Differences of absorptive capacity between firms within a cluster

Firms located within a cluster have access to tacit, complex and specific local knowledge which allow them to develop competitive advantage. However, firms have no equal ability to access and to apply that knowledge, meaning that not all have a similar knowledge absorptive capacity. Using a sample of the largest Portuguese firms within a footwear cluster, this paper examine whether there are significant differences in firm’s absorptive capacity and whether such differences within a cluster are related to firms’ specific characteristics. The results suggest that absorptive capacity is significantly associated with the firms’ characteristics, namely size, export intensity and position within the cluster.

Tempo de clampeamento e fatores associados à reserva de ferro de neonatos a termo

OBJETIVO : Analisar o impacto do tempo de clampeamento e parâmetros obstétricos, biológicos e socioeconômicos sobre a reserva de ferro de neonatos nascidos a termo. MÉTODOS : Estudo transversal pelo qual foram avaliados os parâmetros hematológicos de neonatos de Viçosa, MG, de outubro de 2011 a julho de 2012. Foram coletados 7 mL de sangue do cordão umbilical de 144 neonatos a termo e sem baixo peso. Os parâmetros investigados foram: hemograma completo, ferro sérico, ferritina e proteína C-reativa. O tempo de clampeamento do cordão umbilical foi mensurado utilizando cronômetro digital sem interferir nos procedimentos do parto. Os dados de nascimento foram coletados nas Declarações de Nascidos Vivos e as demais informações foram obtidas com a mãe do neonato por aplicação de questionário no primeiro mês pós-parto. Realizou-se análise de regressão linear múltipla visando a estimar a influência de variáveis obstétricas, biológicas e socioeconômicas nos níveis de ferritina ao nascer. RESULTADOS : A mediana de ferritina foi 130,3 µg/L (n = 129, mínimo de 16,4 e máximo 420,5 µg/L), a média de ferro sérico foi 137,9 μg/dL (n = 144, dp = 39,29) e de hemoglobina, 14,7 g/dL (n = 144, dp = 1,47). O tempo mediano de clampeamento do cordão foi 36 segundos, variando entre sete e 100. A análise bivariada detectou associação entre os níveis de ferritina e a cor da criança, tempo de clampeamento de 60 segundos, tipo de parto, a presença de diabetes gestacional e a renda per capita da família. Renda per capita, número de consultas pré-natais e o comprimento ao nascer contribuíram com 22,0% da variação dos níveis de ferritina na análise múltipla. CONCLUSÕES : A reserva de ferro ao nascer sofreu influência de características biológicas, obstétricas e sociais. O combate à anemia deve envolver a implementação de um critério de clampeamento tardio do cordão umbilical para as diretrizes de trabalho de parto, bem como a criação de políticas voltadas para a redução das desigualdades sociais e melhoria da qualidade do atendimento pré-natal.

Concept of Customer Relationship Management as an example of innovation in banking sector

Banks that has introduced CRM system, had to make some difficult changes in their organization in order to become more customer oriented. Beside the pure CRM banks try to adopt other innovative tools related with the core CRM. Some of these solutions are constructed in such a way so that ensured could be also access to the information beside to bank’s organization.

Corrugated horn antenna for a CosmoGal satellite with reduced dimensions

This paper presents the design methodology for the creation of corrugated horn antennas for the CosmoGal satellite. The mission will collect the radiation of the cosmic microwave background, by a radiometer in three different radio astronomy frequency bands (10.6-10.7GHz; 15.35-15.4GHz; 23.6-24GHz). It is discussed the design of several types of horns, simulated with the CST software. The best result points to a choked Gaussian corrugated horn antenna, with directivity of 23 dBi, side lobes 35 dB below and cross polarization better than -45 dB. Plus, with the advantage of having a small dimension, with a total length of only 7.43λ © 2014 IEEE.

