Pre-storage of gelified reagents in a lab-on-a-foil system for rapid nucleic acid analysis

Reagent pre-storage in a microfluidic chip can enhance operator convenience, simplify the system design, reduce the cost of storage and shipment, and avoid the risk of cross-contamination. Although dry reagents have long been used in lateral flow immunoassays, they have rarely been used for nucleic acid-based point-of-care (POC) assays due to the lack of reliable techniques to dehydrate and store fragile molecules involved in the reaction. In this study, we describe a simple and efficient method for prolonged on-chip storage of PCR reagents. The method is based on gelification of all reagents required for PCR as a ready-to-use product. The approach was successfully implemented in a lab-on-a-foil system, and the gelification process was automated for mass production. Integration of reagents on-chip by gelification greatly facilitated the development of easy-to-use lab-on-a-chip (LOC) devices for fast and cost-effective POC analysis.

Mechanical characterization of the varian Exact-arm and R-arm support systems for eight aS500 electronic portal imaging devices

The aim of this study is to compare the positioning accuracy at different gantry angles of two electronic portal imaging devices (EPIDs) support arm systems by using EPID difference images as a measure for displacement. This work presents a comparison of the mechanical performance of eight Varian aS500 (Varian Medical Systems, Palo Alto, CA) EPIDs, mounted using either the Varian Exact-arm or R-arm.

Optimization of image quality and dose for Varian aS500 electronic portal imaging devices (EPIDs)

This study was carried out to investigate whether the electronic portal imaging (EPI) acquisition process could be optimized, and as a result tolerance and action levels be set for the PIPSPro QC-3V phantom image quality assessment. The aim of the optimization process was to reduce the dose delivered to the patient while maintaining a clinically acceptable image quality. This is of interest when images are acquired in addition to the planned patient treatment, rather than images being acquired using the treatment field during a patient's treatment. A series of phantoms were used to assess image quality for different acquisition settings relative to the baseline values obtained following acceptance testing. Eight Varian aS500 EPID systems on four matched Varian 600C/D linacs and four matched Varian 2100C/D linacs were compared for consistency of performance and images were acquired at the four main orthogonal gantry angles. Images were acquired using a 6 MV beam operating at 100 MU min(-1) and the low-dose acquisition mode. Doses used in the comparison were measured using a Farmer ionization chamber placed at d(max) in solid water. The results demonstrated that the number of reset frames did not have any influence on the image contrast, but the number of frame averages did. The expected increase in noise with corresponding decrease in contrast was also observed when reducing the number of frame averages. The optimal settings for the low-dose acquisition mode with respect to image quality and dose were found to be one reset frame and three frame averages. All patients at the Northern Ireland Cancer Centre are now imaged using one reset frame and three frame averages in the 6 MV 100 MU min(-1) low-dose acquisition mode. Routine EPID QC contrast tolerance (+/-10) and action (+/-20) levels using the PIPSPro phantom based around expected values of 190 (Varian 600C/D) and 225 (Varian 2100C/D) have been introduced. The dose at dmax from electronic portal imaging has been reduced by approximately 28%, and while the image quality has been reduced, the images produced are still clinically acceptable.

Characterisation of nonlinear distortion and intermodulation in passive devices and antennas

The paper presents a conceptual discussion of the characterisation and phenomenology of passive intermodulation (PIM) by the localised and distributed nonlinearities in passive devices and antennas. The PIM distinctive nature and its impact on signal distortions are examined in comparison with similar effects in power amplifiers. The main features of PIM generation are discussed and illustrated by the example of PIM due to electro-thermal nonlinearity. The issues of measurement, discrimination and modelling of PIM generated by nonlinearities in passive RF components and antennas are addressed.

