Assessment of oral bioaccessibility of arsenic in playground soil in Madrid (Spain): A three-method comparison and implications for risk assessment

Three methodologies to assess As bioaccessibility were evaluated using playgroundsoil collected from 16 playgrounds in Madrid, Spain: two (Simplified Bioaccessibility Extraction Test: SBET, and hydrochloric acid-extraction: HCl) assess gastric-only bioaccessibility and the third (Physiologically Based Extraction Test: PBET) evaluates mouth–gastric–intestinal bioaccessibility. Aqua regia-extractable (pseudo total) As contents, which are routinely employed in riskassessments, were used as the reference to establish the following percentages of bioaccessibility: SBET – 63.1; HCl – 51.8; PBET – 41.6, the highest values associated with the gastric-only extractions. For Madridplaygroundsoils – characterised by a very uniform, weakly alkaline pH, and low Fe oxide and organic matter contents – the statistical analysis of the results indicates that, in contrast with other studies, the highest percentage of As in the samples was bound to carbonates and/or present as calcium arsenate. As opposed to the As bound to Fe oxides, this As is readily released in the gastric environment as the carbonate matrix is decomposed and calcium arsenate is dissolved, but some of it is subsequently sequestered in unavailable forms as the pH is raised to 5.5 to mimic intestinal conditions. The HCl extraction can be used as a simple and reliable (i.e. low residual standard error) proxy for the more expensive, time consuming, and error-prone PBET methodology. The HCl method would essentially halve the estimate of carcinogenic risk for children playing in Madridplaygroundsoils, providing a more representative value of associated risk than the pseudo-total concentrations used at present

In vitro reconstitution of light-harvesting POR-protochlorophyllide complex with protochlorophyllides a and b

NADPH:protochlorophyllide oxidoreductase (POR; EC1.1.33.1) is a key enzyme for the light-induced greening of angiosperms. In barley, two POR proteins exist, termed PORA and PORB. These have previously been proposed to form higher molecular weight light-harvesting complexes in the prolamellar body of etioplasts (Reinbothe, C., Lebedev, N., and Reinbothe, S. (1999)Nature 397, 80–84). Here we report the in vitro reconstitution of such complexes from chemically synthesized protochlorophyllides (Pchlides) a andb and galacto- and sulfolipids. Low temperature (77 K) fluorescence measurements revealed that the reconstituted, lipid-containing complex displayed the same characteristics of photoactive Pchlide 650/657 as the presumed native complex in the prolamellar body. Moreover, Pchlide F650/657 was converted to chlorophyllide (Chlide) 684/690 upon illumination of the reconstituted complex with a 1-ms flash of white light. Identification and quantification of acetone-extractable pigments revealed that only the PORB-bound Pchlide a had been photoactive and was converted to Chlide a, whereas Pchlide b bound to the PORA remained photoinactive. Nondenaturing PAGE of the reconstituted Pchlide a/b-containing complex further demonstrated a size similar to that of the presumed native complexin vivo, suggesting that both complexes may be identical.

Bio recuperación de suelos salinos con el uso de materiales orgánicos.

