Microstructure, magnetic and mechanical properties of Ni-Zn ferrites prepared by Powder Injection Moulding

Nowadays, the electronic industry demands small and complex parts as a consequence of the miniaturization of electronic devices. Powder injection moulding (PIM) is an emerging technique for the manufacturing of magnetic ceramics. In this paper, we analyze the sintering process, between 900 °C and 1300 °C, of Ni–Zn ferrites prepared by PIM. In particular, the densification behaviour, microstructure and mechanical properties of samples with toroidal and bar geometry were analyzed at different temperatures. Additionally, the magnetic behaviour (complex permeability and magnetic losses factor) of these compacts was compared with that of samples prepared by conventional powder compaction. Finally, the mechanical behaviour (elastic modulus, flexure strength and fracture toughness) was analyzed as a function of the powder loading of feedstock. The final microstructure of prepared samples was correlated with the macroscopic behaviour. A good agreement was established between the densities and population of defects found in the materials depending on the sintering conditions. In general, the final mechanical and magnetic properties of PIM samples were enhanced relative those obtained by uniaxial compaction.

Comparative study of auxetic geometrics by means of computer-aided design and engineering

Auxetic materials (or metamaterials) are those with a negative Poisson ratio (NPR) and display the unexpected property of lateral expansion when stretched, as well as an equal and opposing densification when compressed. Such geometries are being progressively employed in the development of novel products, especially in the fields of intelligent expandable actuators, shape morphing structures and minimally invasive implantable devices. Although several auxetic and potentially auxetic geometries have been summarized in previous reviews and research, precise information regarding relevant properties for design tasks is not always provided. In this study we present a comparative study of two-dimensional and three-dimensional auxetic geometries carried out by means of computer-aided design and engineering tools (from now on CAD–CAE). The first part of the study is focused on the development of a CAD library of auxetics. Once the library is developed we simulate the behavior of the different auxetic geometries and elaborate a systematic comparison, considering relevant properties of these geometries, such as Poisson ratio(s), maximum volume or area reductions attainable and equivalent Young's modulus, hoping it may provide useful information for future designs of devices based on these interesting structures.

A molecular dynamics study of swift heavy ion irradiation of amorphous silica: the role of thermal effects

Irradiation with swift heavy ions (SHI), roughly defined as those having atomic masses larger than 15 and energies exceeding 1 MeV/amu, may lead to significant modification of the irradiated material in a nanometric region around the (straight) ion trajectory (latent tracks). In the case of amorphous silica, SHI irradiation originates nano-tracks of higher density than the virgin material (densification). As a result, the refractive index is increased with respect to that of the surroundings. Moreover, track overlapping leads to continuous amorphous layers that present a significant contrast with respect to the pristine substrate. We have recently demonstrated that SHI irradiation produces a large number of point defects, easily detectable by a number of experimental techniques (work presented in the parallel conference ICDIM). The mechanisms of energy transfer from SHI to the target material have their origin in the high electronic excitation induced in the solid. A number of phenomenological approaches have been employed to describe these mechanisms: coulomb explosion, thermal spike, non-radiative exciton decay, bond weakening. However, a detailed microscopic description is missing due to the difficulty of modeling the time evolution of the electronic excitation. In this work we have employed molecular dynamics (MD) calculations to determine whether the irradiation effects are related to the thermal phenomena described by MD (in the ps domain) or to electronic phenomena (sub-ps domain), e.g., exciton localization. We have carried out simulations of up to 100 ps with large boxes (30x30x8 nm3) using a home-modified version of MDCASK that allows us to define a central hot cylinder (ion track) from which heat flows to the surrounding cold bath (unirradiated sample). We observed that once the cylinder has cooled down, the Si and O coordination numbers are 4 and 2, respectively, as in virgin silica. On the other hand, the density of the (cold) cylinder increases with respect to that of silica and, furthermore, the silica network ring size decreases. Both effects are in agreement with the observed densification. In conclusion, purely thermal effects do not explain the generation of point defects upon irradiation, but they do account for the silica densification.

Spatial Estimation of Sub-Hour Global Horizontal Irradiance Based on Official Observations and Remote Sensors.

This study was motivated by the need to improve densification of Global Horizontal Irradiance (GHI) observations, increasing the number of surface weather stations that observe it, using sensors with a sub-hour periodicity and examining the methods of spatial GHI estimation (by interpolation) with that periodicity in other locations. The aim of the present research project is to analyze the goodness of 15-minute GHI spatial estimations for five methods in the territory of Spain (three geo-statistical interpolation methods, one deterministic method and the HelioSat2 method, which is based on satellite images). The research concludes that, when the work area has adequate station density, the best method for estimating GHI every 15 min is Regression Kriging interpolation using GHI estimated from satellite images as one of the input variables. On the contrary, when station density is low, the best method is estimating GHI directly from satellite images. A comparison between the GHI observed by volunteer stations and the estimation model applied concludes that 67% of the volunteer stations analyzed present values within the margin of error (average of +-2 standard deviations).

COST Action Urban Agriculture Europe Training School «Urban agriculture inside the city:alternatives for vacant lots and public space»

The third Training School of the Action took place in Vitoria-Gasteiz (Basque country, Spain) from 24th to 26th September 2014. Vitoria-Gateiz has experimented an important urban outgrowth in the last decade, mainly through the planning and development of two new neighborhoods, Zabalgana and Salburúa, situated at the eastern and western border of the city, by the Greenbelt. These new development are well-equipped and designed according to sustainability principles. Nevertheless, among the main problems they present is their over-dimensioned public space, which creates some areas lacking enough density and mix of uses. On the other hand it is very expensive for the municipality to maintain these public space with the high Vitorian urban standards for public space. The proposed solution for this problem is a strategy of "re-densification" through the insertion of new uses The debate has arisen about which are the most adequate uses to insert in order to get an increasing of urban vitality, specially considering that housing has reached its peak and that Vitoria-Gasteiz is well served with social and sport amenities. The main goal of the TS was to offer an opportunity for the reflection about how urban agriculture might be an optimal alternative for the re-qualifying of this over-dimensioned public space in the new neighbourhoods, especially considering it synergic potential as a tool for production, leisure and landscaping, including the possibility of energy crops within the limits of urban space. Continuity with rural and natural surrounding area through alternatives for urban fringe at the small scale is a relevant issue to be considered as well within the reflection. Taking Zabalgana neighbourhood as a practical field for experiment, the Training School is conceived as a practical and intensive design charrette to be held during a whole day after two days of local knowledge-deepening through field visits and presentations.

