977 resultados para Gauls in Italy.
Resumo:
Sebbene Anarsia lineatella sia un fitofago ormai da anni introdotto e diffuso in Italia, ancora poco si conosce circa le sue abitudini riproduttive. In considerazione della elevata dannosità di A. lineatella nei pescheti del nord Italia e delle scarse conoscenze sulla sua biologia, si è evidenziata la necessità di approfondire la conoscenza di questo fitofago. Pertanto gli scopi di questa ricerca hanno riguardato l’approfondimento delle conoscenze sui sistemi di comunicazione intraspecifici utilizzati da A. lineatella; la valutazione dell’efficacia di diverse miscele di feromone sintetico, in laboratorio utilizzando anche densità diverse di popolazioni di anarsia e in campo utilizzando gabbie di accoppiamento appositamente costruite, posizionate in frutteti a conduzione biologica nel nord Italia e messe a confronto con gabbie che utilizzavano come fonte attrattiva femmine vergini di tre giorni di età. Sono state condotte prove sul comportamento di maschi di A. lineatella di differenti età in risposta al feromone emesso da femmine vergini di tre giorni di età e al feromone emesso da erogatori di materiale plastico contenenti differenti miscele di feromone sintetico. Sono stati condotti studi per verificare l’influenza del contenuto di alcol ((E)5-10:OH) nella miscela feromonica sulla capacità di inibizione degli accoppiamenti, sottoponendo gli insetti a differenti concentrazioni di feromone in modo da verificare eventuali differenze di attività delle diverse miscele, differenze che emergerebbero con evidenza maggiore alle minori concentrazioni. Alcune prove sono state effettuate anche con differenti densità di popolazione, poiché una maggiore densità di popolazione determina una maggiore probabilità di accoppiamento, evidenziando più chiaramente i limiti di efficacia della miscela utilizzata. Inoltre sono state effettuate prove di campo per confrontare due modelli di erogatore per la confusione sessuale di anarsia contenenti miscele con differenti percentuali di alcol Inoltre, poiché nei pescheti la presenza di A. lineatella è pressoché sempre associata a quella di Cydia molesta e l’applicazione del metodo della confusione deve spesso essere applicato per controllare entrambi gli insetti, può risultare vantaggioso disporre di un unico erogatore contenente entrambi i feromoni; è stato quindi valutato un erogatore contenente una miscela dei due feromoni per verificare eventuali interazioni che possano ridurre l’efficacia.
Resumo:
The emergency of infection by highly pathogenic avian influenza virus (HPAI) subtype H5N1 has focused the attention of the world scientific community, requiring the prompt provision of effective control systems for early detection of the circulation of low pathogenic influenza H5 viruses (LPAI) in populations of wild birds to prevent outbreaks of highly pathogenic (HPAI) in populations of domestic birds with possible transmission to humans. The project stems from the aim to provide, through a preliminary analysis of data obtained from surveillance in Italy and Europe, a preliminary study about the virus detection rates and the development of mathematical models, an objective assessment of the effectiveness of avian influenza surveillance systems in wild bird populations, and to point out guidelines to support the planning process of the sampling activities. The results obtained from the statistical processing quantify the sampling effort in terms of time and sample size required, and simulating different epidemiological scenarios identify active surveillance as the most suitable for endemic LPAI infection monitoring in wild waterfowl, and passive surveillance as the only really effective tool in early detecting HPAI H5N1 circulation in wild populations. Given the lack of relevant information on H5N1 epidemiology, and the actual finantial and logistic constraints, an approach that makes use of statistical tools to evaluate and predict monitoring activities effectiveness proves to be of primary importance to direct decision-making and make the best use of available resources.
Resumo:
Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.
