Diversidade patogênica em isolados de Thielaviopsis paradoxa provenientes de diferentes áreas produtoras de cana-de-açúcar

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Adsorção de cádmio em Latossolos sob vegetação de mata nativa e cultivados

Heavy metals are found naturally in soils at low concentrations, but their content may be increased by human activity, making them one of the barriers in management of tropical soils. These chemical elements can be found in the composition of organic and inorganic fertilizers, insecticides, fungicides, mine tailings, and urban waste, and may cause serious damage to the environment and human health. Thus, adsorption studies are essential in assessing the behavior of heavy metals in the soil. The objective of this study was to evaluate the influence of soil chemical, particle size, and mineralogical properties on adsorption of cadmium (Cd), evaluated by Langmuir and Freundlich models, in Latossolos (Oxisols) with or without human activity. Soil samples were collected from the surface layer, 0.00-0.20 m, and chemical, particle size, and mineralogical analyzes were performed. In the adsorption study, concentrations of 0, 5, 25, 50, 100, 200, 300, and 400 mu g L-1 of Cd were used in the form of Cd(NO3)(2). The empirical mathematical models of Langmuir and Freundlich were used for construction of adsorption isotherms. Data were analyzed by means of multivariate statistical techniques, Cluster Analysis and Principal Component Analysis. The data from the adsorption experiment showed a good fit to the Langmuir and Freundlich models. Soils with a lower goethite/hematite ratio and greater cation exchange capacity and pH, showed higher maximum adsorption capacity of Cd.

Doenças do pimentão em regiões produtoras do Equador: identificação e manejo da pata seca e ocorrência de viroses

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Avaliação de isolados de Trichoderma spp. para controle de Phytophthora nicotianae

Pós-graduação em Microbiologia Agropecuária - FCAV

Desenvolvimento de uma nova forma de lubri-refrigeração na retificação cilíndrica externa de mergulho de aços endurecidos para uma produção mais limpa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O impacto do problema ambiental do fluido de corte nas indústrias e novas alternativas para sua utilização mais racional nos processos de retificação

Devido à constante preocupação do meio ambiente, o uso de fluidos de corte tem se tornado um problema para a indústria mecânica atual por se tratar de substâncias tóxicas. Seu uso e sua dificuldade de descarte devido rígida Legislação Ambiental, faz com que o fluido de corte seja responsável por uma grande parte do custo final do processo, provocando, desse modo, um grande interesse em pesquisas referentes a métodos alternativos de forma e quantidade de fluido de corte utilizado. Ao lado das vantagens tecnológicas associadas com o uso dos fluidos de corte estão os enormes perigos atrelados a estes, e que são nocivos ao meio ambiente e à saúde das pessoas. A contaminação do solo, água e ar podem decorrer de vazamentos e perdas, emissões, água de lavagem e da própria disposição dos fluidos de corte.Os componentes dos fluidos de corte como bactericidas e fungicidas reagem com outros produtos inseridos no processo de corte, tornando os fluidos, materiais que podem vir a causar doenças. Assim, este trabalho tem como objetivo apresentar a utilização do fluido de corte por mínima quantidade de lubrificação como alternativa para se minimizar o impacto ambiental das indústrias mecânicas.

Distribuição espacial, plano de amostragem sequencial e dinâmica populacional de Anthonomus grandis Boheman (Coleoptera: Curculionidae) em algodoeiro

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Avaliação de um pulverizador e volume ultra baixo e de adjuvantes em caldas fitossanitárias na cultura dos citros

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

O circuito espacial produtivo dos fertilizantes no território brasileiro

This paper has two main objective the study of the productive space circuit of fertilizers in Brazil. For this, we study the company's operations Vale Fertilizers SA More specifically, the production and consumption of fertilizers in Brazil. In the current globalization the Brazilian countryside know new ways of doing (SANTOS, 1994). This, with less roughness, adopts the Green Revolution package, and introduces inputs to the soil, such as seeders, combines, tractors, herbicides, fungicides and fertilizers (Santos & Silveira, 2001). The examination of the Brazilian case as the agricultural modernization reveals the great vulnerability of modern agricultural regions in the face of globalizing modernization (Santos, 2000: 92). The places that receive capital reproduction of imperatives gain a new medium, is the formation of informational scientific technical means, are the bright spots corresponding to other places (Santos, 1994). Thus, the productive circuits are no longer confined to the environment, but establish connections with distant places (Santos, 1986; Frederick & CASTILLO, 2004). What's more, the policy is now made in the market (Santos, 2000, p.67) and the adoption by the Brazilian government's neoliberal policies, the Brazilian state-owned companies related to fertilizer production circuit are privatized, thereby Brazil makes It is further more dependent on inputs used in the field, including fertilizers

