as biogas yield. During the reactor’s start-up period, the process is stable and there is no inhibition occurred and the average biogas production was 14.7 L/day. The reactor was fed in continuous mode with different OLRs (3.1,4.2 and 5.65 kg VS/m3/d) at constant retention time of 30 days. The highest volatile solid degradation of 65.9%, with specific biogas production of 368 L/kg VS fed was achieved with OLR of 3.1 kg VS/m3/d. Modelling and simulation of anaerobic digestion of OFMSW in continuous operation is done using adapted Anaerobic Digestion Model No 1 (ADM1).The proposed model, which has 34 dynamic state variables, considers both biochemical and physicochemical processes and contains several inhibition factors including three gas components. The number of processes considered is 28. The model is implemented in Matlab® version 7.11.0.584(R2010b). The model based on adapted ADM1 was tested to simulate the behaviour of a bioreactor for the mesophilic anaerobic digestion of OFMSW at OLR of 3.1 kg VS/m3/d. ADM1 showed acceptable simulating results.