Resumo:
Pharmaceuticals are useful tools to prevent and treat human and animal diseases. Following administration, a significant fraction of pharmaceuticals is excreted unaltered into faeces and urine and may enter the aquatic ecosystem and agricultural soil through irrigation with recycled water, constituting a significant source of emerging contaminants into the environment. Understanding major factors influencing their environmental fate is consequently needed to value the risk, reduce contamination, and set up bioremediation technologies. The antiviral drug Tamiflu (oseltamivir carboxylate, OC) has received recent attention due to the potential use as a first line defence against H5N1 and H1N1 influenza viruses. Research has shown that OC is not removed during conventional wastewater treatments, thus having the potential to enter surface water bodies. A series of laboratory experiments investigated the fate and the removal of OC in surface water systems in Italy and Japan and in a municipal wastewater treatment plant. A preliminary laboratory study investigated the persistence of the active antiviral drug in water samples from an irrigation canal in northern Italy (Canale Emiliano Romagnolo). After an initial rapid decrease, OC concentration slowly decreased during the remaining incubation period. Approximately 65% of the initial OC amount remained in water at the end of the 36-day incubation period. A negligible amount of OC was lost both from sterilized water and from sterilized water/sediment samples, suggesting a significant role of microbial degradation. Stimulating microbial processes by the addition of sediments resulted in reduced OC persistence. Presence of OC (1.5 μg mL-1) did not significantly affect the metabolic potential of the water microbial population, that was estimated by glyphosate and metolachlor mineralization. In contrast, OC caused an initial transient decrease in the size of the indigenous microbial population of water samples. A second laboratory study focused on basic processes governing the environmental fate of OC in surface water from two contrasting aquatic ecosystems of northern Italy, the River Po and the Venice Lagoon. Results of this study confirmed the potential of OC to persist in surface water. However, the addition of 5% of sediments resulted in rapid OC degradation. The estimated half-life of OC in water/sediment of the River Po was 15 days. After three weeks of incubation at 20 °C, more than 8% of 14C-OC evolved as 14CO2 from water/sediment samples of the River Po and Venice Lagoon. OC was moderately retained onto coarse sediments from the two sites. In water/sediment samples of the River Po and Venice Lagoon treated with 14C-OC, more than 30% of the 14C-residues remained water-extractable after three weeks of incubation. The low affinity of OC to sediments suggests that the presence of sediments would not reduce its bioavailability to microbial degradation. Another series of laboratory experiments investigated the fate and the removal of OC in two surface water ecosystems of Japan and in the municipal wastewater treatment plant of the city of Bologna, in Northern Italy. The persistence of OC in surface water ranged from non-detectable degradation to a half-life of 53 days. After 40 days, less than 3% of radiolabeled OC evolved as 14CO2. The presence of sediments (5%) led to a significant increase of OC degradation and of mineralization rates. A more intense mineralization was observed in samples of the wastewater treatment plant when applying a long incubation period (40 days). More precisely, 76% and 37% of the initial radioactivity applied as 14C-OC was recovered as 14CO2 from samples of the biological tank and effluent water, respectively. Two bacterial strains growing on OC as sole carbon source were isolated and used for its removal from synthetic medium and environmental samples, including surface water and wastewater. Inoculation of water and wastewater samples with the two OC-degrading strains showed that mineralization of OC was significantly higher in both inoculated water and wastewater, than in uninoculated controls. Denaturing gradient gel electrophoresis and quantitative PCR analysis showed that OC would not affect the microbial population of surface water and wastewater. The capacity of the ligninolytic fungus Phanerochaete chrysosporium to degrade a wide variety of environmentally persistent xenobiotics has been largely reported in literature. In a series of laboratory experiments, the efficiency of a formulation using P. chrysosporium was evaluated for the removal of selected pharmaceuticals from wastewater samples. Addition of the fungus to samples of the wastewater treatment plant of Bologna significantly increased (P < 0.05) the removal of OC and three antibiotics, erythromycin, sulfamethoxazole, and ciprofloxacin. Similar effects were also observed in effluent water. OC was the most persistent of the four pharmaceuticals. After 30 days of incubation, approximately two times more OC was removed in bioremediated samples than in controls. The highest removal efficiency of the formulation was observed with the antibiotic ciprofloxacin. The studies included environmental aspects of soil contamination with two emerging veterinary contaminants, such as doramectin and oxibendazole, wich are common parasitic treatments in cattle farms.
Resumo:
Questa ricerca mostra l’evoluzione della letteratura mitologica per ragazzi in Italia. Il primo libro italiano di mitologia per bambini è stato pubblicato nel 1911 (lo stesso anno di un’importante e violenta guerra coloniale tra l’Italia e la Libia): la scrittrice italiana Laura Orvieto pubblicò allora “Storie della storia del mondo”, in cui riunì antichi racconti greci per giovani lettori. Queste storie erano ispirate al libro mitologico per bambini “Il libro delle meraviglie” di Hawthorne (titolo originale “A Wonder Book for Girls and Boys”). In seguito molti scrittori italiani scrissero libri mitologici per giovani lettori: serie importanti di libri di mitologia per bambini furono pubblicate durante il regime mussoliniano – talvolta per diffondere l’ideologia fascista della superiorità romana. Durante questo periodo, i libri mitologici spesso mostravano uno stile letterario solenne. Dopo la seconda guerra mondiale, la letteratura mitologica per bambini cambiò lentamente prospettiva: gli scrittori italiani cominciarono ad usare il mito per parlare di problemi sociali (p.e. Gianni Rodari descriveva re Mida come un capitalista) e per spiegare le diverse condizioni umane (p.e. Beatrice Masini fa riferimento alle dee e alle eroine greche per descrivere la condizione femminile). La ricerca analizza anche la relazione tra mito e scuola in Italia: i racconti mitologici hanno sempre fatto parte dei programmi scolastici italiani per bambini dagli 8 agli 11 anni. Le riforme scolastiche – deliberate negli anni ’20 e ’40 – fissarono pratiche didattiche sui miti ancora oggi in uso. I racconti mitologici erano soprattutto un supporto per gli studi storici e letterari. Tuttavia, negli ultimi decenni, i miti sono divenuti un importante aiuto per gli insegnamenti scientifici e artistici.
