Benchmarking de implementaciones WMS-C de software libre

La propuesta WMS Cached (WMS-C) surge ante la necesidad de disponer de una solución más escalable al actual servicio web de mapas (WMS). Mediante la limitación de los parámetros de las peticiones a un conjunto discreto de valores, el servidor de mapas puede servir imágenes pregeneradas (teselas) a gran velocidad. En este documento se recogen las medidas de rendimiento realizadas sobre las implementaciones WMS-C: Tilecache, GeoWebcache y WMSCWrapper, todas ellas basadas en software libre. Los resultados de los benchmarks reflejan que, con todas las peticiones cacheadas y bajo las mismas condiciones, la caché WMSCWrapper ofrece un mejor rendimiento que las otras implementaciones. La difusión de estos resultados será de utilidad para ayudar a diversas entidades en la elección de una de estas soluciones libres en función de su objetivo de optimización

El uso de Sistemas de Infomación Geográfica Libre en Costa Rica

The main topic of this article is the use of the free of charge Geographic Information Systems (GIS), in Costa Rica. It begins establishing the advantages associated with the application of this technologies and which benefits can be obtained. Next, a description of the use of commercial software by part of the national institutions is presented and the variety of fields it is used for. In the manner the application that has been developed is shown. The importance of the GIS’s in the management of the territory is explained and how the institutional information is been treated. It also explains the advantages of using free software in the institutions and it's been implemented by them. At the end of this article a series of conclusions about the status of a free GIS and several activities that had been done are explained

Effect of damper and heat source on wind catcher natural ventilation performance

Experimental wind tunnel and smoke visualisation testing and CFD modelling were conducted to investigate the effect of air flow control mechanism and heat source inside rooms on wind catchers/towers performance. For this purpose, a full-scale wind catcher was connected to a test room and positioned centrally in an open boundary wind tunnel. Pressure coefficients (C-p's) around the wind catcher and air flow into the test room were established. The performance of the wind catcher depends greatly on the wind speed and direction. The incorporation of dampers and egg crate grille at ceiling level reduces and regulates the air flow rate with an average pressure loss coefficient of 0.01. The operation of the wind catcher in the presence of heat sources will potentially lower the internal temperatures in line with the external temperatures.

Uma análise de aspectos relacionados ao desenvolvimento e adoção de Enterprise Resources Planning livre de código aberto

Sistemas Integrados de Gestão ou Enterprise Resources Planning - ERP possibilitam o processamento das informações necessárias em uma empresa usando um único banco de dados. Muito tem se escrito sobre este tipo de software, abordando questões como o alto custo da aquisição de licenças, e a dependência de consultoria para a sua adaptação e implantação nas empresas. Atualmente vem crescendo o desenvolvimento e uso de ERP Livre de Código Aberto (FOS-ERP). Porém verifica-se que este tipo de sistema ainda não é suficientemente explorado, mesmo no meio acadêmico. Este artigo relata alguns trabalhos publicados sobre o assunto e levanta questões que devem ser tratadas por pesquisadores e demais interessados para adequar e viabilizar o uso desses sistemas conforme a realidade nacional. Assim, após uma introdução ao tema, são apresentadas algumas diferenças entre o FOS-ERP e seus equivalentes proprietários (Proprietary ERP ou P-ERP) em termos de modelos de negócios, seleção, customização e evolução. em seguida são elencados alguns desafios e oportunidades que o FOS-ERP pode oferecer a usuários, fornecedores, pesquisadores e colaboradores individuais. Concluindo, este artigo busca ampliar a discussão sobre FOS-ERP, destacando fatores tais como seu potencial de inovação tecnológica e estratégias de negócios.