El suelo es un importante recurso natural que necesita ser preservado y mejorado para permitirle mantener su calidad y capacidad productiva, para ello se deben proponer y aplicar prácticas sostenibles que permitan recuperar aquellos suelos degradados por un mal manejo del hombre, como por ejemplo la salinización. El objetivo planteado fue evaluar la biorecuperación de un suelo con problemas salino-sódico con la aplicación de dos proporciones (1,5 y 3% (p/p)) de tres enmiendas orgánicas: compost, vermicompost sólido y Lemna mesclados o no con el 100% de los requerimientos de fosfoyeso, generándose 15 tratamientos (incluyendo tres controles). La evaluación se realizó a través de tres ensayos: 1. Columnas simuladas de suelo. 2. Evolución de CO2 y 3. Crecimiento de plántulas de tomate. El suelo objeto de estudio está clasificado my como Fluventic Haplustepts, y fue tomado de una zona de la Hacienda Alto Viento, con una latitud de 10° 2' 15 N y una longitud de 72 ° 34' 15 W, en el estado de Zulia – Venezuela. Se tomó una muestra compuesta por 20 submuestras de 20 cm de profundidad del área problema, se secó al aire (2,3% de humedad), se tamizó y homogenizó. El suelo y las enmiendas orgánicas fueron caracterizadas. Los materiales orgánicos; compost y vermicompost fueron procesados en la misma Hacienda con el uso de estiércol de ganado bovino; la Lemna fue recolectada de orillas del Lago de Maracaibo en la ciudad de Maracaibo. El suelo se mezcló a las proporciones indicadas se le midió respiración basal y el efecto sobre la germinación de semillas de tomate y se empaquetó en un tubo de polietileno de 7,1 cm de diámetro y 70 a 90 cm de longitud, según la altura de la mezcla del suelo con la enmienda. El fondo de cada columna fue rellenado con 40 cm de arena lavada para facilitar el drenaje. En cada columna se utilizó la misma cantidad de suelo (1055 mg), la altura que ocupó dentro de las columnas dependió del tipo de enmienda orgánica y su proporción, la cual modificó la Da del suelo (1,328±0,05 g•cm-3). La altura dentro de la columna varió desde 20 cm para el suelo sin enmienda hasta 38,33±0,8 cm para el suelo enmendado con Lemna al 3,0%. Transcurrido el periodo de tres meses tiempo en el cual el suelo enmendado y colocado en las columnas fue lavado con una cantidad de agua que equivalente a la tasa de infiltración, la cual se calculó a partir de la precipitación anual de la zona y las perdidas por evaporación y escorrentía; se fraccionó en tres secciones de 7, 7 y 6 cm de longitud, y el suelo de cada fracción se secó al aire y se tamizó, y se le midió CEextr, pH, cationes en solución y cationes extraíbles para calcular el RAS y el PSI. Se tomó una cantidad equivalente de cada sección para conformar una muestra de 50 g de suelos a los cuales se le midió respiración basal e igualmente se tomó suelo para evaluar la germinación y crecimiento de plántulas de tomate. Se detectaron diferencias significativa (p<0,05) entre tratamientos, según la prueba de Tukey, para la variables evaluadas, aunque no hubo diferencias entre las proporciones ni entre la utilización del fosfoyeso mezclado con las enmiendas orgánicas. La enmienda que mostró menos potencial en la bio remediación fue la Lemna por sus altos contenidos de Na+. La metodología de las columnas simuladas del suelo, bajo las condiciones de estudio, no fue del todo adecuada para evaluar la bio remediación debido que en el suelo control por efecto de la aplicación de agua también hubo recuperación del mismo por su disminución en el la CE, RAS y PSI y en algunas variables su recuperación fue mayor que en aquellos enmendados con Lemna. Tomando en la respuesta del cultivo la mejor enmienda fue el vermicompost Abstract The soil is an important natural resource that needs to be preserved and improved to maintain its quality and production potential. Therefore, it is necessary to propose and apply sustainable practices that permit the recovery of soils that have been degraded by inadequate management, among these saline soils. The objective of this study was to evaluate the bioremediation of a saline-sodic soil through the application of two proportions (1,5 and 3% (p/p) of three organic amendments: compost, vermicompost and Lemna, mixed or not with gypsum phosphate, resulting in 15 treatments (including 3 controls). The evaluation was conducted through three tests: 1. Simulated soil columns. 2. Evolution of CO2 and 3. Growth of tomato seedlings The soil under evaluation was classified as Fluventic Haplustepts and was collected from the Alto Viento farm located at 10° 2' 15 North Latitude and 72° 34' 15 West longitude, in Zulia State, Venezuela. A composite soil sample, integrated of 20 subsamples taken to a depth of 20 cm collected in the problem area, was air dried (2.3 % moisture), sieved and homogenized. Soil and organic amendments were characterized. Organic material for the compost and vermicompost were obtained on the farm using cattle manure, whereas the Lemna was collected from the shores of Lake Maracaibo outside Maracaibo city. The soil was mixed in the above-mentioned proportions and its baseline respiration rate and effect on the germination of tomato seeds were recorded. Soil was packed in a PVC pipe (7,1 cm diameter and 70-90 cm length) to simulate a soil column. The bottom of each column was filled out with 40 cm of washed sand to facilitate drainage. The same amount of soil was used in each column (1,055 mg), but the height of the column varied according to the organic amendment and its proportion, which modified the apparent density of the soil (1,328±0,05 g•cm-3). The height of each column varied from 20 cm for the soil without amendment to 38,33±0,8 cm for the soil with 3% Lemna. After three months, the soil was treated with water (using the equivalent of the problem area infiltration rate), and was divided into three sections (7, 7 and 6 cm length). The soil from each section was air dried, sieved and its cationic exchange capacity, pH, cation solutions and extractable cations were measured to estimate RAS and PSI. An equivalent portion of each section was collected to compose a 50 g soil sample, and baseline respiration rate and tomato seedlings growth were recorded. Statistical differences (p<0,05) were observed among treatments for the variables under evaluation. Tukey test showed no differences among the proportions of organic amendments nor with the addition of gypsum phosphate to the organic amendments. The amendment which showed the lowest bioremediation potential was the Lemna, as a result of its high Na+ concentration. Under the conditions of this study, the soil column methodology used showed limitations to evaluate bioremediation because the control soil column, after being rinsed with water, also showed improvements as CE, RAS and PSI values were reduced. For some variables, the improvement noted in the control soil column surpassed those obtained with the soil amended with Lemna. Based on the best crop response amendment was vermicompost 3%.