Arquitectura Fantasma: Espacio y Producción de Efectos Ambientales

La ciudad es un interior total. Como una nueva naturaleza, el medio urbano tiene tendencia a proliferar indefinidamente y llenar todo el espacio disponible. No sólo está caracterizado por las cualidades atmosféricas de la climatología sino por un rango cada vez mayor de sustancias y fuerzas que forman un vasto océano químico, de energía e información. La arquitectura fantasma que penetra inadvertidamente entre los objetos y ensamblajes presentes en nuestra vida cotidiana es tan importante para la cualificación de nuestro entorno como la arquitectura en sentido tradicional, sólida y visible. En consecuencia, desde el punto de vista de las prácticas materiales ya no es posible situarse en un contexto (social, político, profesional) donde este proceso de densificación ambiental pueda ser ignorado sin más. Vivimos sumergidos en una atmósfera compleja, activa y en gran medida artificial, que de manera voluntaria o involuntaria incorporamos a nuestro organismo, en un proceso en que finalmente sujeto y medio forman un ámbito común. Este es el punto de partida de la presente investigación: a partir de procesos esencialmente arquitectónicos que podemos tildar de ‘encantamientos urbanos’, individuos y objetos comparten una impregnación recíproca, una suerte de erotismo espacial, consistente en la relación a veces inadvertida y agresiva, a veces lúdica y hedonista entre el sujeto y el medio. El objetivo de esta tesis es la construcción de un concepto ampliado y polifacético del ambiente mediante el estudio de los componentes y estímulos físicos que lo caracterizan, los aquí denominados efectos ambientales. Dos elementos fundamentales gravitan inevitablemente en torno a los efectos. Por una parte la estructura, que hace referencia a aquellos objetos o soportes que los producen. Por otra, la afección producida en el sujeto, esto es, las consecuencias emocionales y fisiológicas que comportan su asimilación. La terna resultante, Estructura-Efecto-Afecto, proporcionará un orden conceptual global a la investigación. La tesis está dividida en tres partes. La primera investiga el concepto de efecto ambiental: como figura artística, como detonador de un nuevo paradigma espacial originado en el ámbito de la práctica científica y, finalmente, como categoría estética. La sección intermedia aborda la relación entre estructura y efecto, y se centra en experiencias de diversos ámbitos culturales donde la construcción de determinados artefactos y ensamblajes tiene como único propósito la caracterización del espacio únicamente mediante emisiones ambientales. Finalmente, la tercera parte investiga la arquitectura en busca una materialidad ambiental creciente. Es decir, un espacio donde estructura, atmósfera y psique finalmente convergen. Aquellas estrategias -epistemológicas, teóricas, técnicas- conducentes a la producción de todo tipo de efectos, sean ornamentales, emocionales o fisiológicos, y aquellas prácticas que hacen énfasis en los efectos y no en los objetos de los que proceden serán un importante referente para comprender aquello hoy en día conforma nuestro medio, y contribuirán a concebir la construcción de nuevas formas de habitabilidad. ABSTRACT The city is a total interior. Like a new kind of nature, urban mediums proliferate indefinitely, pervading all available space. Their atmospheric qualities are not only defined by the weather, but by a growing range of substances and forces that form a vast ocean of chemicals, energy and information. The ghost architecture that inadvertently penetrates the objects and assemblages present in our daily lives is as important for the qualification of our environment as traditional, solid and visible architecture. Consequently, there is virtually no context (social, political, professional) where material practices can simply ignore such environmental densification. We live immersed in a complex and—largely artificial—active environment that we voluntarily or involuntarily incorporate to our bodies in a process where ultimately the subject and the environment form a common substance. This is the starting point of our research: through a series of essentially architectural processes that can be called 'urban enchantments,’ individuals and objects come to share a reciprocal impregnation. This spatial erotica consists of the relationship, sometimes unnoticed and violent, sometimes playful and hedonistic, between subject and medium. This research aims at the construction of an expanded and multifaceted idea of environment through the analysis of its quintessential components and physical stimuli, here called ambient effects. Such effects are inevitably accompanied by two key elements. On the one hand there is Structure, which refers to the objects or devices that produce them. On the other hand, the Affect experimented by the subject; namely, the emotional and physiological consequences involved in effect assimilation. The resulting three interlinked concepts, Structure-Effect-Affect, provide the overall conceptual structure of this study. Three main sections are proposed. The first one investigates the concept of ambient effect in different ways: as an artistic figure, as the origin of a new spatial paradigm originated within scientific practices and, finally, as an aesthetic category. The middle section deals with the relationship between structure and effect, and focuses on the construction of certain artifacts and assemblages whose sole purpose is to characterize space by environmental emissions only. Finally, the third part investigates architecture’s quest for ultimate ambiental materiality, that is, a space where structure, atmosphere and psyche finally converge. The strategies, from the epistemological to the technical, leading to the production of all kinds of effects—be they ornamental, emotional or physiological,—and the practices that focus on effects and not the objects from where they come, will be studied. All of them will open new windows to a contemporary notion of environment and will contribute to the construction of new living habitats.

Desarrollo, implementación y análisis de un modelo cinemático local de velocidades para Costa Rica basado en la integración y homogenización de datos de estaciones GNSS continuas