Mobile Wearable Communications

This special issue provides the latest research and development on wireless mobile wearable communications. According to a report by Juniper Research, the market value of connected wearable devices is expected to reach $1.5 billion by 2014, and the shipment of wearable devices may reach 70 million by 2017. Good examples of wearable devices are the prominent Google Glass and Microsoft HoloLens. As wearable technology is rapidly penetrating our daily life, mobile wearable communication is becoming a new communication paradigm. Mobile wearable device communications create new challenges compared to ordinary sensor networks and short-range communication. In mobile wearable communications, devices communicate with each other in a peer-to-peer fashion or client-server fashion and also communicate with aggregation points (e.g., smartphones, tablets, and gateway nodes). Wearable devices are expected to integrate multiple radio technologies for various applications' needs with small power consumption and low transmission delays. These devices can hence collect, interpret, transmit, and exchange data among supporting components, other wearable devices, and the Internet. Such data are not limited to people's personal biomedical information but also include human-centric social and contextual data. The success of mobile wearable technology depends on communication and networking architectures that support efficient and secure end-to-end information flows. A key design consideration of future wearable devices is the ability to ubiquitously connect to smartphones or the Internet with very low energy consumption. Radio propagation and, accordingly, channel models are also different from those in other existing wireless technologies. A huge number of connected wearable devices require novel big data processing algorithms, efficient storage solutions, cloud-assisted infrastructures, and spectrum-efficient communications technologies.

How Video Lecture Capture affects Student Engagement in a University Computer Programming Course: Attendance, Video Viewing Behaviours and Student Attitudes