Aplicação de softwares livres no Processamento de dados sísmicos de alta resolução

The increasing use of shallow seismic methods of high resolution, for investigations of geological problems, environmental or industrial, has impelled the development of techniques, flows and computational algorithms. The practice of applying techniques for processing this data, until recently it wasn t used and the interpretation of the data was made as they were acquired. In order to facilitate and contribute to the improvement of the practices adopted, was developed a free graphical application and open source, called OpenSeismic which is based on free software Seismic Un*x, widely used in the treatment of conventional seismic data used in the exploration of hydrocarbon reservoirs. The data used to validate the initiative were marine seismic data of high resolution, acquired by the laboratory of Geology and Marine Geophysics and Environmental Monitoring - GGEMMA, of the Federal University of Rio Grande do Norte UFRN, for the SISPLAT Project, located at the region of paleo-valley of the Rio Acu. These data were submitted to the processing flow developed by Gomes (2009), using the free software developed in this work, the OpenSeismic, as well other free software, the Seismic Un*x and the commercial software ProMAX, where despite its peculiarities has presented similar results

Metodologias de avaliação de sêmen e procedimentos de fertilização artificial de surubim-do-paraíba, Steindachneridion parahybae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Gerenciamento integrado de rede local com software livre

Pós-graduação em Engenharia Elétrica - FEIS

Delaunay Tetrahedralization of the Heart Based on Integration of Open Source Codes

The Finite Element Method (FEM) is a way of numerical solution applied in different areas, as simulations used in studies to improve cardiac ablation procedures. For this purpose, the meshes should have the same size and histological features of the focused structures. Some methods and tools used to generate tetrahedral meshes are limited mainly by the use conditions. In this paper, the integration of Open Source Softwares is presented as an alternative to solid modeling and automatic mesh generation. To demonstrate its efficiency, the cardiac structures were considered as a first application context: atriums, ventricles, valves, arteries and pericardium. The proposed method is feasible to obtain refined meshes in an acceptable time and with the required quality for simulations using FEM.

Softwares livres e prototipagem rápida aplicados na engenharia

In modern industry we see a growing need for answers cheaper, accurate and quick to deliver solutions and products to be able to remain competitive. In this way the inclusion of open source software and Rapid Prototyping tools have proven very important to obtain the expected results. This work, through information gathering, analysis software and their applicability, search tools commercially available rapid prototyping will demonstrate the importance of these tools and will also present possible configurations for a space for rapid prototyping within the university, as a proposal to implement a rapid prototyping laboratory at the Faculdade de Engenharia de Guaratinguetá

Dynamics of free and H-3-labelled glutamine concentrations during zygotic and somatic embryogenesis of Feijoa [Acca sellowiana (O. Berg.) Burret]

Amino acids play fundamental roles in plant morphogenesis. Among sources of organic nitrogen (N), glutamine has frequently been used during the establishment and maintenance of cell and tissue cultures. The aim of this study was analyse endogenous levels of glutamine during somatic and zygotic embryogenesis of Acca sellowiana (Feijoa or pineapple guava). The in vitro absorption of H-3-labelled glutamine was investigated. Zygotic embryos and embryogenic cultures (EC) were evaluated at 30 d and 70 d after explant inoculation onto the medium. Endogenous levels of glutamine were similar during zygotic and somatic embryogenesis, and showed a gradual decline until day-24 in culture. The highest rates of H-3-labelled glutamine uptake were observed during the first 2 h of incubation, resulting in values of 6.29 mu mol g(-1) fresh weight (FW) for zygotic embryos, 14.43 mu mol g(-1) FW for EC after 30 d, and 13.85 mu mol g(-1) FW for EC after 70 d. These results showed that the decreased levels of glutamine observed during the initial phase of development may be related to de novo protein synthesis and mobilisation during embryo maturation. The absorption of glutamine in the first 2 h of incubation also emphasises its involvement as an important source of N during morphogenesis of somatic and zygotic embryos.