Resumo:
Crop elicitation: innovative approach for the valorization of grain legume functional properties. In Italy grain legume cultivation has encountered a drastic decrease due to several causes (productive, economic, social). In this regard, studies aimed at the setting up of agronomic techniques able to guarantee high and constant in planta yields of health-promoting compounds may concur at re-launching legume production. In this context, 22 accessions of grain legumes (17 Phaseolus vulgaris, 3 Phaseolus coccineus, 1 Vigna unguiculata and 1 Glycine max genotypes) were screened with the aim of identifying genotypes rich in health beneficial phytochemicals (α-amylase inhibitors, α -glucosidase inhibitors, polyphenols) and with low anti-nutritional compounds (lectins). A wide variability was observed among investigated accessions. Four genotypes (Verdone, Kidney Cina, Roviotto and DG) showed a α -amylase inhibitory activity significantly higher (approximately 30% more) than all other tested accessions. The α -amylase inhibitory activity was not correlated neither with the protein nor with the polyphenol contents. Conversely, the α -glucosidase inhibitory activity was positively correlated with grain color and polyphenol content: dark-colored seeds had a mean inhibitory activity of 83.64 ± 22.07%, whereas light-colored seeds had mean values of 21.11 ± 9.36%. As regards the anti-nutritional compounds, out of all common bean accessions, only DG showed no erythro-agglutination activity (lectins). Preliminary experiments, performed in controlled environment, permitted to highlight that different germination conditions markedly affect the synthesis and accumulation of functional compounds in legume seedlings. Those findings were confirmed with field trials performed in two different locations (Bologna and Pisa), on two bean genotypes (Verdone and Zolfino), during the 2004-2005 cropping season. Results showed that the application of abiotic stresses (no fertilization and /or no irrigation) lead to a significant increase of flavonoids in grains, but a decrease (up to 50%) in legume yields was also observed. Crop elicitation, even if valuable for boosting health-promoting compound synthesis in crops, must necessary cope with economically acceptable crop yields.
Resumo:
Life expectancy at birth is the average number of years that a group of people born in the same year should live. The estimate for those born in 2010 is 80.2 years for Italy. On the other side of the chart are a number of countries in sub Saharan Africa. Haiti is in last place: children born in this country in 2010 have a life expectancy by an average of even 30 years, fifty in less than peers born in Italy. From a bioethical point of view, the first question that arises is: Is it right? Is it right that there is such inequality in health? The answer is simple: it is not right. But if we ask ourselves what are the best solution to remedy this situation, the answers become more than one. The differences in life expectancy depends on many factors, including no doubt the effectiveness of health systems. The scope of this work is precisely that of justice in health care and how the different general concepts related to it can be applied in health care settings with very limited financial and human resources. The first chapter describes the main inequalities in global health. The second discusses the main theories of justice. In the next chapter we reason on official development assistance and health cooperation. In the fourth we analyze the contribution of theories of justice through such issues as equity in health, the right of access to health services and right to health. In the fifth chapter the aim is to reason about global justice, the role of health in this context and how the official development assistance in health can contribute.