Introduction
The use of video capture of lectures in Higher Education is not a recent occurrence with web based learning technologies including digital recording of live lectures becoming increasing commonly offered by universities throughout the world (Holliman and Scanlon, 2004). However in the past decade the increase in technical infrastructural provision including the availability of high speed broadband has increased the potential and use of videoed lecture capture. This had led to a variety of lecture capture formats including pod casting, live streaming or delayed broadcasting of whole or part of lectures.
Additionally in the past five years there has been a significant increase in the popularity of online learning, specifically via Massive Open Online Courses (MOOCs) (Vardi, 2014). One of the key aspects of MOOCs is the simulated recording of lecture like activities. There has been and continues to be much debate on the consequences of the popularity of MOOCs, especially in relation to its potential uses within established University programmes.
There have been a number of studies dedicated to the effects of videoing lectures.
The clustered areas of research in video lecture capture have the following main themes:
• Staff perceptions including attendance, performance of students and staff workload
• Reinforcement versus replacement of lectures
• Improved flexibility of learning
• Facilitating engaging and effective learning experiences
• Student usage, perception and satisfaction
• Facilitating students learning at their own pace
Most of the body of the research has concentrated on student and faculty perceptions, including academic achievement, student attendance and engagement (Johnston et al, 2012).
Generally the research has been positive in review of the benefits of lecture capture for both students and faculty. This perception coupled with technical infrastructure improvements and student demand may well mean that the use of video lecture capture will continue to increase in frequency in the next number of years in tertiary education. However there is a relatively limited amount of research in the effects of lecture capture specifically in the area of computer programming with Watkins 2007 being one of few studies . Video delivery of programming solutions is particularly useful for enabling a lecturer to illustrate the complex decision making processes and iterative nature of the actual code development process (Watkins et al 2007). As such research in this area would appear to be particularly appropriate to help inform debate and future decisions made by policy makers.
Research questions and objectives
The purpose of the research was to investigate how a series of lecture captures (in which the audio of lectures and video of on-screen projected content were recorded) impacted on the delivery and learning of a programme of study in an MSc Software Development course in Queen’s University, Belfast, Northern Ireland. The MSc is conversion programme, intended to take graduates from non-computing primary degrees and upskill them in this area. The research specifically targeted the Java programming module within the course. It also analyses and reports on the empirical data from attendances and various video viewing statistics. In addition, qualitative data was collected from staff and student feedback to help contextualise the quantitative results.
Methodology, Methods and Research Instruments Used
The study was conducted with a cohort of 85 post graduate students taking a compulsory module in Java programming in the first semester of a one year MSc in Software Development. A pre-course survey of students found that 58% preferred to have available videos of “key moments” of lectures rather than whole lectures. A large scale study carried out by Guo concluded that “shorter videos are much more engaging” (Guo 2013). Of concern was the potential for low audience retention for videos of whole lectures.
The lecturers recorded snippets of the lecture directly before or after the actual physical delivery of the lecture, in a quiet environment and then upload the video directly to a closed YouTube channel. These snippets generally concentrated on significant parts of the theory followed by theory related coding demonstration activities and were faithful in replication of the face to face lecture. Generally each lecture was supported by two to three videos of durations ranging from 20 – 30 minutes.
Attendance
The MSc programme has several attendance based modules of which Java Programming was one element. In order to assess the consequence on attendance for the Programming module a control was established. The control used was a Database module which is taken by the same students and runs in the same semester.
Access engagement
The videos were hosted on a closed YouTube channel made available only to the students in the class. The channel had enabled analytics which reported on the following areas for all and for each individual video; views (hits), audience retention, viewing devices / operating systems used and minutes watched.
Student attitudes
Three surveys were taken in regard to investigating student attitudes towards the videoing of lectures. The first was before the start of the programming module, then at the mid-point and subsequently after the programme was complete.
The questions in the first survey were targeted at eliciting student attitudes towards lecture capture before they had experienced it in the programme. The midpoint survey gathered data in relation to how the students were individually using the system up to that point. This included feedback on how many videos an individual had watched, viewing duration, primary reasons for watching and the result on attendance, in addition to probing for comments or suggestions. The final survey on course completion contained questions similar to the midpoint survey but in summative view of the whole video programme.
Conclusions and Outcomes
The study confirmed findings of other such investigations illustrating that there is little or no effect on attendance at lectures. The use of the videos appears to help promote continual learning but they are particularly accessed by students at assessment periods. Students respond positively to the ability to access lectures digitally, as a means of reinforcing learning experiences rather than replacing them. Feedback from students was overwhelmingly positive indicating that the videos benefited their learning. Also there are significant benefits to part recording of lectures rather than recording whole lectures. The behaviour viewing trends analytics suggest that despite the increase in the popularity of online learning via MOOCs and the promotion of video learning on mobile devices in fact in this study the vast majority of students accessed the online videos at home on laptops or desktops However, in part, this is likely due to the nature of the taught subject, that being programming.
The research involved prerecording the lecture in smaller timed units and then uploading for distribution to counteract existing quality issues with recording entire live lectures. However the advancement and consequential improvement in quality of in situ lecture capture equipment may well help negate the need to record elsewhere. The research has also highlighted an area of potentially very significant use for performance analysis and improvement that could have major implications for the quality of teaching. A study of the analytics of the viewings of the videos could well provide a quick response formative feedback mechanism for the lecturer. If a videoed lecture either recorded live or later is a true reflection of the face to face lecture an analysis of the viewing patterns for the video may well reveal trends that correspond with the live delivery.

Heterogeneous error-resilient scheme for spectral analysis in ultra-low power wearable electrocardiogram devices

Wearable devices performing advanced bio-signal analysis algorithms are aimed to foster a revolution in healthcare provision of chronic cardiac diseases. In this context, energy efficiency is of paramount importance, as long-term monitoring must be ensured while relying on a tiny power source. Operating at a scaled supply voltage, just above the threshold voltage, effectively helps in saving substantial energy, but it makes circuits, and especially memories, more prone to errors, threatening the correct execution of algorithms. The use of error detection and correction codes may help to protect the entire memory content, however it incurs in large area and energy overheads which may not be compatible with the tight energy budgets of wearable systems. To cope with this challenge, in this paper we propose to limit the overhead of traditional schemes by selectively detecting and correcting errors only in data highly impacting the end-to-end quality of service of ultra-low power wearable electrocardiogram (ECG) devices. This partition adopts the protection of either significant words or significant bits of each data element, according to the application characteristics (statistical properties of the data in the application buffers), and its impact in determining the output. The proposed heterogeneous error protection scheme in real ECG signals allows substantial energy savings (11% in wearable devices) compared to state-of-the-art approaches, like ECC, in which the whole memory is protected against errors. At the same time, it also results in negligible output quality degradation in the evaluated power spectrum analysis application of ECG signals.