El primer procesamiento estricto realizado con el software científico Bernese y contemplando las más estrictas normas de cálculo recomendadas internacionalmente, permitió obtener un campo puntual de alta exactitud, basado en la integración y estandarización de los datos de una red GPS ubicada en Costa Rica. Este procesamiento contempló un total de 119 semanas de datos diarios, es decir unos 2,3 años, desde enero del año 2009 hasta abril del año 2011, para un total de 30 estaciones GPS, de las cuales 22 están ubicadas en el territorio nacional de Costa Rica y 8 internaciones pertenecientes a la red del Sistema Geocéntrico para las Américas (SIRGAS). Las denominadas soluciones semilibres generaron, semana a semana, una red GPS con una alta exactitud interna definida por medio de los vectores entre las estaciones y las coordenadas finales de la constelación satelital. La evaluación semanal dada por la repetibilidad de las soluciones brindó en promedio errores de 1,7 mm, 1,4 mm y 5,1 mm en las componentes [n e u], confirmando una alta consistencia en estas soluciones. Aunque las soluciones semilibres poseen una alta exactitud interna, las mismas no son utilizables para fines de análisis cinemático, pues carecen de un marco de referencia. En Latinoamérica, la densificación del Marco Internacional Terrestre de Referencia (ITRF), está representado por la red de estaciones de operación continua GNSS de SIRGAS, denominada como SIRGAS-CON. Por medio de las denominadas coordenadas semanales finales de las 8 estaciones consideradas como vínculo, se refirió cada una de las 119 soluciones al marco SIRGAS. La introducción del marco de referencia SIRGAS a las soluciones semilibres produce deformaciones en estas soluciones. Las deformaciones de las soluciones semilibres son producto de las cinemática de cada una de las placas en las que se ubican las estaciones de vínculo. Luego de efectuado el amarre semanal a las coordenadas SIRGAS, se hizo una estimación de los vectores de velocidad de cada una de las estaciones, incluyendo las de amarre, cuyos valores de velocidad se conocen con una alta exactitud. Para la determinación de las velocidades de las estaciones costarricenses, se programó una rutina en ambiente MatLab, basada en una ajuste por mínimos cuadrados. Los valores obtenidos en el marco de este proyecto en comparación con los valores oficiales, brindaron diferencias promedio del orden de los 0,06 cm/a, -0,08 cm/a y -0,10 cm/a respectivamente para las coordenadas [X Y Z]. De esta manera se logró determinar las coordenadas geocéntricas [X Y Z]T y sus variaciones temporales [vX vY vZ]T para el conjunto de 22 estaciones GPS de Costa Rica, dentro del datum IGS05, época de referencia 2010,5. Aunque se logró una alta exactitud en los vectores de coordenadas geocéntricas de las 22 estaciones, para algunas de las estaciones el cálculo de las velocidades no fue representativo debido al relativo corto tiempo (menos de un año) de archivos de datos. Bajo esta premisa, se excluyeron las ocho estaciones ubicadas al sur de país. Esto implicó hacer una estimación del campo local de velocidades con solamente veinte estaciones nacionales más tres estaciones en Panamá y una en Nicaragua. El algoritmo usado fue el denominado Colocación por Mínimos Cuadrados, el cual permite la estimación o interpolación de datos a partir de datos efectivamente conocidos, el cual fue programado mediante una rutina en ambiente MatLab. El campo resultante se estimó con una resolución de 30' X 30' y es altamente constante, con una velocidad resultante promedio de 2,58 cm/a en una dirección de 40,8° en dirección noreste. Este campo fue validado con base en los datos del modelo VEMOS2009, recomendado por SIRGAS. Las diferencias de velocidad promedio para las estaciones usadas como insumo para el cálculo del campo fueron del orden los +0,63 cm/a y +0,22 cm/a para los valores de velocidad en latitud y longitud, lo que supone una buena determinación de los valores de velocidad y de la estimación de la función de covarianza empírica, necesaria para la aplicación del método de colocación. Además, la grilla usada como base para la interpolación brindó diferencias del orden de -0,62 cm/a y -0,12 cm/a para latitud y longitud. Adicionalmente los resultados de este trabajo fueron usados como insumo para hacer una aproximación en la definición del límite del llamado Bloque de Panamá dentro del territorio nacional de Costa Rica. El cálculo de las componentes del Polo de Euler por medio de una rutina programa en ambiente MatLab y aplicado a diferentes combinaciones de puntos no brindó mayores aportes a la definición física de este límite. La estrategia lo que confirmó fue simplemente la diferencia en la dirección de todos los vectores velocidad y no permitió reveló revelar con mayor detalle una ubicación de esta zona dentro del territorio nacional de Costa Rica. ABSTRACT The first strict processing performed with the Bernese scientific software and contemplating the highest standards internationally recommended calculation, yielded a precise field of high accuracy, based on the integration and standardization of data from a GPS network located in Costa Rica. This processing watched a total of 119 weeks of daily data, is about 2.3 years from January 2009 to April 2011, for a total of 30 GPS stations, of which 22 are located in the country of Costa Rica and 8 hospitalizations within the network of Geocentric System for the Americas (SIRGAS). The semi-free solutions generated, every week a GPS network with high internal accuracy defined by vectors between stations and the final coordinates of the satellite constellation. The weekly evaluation given by repeatability of the solutions provided in average errors of 1.7 mm 1.4 mm and 5.1 mm in the components [n e u], confirming a high consistency in these solutions. Although semi-free solutions have a high internal accuracy, they are not used for purposes of kinematic analysis, because they lack a reference frame. In Latin America, the densification of the International Terrestrial Reference Frame (ITRF), is represented by a network of continuously operating GNSS stations SIRGAS, known as SIRGAS-CON. Through weekly final coordinates of the 8 stations considered as a link, described each of the solutions to the frame 119 SIRGAS. The introduction of the frame SIRGAS to semi-free solutions generates deformations. The deformations of the semi-free solutions are products of the kinematics of each of the plates in which link stations are located. After SIRGAS weekly link to SIRGAS frame, an estimate of the velocity vectors of each of the stations was done. The velocity vectors for each SIRGAS stations are known with high accuracy. For this calculation routine in MatLab environment, based on a least squares fit was scheduled. The values obtained compared to the official values, gave average differences of the order of 0.06 cm/yr, -0.08 cm/yr and -0.10 cm/yr respectively for the coordinates [XYZ]. Thus was possible to determine the geocentric coordinates [XYZ]T and its temporal variations [vX vY vZ]T for the set of 22 GPS stations of Costa Rica, within IGS05 datum, reference epoch 2010.5. The high accuracy vector for geocentric coordinates was obtained, however for some stations the velocity vectors was not representative because of the relatively short time (less than one year) of data files. Under this premise, the eight stations located in the south of the country were excluded. This involved an estimate of the local velocity field with only twenty national stations plus three stations in Panama and Nicaragua. The algorithm used was Least Squares Collocation, which allows the estimation and interpolation of data from known data effectively. The algorithm was programmed with MatLab. The resulting field was estimated with a resolution of 30' X 30' and is highly consistent with a resulting average speed of 2.58 cm/y in a direction of 40.8° to the northeast. This field was validated based on the model data VEMOS2009 recommended by SIRGAS. The differences in average velocity for the stations used as input for the calculation of the field were of the order of +0.63 cm/yr, +0.22 cm/yr for the velocity values in latitude and longitude, which is a good determination velocity values and estimating the empirical covariance function necessary for implementing the method of application. Furthermore, the grid used as the basis for interpolation provided differences of about -0.62 cm/yr, -0.12 cm/yr to latitude and longitude. Additionally, the results of this investigation were used as input to an approach in defining the boundary of Panama called block within the country of Costa Rica. The calculation of the components of the Euler pole through a routine program in MatLab and applied to different combinations of points gave no further contributions to the physical definition of this limit. The strategy was simply confirming the difference in the direction of all the velocity vectors and not allowed to reveal more detail revealed a location of this area within the country of Costa Rica.

Deep reactive ion etching of auxetic structures: present capabilities and challenges

Auxetic materials (or metamaterials) have negative Poisson ratios (NPR) and display the unexpected properties of lateral expansion when stretched, and equal and opposing densification when compressed. Such auxetic materials are being used more frequently in the development of novel products, especially in the fields of intelligent expandable actuators, shape-morphing structures, and minimally invasive implantable devices. Although several micromanufacturing technologies have already been applied to the development of auxetic materials and devices, additional precision is needed to take full advantage of their special mechanical properties. In this study, we present a very promising approach for the development of auxetic materials and devices based on the use of deep reactive ion etching (DRIE). The process stands out for its precision and its potential applications to mass production. To our knowledge, it represents the first time this technology has been applied to the manufacture of auxetic materials with nanometric details. We take into account the present capabilities and challenges linked to the use of DRIE in the development of auxetic materials and auxetic-based devices.

Polymer interaction with macroscopic carbon nanotube fibres and fabrication of nanostructured composites

