Genetic diversity and susceptibility to Vip3Aa20 protein in Brazilian populations of Helicoverpa armigera and Helicoverpa zea (Lepidoptera: Noctuidae)

Helicoverpa armigera (Hübner) was officially reported in Brazil in 2013. This species is closely related to Helicoverpa zea (Boddie) and has caused significant crop damage in Brazil. The use of genetically modified crops expressing insecticidal protein from Bacillus thuringiensis (Berliner) has been one of the control tactics for managing these pests. Genetically modified maize expressing Vip3Aa20 was approved to commercial use in Brazil in 2009. Understanding the genetic diversity and the susceptibility to B. thuringiensis proteins in H. armigera and H. zea populations in Brazil are crucial for establishing Insect Resistance Management (IRM) programs in Brazil. Therefore, the objectives of this study were: (a) to infer demographic parameters and genetic structure of H. armigera and H. zea Brazil; (b) to assess the intra and interspecific gene flow and genetic diversity of H. armigera and H. zea; and (c) to evaluate the susceptibility to Vip3Aa20 protein in H. armigera and H. zea populations of Brazil. A phylogeographic analysis of field H. armigera and H. zea populations was performed using a partial sequence data from the cytochrome c oxidase I (COI) gene. H. armigera individuals were most prevalent on dicotyledonous hosts and H. zea individuals were most prevalent on maize crops. Both species showed signs of demographic expansion and no genetic structure. High genetic diversity and wide distribution were observed for H. armigera. A joint analysis indicated the presence of Chinese, Indian, and European lineages within the Brazilian populations of H. armigera. In the cross-species amplification study, seven microsatellite loci were amplified; and showed a potential hybrid offspring in natural conditions. Interespecific analyses using the same microsatellite loci with Brazilian H. armigera and H. zea in compare to the USA H. zea were also conducted. When analyses were performed within each species, 10 microsatellites were used for H. armigera, and eight for H. zea. We detected high intraspecific gene flow in populations of H. armigera and H. zea from Brazil and H. zea from the USA. Genetic diversity was similar for both species. However, H. armigera was more similar to H. zea from Brazil than H. zea from the USA and some putative hybrid individuals were found in Brazilian populations.Tthere was low gene flow between Brazilian and USA H. zea. The baseline susceptibility to Vip3Aa20 resulted in low interpopulation variation for H. zea (3-fold) and for H. armigera (5-fold), based on LC50. H. armigera was more tolerant to Vip3Aa20 than H. zea (≈ 40 to 75-fold, based on CL50). The diagnostic concentration for susceptibility monitoring, based on CL99, was fairly high (6,400 ng Vip3Aa20/cm2) for H. zea and not validated for H. armigera due to the high amount of protein needed for bioassays. Implementing IRM strategies to Vip3Aa20 in H. armigera and H. zea will be of a great challenge in Brazil, mainly due to the low susceptibility to Vip3Aa20 and high genetic diversity and gene flow in both species, besides a potential of hybrid individuals between H. armigera and H. zea under field conditions.

Comparisons between analogue and numerical models of thrust wedge development

Analogue and finite element numerical models with frictional and viscous properties are used to model thrust wedge development. Comparison between model types yields valuable information about analogue model evolution, scaling laws and the relative strengths and limitations of the techniques. Both model types show a marked contrast in structural style between ‘frictional-viscous domains’ underlain by a thin viscous layer and purely ‘frictional domains’. Closely spaced thrusts form a narrow and highly asymmetric fold-and-thrust belt in the frictional domain, characterized by in-sequence propagation of forward thrusts. In contrast, the frictional-viscous domain shows a wide and low taper wedge and a thrust belt with a more symmetrical vergence, with both forward and back thrusts. The frictional-viscous domain numerical models show that the viscous layer initially simple shears as deformation propagates along it, while localized deformation resulting in the formation of a pop-up structure occurs in the overlying frictional layers. In both domains, thrust shear zones in the numerical model are generally steeper than the equivalent faults in the analogue model, because the finite element code uses a non-associated plasticity flow law. Nevertheless, the qualitative agreement between analogue and numerical models is encouraging. It shows that the continuum approximation used in numerical models can be used to model frictional materials, such as sand, provided caution is taken to properly scale the experiments, and some of the limitations are taken into account.

Radiocarbon ages and last occurrences of Globorotalia menardii flexuosa and Globoquadrina hexagona in Atlantic sediment cores

Ranges of Globorotalia menardii menardii, Gr. menardii flexuosa and Globoquadrina hexagona at time of climatostratigraphic intervals representing oxygen-isotope stages 5-1 are determined by study of dozens of Late Quaternary sediment cores involving constructing paleotemperature curves from planktic foraminifera and oxygen isotope curves for their shells, as well as radiocarbon dating. Gr. menardii flexuosa and Gq. hexagona disappeared about 27-25 ky ago from the subtropical and tropical Atlantic and about 18 ky ago from the equatorial area.