Determinants of the exclusive breastfeeding abandonment: psychosocial factors

OBJECTIVE To assess the determinants of exclusive breastfeeding abandonment. METHODS Longitudinal study based on a birth cohort in Viçosa, MG, Southeastern Brazil. In 2011/2012, 168 new mothers accessing the public health network were followed. Three interviews, at 30, 60, and 120 days postpartum, with the new mothers were conducted. Exclusive breastfeeding abandonment was analyzed in the first, second, and fourth months after childbirth. The Edinburgh Postnatal Depression Scale was applied to identify depressive symptoms in the first and second meetings, with a score of ≥ 12 considered as the cutoff point. Socioeconomic, demographic, and obstetric variables were investigated, along with emotional conditions and the new mothers’ social network during pregnancy and the postpartum period. RESULTS The prevalence of exclusive breastfeeding abandonment at 30, 60, and 120 days postpartum was 53.6% (n = 90), 47.6% (n = 80), and 69.6% (n = 117), respectively, and its incidence in the fourth month compared with the first was 48.7%. Depressive symptoms and traumatic delivery were associated with exclusive breastfeeding abandonment in the second month after childbirth. In the fourth month, the following variables were significant: lower maternal education levels, lack of homeownership, returning to work, not receiving guidance on breastfeeding in the postpartum period, mother’s negative reaction to the news of pregnancy, and not receiving assistance from their partners for infant care. CONCLUSIONS Psychosocial and sociodemographic factors were strong predictors of early exclusive breastfeeding abandonment. Therefore, it is necessary to identify and provide early treatment to nursing mothers with depressive symptoms, decreasing the associated morbidity and promoting greater duration of exclusive breastfeeding. Support from health professionals, as well as that received at home and at work, can assist in this process.

Role of abrasive material on micro-abrasion wear tests

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

Increasing the wear resistance of molds for injection of glass fiber reinforced plastics

Abrasion by glass fibers during injection molding of fiber reinforced plastics raises new challenges to the wear performance of the molds. In the last few decades, a large number of PVD and CVD coatings have been developed with the aim of minimizing abrasion problems. In this work, two different coatings were tested in order to increase the wear resistance of the surface of a mold used for glass fiber reinforced plastics: TiAlSiN and CrN/CrCN/DLC. TiAlSiN was deposited as a graded monolayer coating while CrN/CrCN/DLC was a nanostructured coating consisting of three distinct layers. Both coatings were produced by PVD unbalanced magnetron sputtering and were characterized using scanning electron microscopy (SEM) provided with energy dispersive spectroscopy (EDS), atomic force microscopy (AFM), micro hardness (MH) and scratch test analysis. Coating morphology, thickness, roughness, chemical composition and structure, hardness and adhesion to the substrate were investigated. Wear resistance was characterized through industrial tests with coated samples and an uncoated reference sample inserted in a feed channel of a plastic injection mold working with 30 wt.% glass fiber reinforced polypropylene. Results after 45,000 injection cycles indicate that the wear resistance of the mold was increased by a factor of 25 and 58, by the TiAlSiN and CrN/CrCN/DLC coatings, respectively, over the uncoated mold steel.

Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.

Micro-abrasion wear behaviour of TiAlCrSiN nanostructured coatings

The injection process of glass fibres reinforced plastics promotes the moulds surface degradation by erosion. In order to improve its wear resistance, several kinds of PVD thin hard coatings were used. It is well-known that nanostructures present a better compromise between hardness and toughness. Indeed, when the coating is constituted by a large number of ultra-thin different layers, cracks and interface troubles tend to decrease. However, it is not clear that these nanostructures present a better wear behaviour in erosion processes. In order to study its wear behaviour, a sputtered PVD nanostructured TiAlCrSiN coating was used. The substrate and film surfaces topography were analyzed by profilometry and atomic force microscopy techniques. Film adhesion to the substrate was evaluated by scratch tests. The surface hardness was measured with a Vickers micro-hardness tester. The wear resistance was evaluated by micro-abrasion with a rotating ball tribometer tests. Slurry of SiC particles in distilled water was used in order to provoke the surface abrasion. Different duration tests were performed in order to analyze the wear evolution. After these tests, the wear mechanisms developed were analyzed by scanning electron microscopy. Wear craters were measured and the wear rate was calculated and discussed. With the same purpose, coated inserts were mounted in an injection mould working with a 30% glass fibres reinforced polypropylene. After 45 000 cycles no relevant wear was registered.