El ensamblado de nanotubos de carbono (CNT) como una fibra macroscópica en la cual están orientados preferentemente paralelos entre sí y al eje de la fibra, ha dado como resultado un nuevo tipo de fibra de altas prestaciones derivadas de la explotación eficiente de las propiedades axiales de los CNTs, y que tiene un gran número de aplicaciones potenciales. Fibras continuas de CNTs se produjeron en el Instituto IMDEA Materiales mediante el proceso de hilado directo durante la reacción de síntesis por deposición química de vapores. Uno de los objetivos de esta tesis es el estudio de la estructura de estas fibras mediante técnicas del estado del arte de difracción de rayos X de sincrotrón y la elaboración de un modelo estructural de dicho material. Mediciones texturales de adsorción de gases, análisis de micrografías de electrones y dispersión de rayos X de ángulo alto y bajo (WAXS/SAXS) indican que el material tiene una estructura mesoporosa con una distribución de tamaño de poros ancha derivada del amplio rango de separaciones entre manojos de CNTs, así como una superficie específica de 170m2/g. Los valores de dimensión fractal obtenidos mediante SAXS y análisis Barrett-Joyner-Halenda (BJH) de mediciones texturales coinciden en 2.4 y 2.5, respectivamente, resaltando el carácter de red de la estructura de dichas fibras. La estructura mesoporosa y tipo hilo de las fibra de CNT es accesible a la infiltración de moléculas externas (líquidos o polímeros). En este trabajo se estudian los cambios en la estructura multiescala de las fibras de CNTs al interactuar con líquidos y polímeros. Los efectos de la densificación en la estructura de fibras secas de CNT son estudiados mediante WAXS/SAXS. El tratamiento de densificación junta los manojos de la fibra (los poros disminuyen de tamaño), resultando en un incremento de la densidad de la fibra. Sin embargo, los dominios estructurales correspondientes a la transferencia de esfuerzo mecánica y carga eléctrica en los nanotubos no son afectados durante este proceso de densificación; como consecuencia no se produce un efecto sustancial en las propiedades mecánicas y eléctricas. Mediciones de SAXS and fibra de CNT antes y después de infiltración de líquidos confirman la penetración de una gran cantidad de líquidos que llena los poros internos de la fibra pero no se intercalan entre capas de nanotubos adyacentes. La infiltración de cadenas poliméricas de bajo peso molecular tiende a expandir los manojos en la fibra e incrementar el ángulo de apertura de los poros. Los resultados de SAXS indican que la estructura interna de la fibra en términos de la organización de las capas de tubos y su orientación no es afectada cuando las muestras consisten en fibras infiltradas con polímeros de alto peso molecular. La cristalización de varios polímeros semicristalinos es acelerada por la presencia de fibras de CNTs alineados y produce el crecimiento de una capa transcristalina normal a la superficie de la fibra. Esto es observado directamente mediante microscopía óptica polarizada, y detectado mediante calorimetría DSC. Las lamelas en la capa transcristalina tienen orientación de la cadena polimérica paralela a la fibra y por lo tanto a los nanotubos, de acuerdo con los patrones de WAXS. Esta orientación preferencial se sugiere como parte de la fuerza impulsora en la nucleación. La nucleación del dominio cristalino polimérico en la superficie de los CNT no es epitaxial. Ocurre sin haber correspondencia entre las estructuras cristalinas del polímero y los nanotubos. Estas observaciones contribuyen a la compresión del fenómeno de nucleación en CNTs y otros nanocarbonos, y sientan las bases para el desarrollo de composites poliméricos de gran escala basados en fibra larga de CNTs alineados. ABSTRACT The assembly of carbon nanotubes into a macroscopic fibre material where they are preferentially aligned parallel to each other and to the fibre axis has resulted in a new class of high-performance fibres, which efficiently exploits the axial properties of the building blocks and has numerous applications. Long, continuous CNT fibres were produced in IMDEA Materials Institute by direct fibre spinning from a chemical vapour deposition reaction. These fibres have a complex hierarchical structure covering multiple length scales. One objective of this thesis is to reveal this structure by means of state-of-the-art techniques such as synchrotron X-ray diffraction, and to build a model to link the fibre structural elements. Texture and gas absorption measurements, using electron microscopy, wide angle and small angle X-ray scattering (WAXS/SAXS), and pore size distribution analysis by Barrett-Joyner-Halenda (BJH), indicate that the material has a mesoporous structure with a wide pore size distribution arising from the range of fibre bundle separation, and a high surface area _170m2/g. Fractal dimension values of 2.4_2.5 obtained from the SAXS and BJH measurements highlight the network structure of the fibre. Mesoporous and yarn-like structure of CNT fibres make them accessible to the infiltration of foreign molecules (liquid or polymer). This work studies multiscale structural changes when CNT fibres interact with liquids and polymers. The effects of densification on the structure of dry CNT fibres were measured by WAXS/SAXS. The densification treatment brings the fibre bundles closer (pores become smaller), leading to an increase in fibre density. However, structural domains made of the load and charge carrying nanotubes are not affected; consequently, it has no substantial effect on mechanical and electrical properties. SAXS measurements on the CNT fibres before and after liquid infiltration imply that most liquids are able to fill the internal pores but not to intercalate between nanotubes. Successful infiltration of low molecular weight polymer chains tends to expand the fibre bundles and increases the pore-opening angle. SAXS results indicate that the inner structure of the fibre, in terms of the nanotube layer arrangement and the fibre alignment, are not largely affected when infiltrated with polymers of relatively high molecular weight. The crystallisation of a variety of semicrystalline polymers is accelerated by the presence of aligned fibres of CNTs and results in the growth of a transcrystalline layer perpendicular to the fibre surface. This can be observed directly under polarised optical microscope, and detected by the exothermic peaks during differential scanning calorimetry. The discussion on the driving forces for the enhanced nucleation points out the preferential chain orientation of polymer lamella with the chain axis parallel to the fibre and thus to the nanotubes, which is confirmed by two-dimensional WAXS patterns. A non-epitaxial polymer crystal growth habit at the CNT-polymer interface is proposed, which is independent of lattice matching between the polymer and nanotubes. These findings contribute to the discussion on polymer nucleation on CNTs and other nanocarbons, and their implication for the development of large polymer composites based on long and aligned fibres of CNTs.

A proposal for pellet production from residual woody biomass in the island of Majorca (Spain)

The use of residual biomass for energy purposes is of great interest in isolated areas like Majorca for waste reduction, energy sufficiency and renewable energies development. In addition, densification processes lead to easy-to-automate solid biofuels which additionally have higher energy density. The present study aims at (i) the estimation of the potential of residual biomass from woody crops as well as from agri-food and wood industries in Majorca, and (ii) the analysis of the optimal location of potential pellet plants by means of a GIS approach (location-allocation analysis) and a cost evaluation of the pellets production chain. The residual biomass potential from woody crops in Majorca Island was estimated at 35,874 metric tons dry matter (t DM) per year, while the wood and agri-food industries produced annually 21,494 t DM and 2717 t DM, respectively. Thus, there would be enough resource available for the installation of 10 pellet plants of 6400 t·year−1 capacity. These plants were optimally located throughout the island of Mallorca with a maximum threshold distance of 28 km for biomass transport from the production points. Values found for the biomass cost at the pellet plant ranged between 57.1 €·t−1 and 63.4 €·t−1 for biomass transport distance of 10 and 28 km. The cost of pelleting amounted to 56.7 €·t−1; adding the concepts of business fee, pellet transport and profit margin (15%), the total cost of pelleting was estimated at 116.6 €·t−1. The present study provides a proposal for pellet production from residual woody biomass that would supply up to 2.8% of the primary energy consumed by the domestic and services sector in the Balearic Islands.