White paper sobre Open Source, Open Access, open Standards e o futuro da catalogação

The discussions on the future of cataloging has received increased attention in the last ten years, mainly due to the impact of rapid development of information and communication technologies in the same period, which has provided access to the Web anytime, anywhere. These discussions revolve around the need for a new bibliographic framework to meet the demand of this new reality in the digital environment, ie how libraries can process, store, deliver, share and integrate their collections (physical, digital or scanned), in current post-PC era? Faced with this question, Open Access, Open Source and Open Standards are three concepts that need to receive greater attention in the field of Library and Information Science, as it is believed to be fundamental elements for the change of paradigm of descriptive representation, currently based conceptually on physical item rather than intellectual work. This paper aims to raise and discuss such issues and instigate information professionals, especially librarians, to think, discuss and propose initiatives for such problems, contributing and sharing ideas and possible solutions, in multidisciplinary teams. At the end is suggested the effective creation of multidisciplinary and inter-institutional study groups on the future of cataloging and its impact on national collections, in order to contribute to the area of descriptive representation in national and international level

Wildfire frecasting using an open source 3D multilayer geographical framework

[EN] This abstract describes the development of a wildfire forecasting plugin using Capaware. Capaware is designed as an easy to use open source framework to develop 3D graphics applications over large geographic areas offering high performance 3D visualization and powerful interaction tools for the Geographic Information Systems (GIS) community.

La città di Bologna e la sua storia: diffusione e condivisione delle conoscenze attraverso Webgis open source e Web Mapping

To understand a city and its urban structure it is necessary to study its history. This is feasible through GIS (Geographical Information Systems) and its by-products on the web. Starting from a cartographic view they allow an initial understanding of, and a comparison between, present and past data together with an easy and intuitive access to database information. The research done led to the creation of a GIS for the city of Bologna. It is based on varied data such as historical map, vector and alphanumeric historical data, etc.. After providing information about GIS we thought of spreading and sharing the collected data on the Web after studying two solutions available on the market: Web Mapping and WebGIS. In this study we discuss the stages, beginning with the development of Historical GIS of Bologna, which led to the making of a WebGIS Open Source (MapServer and Chameleon) and the Web Mapping services (Google Earth, Google Maps and OpenLayers).

Il linguaggio degli ambienti virtuali culturali: comunicare la storia di Bologna attraverso il progetto Nu.M.E.

The contemporary media landscape is characterized by the emergence of hybrid forms of digital communication that contribute to the ongoing redefinition of our societies cultural context. An incontrovertible consequence of this phenomenon is the new public dimension that characterizes the transmission of historical knowledge in the twenty-first century. Awareness of this new epistemic scenario has led us to reflect on the following methodological questions: what strategies should be created to establish a communication system, based on new technology, that is scientifically rigorous, but at the same time engaging for the visitors of museums and Internet users? How does a comparative analysis of ancient documentary sources form a solid base of information for the virtual reconstruction of thirteenth century Bologna in the Metaverse? What benefits can the phenomenon of cross-mediality give to the virtual heritage? The implementation of a new version of the Nu.M.E. project allowed for answering many of these instances. The investigation carried out between 2008 and 2010 has shown that, indeed, real-time 3D graphics and collaborative virtual environments can be feasible tools for representing philologically the urban medieval landscape and for communicating properly validated historical data to the general public. This research is focused on the study and implementation of a pipeline that permits mass communication of historical information about an area of vital importance in late medieval Bologna: Piazza di Porta Ravegnana. The originality of the developed project is not limited solely to the methodological dimension of historical research. Adopted technological perspective is an excellent example of innovation that digital technologies can bring to the cultural heritage. The main result of this research is the creation of Nu.ME 2010, a cross-media system of 3D real-time visualization based on some of the most advanced free software and open source technologies available today free of charge.

ROP Gadgets hiding techniques in Open Source Projects

Today there are many techniques that allows to exploit vulnerabilities of an application; there are also many techniques that are designed to stop these exploit attacks. This thesis wants to highlight how a specific type of attack, based on a technique called Return Oriented Programming (ROP), can be easily applied to binaries with particular characteristics. A new method that allows the injection of "useful" code in an Open Source projects without arousing suspicions is presented; this is possible because of the harmless aspects of the injected code. This useful code facilitate a ROP attack against an executable that contains vulnerable bugs. The injection process can be visualized in environment where an user can contribute with own code to a particular Open Source project. This thesis also highlights how current software protections are not correctly applied to Open Source project, thus enabling the proposed approach.