Resumo:
The question “artificial nutrition and hydration (ANH) is therapy or not?” is one of the key point of end-of-life issues in Italy, since it was (and it is also nowadays) a strategic and crucial point of the Italian Bioethics discussion about the last phases of human life: determining if ANH is therapy implies the possibility of being included in the list of treatments that could be mentioned for refusal within the living will document. But who is entitled to decide and judge if ANH is a therapy or not? Scientists? The Legislator? Judges? Patients? This issue at first sight seems just a matter of science, but at stake there is more than a scientific definition. According to several scholars, we are in the era of post-academic Science, in which Science broaden discussion, production, negotation and decision to other social groups that are not just the scientific communities. In this process, called co-production, on one hand scientific knowledge derives from the interaction between scientists and society at large. On the other hand, science is functional to co-production of social order. The continuous negotation on which science has to be used in social decisions is just the evidence of the mirroring negotation for different way to structure and interpret society. Thus, in the interaction between Science and Law, deciding what kind of Science could be suitable for a specific kind of Law, envisages a well defined idea of society behind this choice. I have analysed both the legislative path (still in progress) in the living will act production in Italy and Eluana Englaro’s judicial case (that somehow collapsed in the living will act negotiation), using official documents (hearings, texts of the official conference, committees comments and ruling texts) and interviewing key actors in the two processes from the science communication point of view (who talks in the name of science? Who defines what is a therapy? And how do they do?), finding support on the theoretical framework of the Science&Technologies Studies (S&TS).
Resumo:
Main objective of the dissertation is to illustrate how social and educational aspects (in close interaction with other multifunctional aspects in organic agriculture) which are developed on different multifunctional organic farms in Italy and Netherlands, as well as established agricultural policy frameworks in these countries, can be compared with the situation in Croatian organics and can contribute to further developent of organic issues in the Repubic of Croatia. So, through different chapters, the dissertation describes the performance of organic agriculture sectors in Italy, Netherlands and Croatia within the national agricultural policy frameworks, it analyzes the role of national institutions and policy in Croatia in connection with Croatia's status of candidate country for enterance into EU and harmonization of legislation with the CAP, as well as analyzes what is the role of national authorities, universities, research centres, but also of private initiatives, NGOs and cooperatives in organic agriculture in Netherlands, Italy and Croatia. Its main part describes how social and educational aspects are interacting with other multifunctional aspects in organic agriculture and analyzes the benefits and contribution of multifunctional activites performed on organic farms to education, healthy nourishment, environment protection and health care. It also assess the strengths and weaknesses of organic agriculture in all researched countries. The dissertation concludes with development opportunities for multifunctional organic agriculture in Croatia, as well as giving perspectives and recommendations for different approaches on the basis of experiences learned from successful EU models accompanied with some personal ideas and proposals.
Resumo:
Local worlds, global economies. For an ethnography of microcredit in Italy. The research main purpose is to provide an anthropological analysis of a microcredit project targeting migrant women in Venice, Italy. Microcredit is a globally widespread financial strategy. Muhammad Yunus’ Grameen Bank success in Bangladesh was pivotal in promoting microfinance as one of the most important poverty alleviation strategies in the Development Countries. Post Industrial Countries adopted microcredit to foster “non bankable” categories – notably immigrants, women and young people - financial inclusion. The history of the Venice project is reconstructed starting from the perspectives of its main characters (promoters, social workers, beneficiaries and local stakeholders). Their positioned representations are analyzed in order to understand how different actors reproduced or renegotiated some of the main rhetorics underpinning the hegemonic “microcredit discourse”. Specifically, keywords such as “sustainability”, “empowerment” and “trust” are critically deconstructed to see how they are meant and translated into practice by different actors. Fieldwork data allows some considerations on the Italian way to microfinance.
Resumo:
Background & Aims: This study investigates whether the aetiologic changes in liver disease and the improved management of hepatocellular carcinoma (HCC) have modified the clinical scenario of this tumour over the last 20 years in Italy. Methods: Retrospective study based on the analysis of the ITA.LI.CA (Italian Liver Cancer) database including 3027 HCC patients managed in 11 centres. Patients were divided into 3 groups according to the period of HCC diagnosis: 1987–1996 (year of the ‘‘Milano criteria’’ publication), 1997–2001 (year of release of the EASL guidelines for HCC), and 2002–2008. Results: The significant changes were: (1) progressive patient ageing; (2) increasing prevalence of HCV infection until 2001, with a subsequent decrease, when the alcoholic aetiology increased; (3) liver function improvement, until 2001; (4) increasing ‘‘incidental’’ at the expense of ‘‘symptomatic’’ diagnoses, until 2001; (5) unchanged prevalence of tumours diagnosed during surveillance (around 50%), with an increasing use of the 6- month schedule; (6) favourable HCC ‘‘stage migration’’, until 2001; (7) increasing use of percutaneous ablation; (8) improving survival, until 2001. Conclusions: Over the last 20 years, several aetiologic and clinical features regarding HCC have changed. The survival improvement observed until 2001 was due to an increasing number of tumours diagnosed in early stages and in a background of compensated cirrhosis, and a growing and better use of locoregional treatments. However, the prevalence of early cancers and survival did not increase further in the last years, a result inciting national policies aimed at implementing surveillance programmes for at risk patients.
