1000 resultados para Contaminação do solo e da água
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
The Health Care Wastes (HCW) present serious risks to health and to the environment, if incorrectly managed, because in addition to the presence of pathogenic agents, the may pollute the soil and the water. Thus, a study was performed aiming at diagnosing the HCW management in Araraquara (SP), identifying the difficulties of the agents (municipal gestors and managers of institutions which generate this wastes) in implanting the HCW management Plan (HCWMP) proposed by ANVISA, in order to subside the HCWMP implantation. The methodology was based on question applications in health centers selected to be the samples, and on quantitative data related to the phases of Treatment and Final Disposal, provided by DAAE. As a result, it was observed that a great part of the interviewed centers managed these wastes according to norm RDC no 306/ 2004 of ANVISA. However, only 24% of the interviewed centers knew about this norm, and only 22% of them had the HCWMP. The difficulties in managing the HCW concentrated in the correct segregation of theses wastes in the generation source. The large number of people involved in this phase suggests the causes of the difficulties.
Resumo:
A contaminação do solo pelo descarte de substâncias tóxicas adquiriu, nos últimos anos, maior atenção da comunidade científica a qual tem alertado a população dos países, em geral, para as conseqüências, em especial, as patologias que podem ocorrer quando estas substâncias adentram nossa cadeia alimentar. Neste trabalho procurou-se apresentar as fontes de contaminação e a toxicidade do cádmio, do chumbo, do mercúrio e do manganês, quando estes se encontram em níveis elevados no solo e nos mananciais superficiais e subterrâneos. Com relação aos três primeiros metais, sua alta dosagem pode provocar, no ser humano, diversos tipos de câncer, lesões no estômago e pulmões, além de alterações importantes nos sistemas imunológico e nervoso central. O manganês, um dos metais mais comuns da crosta terrestre, largamente utilizado pela indústria e disponibilizado, em grandes quantidades no meio ambiente, em doses elevadas pode causar doenças pulmonares e neurológicas.
Modelos agrometeorológicos estatísticos de previsão de produtividade e qualidade para cana-de-açúcar
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Pós-graduação em Engenharia Civil e Ambiental - FEB
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Produção Vegetal) - FCAV
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Environmental liabilities from accidents in the retail petroleum industry, especially in urban areas, have represented a serious problem whose impact reaches the underground, people's health and even economic losses with the remediation process. In U.S.A. are estimated hundreds of billions of dollars invested in soil remediation processes. The results of the reports and investigative reports of liabilities in fuel stations distributed in the urban area of Natal-RN were used to estimate the local scenario of contamination. This database has been possible to determine the main contaminants (BTEX, PAHs, TOC), affected neighborhoods and types of potentially more impacted soils. Experiments were carried out in order to reverse contamination of this scenario, where the soil type was a factor in the planning, because it influences directly on the effectiveness of remediation techniques studied: Oxidation by hydrogen peroxide and oxidation by sodium persulphate. These oxidants are activated forming free radicals (HO•-, SO4 •-, HO2 • , O2 •-, S2O8 -2, etc) responsible for to mineralize the hydrocarbons and other organic compounds (releasing O2 e CO2). In the activation process, the ferrous ions (II) and ferric (III) were studied as well as hydrogen peroxide activation technique with sodium persulfate, the latter being presented the best efficiency among all the study, when activated with Fe+3. In addition to defining the most efficient technique, the aim of this study was to evaluate the influence of different soils among oxidative techniques, characterizing the effect of the concentration of these oxidants and also the concentration of the catalysts. Exists in most scenarios evaluated the presence of intrinsic total iron soil matrix. The so-called latosols present microaggregates reddish indicating the presence of these reactive species like iron and clayey aspect. The kinetic study was conducted by experimental design and monitoring of the percentage of total carbon (SSM-5000A) in the solid and liquid phases, knowing that 82.4% of the diesel molecule is carbon. Yet organic carbon and pH of liquid samples were analyzed for technical, characterizing the influence of soil type and its operating condition. The Fenton-like technique H2O2 e Fe+2 presented satisfactory oxidation, including sandy soil, but well below the best result. The sodium persulphate only activated with temperature, even in the most favorable soil, did not provide good efficiency. The best technique in the study had the concentration profile with 2,2x10- 1mol.L-1 of Na2S2O8 activated with 6,53x10-1mol.L-1 of H2O2 and 2,5x10-2 Fe3+mol.L-1 which reduced in less than a day 96 contamination in red soil, initially with 66,667 mg of diesel per kg of clean soil