Aspectos da padronização de testes sorológicos para a doença de Chagas: um teste imunoenzimático para a triagem de doadores de sangue

No diagnóstico sorológico da doença de Chagas podem ser encontradas acentuadas divergências mesmo entre laboratórios de grande experiência. Para a padronização de um teste imunoenzimático destinado primariamente à seleção de doadores de sangue foram cuidadosamente escolhidos painéis de soros que se buscaram como representativos das populações de chagásicos e de não chagásicos. Produzido para máxima sensibilidade e estabilidade, o novo reagente (bioELISA - cruzi*) foi testado em 1648 soros, com diagnóstico clínico de doença de Chagas em 219 e de outras afecções em 104. O teste foi comparado com testes já bem padronizados, de imunofluorescência (IF) e de hemaglutinação (HA), em 1325 soros. O limiar de reatividade (cut off), estabelecido como ideal, foi indicado nos testes pela absorbância de um soro de reatividade mínima. A sensibilidade do teste imunoenzimático foi de 0,9954 e a especificidade, como conegatividade, de 0,9969. Não foram vistos resultados falso-positivos em casos de sífilis, toxoplasmose, mononucleose e de soros com altos títulos de anti-estreptolisina 0, mas foram encontrados em 5 de 15 casos de leishmaniose tegumentar, 10 de 24 casos de calazar, 1 de 15 casos de artrite reumatóide e 1 de 12 casos de lupus eritematoso sistêmico. Os altos índices de sensibilidade em chagásicos e de especificidade na população geral, traduzem a elevada confiabilidade do teste para triagem de doadores de sangue e para a confirmação de suspeita clínica de doença de Chagas.

Immunogenicity of three recombinant hepatitis B vaccines administered to students in three doses containing half the antigen amount routinely used for adult vaccination

We evaluated the immunogenicity of three recombinant hepatitis B vaccines, one Brazilian (Butang, Instituto Butantan) and two Korean vaccines (Euvax-B, LG Chemical Ltd. and Hepavax-Gene, Greencross Vaccine Corp.), administered intramuscularly to students aged 17 to 19 years in three 10-µg doses (corresponding to half the amount of antigen routinely used for adult vaccination) at intervals of one month between the first and second dose, and of four months between the second and third dose. A total of 316 students non-reactive for any serological marker of hepatitis B virus infection were vaccinated: 77 (24.4%) with the Butang vaccine, 71 (22.5%) with Euvax-B, 85 (26.9%) with Hepavax-Gene and, for comparison, 83 (26.2%) with Engerix-B (GlaxoSmithKline), whose efficacy in young adults at the dose used here has been confirmed in previous studies. Similar seroconversion rates (anti-HBs > 10 mIU/mL about one month after application of the third dose) were obtained for the Butang, Euvax-B, Hepavax-Gene and Engerix-B vaccines (96.2%, 98.6%, 96.5% and 97.6%, respectively). The frequency of good responders (anti-HBs > 100 mIU/mL) was also similar among students receiving the four vaccines (85.8%, 91.6%, 89.4% and 89.2%, respectively). The geometric mean titers (GMT) of anti-HBs about one month after the third dose obtained with these vaccines were 727.78 ± 6.46 mIU/mL, 2009.09 ± 7.16 mIU/mL, 1729.82 ± 8.85 mIU/mL and 2070.14 ± 11.69 mIU/mL, respectively. The GMT of anti-HBs induced by the Euvax-B and Engerix-B vaccines were higher than those obtained with the Butang vaccine (p < 0.05); this difference was not significant when comparing the other vaccines two-by-two. No spontaneous adverse effects attributable to the application of any dose of the four vaccines were reported.