Reduction of Nutrient Losses with Eroded Sediments by Post-Fire Soil Stabilisation Techniques

After an experimental fire in steep shrub land in a temperate–humid region (north-west Spain), the effects of two post-fire stabilisation treatments (grass seeding and straw mulching) on the chemical properties of eroded sediments,and the amount of nutrients lost with them, we reevaluated relative to control burnt soil, over a period of 13 months. Total C and N concentrations, and d 13 C, indicated that sediments were mainly contributed by charred plant and litter material. The highest concentrations of extractable base cations in the sediments occurred during the first 3 months following fire, especially for Na and K. As treatments had little or no effect on nutrient concentration in sediments, differences in nutrient losses were due to the 10-fold lower sediment production in mulching compared with other treatments. In control and seeding treatments, the accumulated amounts of nutrients lost with sediments were 989–1028kgha 1 (C), 77kgha 1 (N), 1.9–2.4kgha 1 (Ca), 0.9–1.1kgha 1 (Mg), 0.48–0.55kgha 1 (NH 4 þ –N), 0.39–0.56kgha 1 (K), 0.19–0.34kgha 1 (Na) and , 0.1kgha 1 (P and NO 3 –N) . These values accounted for 22–25% (total C and N) and 5–12% (NH 4 þ –N, Ca, P and Mg) of available nutrients in ash, and 1.0–2.4% of those in ash þ topsoil. As nutrient and sediment losses were strongly correlated, the reduction of the latter by mulching application leads to an effective decrease of post-fire nutrient losses.

Impact of fire and post-fire management techniques on soil chemical properties

The effects of fire ( Control burned soil) and two emergency stabilisation techniques (grass Seeding and straw Mulching ) on 20 chemical characteristics were evaluated on 0 – 5 cm top-soils sampled 1, 90, 180 and 365 days after an experimental fi re in a steep shrubland of a temperate-humid region (NW Spain). Most part of pH (in H 2 O and KCl) variance was explained by the sampling date. No clear temporal trends were identi fi able for total soil C and N content, likely due to the large SOM pool in these soils; however, changes on soil δ 13 C were explained by the deposition of 13 C-depleted ashes, followed by its progressive erosion, while those on soil δ 15 N were a consequence of fi re induced N outputs. After the fi re, NH 4 + – N, P, Na, K, Mg, Ca, Mn, Cu, Zn and B concentrations increased, while those of NO 3 − – N, Al, Fe and Co did not vary significantly. Despite a significant decline with time, concentrations of Mg, Ca and Mn at the end of the study were still higher than in unburned soil, while those of K, Cu, Zn and B were similar to the pre-fire levels and those of NH 4 + – N, P and Na were below pre-fire values. Mulching and Seeding treatments for burned soil emergency stabilisation had significant effects on soil δ 15 N and extractable K, Mg and Ca, while data were inconclusive for their possible effects on the extractable Al, Fe and Co

Diagnosis and Management of Grain-Induced Asthma

Grain-induced asthma is a frequent occupational allergic disease mainly caused by inhalation of cereal flour or powder. The main professions affected are bakers, confectioners, pastry factory workers, millers, farmers, and cereal handlers. This disorder is usually due to an IgE-mediated allergic response to inhalation of cereal flour proteins. The major causative allergens of grain-related asthma are proteins derived from wheat, rye and barley flour, although baking additives, such as fungal α-amylase are also important. This review deals with the current diagnosis and treatment of grain-induced asthma, emphasizing the role of cereal allergens as molecular tools to enhance diagnosis and management of this disorder. Asthma-like symptoms caused by endotoxin exposure among grain workers are beyond the scope of this review. Progress is being made in the characterization of grain and bakery allergens, particularly cereal-derived allergens, as well as in the standardization of allergy tests. Salt-soluble proteins (albumins plus globulins), particularly members of the α-amylase/trypsin inhibitor family, thioredoxins, peroxidase, lipid transfer protein and other soluble enzymes show the strongest IgE reactivities in wheat flour. In addition, prolamins (not extractable by salt solutions) have also been claimed as potential allergens. However, the large variability of IgE-binding patterns of cereal proteins among patients with grain-induced asthma, together with the great differences in the concentrations of potential allergens observed in commercial cereal extracts used for diagnosis, highlight the necessity to standardize and improve the diagnostic tools. Removal from exposure to the offending agents is the cornerstone of the management of grain-induced asthma. The availability of purified allergens should be very helpful for a more refined diagnosis, and new immunomodulatory treatments, including allergen immunotherapy and biological drugs, should aid in the management of patients with this disorder.

