Energia de briquetes produzidos com rejeitos de resíduos sólidos urbanos e madeira de Eucalyptus grandis

The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg-1. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary.

Respostas de clones de Eucalyptus grandis e E. grandis x E. urophylla à supressão de boro

The present work had as objective the study of clones of Eucalyptus grandis and E. grandis × E. urophylla under boron suppression on growth in height and diameter, development of symptoms of deficiency, boron content in leaf and polyols production. Plants were cultivated in pots with quartz in a greenhouse using two levels of boron per solution (0 and 0.5 mg L-1 of B). The 32 treatments followed a factorial scheme: 16 × 2 -16 clones and two doses of boron in a randomized block experimental design, with fve repetitions, totaling 160 plots. Plants were evaluated weekly for deficiency symptoms and monthly for height, stem diameter and leaf content of boron in different plant parts. The content of polyols was measured in two occasions: at 162 days and 192 days after starting the experiment. Decrease of growth and quick development of deficiency symptoms 40 days after boron suppression were observed, as well as a decrease of polyols synthesis. Foliar analysis, with boron supplement, resulted in the presence of mannitol and sorbitol in high enough concentration so that the evaluated plants could be considered rich in those polyols. Under boron suppression, boron levels in different portions of branches and stems of plants, as well as the presence of mannitol and sorbitol, indicated a conditional mobility of boron in Eucalyptus.

Regeneração natural de espécies da Mata Atlǎntica em sub-bosque de Eucalyptus saligna Smith. em uma antiga unidade de produção forestal no Parque das Neblinas, Bertioga, SP

This study aimed at characterizing the potential for natural regeneration of native vegetation in the under-story of an earlier Eucalyptus saligna Smith production stand. The study was carried out at the Parque das Neblinas, Bertioga municipality, SP, in a 45 ha third rotation stand; which had been abandoned 15 years ago for natural regeneration to occur. The sampling was done in 24 plots of 20 × 40 m. The sampled area was of 19,200 m2, with inventory made of 100% of the eucalyptus trees. All regeneration trees with a height ≥ 1.30 m and DBH ≥ 5.0 cm were measured, as well as adult individuals with DBH ≥ 5.0 cm; surveyed in two size classes. 1,417 individuals of E. saligna were measured, with a density of 738,02 individuals/ha and a basal area of 22.69 m2/ha. Among 2,763 natural regeneration individuals, 111 species belonged to 66 genera and 34 botanical families. The species represented 43.7% of the tree richness of neighboring native forest fragments. The total estimated density and the basal area were respectively 1,052.6 individuals/ha and 6.4 m2/ha of autochthonous trees with DBH ≥ 5.0 cm (Class 1); while for regeneration there were 3,864.58 individuals/ha, and 2.76 m2/ha of individuals with a height ≥ 1.30 m and DBH < 5.0 cm (Class 2). Shannon diversity (H') was 2.83 and 3.68, respectively, for Classes 1 and 2, and the corrected species richness for a 1000-individual sample (R1000) were 75.6 and 87.29 (Fisher's a index) for the same classes. The majority of the species (34.84%) was typical from the understory of wet tropical forest and had zoochoric fruit dispersal (67.57%). The results indicate that, under these conditions, a eucalyptus forest is able to provide adequate regeneration niches for native vegetation, and may represent a sink habitat for local populations.

Interferěncia da comunidade infestante sobre plantas de Eucalyptus grandis de segundo corte

Currently Brazil is one of the leading paper and pulp producers in the world market, where Sao Paulo State boasts the greatest production. Because of the pulp prices falling in the world market and the low costs of a second coppice rotation, two experiments (started May and December, 2000) were conducted to evaluate the effects of weeds and of weed-free periods (0, 3, 6, 9, 12, 15 and 18 months) on the growth of Eucalyptus grandis second coppice plants. The field trials were set up in a randomized block design with four replicates and the experimental plots consisted of three rows of fve plants. The December weed community was composed mainly of Brachiaria decumbens (Surinam grass) and Panicum maximum (Guinea grass) and the May weed community was composed mainly by B. decumbens and Digitaria insularis (Sour-grass). Weeds had a low negative influence on growth, diameter development and macronutrients content of E. grandis second coppice plants. In both experiments, slight reductions in growth were observed only between the fully weeded and weed-free periods, after 18 months.