Resumo:
L’elaborato, dopo una ricostruzione della disciplina normativa presente in materia di contratto a tempo determinato in Italia e nei principali ordinamenti europei (Spagna, Francia ed Inghilterra), affronta i più rilevanti nodi problematici dell’istituto, in riferimento al settore privato e pubblico, mettendo in luce le principali querelle dottrinali e giurisprudenziali. Particolare attenzione è dedicata alle questioni insorte a seguito delle ultime modifiche normative di cui al c.d. Collegato lavoro (legge n. 183/2010), sino al decisivo intervento della Corte Costituzionale, con pronuncia n. 303 del 9 novembre 2011, che ha dichiarato legittima la disposizione introduttiva dell’indennità risarcitoria forfetizzata, aggiuntiva rispetto alla conversione del contratto. Tutte le problematiche trattate hanno evidenziato le difficoltà per le Corti Superiori, così come per i giudici comunitari e nazionali, di trovare una linea univoca e condivisa nella risoluzione delle controversie presenti in materia. L’elaborato si chiude con alcune riflessioni sui temi della flessibilità e precarietà nel mondo del lavoro, attraverso una valutazione quantitativa e qualitativa dell’istituto, nell’intento di fornire una risposta ad alcuni interrogativi: la flessibilità è necessariamente precarietà o può essere letta quale forma speciale di occupazione? Quali sono i possibili antidoti alla precarietà? In conclusione, è emerso come la flessibilità possa rappresentare un problema per le imprese e per i lavoratori soltanto nel lungo periodo. La soluzione è stata individuata nell’opportunità di investire sulla formazione. Si è così ipotizzata una nuova «flessibilità socialmente ed economicamente sostenibile», da realizzarsi tramite l’ausilio delle Regioni e, quindi, dei contributi del Fondo europeo di sviluppo regionale: al lavoratore, in tal modo, potrà essere garantita la continuità con il lavoro tramite percorsi formativi mirati e, d’altro canto, il datore di lavoro non dovrà farsi carico dei costi per la formazione dei dipendenti a tempo determinato.
Resumo:
Heavy pig breeding in Italy is mainly oriented for the production of high quality processed products. Of particular importance is the dry cured ham production, which is strictly regulated and requires specific carcass characteristics correlated with green leg characteristics. Furthermore, as pigs are slaughtered at about 160 kg live weight, the Italian pig breeding sector faces severe problems of production efficiency that are related to all biological aspects linked to growth, feed conversion, fat deposition and so on. It is well known that production and carcass traits are in part genetically determined. Therefore, as a first step to understand genetic basis of traits that could have a direct or indirect impact on dry cured ham production, a candidate gene approach can be used to identify DNA markers associated with parameters of economic importance. In this thesis, we investigated three candidate genes for carcass and production traits (TRIB3, PCSK1, MUC4) in pig breeds used for dry cured ham production, using different experimental approaches in order to find molecular markers associated with these parameters.
Resumo:
La tesi consiste in una comparazione della disciplina costituzionale della libertà di riunione nell'ordinamento italiano ed in quello turco
Resumo:
This thesis presents SEELF (Sustainable EEL fishery) Index, a methodology for evaluation of European eel (Anguilla anguilla) for the implementation of an effective Eel Management Plan, as defined by EU Regulation No.1100/2007. SEELF uses internal and external indices, age and blood parameters, and selects suitable specimen for restocking; it is also a reliable tool for eel stock management. In fact, SEELF Index, was developed in two versions: SEELF A, to be used in field operations (catch&release, eel status monitoring) and SEELF B to be used for quality control (food production) and research (eel status monitoring). Health status was evaluated also by biomarker analysis (ChE), and data were compared with age of eel. Age determination was performed with otolith reading and fish scale reading and a calibration between the two methods was possible. The study area was the Comacchio lagoon, a brackish coastal lagoon in Italy, well known as an example of suitable environment for eel fishery, where the capability to use the local natural resources has long been a key factor for a successful fishery management. Comacchio lagoon is proposed as an area where an effective EMP can be performed, in agreement with the main features (management of basins, reduction of mortality due to predators,etc.) highlighted for designation of European Restocking Area (ERA). The ERA is a new concept, proposed as a pillar of a new strategy on eel management and conservation. Furthermore, the features of ERAs can be useful in the framework of European Scale Eel Management Plan (ESEMP), proposed as a European scale implementation of EMP, providing a more effectiveness of conservation measures for eel management.