Bioaccessibility of heavy metals and risk assessment in urban gardens of Madrid

Human health problems and solutions. Urban gardening has spread worldwide in recent years as it enhances food security and selfsupply and promotes community integration. However urban soils are significantly enriched in trace elements relative to background levels. Exposure to the soil in urban gardens may therefore result in adverse health effects depending on the degree of contact during gardening, infant recreational activities and ingestion of vegetables grown in them. In order to evaluate this potential risk, 36 composite samples were collected from the top 20 cm of the soil of 6 urban gardens in Madrid. The aqua regia (pseudototal) and glycine-extractable (bioaccessible) concentrations of Co, Cr, Cu, Ni, Pb and Zn were determined by atomic absorption spectrophotometry. Additionally, pH, texture, Fe, Ca, and Mn concentrations, and organic matter and calcium carbonate contents were determined in all urban gardens and their influence on trace element bioaccessibility was analyzed.

Aeroacoustics in high speed trains

Este trabajo se centra en el estudio de problemas aeroacústicos en los trenes de alta velocidad. Se han considerado dos escenarios en los que las ondas de presión generadas son críticos para el confort de los pasajeros. Uno es el debido a las ondas de presión que genera el tren cuando entra y sale de un túnel, que a su vez producen saltos de presión de baja frecuencia en el tren (cuando se cruzan con él) y en los alrededores del túnel cuando alcanzan la salida. Se estudia este fenómeno, y se propone un sistema aeroelástico basado en el galope transversal para disminuir la energía de estas ondas, y se analiza la energía extraíble de las ondas utilizando cuerpos con diferentes secciones transversales [Sorribes-Palmer and Sanz-Andres, 2013]. La influencia de la geometría de los portales en la energía radiada hacia el exterior de túnel es analizada experimentalmente, prestando especial atención a las boquillas porosas. Las ondas de presión en el interior del túnel se han analizado mediante el método de las características. Se han realizado ensayos experimentales para estimar la energía reflejada hacia el interior del túnel al alcanzar las ondas de presión el portal de salida del túnel. Se ha estudiado la formación e interacción entre el portal del túnel y la onda de choque generada en los túneles de gran longitud y pequeña fricción. Se propone un método para describir de forma aproximada el ruido radiado al exterior. Por otro lado se ha estudiado el ruido de media y alta frecuencia de origen aerodinámico. Se ha estudiado la influencia del desprendimiento de la capa límite sobre el tren. Se propone una metodología basada en una sección de tren característica para predecir rápidamente el nivel de presión de sonido dentro y fuera del tren para todo el rango de frecuencias. Se han realizado medidas experimentales en vía de los espectros de presión sobre la superficie del tren, y de la transmisibilidad de las uniones entre estructura y revestimiento. Los resultados experimentales se han utilizado en los modelos vibroacústicos. El método de la sección del tren característica es especialmente útil a altas frecuencias cuando todo el tren se puede modelar mediante el ensamblaje de diferentes secciones características utilizando el análisis estadístico de la energía. ABSTRACT This work is focused on the study of aeroacoustic problems in high speed trains. We have considered two scenarios in which the pressure waves generated are critical for passengers comfort. The first one is due to the pressure waves generated by a train entering in a tunnel. These waves generate pressure gauges inside the train (when they find each other) and outside of the tunnel portals. This phenomenon has been studied, and an aeroelastic system based on transverse galloping to reduce the energy of these waves is proposed. The maximum extractable energy by using bodies with different cross-section shapes is analyzed. The influence of the portals geometry in the energy radiated outwards the tunnel is analyzed experimentally, with particular attention to the porous exits. The pressure waves inside the tunnel have been analyzed using the method of characteristics. Experimental tests to estimate the energy reflected into the tunnel when the pressure waves reach the tunnel portal have been performed. We have studied the generation and interaction between the tunnel portal and a shock wave generated in long tunnels with small friction. A method to describe in an approximated way the pressure radiated outside the tunnel is proposed. In the second scenario, middle and high frequency noise generated aerodynamically has been studied, including the influence of the detachment of the boundary layer around the train. A method based on a train section to quickly predict the sound pressure level inside and outside the train has been proposed. Experimental test have been performed on board to evaluate the pressure power spectra on the surface of the train, and the transmissibility of the junctions between the structure and trim. These experimental results have been used in the vibroacoustic models. The low frequency pressure waves generated with the train during the tunnel crossing has been identified in the pressure spectrum. The train characteristic section method is especially useful at high frequencies, when the whole train can be modeled by assembling different sections using the statistical energy analysis. The sound pressure level inside the train is evaluated inside and outside the tunnel.