La Ordenación del Territorio en las Ciudades Globales Europeas: El caso de Madrid

En la Comunidad de Madrid el modelo de ocupación del territorio en las dos últimas décadas ha obedecido a factores de oferta del mercado y no a las necesidades de la población, ello provoca un consumo de suelo y de recursos que conducen a una sobrexplotación insostenible. Las metrópolis globales están experimentando rápidas e intensas transformaciones, basadas en los paradigmas emergentes de la globalización, la gobernanza, la metropolizacion y la dispersión de las actividades en el territorio y a través de ellos se abordan los planes de Londres, París y las tentativas de Madrid. La globalización provoca la pérdida de soberanía de las administraciones publicas y la competitividad entre las ciudades globales en Europa, Londres, Paris y Madrid, son centros de poder, de concentración y crecimiento donde se produce la dualización del espacio y donde la desigualdad participa de la restructuración urbana, concentración de pobreza frente a espacios de la nueva clase emergente en donde dominan los sectores de servicios y las tecnologías de la información. Frente al desarrollo urbano neoliberal de regulación a través del mercado y basada en criterios de eficiencia de la Nueva Gestión Pública, se vislumbra la posibilidad de que la sociedad se administre a si misma por medio de acciones voluntarias y responsables que promuevan los intereses colectivos mediante el reconocimiento de su propia identidad, introduciendo el concepto de gobernanza. Frente, a la explotación del territorio por parte de la sociedad extractiva que genera corrupcion, se propone un modelo de cooperación público-privada basado en la confianza mutua, un marco regulador estable, la transparencia y la información a cuyo flujo más homogéneo contribuirán sin duda las TICs. En todo este proceso, las regiones metropolitanas en Europa se erigen como motores del crecimiento, donde los límites administrativos son superados, en un territorio cada vez más extendido y donde los gobiernos locales tienen que organizarse mediante un proceso de cooperación en la provisión de servicios que ayuden a evitar los desequilibrios territoriales. El fenómeno de la dispersión urbana en desarrollos de baja densidad, los centros comerciales periféricos, la expulsión hacia la periferia de las actividades de menor valor añadido y la concentración de funciones directivas en el centro, conducen a una fragmentación del territorio en islas dependientes del automóvil y a procesos de exclusión social por la huida de las rentas altas y la expulsión de las rentas bajas de los centros urbanos. Se crean fragmentos monofuncionales y discontinuos, apoyados en las autovías, lugares carentes de identidad y generadores de despilfarro de recursos y una falta de sostenibilidad ambiental, económica y social. El estudio de la cultura de la planificación en Europa ayuda a comprender los diferentes enfoques en la ordenación del territorio y el proceso de convergencia entre las diferentes regiones. Los documentos de la UE se basan en la necesidad de la competitividad para el crecimiento europeo y la cohesión social y en relación al territorio en los desarrollos policéntricos, la resolución del dualismo campo-ciudad, el acceso equilibrado a las infraestructuras, la gestión prudente de la naturaleza, el patrimonio y el fomento de la identidad. Se proponen dos niveles de estudio uno actual, los últimos planes de Londres y Paris y el otro la evolución de las tentativas de planes en la Región madrileña siempre en relación a los paradigmas emergentes señalados y su reflejo en los documentos. El Plan de Londres es estratégico, con una visión a largo plazo, donde se confiere un gran interés al proceso, al papel del alcalde como líder y su adaptación a las circunstancias cambiantes, sujeto a las incertidumbres de una ciudad global. El desarrollo del mismo se concibe a través de la colaboración y cooperación entre las administraciones y actores. La estructura del documento es flexible, establece orientaciones y guías indicativas, para la redacción de los planes locales, no siendo las mismas vinculantes y con escasa representación grafica. El Plan de París es más un plan físico, similar al de otros centros europeos, trabaja sobre los sectores y sobre los territorios, con información extensa, con características de “Plan Latino” por la fuerza de la expresión gráfica, pero al mismo tiempo contiene una visión estratégica. Es vinculante en sus determinaciones y normativas, se plantea fomentar, pero también prohibir. Ambos planes tratan la competitividad internacional de sus centros urbanos, la igualdad social, la inclusión de todos los grupos sociales y la vivienda como una cuestión de dignidad humana. Londres plantea la gobernanza como cooperación entre sector público-privado y la necesaria cooperación con las regiones limítrofes, en París las relaciones están más institucionalizadas resaltando la colaboración vertical entre administraciones. Ambos plantean la densificación de nodos servidos por transporte público, modos blandos y el uso los TODs y la preservación de la infraestructura verde jerarquizada, la potenciación de la red azul y la mejora del paisaje de las periferias. En las “tentativas” de planes territoriales de Madrid se constata que estuvieron sujetas a los ciclos económicos. El primer Documento las DOT del año 1984, no planteaba crecimiento, ni económico ni demográfico, a medio plazo y por ello no proponía una modificación del modelo radio concéntrico. Se trataba de un Plan rígido volcado en la recuperación del medio rural, de la ciudad, el dimensionamiento de los crecimientos en función de las dotaciones e infraestructuras existentes. Aboga por la intervención de la administración pública y la promoción del pequeño comercio. Destaca el desequilibrio social en función de la renta, la marginación de determinados grupos sociales, el desequilibrio residencia/empleo y la excesiva densidad. Incide en la necesidad de viviendas para los más desfavorecidos mediante el alquiler, la promoción suelo público y la promoción del ferrocarril para dar accesibilidad al espacio central. Aboga por el equipamiento de proximidad y de pequeño tamaño, el tratamiento paisajístico de los límites urbanos de los núcleos y el control de las actividades ilegales señalando orientaciones para el planeamiento urbano. Las Estrategias (1989) contienen una visión: la modificación del modelo territorial, mediante la intervención pública a través de proyectos. Plantea la reestructuración económica del territorio, la reconversión del aparato productivo, la deslocalización de actividades de escaso valor añadido y una mayor ubicuidad de la actividad económica. Incide en la difusión de la centralidad hacia el territorio del sur, equilibrándolo con el norte, tratando de recomponer empleo y residencia, integrando al desarrollo económico las periferias entre sí y con el centro. Las actuaciones de transporte consolidarían las actuaciones, modificando el modelo radio concéntrico facilitando la movilidad mediante la red de cercanías y la intermodalidad. El plan se basaba en el liderazgo del Consejero, no integrando sectores como el medio ambiente, ni estableciendo un documento de seguimiento de las actuaciones que evaluara los efectos de las políticas y su aportación al equilibrio territorial, a través de los proyectos realizados. El Documento Preparatorio de las Bases (1995), es más de un compendio o plan de planes, recoge análisis y propuestas de los documentos anteriores y de planes sectoriales de otros departamentos. Presenta una doble estructura: un plan físico integrador clásico, que abarca los sectores y territorios, y recoge las Estrategias previas añadiendo puntos fuertes, como el malestar urbano y la rehabilitación el centro. Plantea la consecución del equilibrio ambiental mediante el crecimiento de las ciudades existentes, la vertebración territorial basada en la movilidad y en la potenciación de nuevas centralidades, la mejora de la habitabilidad y rehabilitación integral del Centro Urbano de Madrid, y la modernización del tejido productivo existente. No existe una idea-fuerza que aglutine todo el documento, parte del reconocimiento de un modelo existente concentrado y congestivo, un centro urbano dual y dos periferias al este y sur con un declive urbano y obsolescencia productiva y al oeste y norte con una dispersión que amenaza al equilibrio medioambiental. Señala como aspectos relevantes, la creciente polarización y segregación social, la deslocalización industrial, la aparición de las actividades de servicios a las empresas instaladas en las áreas metropolitanas, y la dispersión de las actividades económicas en el territorio