Forward induction and the excess capacity puzzle: An experimental investigation.

While the theoretical industrial organization literature has long argued that excess capacity can be used to deter entry into markets, there is little empirical evidence that incumbent firms effectively behave in this way. Bagwell and Ramey (1996) propose a game with a specific sequence of moves and partially-recoverable capacity costs in which forward induction provides a theoretical rationalization for firm behavior in the field. We conduct an experiment with a game inspired by their work. In our data the incumbent tends to keep the market, in contrast to what the forward induction argument of Bagwell and Ramey would suggest. The results indicate that players perceive that the first mover has an advantage without having to pre-commit capacity. In our game, evolution and learning do not drive out this perception. We back these claims with data analysis, a theoretical framework for dynamics, and simulation results.

Reforms of the pre-graduate curriculum for medical students: the Bologna process and beyond.

For several years, all five medical faculties of Switzerland have embarked on a reform of their training curricula for two reasons: first, according to a new federal act issued in 2006 by the administration of the confederation, faculties needed to meet international standards in terms of content and pedagogic approaches; second, all Swiss universities and thus all medical faculties had to adapt the structure of their curriculum to the frame and principles which govern the Bologna process. This process is the result of the Bologna Declaration of June 1999 which proposes and requires a series of reforms to make European Higher Education more compatible and comparable, more competitive and more attractive for Europeans students. The present paper reviews some of the results achieved in the field, focusing on several issues such as the shortage of physicians and primary care practitioners, the importance of public health, community medicine and medical humanities, and the implementation of new training approaches including e-learning and simulation. In the future, faculties should work on several specific challenges such as: students' mobility, the improvement of students' autonomy and critical thinking as well as their generic and specific skills and finally a reflection on how to improve the attractiveness of the academic career, for physicians of both sexes.

Tele-education and competencies assessment to Brazilian's auxiliary nurse

This paper presents Brazilian's experience with the organization of methods and strategies for the assessment of competencies for technical level of nursing workers. The evaluative process proposed includes the creation of a learning-oriented and distance-based virtual assessment environment. The proposed methodology for professional competencies assessment adopted a critical-emancipatory perspective. A tele-education environment was deployed, involving software development - a virtual man - and an assessment cybertutor. Learning modules for the cybertutor were developed and videos of clinical simulations, structured around assessment in cognitive, behavioral, and simulation areas. The evaluation modules considered aspects of competencies in know-know, know-how and know-act professional ethics. Also the variability of practices of nursing - hospitals and primary health care units - was considered. This instrument showed as an important strategy for the optimization of assessment procedures that are widely used across Brazil and it is a powerful tool for incorporation into the continuing professional education.

Knowledge management for systems biology a general and visually driven framework applied to translational medicine

Background: To enhance our understanding of complex biological systems like diseases we need to put all of the available data into context and use this to detect relations, pattern and rules which allow predictive hypotheses to be defined. Life science has become a data rich science with information about the behaviour of millions of entities like genes, chemical compounds, diseases, cell types and organs, which are organised in many different databases and/or spread throughout the literature. Existing knowledge such as genotype - phenotype relations or signal transduction pathways must be semantically integrated and dynamically organised into structured networks that are connected with clinical and experimental data. Different approaches to this challenge exist but so far none has proven entirely satisfactory. Results: To address this challenge we previously developed a generic knowledge management framework, BioXM™, which allows the dynamic, graphic generation of domain specific knowledge representation models based on specific objects and their relations supporting annotations and ontologies. Here we demonstrate the utility of BioXM for knowledge management in systems biology as part of the EU FP6 BioBridge project on translational approaches to chronic diseases. From clinical and experimental data, text-mining results and public databases we generate a chronic obstructive pulmonary disease (COPD) knowledge base and demonstrate its use by mining specific molecular networks together with integrated clinical and experimental data. Conclusions: We generate the first semantically integrated COPD specific public knowledge base and find that for the integration of clinical and experimental data with pre-existing knowledge the configuration based set-up enabled by BioXM reduced implementation time and effort for the knowledge base compared to similar systems implemented as classical software development projects. The knowledgebase enables the retrieval of sub-networks including protein-protein interaction, pathway, gene - disease and gene - compound data which are used for subsequent data analysis, modelling and simulation. Pre-structured queries and reports enhance usability; establishing their use in everyday clinical settings requires further simplification with a browser based interface which is currently under development.

On the Segregation of Genetically Modified, Conventional, and Organic Products in European Agriculture: A Multi-market Equilibrium Analysis, October 2005

Evaluating the possible benefits of the introduction of genetically modified (GM) crops must address the issue of consumer resistance as well as the complex regulation that has ensued. In the European Union (EU) this regulation envisions the “co-existence” of GM food with conventional and quality-enhanced products, mandates the labelling and traceability of GM products, and allows only a stringent adventitious presence of GM content in other products. All these elements are brought together within a partial equilibrium model of the EU agricultural food sector. The model comprises conventional, GM and organic food. Demand is modelled in a novel fashion, whereby organic and conventional products are treated as horizontally differentiated but GM products are vertically differentiated (weakly inferior) relative to conventional ones. Supply accounts explicitly for the land constraint at the sector level and for the need for additional resources to produce organic food. Model calibration and simulation allow insights into the qualitative and quantitative effects of the large-scale introduction of GM products in the EU market. We find that the introduction of GM food reduces overall EU welfare, mostly because of the associated need for costly segregation of non-GM products, but the producers of quality-enhanced products actually benefit.

