Heavy metals and carbon isotope concentrations in recent Baltic Sea sediments

Recent sediment cores of the western Baltic Sea were analyzed for heavy metal and carbon isotope contents. The sedimentation rate was determined from radiocarbon dates to be 1.4 mm/yr. The 'recent age' of the sediment was about 850 yr. Within the upper 20 cm of sediment, certain heavy metals became increasingly enriched towards the surface; Cd, Pb, Zn and Cu increased 7-, 4-, 3- and 2-fold, respectively, whereas Fe, Mn, Ni and Co remained unchanged. Simultaneously, the radiocarbon content decreased by about 14 per cent. The enrichment in heavy metals as well as the decrease in the 14C-concentration during the last 130 ± 30yr parallels industrial growth as reflected in European fossil fuel consumption within that same period of time. The near-surface sediments are affected by residues released from fossil fuels at the rate of about 30 g/m**2 yr for the past two decades. The residues have a pronounced effect on the heavy metal and carbon isotope composition of the most Recent sediments allowing estimates to be made for sedimentation, erosion and heavy metal pollution.

(Tables 1-3) Silicon dioxide, Corg and trace element concentrations in sediments of the outer Eckernfoerder Bay, Western Baltic Sea

The main question, posed in the work scheme before laboratory analysis was started, was expressed as follows: Do marked seasonal fluctuations occur in trace element content of the sediment surface, and what are the probable influences of factors such as changing hydrographical parameters, plankton sequence etc. ? Special attention was paid to elements known as pollutants, for example mercury. Within this framework samples have been analysed for their contents of manganese, iron, zinc, lead, and mercury. The amounts of silica and organically-bound carbon serve in most cases as reference values for the trace element content. On sand temporary conditions of increased C org content raise the concentrations of all determined elements. Especially the values reached for mercury in July are worth nothing. It is concluded that Zn, Pb, and Hg tend to enrich with respect to C org as the decomposition of organic matter progresses. On mud-sand flocculation and precipitation of Mn/Fe-hydroxides probably represent an additional concentrating factor for the other elements as the relationship of the results for zinc and manganese shows. Manganese may indicate a seasonally related concentrating cycle at the sediment surface.

Der Eckernförder Spaß: Am 5. April 1849: Mel. Schleswig-Holstein meerumschlungen etc.: 1. Eckernförde hoch! Ihr Brüder! Deutschlands Fahne hat gesiegt, Dänemark, es liegt danieder, und der Doppeladler fliegt! ...

Welsch (Projektbearbeiter): Siegesgedicht anläßlich der Beschießung des am 5. April 1849 in der Bucht von Eckernförde erschienenen dänischen Geschwaders durch deutsche Strandbatterien, wobei das Linienschiff 'Christian VIII.' in Brand geriet und aufgegeben werden mußte und die Fregatte 'Gefion' zur Übergabe gezwungen wurde

(Table 1) Time series of ostracod population density off Bokniseck shore ('Hausgarten'), western Baltic Sea

Seasonal distributions of ostracode species from the Bay of Kiel, western Baltic Sea (Bokniseck, 'Hausgarten') were studied at seven observation stations located between 6 - 23.5 m water depth. During the period from December 1973 to March 1975, 175 samples were taken every two weeks from the sediment surface at each station. Environmental factors were measured simultaneously with sampling. Most of the ostracode species were present in all of the samples throughout the year; four species were found to be seasonal. On the other hand, the population densities of each of the examined ostracode species, as revealed by countings, indicate marked seasonal variations. These variations are attributed to changes in length rate and timing of the reproductive cycles of the different ostracode species, effected mainly by food supply. Maxima in the abundance of the ostracode species with short (1/2 - 1 month) life cycles, occurred simultaneously with peaks of food supply in spring and autumn, whereas the maxima abundance of ostracodes with longer (10 - 12 months) life cycles was delayed.

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.