por la banalización del uso del automóvil. Se plantea el reto de hacer ciudad de la extensión suburbana y su conexión con el sistema metropolitano, mediante una red de ciudades integrada y complementaria, en búsqueda de un mayor equilibrio y solidaridad territorial. Las Bases del PRET (1997) tenían como propósito iniciar el proceso de concertación en que debe basarse la elaboración del Plan. Parte de la ciudad mediterránea compacta, y diversa, y de la necesidad de que las actividades económicas, los servicios y la residencia estén en proximidad, resolviéndolo mediante una potente red de transporte público que permitiese una accesibilidad integrada al territorio. El flujo de residencia hacia la periferia, con un modelo ajeno de vivienda unifamiliar y la concentración del empleo en el centro producen desequilibrio territorial. Madrid manifiesta siempre apostó por la densificación del espacio central urbanizado, produciendo su congestión, frente al desarrollo de nuevos suelos que permitieran su expansión territorial. Precisa que es necesario preservar los valores de centralidad de Madrid, como generador de riqueza, canalizando toda aquella demanda de centralidad, hacia espacios más periféricos. El problema de la vivienda no lo ve solo como social, sino como económico, debido a la pérdida de empleos que supone su paralización. Observa ya los crecimientos residenciales en el borde de la region por el menor valor del suelo. Plantea como la política de oferta ha dado lugar a un modelo de crecimiento fragmentado, desequilibrado, desestructurado, con fuertes déficits dotacionales y de equipamiento, que inciden en la segregación espacial de las rentas, agravando el proceso de falta de identidad morfológica y de desarraigo de los valores urbanos. El plan señalaba que la presión sobre el territorio creaba su densificación por las limitaciones de espacio, Incidía en limitar el peso de la intervención pública, no planteando propuestas de cooperación público-privado. La mayor incoherencia estriba en que los objetivos eran innovadores y coinciden en su mayoría con las propuestas estudiadas de Londres o Paris, pero se intentan implementar a través de un cambio hacia un modelo reticulado homogéneo, expansivo sobre el territorio, que supone un consumo de suelo y de infraestructuras para solucionar un problema inexistente, la gestión de la densidad. Durante las dos últimas décadas en ausencia de un plan regional, la postura neoliberal fue la de un exclusivo control de legalidad del planeamiento, los municipios entraron en un proceso de competencia para aprovechar las iniciales ventajas económicas de los crecimientos detectados, que proporcionaban una base económica “sólida” a unos municipios con escasos recursos en sus presupuestos municipales. La legislación se modifica a requerimiento de grupos interesados, no existiendo un marco estable. Se pierde la figura del plan no solo a nivel regional, si no en los sectores y el planeamiento municipal donde los municipios tiende a basarse en modificaciones puntuales con la subsiguiente pérdida del modelo urbanístico. La protección ambiental se estructura mediante un extenso nivel de figuras, con diversidad de competencias que impide su efectiva protección y control. Este proceso produce un despilfarro en la ocupación del suelo, apoyada en las infraestructuras viarias, y un crecimiento disperso y de baja densidad, cada vez más periférico, produciéndose una segmentación social por dualización del espacio en función de niveles de renta. Al amparo del boom inmobiliario, se produce una falta de política social de vivienda pública, más basada en la dinamización del mercado con producción de viviendas para rentas medias que en políticas de alquiler para determinados grupos concentrándose estas en los barrios desfavorecidos y en la periferia sur. Se produce un incremento de la vivienda unifamiliar, muchas veces amparada en políticas públicas, la misma se localiza en el oeste principalmente, en espacios de valor como el entorno del Guadarrama o con viviendas más baratas por la popularización de la tipología en la frontera de la Región. El territorio se especializa a modo de islas monofuncionales, las actividades financieras y de servicios avanzados a las empresas se localizan en el norte y oeste próximo, se pierde actividad industrial que se dispersa más al sur, muchas veces fuera de la región. Se incrementan los grandes centros comerciales colgados de las autovías y sin población en su entorno. Todo este proceso ha provocado una pérdida de utilización del transporte público y un aumento significativo del uso del vehículo privado. En la dos últimas décadas se ha producido en la región de Madrid desequilibrio territorial y segmentación social, falta de implicación de la sociedad en el territorio, dispersión del crecimiento y un incremento de los costes ambientales, sociales y económicos, situación, que solo, a través del uso racional del territorio se puede reconducir, apoyado en una planificación integrada sensible y participativa. ABSTRACT In Madrid the model of land occupation in the past two decades has been driven by market supply factors rather than the needs of the population. This results in a consumption of land and resources that leads to unsustainable overexploitation. Addressing this issue must be done through sensitive and participatory integrated planning. Global cities are experiencing rapid and intense change based on the emerging paradigms of globalization, governance, metropolization and the dispersion of activities in the territory. Through this context, a closer look will be taken at the London and Paris plans as well as the tentative plans of Madrid. Globalization causes the loss of state sovereignty and the competitiveness among global cities in Europe; London, Paris and Madrid. These are centres of power, concentration and growth where the duality of space is produced, and where inequality plays a part in urban restructuration. There are concentrated areas of poverty versus areas with a new emerging class where the services sector and information technologies are dominant. The introduction of ICTs contributes to a more homogeneous flow of information leading, us to the concept of governance. Against neoliberal urban development based on free market regulations and efficiency criteria as established by the “New Public Management”, emerge new ways where society administers itself through voluntary and responsible actions to promote collective interests by recognizing their own identity. A new model of public-private partnerships surfaces that is based on mutual trust, transparency, information and a stable regulatory framework in light of territorial exploitation by the “extractive society” that generates corruption. Throughout this process, European metropolitan regions become motors of growth where administrative boundaries are overcome in an ever expanding territory where government is organized through cooperative processes to provide services that protect against regional imbalances. Urban sprawl or low-density development as seen in peripheral shopping centres, the off-shoring of low added-value activities to the periphery, and the concentration of business and top management functions in the centre, leads to a fragmentation of the territory in automobile dependent islands and a process of social exclusion brought on by the disappearance of high incomes. Another effect is the elimination of low income populations from urban centres. In consequence, discontinuous expansions and mono-functional places that lack identity materialize supported by a highway network and high resource consumption. Studying the culture of urban planning in Europe provides better insight into different approaches to spatial planning and the process of convergence between different regions. EU documents are based on the need of competitiveness for European growth and social cohesion. In relation to polycentric development territory they are based on a necessity to solve the dualism between field and city, balanced access to infrastructures, prudent management of nature and solidifying heritage and identity Two levels of study unfold, the first being the current plans of London and Île-de-France and the second being the evolution of tentative plans for the Madrid region as related to emerging paradigms and how this is reflected in documents. The London Plan is strategic with a long-term vision that focuses on operation, the role of the mayor as a pivotal leader, and the adaptability to changing circumstances brought on by the uncertainties of a global city. Its development is conceived through collaboration and cooperation between governments and stakeholders. The