Selective fermentation of gentiobiose-derived oligosaccharides by human gut bacteria and influence of molecular weight

Gentiooligosaccharides and alternansucrase gentiobiose acceptor products were fractionated by their degree of polymerization (DP) on a Bio-Gel P2 column. Fractions were characterized by matrix-assisted laser desorption ionization time-of-flight mass spectroscopy, and incubated with human faecal bacteria under anaerobic conditions at 37 degrees C. The growth of predominant gut bacteria on the oligosaccharides was evaluated by fluorescence in situ hybridization and a prebiotic index (PI) was calculated. Lower DP gentiooligosaccharides (DP2-3) showed the highest selectivity (PI of 4.89 and 3.40, respectively), whereas DP4-5 alternansucrase gentiobiose acceptor products generated the greatest values (PI of 5.87). The production of short-chain fatty acids was also determined during the time course of the reactions. The mixture of DP6-10 alternansucrase gentiobiose acceptor products generated the highest levels of butyric acid but the lowest levels of lactic acid. Generally, for similar molecular weights, alternansucrase gentiobiose acceptor products gave higher PI values than gentiooligosaccharides.

Influence of glycosidic linkages and molecular weight on the fermentation of maltose-based oligosaccharides by human gut bacteria

A structure-function study was carried out to increase knowledge of how glycosidic linkages and molecular weights of carbohydrates contribute toward the selectivity of fermentation by gut bacteria. Oligosaccharides with maltose as the common carbohydrate source were used. Potentially prebiotic alternansucrase and dextransucrase maltose acceptor products were synthesized and separated into different molecular weights using a Bio-gel P2 column. These fractions were characterized by matrix-assisted laser desorption/ionization time-of-flight. Nonprebiotic maltooligosaccharides with degrees of polymerization (DP) from three to seven were commercially obtained for comparison. Growth selectivity of fecal bacteria on these oligosaccharides was studied using an anaerobic in vitro fermentation method. In general, carbohydrates of DP3 showed the highest selectivity towards bifidobacteria; however, oligosaccharides with a higher molecular weight (DP6-DP7) also resulted in a selective fermentation. Oligosaccharides with DPs above seven did not promote the growth of "beneficial" bacteria. The knowledge of how specific structures modify the gut microflora could help to find new prebiotic oligosaccharides.

Prebiotic properties of alternansucrase maltose-acceptor oligosaccharides

alpha-(1-6) and alpha-(1-3)-linked oligosaccharides were obtained from the reaction between sucrose and maltose, catalyzed by an alternansucrase isolated from Leuconostoc mesenteroides NRRL B-21297 and separated using a Bio-Gel P2 column in six fractions. Fractions 1, 2, and 3 were mainly composed of DP3, DP4, and DP5, respectively. However, fractions 4, 5, and 6 consisted of mixtures from DP5 to IDP9, and they are identified here as DP5.7, DP6.7, and DP7.4, respectively. Potential prebiotic properties of these oligosaccharides were tested using pure and mixed cultures. Generally, in pure studies, most of the tested bacteria failed to grow or grew poorly using the DP6.7 and DP7.4 fractions and showed the greatest growth on DP3. Growth of fecal bacteria on the maltose-acceptor products was tested following an in vitro fermentation method. DP3 showed the highest prebiotic effect, followed by DP4 and DP6.7, whereas DP7.4 did not present any prebiotic activity.

Potential for the development of prebiotic oligosaccharides from biomass

Waste biomass contains a multitude of complex carbohydrate molecules. These carbohydrates can be considered as a resource for the development of novel prebiotic oligosaccharides which may have better functionality than those currently established on the market. Enhanced persistence of the prebiotic effect along the colon, antipathogen effects, and more closely targeted prebiotics, might all be possible starting from plant polysaccharides. Of particular interest for the development of novel prebiotics are oligosaccharides from arabinoxylans and pectins. Oligosaccharides derived from the breakdown of both classes have received increased research attention recently. The development of prebiotics based upon biomass will demand the development of new manufacturing technologies.