Selection of endogenous genes for gene expression studies in Eucalyptus under biotic (Puccinia psidii) and abiotic (acibenzolar-S-methyl) stresses using RT-qPCR

Background: Rust caused by Puccinia psidii Winter has been limiting for the establishment of new Eucalyptus plantations, as well as for resprouting of susceptible genetic materials. Identifying host genes involved in defense responses is important to elucidate resistance mechanisms. Reverse transcription-quantitative PCR is the most common method of mRNA quantitation for gene expression analysis. This method generally employs a reference gene as an internal control to normalize results. A good endogenous control transcript shows minimal variation due to experimental conditions. Findings. We analyzed the expression of 13 genes to identify transcripts with minimal variation in leaves of 60-day-old clonal seedlings of two Eucalyptus clones (rust-resistant and susceptible) subjected to biotic (P. psidii) and abiotic (acibenzolar-S-methyl, ASM) stresses. Conclusions. For tissue samples of clones that did not receive any stimulus, a combination of the eEF2 and EglDH genes was the best control for normalization. When pathogen-inoculated and uninoculated plant samples were compared, eEF2 and UBQ together were more appropriate as normalizers. In ASM-treated and untreated leaves of both clones, transcripts of the CYP and elF4B genes combined were the ones with minimal variation. Finally, when comparing expression in both clones for ASM-treated leaves, P. psidii-inoculated leaves, ASM-treated plus P. psidii-inoculated leaves, and their respective controls, the genes with the most stable expression were EgIDH and UBQ. The chitinase gene, which is highly expressed in studies on plant resistance to phytopathogens, was used to confirm variation in gene expression due to the treatments. © 2010 Laia et al; licensee BioMed Central Ltd.

Variação genética para caracteres anatômicos e retração volumétrica e sua correlação com a densidade básica da madeira em uma população base de Eucalyptus camaldulensis Dehn

Eucalyptus camaldulensis has great importance in Brazil because of their phenotypic plasticity for different environmental conditions, as soils, altitudes and rainfall. This study is an investigation of a base population of E. camaldulensis from Australia through a progeny test implanted in Selvíria, MS. The trial was established in a randomized block design, with 25 families and 60 replications of single tree plots. Genetic parameters for anatomic traits and volume shrinkage were estimated, as well as their correlations with wood basic density. No significant differences among progenies were observed for the traits studied. The additive genetic variation coefficient at individual and among progeny levels ranged from low (0.26%) to high (16.98%). The narrow sense heritability at individual and family means levels also ranged from low (0.01) to high (0.87). This indicates that some traits are under strong genetic control and can be improved by selection. In the present situation, in order to attain the highest genetic gains, the sequential selection among and within progeny would be recommended.

Capim-colonião e seus efeitos sobre o crescimento inicial de clones de eucalyptus × urograndis

This study aimed to evaluate the guinea grass effect (Panicum maximum) on the initial growth of different Eucalyptus × urograndis clones. Two assays were established with eucalyptus clones and guinea grass seedlings. The plants were grown in plots with cement borders filled with soil. Each plot received a eucalyptus seedling. The first assay had a completely randomized experimental design, with three replications, and treatments in a 5x2 factorial scheme (five eucalyptus clones and the absence or presence of two guinea grass plants at 10 cm distance from eucalyptus seedling). The second assay was similar to the first, however with three eucalyptus clones. The experimental design was completely randomized, with five replications, and a 3x2 factorial scheme (three eucalyptus clones and the absence or presence of two guinea grass plants). The presence of eucalyptus clones did not affect guinea grass development. The eucalyptus clones that coexisted with guinea grass plants did not show differences in their development, making the clones equal when under competition. The most susceptible characteristics of eucalyptus clones to guinea grass were foliar area, shoot and stem dry matter. Clone 3 showed the most sensitivity to guinea grass, and clone 1 was the most tolerant, but all clones studied suffered a negative interference from guinea grass.

Influência do cancro basal em Eucalyptus grandis nas propriedades da madeira e polpação kraft

The objective of this research is to assess the influences of basal canker on wood properties for the kraft pulp production. The material consisted of seeded E. grandis trees classified into 4 levels of basal canker severity (0, 1, 2 and 3) and installed in three soil types classified by texture (AQ1 and AQ2 - 10 to 15% clay, and LEm2 - 26 to 35 clay). The sampling consisted of randomly selecting five trees for each for each canker severity level and soil type, totaling 60 trees (4 canker levels x 3 soil types x 5 trees). These trees were fallen and cut into sections at 0, 25, 50, 75 and 100% of the commercial height for the collection of disk and logs of wood. The results showed that the soil texture influences in the Eucalyptus canker severity and this fact should be considered when assessing the wood properties and their final destination. The texture of the soil and the severe levels of basal canker influence the wood properties, and therefore the kraft pulping.