Resumo:
The oil industry is one of the activities that generates more waste to the environment. The drill cuttings is a waste generated in large quantities in the drilling process and that may cause environmental damage such as soil contamination and consequently the contamination of groundwater if disposed of without prior treatment. Arises the need to develop scientific activities and research ways to adapt these wastes the current environmental standards. In the case of solid wastes, the NBR 10004: 2004 of the Brazilian Association of Technical Standards (ABNT) classifies them into class I waste (hazardous) and class II (not dangerous), which determines which wastes may or may not be discarded in the environment without causing environmental impact. This study presents a novel alternative for treating drill cuttings, where this waste was classified as class I (Abreu & Souza, 2005), mainly by removing the n-paraffin present in it, since this arises when using drilling fluids base oil. Using microemulsion systems promotes the removal of this contaminant drill cuttings samples from wells located in Alto do Rodrigues - RN. Initially, we determined the concentration of paraffin using infrared method in samples were extracted with ultrasound, we obtained a paraffin concentration in the range from 36.59 to 43.52 g of paraffin per kilogram of cuttings. Used two microemulsion systems containing two nonionic surfactants from different classes, one is an alcohol ethoxylated (UNTL-90) and the other an nonylphenol ethoxylated (RNX 110). The results indicated that the system UNTL-90 surfactant has better efficiency than the system with RNX 110. The study of the influence of contact time at the extraction showed that for times greater than 25 minutes has a tendency to increase the percentage extraction with increasing contact time. It was also observed that the extraction is fast because at 1 minute contact has 22.7% extraction. The reuse of the microemulsion system without removing the paraffin extracted in previous steps, showed reduction of 29.32 in percentage of extraction by comparing the first and third extraction, but by comparing the first and second extractions reduction is 8.5 in percentage extraction, so the systems reuse optimization can be an option for economically viable removing paraffin from cuttings. The extraction with shaking is more effective in the treatment of cuttings, reaching the extraction percentage of 87.04%, that is, obtaining a drill cuttings with 0.551% paraffin. Using the percentage of paraffin employed in non-aqueous drilling fluids and fluid maximum limit on cuttings for disposal established by the Environmental Protection Agency of the United States (US EPA), one arrives at the conclusion that the level of paraffin on gravel cannot exceed 3.93%. Conclude that the amount of paraffin in the treated cuttings with the microemulsion system with shaking is below the established by US EPA, showing that the system used was efficient in removing the paraffin from the drill cuttings.
Resumo:
The transport of people and goods contributes to the deterioration of the environment in urban areas because of the generation of pollution, such as, air, noise, soil, water or visual degradation. The heavy vehicles that use diesel as fuel are mainly responsible for the emission of nitrogen oxides (NOx) and particulate matter (PM), contributing to participation of the transport sector in air pollution. In addition, there is emission of Greenhouse Gas (GHG) whose main component is carbon dioxide (CO2). In most major cities, public transportation is often considered as a less polluting alternative compared to the private vehicle, in view of the potential to reduce, per passenger, the emissions of GHG and air pollutants. The study area was the city of Uberlândia and the objects of study were the trunk lines of the Sistema Integrado de Transporte (SIT). The emissions of NOx, PM and CO2 were estimated through the bottom-up approach which used the route of each bus line and also fuel consumption obtained through simulation from the TSIS software. The software has some result limitations, there are no report about the emission of pollutants by bus, and it is not able to change specifications for the fuel used by the fleet. The results obtained through calculations of pollutants and GHG emission by the bottom-up approach show that the emission is higher when using fuel comsuption obtained in simulation than using distance. For the results considering fuel and distance there was a reduction in emissions comparing ethanol and diesel.