Pectic oligosaccharides as prebiotics

Pectic oligosaccharides were observed to have bifidogenic prebiotic properties. Pectic oligosaccharides were also found to possess anti-adhesive properties for food pathogen toxins and they stimulated apoptosis of colon cancer cells. Orange peel albedo (white part) was a good source of pectic oligosaccharides with prebiotic properties. Microwave and autoclave extraction produced pectic oligosaccharides with higher degrees of polymerization than those produced with an ultrafiltration dead-end membrane enzyme reactor. We propose that these larger orange albedo pectic oligosaccharides may have greater persistence through the colon, making them excellent candidates for second generation prebiotic product development.

‘Once a miner, always a miner’: Poverty and livelihood diversification in Akwatia, Ghana

This paper offers an alternative viewpoint on why people choose to engage in artisanal mining – the low tech mineral extraction and processing of mainly precious metals and stones – for extended periods in sub-Saharan Africa. Drawing upon experiences from Akwatia, Ghana’s epicentre of diamond production since the mid-1920s, the analysis challenges the commonly-held view that the region’s people are drawn to artisanal mining solely because of a desire ‘to get rich quick’. A combination of events, including the recent closure of Ghana Consolidated Diamonds Ltd’s industrial-scale operation and decreased foreign investment in the country’s diamond industry over concerns of it potentially harbouring ‘conflict’ stones from neighbouring Coˆte D’Ivoire, has had a debilitating economic impact on Akwatia. In an attempt to alleviate their hardships, many of the town’s so-called ‘lifetime’ diamond miners have managed to secure employment in neighbouring artisanal gold mining camps. But their decision has been condemned by many of the country’s policymakers and traditional leaders, who see it solely as a move to secure ‘fast money’. It is argued here, however, that these people pursue work in surrounding artisanal gold mining communities mainly because of poverty, and that their decision has more to do with a desire to immerse in activities with which they are familiar, that offer stable employment and consistent salaries, and provide immediate debt relief. Misdiagnosis of cases such as Akwatia underscores how unfamiliar policymakers and donors are with the dynamics of ASM in sub-Saharan Africa.

Crop rotation scheduling with adjacency constraints

In this article we propose a 0-1 optimization model to determine a crop rotation schedule for each plot in a cropping area. The rotations have the same duration in all the plots and the crops are selected to maximize plot occupation. The crops may have different production times and planting dates. The problem includes planting constraints for adjacent plots and also for sequences of crops in the rotations. Moreover, cultivating crops for green manuring and fallow periods are scheduled into each plot. As the model has, in general, a great number of constraints and variables, we propose a heuristics based on column generation. To evaluate the performance of the model and the method, computational experiments using real-world data were performed. The solutions obtained indicate that the method generates good results.

Investigation by Combined Solid-State NMR and SAXS Methods of the Morphology and Domain Size in Polystyrene-b-Polyethylene Oxide-b-Polystyrene Triblock Copolymers

The microphase structure of a series of polystyrene-b-polyethylene oxide-b-polystyrene (SEOS) triblock copolymers with different compositions and molecular weights has been studied by solid-state NMR, DSC, wide and small angle X-ray scattering (WAXS and SAXS). WAXS and DSC measurements were used to detect the presence of crystalline domains of polyethyleneoxide (PEO) blocks at room temperature as a function of the copolymer chemical composition. Furthermore, DSC experiments allowed the determination of the melting temperatures of the crystalline part of the PEO blocks. SAXS measurements, performed above and below the melting temperature of the PEO blocks, revealed the formation of periodic structures, but the absence or the weakness of high order reflections peaks did not allow a clear assessment of the morphological structure of the copolymers. This information was inferred by combining the results obtained by SAXS and (1)H NMR spin diffusion experiments, which also provided an estimation of the size of the dispersed phases of the nanostructured copolymers. (C) 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48:55-64,2010

Assessment of the ergonomic design of diagnostic ultrasound transducers through wrist movements and subjective evaluation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

J.-M. G. Le Clézio: ressonâncias surrealistas

A partir de três obras de Le Clézio – o romance Voyages de l’autre cote (1975), o ensaio L’Inconnu sur la terre (1978) e o conto “Lullaby”, este integrando o livro de contos intitulado Mondo et autres histoires (1978) –, pretende-se focalizar os diálogos que esses textos estabelecem com a literatura surrealista ao fazer emergir o real oculto e determinar uma realidade ampliada.