Vigilância Prospectiva da Infecção Relacionada com a Prestação de Cuidados de Saúde numa Unidade de Cuidados Intensivos Neonatais – Uma Experiência de Seis Anos

As infecções associadas à prestação de cuidados de saúde são ocorrências temíveis em unidades de cuidados intensivos neonatais (UCIN). A vigilância prospectiva dá aos neonatologistas um conhecimento da sua frequência, dos agentes mais comuns isolados na sua unidade e respectiva sensibilidade, influenciando de modo positivo as tentativas de controlar a sua frequência. Objectivo: Divulgar os resultados da vigilância epidemiológica da infecção de origem hospitalar numa UCIN. População e Métodos: Todos os recém-nascidos (RN) admitidos na unidade são registados, independentemente da idade gestacional, do peso ao nascer e da idade na admissão. Todos os episódios de infecção sistémica ocorridos desde a admissão até à alta são registados: sépsis, septicémia, pneumonia e meningite. É classificada como infecção de origem hospitalar a que surge 72h após a admissão. Resultados: No período de seis anos decorrido entre 2002 e 2007, foram tratados 1648 recém-nascidos a que corresponderam 27 862 dias de tratamento, 4 395 dias de ventilação e 10 537 dias de cateterismo venoso central (CVC); 261 RN eram de muito baixo peso (MBP) e 369 foram submetidos a grande cirurgia. Houve 242 episódios de infecção em 229 doentes. As taxas de infecção foram as seguintes (mediana e limites): RN infectados em % de tratados 13% (10,4%-17,4%); septicémia/100 doentes tratados-6,5 (3,8-11,3); septicémia/1000 dias doente-3,7 (3-6,2); septicémia/1000dias de CVC-4.1 (0,9-5,8); infecção por Staphylococcus coagulase negativa (SCN) em RN MBP - 9,8% (4%-12,5%); pneumonia relacionada com tubo traqueal/1000 dias de tubo traqueal – 3,2 (0-9,1). O agente mais frequentemente isolado foi o SCN. Conclusão: A vigilância epidemiológica é um instrumento muito útil para conhecer as taxas de infecção de uma unidade de saúde e a sua tendência, assim como os microorganismos e respectiva sensibilidade. Esse conhecimento constitui a base a partir da qual se pode tentar reduzir a sua prevalência.

Focus on: II – physiological principles of acid-base balance: an integrative perspective

Normal human metabolism leads to the daily production of large amounts of volatile and non-volatile acids. The maintenance of the pH within physiological limits is a demanding task in which several mechanisms are involved. The most immediate answer comes from several physiological buffers that quickly neutralize pH deviations caused by the addition of strong acids or bases to the body. Bicarbonate/carbonic acid is the most important buffer pair of the extracellular milieu, but is chemically inefficient and depends on the continuous activity of the lung and kidney. Other physiological buffers have higher efficacy and are very important in the intracellular environment and renal tubules. The capacity of the various chemical buffers is kept by operating in an open system and by several controlling mechanisms. The lung is responsible for the elimination of the carbon dioxide (CO2) produced in the body. In metabolic disorders, respiratory adjustment of the elimination of CO2 prolongs the effect of the bicarbonate/carbonic acid buffer, but this process consumes bicarbonate. The kidney contributes to acid-base balance through several mechanisms: 1) controls the reabsorption of filtered bicarbonate; 2) regenerates bicarbonate consumed in buffer reactions; 3) eliminates non-volatile acids. Renal elimination of acid and bicarbonate regeneration is only possible due to the existence of several urinary buffers and to the ability of the kidneys to produce ammonia

Bloqueio Epidural Torácico em Cirurgia de Nuss: Caso de Sucesso

Os autores descrevem o caso c1ínico de um adolescente com o diagnóstico de pectus excavatum grave, submetido a cirurgia de Nuss sob controlo toracoscópico. Realizou-se anestesia combinada, com cateter epidural torácico que permitiu um periodo intra e pós-operatório estável, sem intercorrências e sem necessidade de suplementação analgésica.