Socio-cultural influences on sanitation, fish handling and artisanal fish processing within the fishing communities

The fishery sector in Uganda has seen important changes in the last two decades. Among the changes registered, is the expansion of fish markets locally, regionally and internationally. Upon which, remarkable benefits have been realized at local and national levels, for instance, it is estimated that an average of 40m$ is being earned annually as foreign exchange. Besides, presently fish accounts for over 50% of total animal protein in take. However, it is argued that sustaining these gains has become an up hill task due to failure to maintain fish quality as a result of the rudimentary and inappropriate sanitary, fish handling and artisanal fish processing practices that both directly and indirectly affect the quality of fish and fish products. Therefore, against this background, a study of 507 respondents was undertaken among the Lake Victoria Communities specifically in Wakiso, Mayuge and Mukono districts. The study examined the perceptions of fishers on the social cultural practices of sanitation, fish handling and artisanal fish processing and consequently identified factors that influenced these practices.

Coastal development and pollution impact on the distribution of macrobenthic communities along the eastern coast of the Gulf of Suez (Egypt)

The configuration for the eastern side of the Gulf of Suez was studied over 241 km from Ras Mohammed to Ras Sudr including 35 station. Litters, tar balls and aged oil patches aggregated in considerable amounts on the beach and shore line of the middle part due to the oil spills from off-shore oil wells. A large reef flat in the shallow intertidal waters exists at stations 1 and 2 (Ras Mohammed, Protected area) and spars coral patches are less frequent at the Stations from 7 to 13. Density and diversity of marine benthos were higher on hard and cobble bottoms compared to muddy sand and sandy substrates. The assemblages of the benthic fauna are dominated by the gastropod Courmya (Thericium) vulgata; the bivalve Brachiodontes variabilis, and the barnacles Chthamalus stellatus, Balanus amphitrite and Tetraclita rubescens. The distribution of the algal cover in the intertidal region shows high abundance of the brown algae, Sargassum latifolium; padina pavonica and Cystoseira trinodis rather than the green and red algae. These species are found in both polluted and unpolluted areas. The changes in benthic structures in the study area depend not only on the state of pollution but also on the type of substrates.

Engineering change impact on product development processes

This paper presents a method to manage Engineering Changes (EC) during the product development process, which is seen to be a complex system. The ability to manage engineering changes efficiently reflects the agility of an enterprise. Although there are unnecessary ECs that should be avoided, many of the ECs are actually beneficial. The proposed method explores the linkages between the product development process features and product specifications dependencies. It suggests ways of identifying and managing specification dependencies to support the Engineering Change Management process. Furthermore, the impacts of an EC on the product specifications as well as on the process organization are studied. © 2009 World Scientific Publishing Company.

Simulation of solitary wave impact on coastal structures using weakly compressible and incompressible SPH methods

In this paper, we engage a Lagrangian, particle-based CFD method, named Smoothed Particle Hydrodynamic (SPH) to study the solitary wave motion and its impact on coastal structures. Two-dimensional weakly compressible and incompressible SPH models were applied to simulate wave impacting on seawall and schematic coastal house. The results confirmed the accuracy of both models for predicting the wave surface profiles. The incompressible SPH model performed better in predicting the pressure field and impact loadings on coastal structures than the weakly compressible SPH model. The results are in qualitatively agreement with experimental results. Copyright © 2011 by the International Society of Offshore and Polar Engineers (ISOPE).

Fragmentation effects on diversity of wasp community and its impact on fig/fig wasp interaction in Ficus racemosa L.

Habitat fragmentation usually results in alteration of species composition or biological communities. However, little is known about the effect of habitat fragmentation on the fig/fig wasp system. In this study, we compared the structure of a fig wasp community and the interaction between figs and fig wasps of Ficus racemosa L. in a primary forest, a locally fragmented forest and a highly fragmented forest. Our results show that, in the highly fragmented forest, the proportion of pollinator wasps is lower and the proportion of non-pollinator wasps is higher compared with the primary forest and locally fragmented forest. The proportion of fruits without pollinator wasps in mature fruits is also greatly increased in the highly fragmented forest. The proportion of galls in all female flowers increases in the highly fragmented forest, whereas the proportion of viable seeds does not change considerably. The disruption of groups of fig trees results in a decrease in pollinator wasps and even might result in the extinction of pollinator wasps in some extreme cases, which may transform the reciprocal interaction between figs and fig wasps into a parasite/host system. Such an effect may lead to the local extinction of this keystone plant resource of rain forests in the process of evolution, and thereby, may change the structure and function of the tropical rain forest.