Adjuvantes na deposição de aplicações aéreas e terrestres

The Asian rust currently is the main disease of soybean culture, having as characteristics the difficult control, by start at the bottom of plants where penetration of the droplets is harder. The fine droplets has been used with the intention of improve the penetration and increase efficiency of agrochemicals, but that are losses by drift easily. New products have been developed to increase deposition of the drops at targets. The aim of this work was evaluate the TA- 35 capacity to improving the deposition of fungicides spray solution with or without mineral oil by aerial and ground applications. Was used a factorial 3x2, three spray solutions composed by Priori Xtra (concentrated suspension of azoxystrobin 200 g L-1 + cyproconazole 80 g L-1 ) mixed with adjuvants, Nimbus (emulsifiable concentrate containing aliphatic hydrocarbons 428 g L-1 ) and TA-35 (soluble concentrate containing sodium lauryl ether sulfate, surfactants, sequestering agents and emulsifiers), in aerial and ground applications. In ground applications was used 50 L ha-1 , TXA 8002 VS spray nozzles and on aerials was used 15 L ha-1 , Turboaero atomizer, both applying fine droplets. Was utilized the Brilliant Blue (FD & C n. 1) tracer to determine the deposits. There were used glass slides as targets to collect spray droplets. After to extract the tracer of the targets using distilled water, the samples were analyzed by spectrophotometry, thereby was possible quantify the tracer deposited on each glass slide. A study to evaluate possible losses of the tracer by degradation or retention also was done. The comparative analysis of treatments was done by statistical method "Confidence Interval for Differences Between the Averages" with 95% of confidence degree (IC95%). There was degradation or retention of the tracer between the processes of application of the droplets and the processing of the samples. The deposition averages with the presence of TA-35 were greatest for both sprayers however, there were not significant differences among the treatments. The viability of TA-35 use may consider other parameters or complementary studies.

Eficácia do flutriafol e do flutriafol + tiofanato metílico aplicados com gotas finas ou médias no controle da ferrugem asiática da soja

The aim of this study was to evaluate the influence of fine and medium droplets in the performance of flutriafol and thiophanate methyl + flutriafol for the control of Asian Soybean Rust (Phakopsora pachyrhizi Sydow & Sydow). The experiment was a 2 x 2 factorial design (2 droplet sizes x 2 fungicides) resulting in four treatments with six replications. The experimental area was set up with 24 plots (50 x 21 m). In each plot there was a central assessment area with 10 x 20 m. To the each plot there was a non-treated area placed in opposed direction to the wind. The evaluations of rust control were made by of the calculation of incidence (percentage of plants with rust), severity (level of infection), defoliations and soybean yield. The results were analyzed by the calculation of the confidence interval at 90%. The study was set up in curative control conditions with average infestation of 68.6%, average severity in the lower part of the canopy was of 35.9% and on the upper parte it was 4.57%. The results of severity, defoliation and productivity did not show statistical difference among the treatments. However, it was observed that in general there was tendency of better results with the application of flutriafol alone comparing with thiophanate methyl + flutriafol, since there was a small difference between two commercial products in the flutriafol active ingredient content (62.5 g ha-1 to the flutriafol alone and 60 g ha-1 to the thiophanate methyl + flutriafol). There was no statistical difference between fine and medium droplets. This fact can be explained by the characteristics of systemic action of the flutriafol and by the type of control made (curative). The flutriafol, being a systemic fungicide is less sensitive to the better coverage provided by the smaller droplets and, on the curative control, the amount of product deposited can became more import than coverage, mainly on the superior part of the leaves. These leaves are healthier than the inferior leaves that in general are the first to become completely compromised by the rust, losing importance to the plant. By this reason, medium droplets appear to have offered similar performance even not offering advantages in the leaf coverage. This fact may become important because in the practical side of the use of medium droplets, since this may increase the amount of time to spray, mainly because the fine and very fine droplets have more limitations related to drift and evaporation.

Seletividade de produtos fitossanitários utilizados na cultura da soja para pupas de Trichogramma pretiosum Riley, 1879 (Hymenoptera: Trichogrammatidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do manejo cultural e químico na incidência e severidade da mancha-preta dos citros

A citricultura apresenta vários problemas fitossanitários, dentre os quais a mancha-preta dos citros (Guignardia citricarpa). O controle desta doença baseia-se no emprego de práticas culturais e no uso de fungicidas. Avaliou-se o efeito do manejo do mato em conjunto com o químico no controle da doença. Os experimentos foram instalados em pomares de laranjeiras-doces, nos municípios de Matão, Rio Claro e Mogi Guaçu, no Estado de São Paulo. No manejo do mato, comparou-se o uso isolado de roçadeira ecológica com o conjugado rastelo mecânico e trincha, aos 35 dias, após 2/3 de pétalas caídas. No controle químico, foram realizadas duas pulverizações com fungicida protetor e de 2 a 5 pulverizações da mistura de produto sistêmico com protetor, aos 45 dias, após 2/3 de pétalas caídas, em intervalos de aplicação de 35 dias. Em todas as aplicações, foi adicionado óleo mineral emulsionável (0,25%). Avaliou-se a área abaixo da curva de progresso da incidência e severidade da doença, com os dados de cinco avaliações realizadas quinzenalmente, a partir da maturidade fisiológica dos frutos. Em todas as áreas, o uso do controle químico, associado com o manejo do mato, reduziu a intensidade da doença.

Tratamientos de depuración de aguas residuales contaminadas con pesticidas

[ES] En el presente trabajo se ha comparado la eficiencia de los tratamientos biológicos y fotocatalíticos en la depuración de aguas contaminadas con dos pesticidas: Pirimetanil y Triadimenol, ampliamente utilizados como fungicidas sistémicos en la lucha contra plagas de hongos en los cultivos de tomate de la isla de Gran Canaria. Ambos compuestos son considerados tóxicos para organismos acuáticos, hecho que justifica la necesidad de estudiar un tratamiento efectivo de depuración de aguas residuales que los contengan, antes de proceder a su vertido. Paralelamente, se ha llevado a cabo el mismo estudio con otro contaminante orgánico: Resorcinol, con mayor biodegradabilidad que los pesticidas estudiados. Los resultados obtenidos en el presente trabajo indican que las aguas contaminadas con ambos pesticidas deben ser tratadas mediante procesos fotocatalíticos, mientras que, en el caso de Resorcinol, el tratamiento debe ser mediante procesos de depuración biológicos.

Destoxificación fotocatalítica de pesticidas usuales en la agricultura ecuatoriana

Programa de doctorado: Ingeniería Ambiental y Desalinización.