document structure is flexible, providing guidance and indicative guidelines on how to draft local plans so they are not binding, and it contains scarce graphic representation. The Plan of Paris takes on a more physical form and is similar to plans of other European centres. It emphasizes sectors and territories, using extensive information, and is more characteristic of a “Latin Plan” as seen in its detailed graphic expression. However, it also contains a strategic vision. Binding in its determinations and policy, it proposes advancement but also prohibition. Both plans address the international competitiveness of urban centres, social equality, inclusion of all social groups and housing as issues of human dignity. London raises governance and cooperation between public and private sector and the need for cooperation with neighbouring regions. In Paris, the relations are more institutionalized highlighting vertical collaboration between administrations. Both propose nodes of densification served by public transportation, soft modes and the use of TOD, the preservation of a hierarchical green infrastructure, and enhancing the landscape in urban peripheries. The tentative territorial plans for the Madrid region provide evidence that they were subject to economic cycles. The first document of master guidelines (1984) does not address either economic or demographic growth in the mid term and therefore does not propose the modification of the radio-concentric model. It is a rigid plan focused on rural and urban recovery and the dimensioning of growth that depends on endowments and infrastructures. It advocates government intervention and promotes small business. The plan emphasizes social imbalance in terms of income, marginalization of certain social groups, the imbalance of residence/employment and excessive density. It stresses the need for social rent housing for the underprivileged, promotes public land, and the supports rail accessibility to the central area. It backs facilities of proximity and small size, enhancing the landscaping of city borders, controlling illegal activities and draws out guidelines for urban planning. The strategies (1989) contain a vision: Changing the territorial model through public intervention by means of projects. They bring to light economic restructuring of territory, the reconversion of the productive apparatus, relocation of low value-added activities, and greater ubiquity of economic activity. They also propose the diffusion of centrality towards southern territories, balancing it with the north in an attempt to reset employment and residence that integrates peripheral economic development both in the periphery and the centre. Transport would consolidate the project, changing the radius-concentric model and facilitating mobility through a commuter and inter-modality network. The plan derives itself from the leadership of the minister and does not integrate sectors such as environment. It also does not incorporate the existence of a written document that monitors performance to evaluate the effects of policies and their contribution to the territorial balance. The Preparatory Document of the Bases, (1995) is more a compendium, or plan of plans, that compiles analysis and proposals from previous documents and sectorial plans from other departments. It has a dual structure: An integrating physical plan covering the sectors and territories that includes the previous strategies while adding some strengths. One such point is the urban discomfort and the rehabilitation of the centre. It also poses the achievement of environmental balance through the growth of existing cities, the territorial linking based on mobility, strengthening new centres, improving the liveability and comprehensive rehabilitation of downtown Madrid, and the modernization of the existing production network. There is no one powerful idea that binds this document. This is due to the recognition of an existing concentrate and congestive model, a dual urban centre, two eastern and southern suburbs suffering from urban decay, and an obsolescent productive north and west whose dispersion threatens the environmental balance. Relevant aspects the document highlights are increasing polarization and social segregation, industrial relocation, the emergence of service activities to centralized companies in metropolitan areas and the dispersion of economic activities in the territory by the trivialization of car use. It proposes making the city from the suburban sprawl and its connection to the metropolitan system through a network of integrated and complementary cities in search of a better balance and territorial solidarity. The Bases of PRET (1997) aims to start the consultation process that must underpin the development of the plan. It stems from a compact and diverse Mediterranean city along with the need for economic activities, services and residences that are close. To resolve the issue, it presents a powerful network of public transport that allows integrated accessibility to the territory. The flow of residence to the periphery based on a foreign model of detached housing and an employment concentration in the centre produces territorial imbalance. Madrid always opted for the densification of the central space, producing its congestion, against the development of new land that would allow its territorial expansion. The document states that the necessity to preserve the values of the housing problem is not only viewed as social, but also economic due to the loss of jobs resulting from their paralysis. It notes the residential growth in the regional border due to the low price of land and argues that the policy of supply has led to a fragmented model of growth that is unbalanced, unstructured, with strong infrastructure and facility deficits that affect the spatial segregation of income and aggravate the lack of morphological identity, uprooting urban values. The pressure on the territory caused its densification due to space limitation; the proposed grid model causes land consumption and infrastructure to solve a non-problem, density. Focusing on limiting the weight of public intervention, it does not raise proposals for public-private cooperation. The biggest discrepancy is that the targets were innovative and mostly align with the proposals in London and Paris. However, it proposes to be implemented through a shift towards a uniform gridded model that is expansive over territory. During the last two decades, due to the absence of a regional plan, a neoliberal stance held exclusive control of the legality of urban planning. The municipalities entered a competition process to take advantage of initial economic benefits of such growth. This provided a “solid” economic base for some municipalities with limited resources in their municipal budgets. The law was amended without a legal stable framework at the request of stakeholders. The character of the plan is lost not only regionally, but also in the sectors and municipal planning. This tends to be based on specific changes with the loss of an urban model. Environmental protection is organized through an extensive number of protection figures with diverse competencies that prevent its effective protection. This process squanders the use of the land, backed by increasing road infrastructure, dispersed occupations with low-density growth causing a social segmentation due to space duality based on income levels. During the housing boom, there is a reduction in social public housing policy mostly due to a boost in the market of housing production for average incomes than in rental policies for needy social groups that focus on disadvantaged neighbourhoods and southern suburbs. As a result, there is an increase in single-family housing, often protected by public policy. This is located primarily in the west in areas of high environmental value such as Guadarrama. There is also cheaper housing due to the popularization of typology in the border region. There, territory works as a mono-functional islands. Financial activities and advanced services for companies are located to the north and west where industrial activity is lost as it migrates south, often outside the region. The number of large shopping centres hanging off the highway infrastructure with little to no surrounding population increases. This process leads to the loss of dependency on public transport and a significant increase in the use of private vehicles. The absence of regional planning has produced more imbalance, more social segmentation, more dispersed growth and a lot of environmental, social and economic costs that can only be redirected through rational territorial.