Introducing tilapia (GIFT) with shrimp (Penaues monodon) in brackishwater rice-shrimp system: impact on water quality and production

Mixed rearing of tilapia (Genetically Improved Farmed Tilapia, GIFT) with shrimp (Penaeus monodon) in brackishwater rice-shrimp system was assessed for its impact on dry season's shrimp production. The experiment was conducted in pre-selected farmer's field located at Paikgacha Upazila of Khulna district and designed with three different densities (treatment) of GIFT, viz, 0.3, 0.4 and 0.5/m² with a constant stocking density of shrimp at 3/m². Each treatment had three replications. There had a set of control treatment where GIFT was not stocked. Results of the experiment revealed that tilapia did not exert any significant effect (p>0.05) on the water quality variables, even on survival rate of shrimp (p>0.05) under farm level condition in rice-shrimp rotational system, but a density dependent negative effect (P<0.05) on the growth of shrimp led apparently lower production rate of shrimp. Though tilapia provided the major augment of total production (p<0.05) in the respective treatments than in monoculture of shrimp, but not that of the economic return. However, economic loss due to sudden shrimp crop failure might be partially minimized by the tilapia crop.

Parasitic fish diseases and their impact on potential fish production in East Africa

Protein deficient diets are a standard way of life in many parts of East Africa;this of course tends to result in shorter life expectancy and chronic ill-health. Population increase is sufficiently high to outdistance the economic gains that may be made in various fields. With recurrent shortages of basic commodities not only in East Africa, but in many parts of the world, it is becoming increasingly clear that agricultural production practices must be maximised rapidly in order to meet the world's constantly expanding need for food. Here in East Africa, while our food requirements can be met most of the time, our protein requirements are far from being met. Yields from traditional fishery resources, must therefore be increased. The farming of fish (aquaculture)adds a new dimension to food production in general and high quality protein production in particular, in that it can be incorporated into other agricultural production activities.

Change impact on a product and its redesign process: A tool for knowledge capture and reuse

Change propagates, potentially affecting many aspects of a design and requiring much rework to implement. This article introduces a cross-domain approach to decompose a design and identify possible change propagation linkages, complemented by an interactive tool that generates dynamic checklists to assess change impact. The approach considers the information domains of requirements, functions, components, and the detail design process. Laboratory experiments using a vacuum cleaner suggest that cross-domain modelling helps analyse a design to create and capture the information required for change prediction. Further experiments using an electronic product show that this information, coupled with the interactive tool, helps to quickly and consistently assess the impact of a proposed change. © 2012 Springer-Verlag London Limited.

Characteristics of blood flow in microchannels and relevant impact on modelling blood behaviour in biochip separators

This paper reports a perspective investigation of computational modelling of blood fluid in microchannel devices as a preparation for future research on fluid-structure interaction (FSI) in biofluid mechanics. The investigation is carried out through two aspects, respectively on physical behaviours of blood flow in microchannels and appropriate methodology for modelling. The physics of blood flow is targeted to the challenges for describing blood flow in microchannels, including rheology of blood fluid, suspension features of red blood cells (RBCs), laminar hydrodynamic influence and effect of surface roughness. The analysis shows that due to the hyperelastic property of RBC and its comparable dimension with microchannels, blood fluid shows complex behaviours of two phase flow. The trajectory and migration of RBCs require accurate description of RBC deformation and interaction with plasma. Following on a discussion of modelling approaches, i.e. Eulerian method and Lagrangian method, the main stream modelling methods for multiphase flow are reviewed and their suitability to blood flow is analysed. It is concluded that the key issue for blood flow modelling is how to describe the suspended blood cells, modelled by Lagrangian method, and couple them with the based flow, modelled by Eulerian method. The multiphase flow methods are thereby classified based on the number of points required for describing a particle, as follows: (i) single-point particle methods, (ii) mutli-point particle methods, (iii) functional particle methods, and (iv) fluid particle methods. While single-point particle methods concentrate on particle dynamic movement, multipoint and functional particle methods can take into account particle mechanics and thus offer more detailed information for individual particles. Fluid particle methods provide good compromise between two phases, but require additional information for particle mechanics. For furthermore detailed description, we suggest to investigate the possibility using two domain coupling method, in which particles and base flow are modelled by two separated solvers. It is expected that this paper could clarify relevant issues in numerical modelling of blood flow in microchannels and induce some considerations for modelling blood flow using multiphase flow methods. © 2012 IEEE.

Three-dimensional distribution of Al in high-k metal gate: Impact on transistor voltage threshold

The three-dimensional spatial distribution of Al in the high-k metal gates of metal-oxide-semiconductor field-effect-transistors is measured by atom probe tomography. Chemical distribution is correlated with the transistor voltage threshold (VTH) shift generated by the introduction of a metallic Al layer in the metal gate. After a 1050 °C annealing, it is shown that a 2-Å thick Al layer completely diffuses into oxide layers, while a positive VTH shift is measured. On the contrary, for thicker Al layers, Al precipitation in the metal gate stack is observed and the VTH shift becomes negative. © 2012 American Institute of Physics.