Qualidade fisiológica de sementes de diferentes árvores matrizes de Corymbia citriodora (Hook.) K.D.Hill & L.A.S. Johnson

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of hydric deficiency on gas exchange parameters and metabolism of Eucalyptus grandis clones

The metabolic effects caused by hydric deficiency (HD) on Eucalyptus grandis clones were assessed by an experiment where plants were cultivated in four blocks. The first was the control block, normally irrigated, whereas the other three blocks were submitted to cycles of hydric deficiency. Analysis of photosynthetic efficiency, enzymatic activity of antioxidant response system, level of pigments and L-proline concentration were performed to evaluate the HD effects. Results showed that HD altered some parameters related to photosynthetic activity, pigments accumulation, proline and enzymatic activity. Clone 433 of E. grandis presented higher response ability to HD.

Estimativas de parâmetros genéticos para caracteres quantitativos em progênies de polinização aberta de Eucalyptus urophylla

Eucalyptus urophylla S. T. Blake is outstanding for valuable wood production potential, adaptation plasticity for different environmental conditions, and for tolerance to canker. However, genetic improvement of this specie in Brazil depends on the existence of genetic variability in the introduced populations. The objective of this study was to investigate the genetic variation and gains in quantitative traits in a population established in 1992 in Selvíria - MS. The progeny trial was established in a partially balanced, 8 x 8 lattice design, with 64 families, collected at Anhembi Experimental Station (IPEF/ESALQ/USP). Each plot was made up of eight trees planted in a 3 × 3 m spacing. Significant among families genetic variations were observed in diameter at breast height (DBH), bark type, stem form, and survival. Estimates of average family heritability were high for all traits, ranging from 0.50 to 0.85. The simulated selection by using multi-effect index showed that under a varying number of plants per family. This method is the most indicated to maximize genetic gains (7.24%) and the effective population size (69.3). These results are a useful support for the transformation of this test into a seedling seed orchard and to become a source of vegetative material to build a clonal seed orchard.

Cisalhamento na Linha de Cola de Compensados de Eucalyptus sp. e Adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being carried out with the intention to improve their properties, taking into account a lower environmental impact. To this end, new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no polluting harmful to health chemicals in their composition, in contrast to formaldehyde-based resins; which in turn are the most commonly used for wood panels production these days. This study tested three different formulations of PVA adhesives, with different pressing times and temperatures for the production of Eucalyptus sp. plywood, obtaining satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared to the urea-formaldehyde and phenol-formaldehyde panels found in the literature.

Desenvolvimento Inicial de Plantas de Eucalyptus Platyphylla Submetidas A Níveis de Salinidade

The objective of this study was to evaluate the behavior of morphological Eucalyptus platyphylla when subjected to five levels of soil salinity. The research project was conducted in a greenhouse at the experimental area of the Department of Agricultural Engineering of the FCA / UNESP, Botucatu-SP, utilizing plastic pots filled with soil containing NaCl concentrations, in sufficient quantities to raise the level of electrical conductivity. The experiment was conducted in randomized blocks in factorial scheme 5 x 4, 5 electrical conductivities (1.41, 2.50, 4.50, 6.45 and 8.33 dS m-1) and four repetitions. The results showed that soil salinity did not significantly affect the following parameters: height, green mass and dry matter of shoot, and root and leaf area of the plants.

Estimativa Da Água No Solo Em Floresta de Eucalyptus Grandis

The study aimed to assess the moisture and density of the soil, the amount of water stored in the profile, and the average soil's porosity with Eucalyptus grandis reforestation, compared to bare soil. The study areas are located in the Paulista region, in São Paulo, Brazil. The samples were collected in layers of 0, 20, 40, 60, 100 and 300 cm, in the months of April, June, August and October 2008. The results show that the density is lower and the porosity is higher in Eucalyptus forest soil compared to bare soil, due to the higher content of organic matter in forest leaf litter. Furthermore, the forest soil has a lower amount of water stored in profile than the bare soil without vegetation.

Estimating hardness of eucalyptus wood with a portable hardness tester

More than 80% of the 29600 km of the Brazilian railroad mesh employs wooden sleepers. The problem of hard availability of native wood for this purpose leads to the alternative use of reforestation species to produce sleepers. Considering the great difficulty to, in field condition, evaluate characteristics that are of major importance to define its suitability to sleeper production the Research Group on Forest Products from FCA/UNESP - Brazil had developed equipment for field evaluation of hardness in wood - Portable Hardness Tester. This paper reports the functional validation tests, performed with different species of Eucalyptus. Results revealed the equipment great functionality, easy-to-use characteristics and applicability to Eucalyptus wood. Moderate to strong relationships between laboratory and validated values of hardness were found. The best validation model was obtained using the data provided by the experimental dispositive 3 (R2=0.74 and SSE= 7.71 kJ/m2) while the experimental dispositive 1 gave the worse validation (R2=0.55 and SSE= 13.46 kJ/m2).