Plane curves of the third order /

Includes bibliographical references and index.

The birational transformations of algebraic curves of genus four.

Thesis (Ph.D.)--Cornell University, 1908.

Theory of compound curves in field engineering.

Reprinted from the University of Colorado studies, v.2, no.2, July 1904.

A short treatise on the principles of the differential and integral calculus.

With an appendix containing some alterations in the author's "Principles of the algebraic theory of curves."

A treatise on geometry and its application in the arts.

Added t.-p., engr.

Curves, prepared for use in the Dept. of mathematics, U. S. Military academy,

Includes "References".

The elementary differential geometry of plane curves,

Mode of access: Internet.

Birth-to-pregnancy intervals and adverse perinatal outcomes among African-born black women in Washington State.

Thesis (Master's)--University of Washington, 2016-06

Three lenses into the cardiac dyad: calcium signaling, microtubule trafficking, and junctional sarcoplasmic reticular mobility

Thesis (Ph.D.)--University of Washington, 2016-06

Functional recycling of C2 domains throughout evolution: A comparative study of synaptotagmin, protein kinase C and phospholipase C by sequence, structural and modelling approaches

The C2 domain is one of the most frequent and widely distributed calcium-binding motifs. Its structure comprises an eight-stranded beta-sandwich with two structural types as if the result of a circular permutation. Combining sequence, structural and modelling information, we have explored, at different levels of granularity, the functional characteristics of several families of C2 domains. At the coarsest level,the similarity correlates with key structural determinants of the C2 domain fold and, at the finest level, with the domain architecture of the proteins containing them, highlighting the functional diversity between the various subfamilies. The functional diversity appears as different conserved surface patches throughout this common fold. In some cases, these patches are related to substrate-binding sites whereas in others they correspond to interfaces of presumably permanent interaction between other domains within the same polypeptide chain. For those related to substrate-binding sites, the predictions overlap with biochemical data in addition to providing some novel observations. For those acting as protein-protein interfaces' our modelling analysis suggests that slight variations between families are a result of not only complementary adaptations in the interfaces involved but also different domain architecture. In the light of the sequence and structural genomic projects, the work presented here shows that modelling approaches along with careful sub-typing of protein families will be a powerful combination for a broader coverage in proteomics. (C) 2003 Elsevier Ltd. All rights reserved.

Effects of boron foliar applications on vegetative and reproductive growth of sunflower

Foliar application may be used to supply boron (B) to a crop when B demands are higher than can be supplied via the soil. While B foliar sprays have been used to correct B deficiency in sunflower (Helianthus annuus L.) in the field, no studies have determined the amount of B taken up by sunflower plant parts via foliar application. A study was conducted in which sunflower plants were grown at constant B concentration in nutrient solution with adequate B (46 mum) or with limited B supply (0.24, 0.40 and 1.72 mum) using Amberlite IRA-743 resin to control B supply. At the late vegetative stage of growth (25 and 35 d after transplanting), two foliar sprays were applied of soluble sodium tetraborate (20.8 % B) each at 0, 28, 65, 120 and 1200 mm (each spray equivalent to 0, 0.03, 0.07, 0.13 and 1.3 kg B ha(-1) in 100 L water ha(-1)). The highest rate of B foliar fertilization resulted in leaf burn but had no other evident detrimental effect on plant growth. Under B-deficient conditions, B foliar application increased the vegetative and reproductive dry mass of plants. Foliar application of 28-1200 mm B increased the total dry mass of the most B-deficient plants by more than three-fold and that of plants grown initially with 1.72 mum B in solution by 37-49 %. In this latter treatment, the dry mass of the capitulum was similar to that achieved under control conditions, but in no instance was total plant dry mass similar to that of the control. All B foliar spray rates increased the B concentration in various parts of the plant tops, including those that developed after the sprays were applied, but the B concentration in the roots was not increased by B foliar application. The B concentration in the capitulum of the plants sprayed at the highest rate was between 37 and 93 % of that in the control plants. This study showed that B foliar application was of benefit to B-deficient sunflower plants, increasing the B status of plant tops, including that of the capitulum which developed after the B sprays were applied. (C) 2003 Annals of Botany Company.

Evaluation of the BEASY program using linear and piecewise linear approaches for the boundary conditions

The boundary element method (BEM) was used to study galvanic corrosion using linear and logarithmic boundary conditions. The linear boundary condition was implemented by using the linear approach and the piecewise linear approach. The logarithmic boundary condition was implemented by the piecewise linear approach. The calculated potential and current density distribution were compared with the prior analytical results. For the linear boundary condition, the BEASY program using the linear approach and the piecewise linear approach gave accurate predictions of the potential and the galvanic current density distributions for varied electrolyte conditions, various film thicknesses, various electrolyte conductivities and various area ratio of anode/cathode. The 50-point piecewise linear method could be used with both linear and logarithmic polarization curves.