Forward induction and the excess capacity puzzle: An experimental investigation

While the theoretical industrial organization literature has long arguedthat excess capacity can be used to deter entry into markets, there islittle empirical evidence that incumbent firms effectively behave in thisway. Bagwell and Ramey (1996) propose a game with a specific sequence ofmoves and partially-recoverable capacity costs in which forward inductionprovides a theoretical rationalization for firm behavior in the field. Weconduct an experiment with a game inspired by their work. In our data theincumbent tends to keep the market, in contrast to what the forwardinduction argument of Bagwell and Ramey would suggest. The results indicatethat players perceive that the first mover has an advantage without havingto pre-commit capacity. In our game, evolution and learning do not driveout this perception. We back these claims with data analysis, atheoretical framework for dynamics, and simulation results.

Numerical analysis of the impact of charcoal production on soil hydrological behavior, runoff response and erosion susceptibility

The impact of charcoal production on soil hydraulic properties, runoff response and erosion susceptibility were studied in both field and simulation experiments. Core and composite samples, from 12 randomly selected sites within the catchment of Kotokosu were taken from the 0-10 cm layer of a charcoal site soil (CSS) and adjacent field soils (AFS). These samples were used to determine saturated hydraulic conductivity (Ksat), bulk density, total porosity, soil texture and color. Infiltration, surface albedo and soil surface temperature were also measured in both CSS and AFS. Measured properties were used as entries in a rainfall runoff simulation experiment on a smooth (5 % slope) plot of 25 x 25 m grids with 10 cm resolutions. Typical rainfall intensities of the study watershed (high, moderate and low) were applied to five different combinations of Ks distributions that could be expected in this landscape. The results showed significantly (p < 0.01) higher flow characteristics of the soil under charcoal kilns (increase of 88 %). Infiltration was enhanced and runoff volume reduced significantly. The results showed runoff reduction of about 37 and 18 %, and runoff coefficient ranging from 0.47-0.75 and 0.04-0.39 or simulation based on high (200 mm h-1) and moderate (100 mm h-1) rainfall events over the CSS and AFS areas, respectively. Other potential impacts of charcoal production on watershed hydrology were described. The results presented, together with watershed measurements, when available, are expected to enhance understanding of the hydrological responses of ecosystems to indiscriminate charcoal production and related activities in this region.

Evaporation and coarsening dynamics with open boundaries

We present a study of the evaporation dynamics of a substance undergoing a coarsening process. The system is modeled by the Cahn-Hilliard equation with absorbing boundaries. We have found that the dynamics, although of a diffusive nature, is much slower than the usual one without coarsening. Analytical and simulation results are in reasonable agreement.

Evaporation and coarsening dynamics with open boundaries

We present a study of the evaporation dynamics of a substance undergoing a coarsening process. The system is modeled by the Cahn-Hilliard equation with absorbing boundaries. We have found that the dynamics, although of a diffusive nature, is much slower than the usual one without coarsening. Analytical and simulation results are in reasonable agreement.

Hybrid model of a double-fed induction machine and back-to-back converter

This report details the port interconnection of two subsystems: a power electronics subsystem (a back-to-back AC/AC converter (B2B), coupled to a phase of the power grid), and an electromechanical subsystem (a doubly-fed induction machine (DFIM), coupled mechanically to a flywheel and electrically to the power grid and to a local varying load). Both subsystems have been essentially described in previous reports (deliverables D 0.5 and D 4.3.1), although some previously unpublished details are presented here. The B2B is a variable structure system (VSS), due to the presence of control-actuated switches: however from a modelling and simulation, as well as a control-design, point of view, it is sensible to consider modulated transformers (MTF in the bond-graph language) instead of the pairs of complementary switches. The port-Hamiltonian models of both subsystems are presents and coupled through a power-preserving interconnection, and the Hamiltonian description of the whole system is obtained; detailed bond-graphs of all the subsystems and the complete system are provided.

Practical applications of a systematic approach to the chemical abatement of pollutants in water and air