Are the anticipatory trunk movements occurring during load-carrying activities protective or risky?

This study evaluated anteroposterior trunk movements and the time spent on activities of load-carrying to surfaces at different heights, among experienced and inexperienced individuals. Thirty-six healthy males (16 experienced and 20 inexperienced in load-carrying) had their trunk movements recorded by an electrogoniometer while transporting boxes (7 and 15 kg) to surfaces of variable heights (low, low intermediate, high intermediate and high). Longer time was spent on trunk flexion when carrying loads to low surfaces and on trunk extension when carrying to high surfaces (p<0.05). Differences in time spent on trunk flexion/extension were identified between loads, and between groups for the heavier load. There were no differences in flexion/extension amplitudes between groups or loads. Although unnecessary flexion/extension occurring prior to a task may increase the exposure of the trunk to risky movements, the amplitudes reported here were relatively small and seemed to have occurred to facilitate the final tasks.Relevance to industryLifting devices and technological assistance are increasingly available in industrial settings. However, distribution centers and delivery services represent new demands on workers and involve an expressive amount of manual handling and carrying activities. Thus, studies on carrying strategies are necessary as they can provide guidelines for safer activities. (C) 2007 Elsevier B.V. All rights reserved.

Uso medicinal da pimenta malagueta (Capsicum frutescens L.) em uma comunidade de várzea à margem do rio Amazonas, Santarém, Pará, Brasil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mapeamento do contorno estrutural do embasamento da bacia sedimentar de Curitiba - PR

The sedimentary Curitiba basin is located in the Central-Southern part of the first Parananense plateau, and comprises Curitiba (PR), and part of the neighbour Municipalities (fig.1). It is supposed to be of Plio-Pleistocene age. It has a shallow sedimentary fulfillment, represented by the Guabirotuba formation (BIGARELLA and SALAMUNI, 1962) which is dristributed over a large area of about 3.000km2. The internal geometry, not entirely known yet, is actually object of detailed research, that shows its geological evolution to Cenozoic tectonic movements. For the purpose of this study the definition of the structural contour of the basement and their depo-centers is fundamental. This paper presents the results of the integration of surface and subsurface data, processed by statistical methods, which allowed a more precise definition of the morphostructural framework of the basement. For the analysis of the geological spacial data, specific softwares were used for statistical processing for trend surfaces analysis. The data used in this study are of following types: a) drilling logs for ground water; b) description of surface points of geological maps (CRPM, 1977); c) description of points of geotechnical drillings and down geological survey. The data of 223 drilling logs for ground water were selected out of 770 wells. The description files of 700 outcrops, as well as planialtimetric field data, were used for the localization of the basement outcrop. Thus, a matrix with five columns was set up: utm E-W (x) and utm N-S (y); surface altitude (z); altimetric cote of the contact between sedimentary rocks and the basement (k); isopachs (l). For the study of the basement limits, the analysis of surface trends of 2(nd) and 3(rd) degree polinomial for the altimetric data (figs. 2 and 3) were used. For the residuals the method of the inverse of the square of the distance (fig.4) was used. The adjustments and the explanations of the surfaces were made with the aid of multiple linear regressions. The analysis of 3rd degree polinomial trend surface (fig.3) confirmed that the basement tends to be more exposed towards NNW-SSE explaining better the data trend through an ellipse, which striking NE-SW and dipping SW axis coincides with the trough of the basin observed in the trending surface of the basement. The performed analysis and the respective images offer a good degree of certainty of the geometric model of the Curitiba Basin and of the morphostructure of its basement. The surface trend allows to sketch with a greater degree of confidence the structural contour of the topgraphic surface (figs. 5 and 6) and of the basement (figs. 7 and 8), as well as the delimitation of intermediate structural heights, which were responsible for isolated and assymmetric depocenters. These details are shown in the map of figures 9 and 10. Thus, the Curitiba Basin is made up by a structural trough stretching NE-SW, with maximum preserved depths of about 80m, which are separated by heights and depocenters striking NW-SE (fig. 11). These structural features seems to have been controlled by tectonic reactivation during the Tertiary (HASUI, 1990) and which younger dissection was conditioned by neotectonic processes (SALAMUNI and EBERT, 1994).