Resumo:
Me gustaría comenzar por agradecer a mi director Josu Larrañaga Altuna no solo su asistencia, guía y soporte para completar esta tesis, sino también el profundo respeto mostrado a la hora de plantear su ejecución en simbiosis con mi paulatino desarrollo vital como artista. Estoy en deuda con mi tutor en Estados Unidos, Leo Costello, por la generosidad mostrada al acogerme durante dos años como investigadora invitada en el Departamento de Historia del Arte de Rice University en Houston, durante los cuales iluminó algunos de los temas que han sido fundamentales para establecer las raíces históricas de la presente investigación. El estímulo y la calurosa acogida ofrecidos por la académica Fabiola López- Duran, Geoff Winnngahan y Annick Dekiouk que hicieron de Houston mi casa, integrándome en ese mundo donde los tejidos artísticos profesionales y académicos se entrelazan ha sido invaluable, así como la beca otorgada por la comisión Fulbright de España y la aceptación en el International Studio and Curatorial Program de Nueva York (ISCP) quienes hicieron posible la aventura americana. Gracias a esta, descubrí como una revelación a Robert Overby, esencial para el rumbo que tomó posteriormente la investigación. José Luis Corazón Ardura y Elisabeth Cummins Muñoz me aportaron el despertar a la conciencia de palabra justa sin renunciar a la esencia poética. Espero que esta tesis refleje las inestimables aportaciones que recibí de cada uno de ellos. Por otra parte me gustaría agradecer a mis galeristas Kerry Inman y Pilar Serra su apoyo a la hora de compatibilizar la vida académica con la artística. A mi hija Mariana por ofrecerme la maravillosa experiencia de descubrir paulatinamente el mundo juntas a través del lenguaje y sus diferentes idiomas. Y finalmente, mi más profundo reconocimiento a mi marido Alexandre, por creer en mí ciegamente, desde el principio y por encima de todas las cosas, mostrando su apoyo incondicional y constante en el tiempo. Porque su extraordinario valor me ha permitido seguir mis sueños y sobre todo por ofrecerme todas esas vidas posibles que no había osado soñar...
Resumo:
Energy indicators are tools to support decision-making on energy. The growing debate on sustainable development, contributed to the energy indicators began to incorporate, besides the traditional economic, social and environmental information. Therefore, taking sustainable development into account, it is important to know contributions and limitations of these tools. The overall goal of this study is to analyze the contributions and limitations of the energy indicators as assets to support sustainable development.This study can be classified as descriptive because it relies on bibliographical and documental material. As a result of documental analysis, 55 energy indicators for sustainable development (EISD) were selected. The selection took place by identification of those indicators through the institutions International Atomic Energy Agency (IAEA), Helio International and World Energy Council (WEC), among 19 institutions involved in research on energy identified in the survey. The study stresses that most of the selected indicators focuses on the economic dimension, 19 EISDs (34.54%), followed by 10 EISDs (18.18%) focused on the environmental dimension, 9 EISDs (16.36%) focused on the social issues, 7 EISDs (12.45%) are classified as resilience, 4 EISDs (7.27%) is about governance, 3 EISDs (5.45%) focused on vulnerability and 3 EISDs (5.45%) is about policy. Despite the inclusion of indicators associated with other dimensions than economy, information provided by those indicators emerges as their own limitation. Because, recently, indicators’ information were used to promote sustainable development as well as the opposite. Additionally, the study identified EISDs whose components were not specified. They may enable generation of information far from the real scenario, if components dissociated EISD would be taking into consideration or even the non-consideration of relevant components. Despite limitations, EISDs assisting decision-makers contributes to the pursuit of sustainable development. But they may be improved through information about environmental issues, such as emission of atmospheric pollutants, soil and water, resulting from energy sources, helps identifying which sources are more or less harmful for sustainable development. However, difficulty in collecting data, identifying the components for calculation of each indicator and even interpretation of this, as analyzed, may not only fail to contribute to sustainable development, as can delay taking corrective or preventive decisions.