Understanding the physical processes of pollutant build-up and wash-off on roof surfaces

Pollutants originating with roof runoff can have a significant impact to urban stormwater quality. This signifies the importance of understanding pollutant processes on roof surfaces. Additionally, knowledge of pollutant processes on roof surfaces is important as roofs are used as the primary catchment surface for domestic rainwater harvesting. In recent years, rainwater harvesting has become one of the primary sustainable water management techniques to counteract the growing demand for potable water. Similar to all impervious services, pollutants associated with roof runoff undergo two primary processes: build-up and wash-off. The knowledge relating to these processes is limited. This paper presents outcomes of an in-depth research study into pollutant build-up and wash-off for roof surfaces. The knowledge will be important in order to develop appropriate strategies to safeguard rainwater users from possible health risks.

Bayesian versus frequentist statistical inference for investi gating a one-off cancer cluster reported to a health department

Background The problem of silent multiple comparisons is one of the most difficult statistical problems faced by scientists. It is a particular problem for investigating a one-off cancer cluster reported to a health department because any one of hundreds, or possibly thousands, of neighbourhoods, schools, or workplaces could have reported a cluster, which could have been for any one of several types of cancer or any one of several time periods. Methods This paper contrasts the frequentist approach with a Bayesian approach for dealing with silent multiple comparisons in the context of a one-off cluster reported to a health department. Two published cluster investigations were re-analysed using the Dunn-Sidak method to adjust frequentist p-values and confidence intervals for silent multiple comparisons. Bayesian methods were based on the Gamma distribution. Results Bayesian analysis with non-informative priors produced results similar to the frequentist analysis, and suggested that both clusters represented a statistical excess. In the frequentist framework, the statistical significance of both clusters was extremely sensitive to the number of silent multiple comparisons, which can only ever be a subjective "guesstimate". The Bayesian approach is also subjective: whether there is an apparent statistical excess depends on the specified prior. Conclusion In cluster investigations, the frequentist approach is just as subjective as the Bayesian approach, but the Bayesian approach is less ambitious in that it treats the analysis as a synthesis of data and personal judgements (possibly poor ones), rather than objective reality. Bayesian analysis is (arguably) a useful tool to support complicated decision-making, because it makes the uncertainty associated with silent multiple comparisons explicit.

Final report : offsite manufacture in Australia Final report off-site manufacture in Australia

Off-site Manufacture (OSM) has long been recognised, both in Australia and internationally, as offering numerous benefits to all parties in the construction process. More importantly, it is recognised as a key vehicle for driving improvement within the construction industry. The uptake of OSM in construction is however limited, despite well documented benefits. The research aims to determine the ‘state-of-the-art’ of OSM in Australia. It confirms the benefits and identifies the real and perceived barriers to the widespread adoption of OSM. Further the project identifies opportunities for future investment and research. Although numerous reports have been produced in the UK on the state of OSM adoption within that region, no prominent studies exist for the Australian context. This scoping study is an essential component upon which to build any initiatives that can take advantage of the benefits of OSM in construction. The Construction 2020 report predicted that OSM is set to increase in use over the next 5-15 years, further justifying the need for such a study. The long-term goal of this study is to contribute to the improvement of the Australian construction industry through a realisation of the potential benefits of OSM.

Off-site Manufacture in Australia : Current State and Future Directions

Off-site manufacture (OSM) offers numerous benefits to all parties in the construction process. The uptake of OSM in Australia has, however, been limited. This limited uptake corresponds to similar trends in the UK and US, although the level of OSM there appears to be increasing. This project undertook three workshops — one each in Victoria, Queensland and Western Australia — and 18 interviews with key stakeholders to assist in identifying the general benefits and barriers to OSM uptake in the Australian construction industry. Seven case studies were also undertaken, involving construction projects that used OSM, ranging from civil projects through to residential. Each of these case studies has been analysed to identify what worked and what didn’t, and suggest the lessons to be learned from each project.