The present dissertation is devoted to the systematic approach to the development of organic toxic and refractory pollutants abatement by chemical decomposition methods in aqueous and gaseous phases. The systematic approach outlines the basic scenario of chemical decomposition process applications with a step-by-step approximation to the most effective result with a predictable outcome for the full-scale application, confirmed by successful experience. The strategy includes the following steps: chemistry studies, reaction kinetic studies in interaction with the mass transfer processes under conditions of different control parameters, contact equipment design and studies, mathematical description of the process for its modelling and simulation, processes integration into treatment technology and its optimisation, and the treatment plant design. The main idea of the systematic approach for oxidation process introduction consists of a search for the most effective combination between the chemical reaction and the treatment device, in which the reaction is supposed to take place. Under this strategy,a knowledge of the reaction pathways, its products, stoichiometry and kinetics is fundamental and, unfortunately, often unavailable from the preliminary knowledge. Therefore, research made in chemistry on novel treatment methods, comprisesnowadays a substantial part of the efforts. Chemical decomposition methods in the aqueous phase include oxidation by ozonation, ozone-associated methods (O3/H2O2, O3/UV, O3/TiO2), Fenton reagent (H2O2/Fe2+/3+) and photocatalytic oxidation (PCO). In the gaseous phase, PCO and catalytic hydrolysis over zero valent ironsare developed. The experimental studies within the described methodology involve aqueous phase oxidation of natural organic matter (NOM) of potable water, phenolic and aromatic amino compounds, ethylene glycol and its derivatives as de-icing agents, and oxygenated motor fuel additives ¿ methyl tert-butyl ether (MTBE) ¿ in leachates and polluted groundwater. Gas-phase chemical decomposition includes PCO of volatile organic compounds and dechlorination of chlorinated methane derivatives. The results of the research summarised here are presented in fifteenattachments (publications and papers submitted for publication and under preparation).

On sliding mode control ofhydraulic servo systems and a manipulator

The aim of the study is to developa novel robust controller based on sliding mode control technique for the hydraulic servo system with flexible load and for a flexible manipulator with the lift and jib hydraulic actuators. For the purpose of general control design, a dynamic model is derived describing the principle physical behavior for both the hydraulic servo system and the flexible hydraulic manipulator. The mechanism of hydraulic servo systems is described by basic mathematical equations of fluid powersystems and the dynamics of flexible manipulator is modeled by the assumed modemethod. The controller is constructed so as to track desired trajectories in the presence of model imprecision. Experimental and simulation results demonstratethat sliding mode control has benefits which can be used to guarantee stabilityin uncertain systems and improve the system performance and load tolerance.

Characterisation of Hydrophobic Nonfibrous Material and Its Removal From Pulp Suspension

Paperin ja kartongin kierrätys lisääntyy taloudellisten intressien ja ympäristöhygieenisten tavoitteiden takia jatkuvasti. Lisääntyvän kierrätyksen myötä myös paperin ja kartongin epäpuhtauksien määrä kasvaa, mikä huonontaa kierrätysraaka-aineen laatua. Tämän työn tarkoituksena on antaa perustietoa eräästä kartongin päällystyksessä käytettävästä hydrofobisesta materiaalista, epäpuhtaan kartongin kierrätyksestä sekä ongelmista, joita epäpuhtaan kartongin kierrätyksestä syntyy. Kierrätyskuidun fraktiointi on yksinkertainen prosessi aallotuskartongin, testilainerin ja taivekartongin valmistuksessa. Kierrätysprosessin ensisijaisia tehtäviä ovat kuidutus ja epäpuhtauksien poisto sekä näiden epäpuhtauksien vaikutusten eliminointi, jotta kierrätysmassan laatuvaatimukset täyttyvät. Lisääntynyt epäpuhtauksien määrä raaka-aineessa asettaa vaatimuksia lajitteluprosessin kehittämiseksi. Nykyaikaisilla kierrätyslaitoksilla ei pystytä käsittelemään ylettömiä määriä epäpuhtauksia. Epäpuhtaudet aiheuttavat ongelmia ajettavuuteen ja heikentävät tuotteen laatua kierrätysprosessissa. Epäpuhtauksien poistoon on olemassa useita teknisiä ratkaisuja, mutta minkään niistä ei ole todettu täysin poistavan kaikkia ongelmia. Työn kokeellisessa osassa kartongin päällystykseen käytettävää hydrofobista materiaalia analysoitiin erilaisin menetelmin. Tutkittiin myös erilaisten olosuhteiden vaikutusta tämän materiaalin poistoon.

Ilmanjaon päätelaitteen virtauskentän mallintaminen

Tässä työssä esitetään tuloilmalaitteen virtausten laskennallinen tarkastelu huonetilassa virtauslaskentaohjelmiston avulla. Tarkastelu suoritetaan kolmiulotteisena sekä isotermisille että termisille tapauksille, jolloin huonetilan joihinkin pintoihin asetetaan lämpövuo ja epäpuhtauslähde. Työn tarkoituksena on arvioida CFX -virtauslaskentaohjelmiston soveltuvuutta huonetilavirtausten mallintamiseen ja tarkastella huonetilan ilmanvaihdon tehokkuutta eri tapauksissa. Arviointi suoritetaan vertaamalla laskentatuloksia mittaustuloksiin. Turbulenssimallien vaikutusta on arvioitu käyttämällä nollan yhtälön ja standardi k-e turbulenssimalleja. CFX:n k-e turbulenssimallilla lasketut nopeuden alenemat eri tilavuusvirroilla vastasivat paremmin mittaustuloksia kuin nollan yhtälön turbulenssimallilla, jolla erot olivat huomattavia. Huonetilan ilmanvaihdon tehokkuus vaihteli suuresti tuloilmalaitteen sijoituspaikan ja lämpövuon mukaan.