Estrutura espacial urbana e mobilidade: o caso da Região Metropolitana de São Paulo

A metrópole de São Paulo é a maior e mais importante aglomeração urbana do Brasil e está entre as dez maiores áreas urbanas do mundo. No entanto, a forma como acessibilidade espacial ocorre gera um fardo para a população e para a atividade econômica. Este trabalho pretende contribuir para a discussão de como melhorar a acessibilidade na Região Metropolitana de São Paulo estudando as características e impactos de estruturas espaciais urbana, analisando criticamente a estrutura espacial da metrópole e proporcionando sugestões de melhorias a fim de proporcionar uma mobilidade mais sustentável. Os procedimentos metodológicos incluem uma revisão bibliográfica sobre o tema e uma caracterização da estrutura espacial da Região Metropolitana de São Paulo, considerando a alocação de população, alocação de empregos e os padrões de deslocamento para os modais individual, coletivo e não motorizado. Apresentamos um relato da evolução recente, com dados das pesquisas de origem e destino realizadas pelo Metrô em 1997 e 2007 e da pesquisa de mobilidade de 2012. Também realizamos uma caracterização mais aprofundada com os dados da pesquisa de 2007. As cidades se desenvolvem com base no trade-off entre proximidade e mobilidade: a fim de maximizar as possibilidades de interação, as pessoas e as empresas tendem a se localizar onde o deslocamento necessário para executar essas interações requer menos custos financeiros, perda de tempo e desconforto. Esse processo molda a alocação espacial de atividades, que define parcialmente os hábitos de transporte. A estrutura espacial urbana pode ser caracterizada por sua escala (padrões compacto ou disperso), arranjo de densidades (padrão disperso ou clusterizado) e arranjo de atividade (padrão monocêntrico ou policêntrico). Estruturas espaciais com padrão mais compacto apresentam menores distâncias de viagem, reduzindo o impacto ambiental das viagens e viabilizando o transporte não motorizado e coletivo, e levam a um uso mais eficiente da terra, menor custo de infraestrutura e maior equidade no acesso ao transporte. Já estruturas clusterizadas policêntricas são associadas com maior facilidade de acesso à terra. Existe um debate sobre a capacidade de estruturas policêntricas resultarem em uma aproximação generalizada de empregos e residências. A Região Metropolitana de São Paulo apresenta um padrão monocêntrico na escala metropolitana, com fortes movimentos pendulares da periferia para o centro expandido da iii capital. Durante o período de análise, foi observada uma realocação da população para áreas mais centrais da cidade e uma centralização dos empregos ainda mais forte, resultando no agravamento dos movimentos pendulares. Existe uma clara divisão modal por renda: as classes mais altas utilizam majoritariamente automóveis, enquanto as classes mais baixas utilizam majoritariamente transporte coletivo e não motorizado. Para o futuro, o novo plano diretor tem o mérito de caminhar na direção do desenvolvimento urbano orientado pelo transporte sustentável, porém os níveis de densidade máxima permitidos ainda são parecidos com o do plano anterior e a largura dos eixos de adensamento é restrita. Acreditamos ser vantajoso um aumento do adensamento em áreas próximas dos empregos; geração de polos de adensamento em áreas mais afastadas dos empregos, mas próximas das infraestruturas de transporte coletivo de alta velocidade, e desencorajamento do adensamento em áreas com baixa acessibilidade. Também é necessária uma gestão integrada dos transportes, provendo infraestrutura para viagens não motorizadas e viagens intermodais, e uma gestão dos impactos negativos do adensamento.

Avaliação do comportamento mecânico de corpos de prova de misturas asfálticas a quente resultantes de diferentes métodos de compactação.

Os procedimentos de dosagem Marshall e Superpave definem os teores de ligante de projeto baseados em parâmetros volumétricos. Nessa situação, sistemáticas de dosagem com tipos de compactação diferentes podem conduzir a teores de ligante de projeto distintos que definirão a vida útil dos revestimentos asfálticos. O objetivo principal desse trabalho é avaliar o comportamento mecânico de misturas asfálticas moldadas por diferentes métodos de compactação de laboratório e analisar a relação com os resultados de amostras obtidas a partir de misturas compactadas por rolagem pneumática na mesa compactadora francesa. A fase experimental consistiu na dosagem de misturas pelos métodos Marshall e Superpave (este último com dois tamanhos de moldes), além da compactação na Prensa de Cisalhamento Giratória (PCG) e da moldagem de placas na mesa compactadora. Avaliou-se o efeito do tipo de compactação, do tamanho do molde e do número de giros do Compactador Giratório Superpave (CGS) no teor de projeto, nos parâmetros volumétricos, no comportamento mecânico e no desempenho quanto à fadiga e à resistência ao afundamento em trilha de roda. Adicionalmente, foi avaliada a eficiência do método Bailey de composição granulométrica quanto à resistência à deformação permanente em função do tipo de agregado. Constatou-se que o método Bailey, por si só, não garante resistência à deformação permanente, sendo essa dependente do tipo de agregado incluindo seus parâmetros de forma. O principal produto da pesquisa, com efeitos práticos no projeto de misturas asfálticas, traduz-se na recomendação do método Superpave com molde de 100 mm (para TMN <= 12,5 mm) para volume de tráfego médio a alto em detrimento ao método Superpave com 150 mm, tendo em vista que o primeiro apresenta densificação mais semelhante às amostras preparadas na compactação por rolagem (similar ao que ocorre em pista) o que resulta em comportamento mecânico também mais próximo da realidade de campo. A utilização dos moldes de 150 mm de diâmetro no CGS pode ser viabilizada desde que se adote um número de giros menor do aquele proposto para projeto pelo Asphalt Institute (2001). Por fim, é fundamental que os ensaios e os cálculos para obtenção dos parâmetros volumétricos e escolha do teor de projeto sigam ao normatizado pela ASTM, pelo Asphalt Institute (2001) e pela ABNT.

Sinterização flash do condutor catiônico beta-alumina sintetizada pelo método dos precursores poliméricos.

A beta-alumina de sódio é uma cerâmica condutora de íons Na+ utilizada como eletrólito sólido em baterias de sódio para armazenamento de energias intermitentes como energia solar e eólica. Devido ao alto teor de sódio, esse material é instável a altas temperaturas, podendo sofrer variações de composição durante a etapa de sinterização convencional que utiliza altas temperaturas por longos períodos de tempo. A sinterização flash é uma técnica de sinterização ativada por corrente elétrica que proporciona a densificação de compactos cerâmicos em poucos segundos, a temperaturas notavelmente mais baixas que as convencionais. Uma vez obrigatória a passagem de corrente elétrica através da amostra, a sinterização flash de qualquer material condutor parece bastante razoável. Não obstante, até o presente momento a maioria dos trabalhos publicados sobre o assunto aborda apenas condutores de vacância de oxigênio ou semicondutores, materiais compatíveis com eletrodos de platina (Pt). Nesse trabalho a sinterização flash de um condutor catiônico foi estudada utilizando-se a beta-alumina como material modelo. A beta-alumina foi sintetizada pelo método dos precursores poliméricos, caracterizada e então submetida à sinterização flash. O material de eletrodo padrão (platina) provou ser um eletrodo bloqueador em contato com a beta-alumina. O sucesso da sinterização flash foi determinado pela troca do material de eletrodo por prata (Ag), o que possibilitou uma reação eletroquímica reversível nas interfaces eletrodo-cerâmica e possibilitou a obtenção de um material densificado com morfologia e composição química homogêneas. Devido à metaestabilidade da beta-alumina, a atmosfera dos experimentos precisou ser alterada para manter a integridade desse material rico em um metal alcalino (Na+). A sinterização flash de um condutor catiônico é apresentada pela primeira vez na literatura e ressalta a importância da reação de eletrodo, que é um fator limitante para o sucesso da sinterização flash e precisa ser estudada e adaptada para cada tipo de material.

Physical and chemical evaluation of furniture waste briquettes

Furniture waste is mainly composed of wood and upholstery foam (mostly polyurethane foam). Both of these have a high calorific value, therefore, energy recovery would be an appropriate process to manage these wastes. Nevertheless, the drawback is that the energy content of these wastes is limited due to their low density mainly that of upholstery foam. Densification of separate foam presents difficulties due to its elastic character. The significance of this work lies in obtaining densified material by co-densification of furniture wood waste and polyurethane foam waste. Densification of furniture wood and the co-densification of furniture wood waste with polyurethane foam have been studied. On the one hand, the parameters that have an effect on the quality of the furniture waste briquettes have been analysed, i.e., moisture content, compaction pressure, presence of lignin, etc. The maximum weight percentage of polyurethane foam that can be added with furniture wood waste to obtain durable briquettes and the optimal moisture were determined. On the other hand, some parameters were analysed in order to evaluate the possible effect on the combustion. The chemical composition of waste wood was compared with untreated wood biomass; the higher nitrogen content and the concentration of some metals were the most important differences, with a significant difference of Ti content.