The Use of Audio Podcasts to Enhance the Delivery of a Computer Networks Course

Experience obtained in the support of mobile learning using podcast audio is reported. The paper outlines design, storage and distribution via a web site. An initial evaluation of the uptake of the approach in a final year computing module was undertaken. Audio objects were tailored to meet different pedagogical needs resulting in a repository of persistent glossary terms and disposable audio lectures distributed by podcasting. An aim of our approach is to document the interest from the students, and evaluate the potential of mobile learning for supplementing revision

Scalable semantic aware context storage

In recent years the Internet has grown by incorporating billions of small devices, collecting real-world information and distributing it though various systems. As the number of such devices grows, it becomes increasingly difficult to manage all these new information sources. Several context representation schemes have tried to standardize this information, however none of them have been widely adopted. Instead of proposing yet another context representation scheme, we discuss an efficient way to deal with this diversity of representation schemes. We define the basic requirements for context storage systems, analyse context organizations models and propose a new context storage solution. Our solution implements an organizational model that improves scalability, semantic extraction and minimizes semantic ambiguity.

Discrete Gaussian Sampling for Low-Power Devices

Thesis (Master's)--University of Washington, 2015

Explorador integrado de serviços de armazenamento na cloud: cloud cockpit

Projeto para obtenção do grau de Mestre em Engenharia Informática e de Computadores

Fractional Dynamics of Computer Virus Propagation

We propose a fractional model for computer virus propagation. The model includes the interaction between computers and removable devices. We simulate numerically the model for distinct values of the order of the fractional derivative and for two sets of initial conditions adopted in the literature. We conclude that fractional order systems reveal richer dynamics than the classical integer order counterpart. Therefore, fractional dynamics leads to time responses with super-fast transients and super-slow evolutions towards the steady-state, effects not easily captured by the integer order models.

Fractional Dynamics of Computer Virus Propagation

We propose a fractional model for computer virus propagation. The model includes the interaction between computers and removable devices. We simulate numerically the model for distinct values of the order of the fractional derivative and for two sets of initial conditions adopted in the literature. We conclude that fractional order systems reveal richer dynamics than the classical integer order counterpart. Therefore, fractional dynamics leads to time responses with super-fast transients and super-slow evolutions towards the steady-state, effects not easily captured by the integer order models.

Estudo de Funcionalidades HTML5 para um Editor de Imagem na Internet

Hoje em dia existem múltiplas aplicações multimédia na Internet, sendo comum qualquer website apresentar mais de uma forma de visualização de informação além do texto como, por exemplo: imagens, áudio, vídeo e animação. Com aumento do consumo e utilização de Smartphone e Tablets, o volume de tráfego de internet móvel tem vindo a crescer rapidamente, bem como o acesso à internet através da televisão. As aplicações web-based ganham maior relevância devido à maior partilha ou consumo de conteúdos multimédia, com ou sem edição ou manipulação da mesma, através de redes sociais, como o Facebook. Neste documento é apresentado o estudo de alternativas HTML5 e a implementação duma aplicação web-based no âmbito do Mestrado de Engenharia Informática, ramo de Sistemas Gráficos e Multimédia, no Instituto Superior Engenharia do Porto (ISEP). A aplicação tem como objetivo a edição e manipulação de imagens, tanto em desktop como em dispositivos móveis, sendo este processo exclusivamente feito no lado do cliente, ou seja, no Browser do utilizador. O servidor é usado somente para o armazenamento da aplicação. Durante o desenvolvimento do projeto foi realizado um estudo de soluções de edição e manipulação de imagem existentes no mercado, com a respetiva análise de comparação e apresentadas tecnologias Web modernas como HTML5, CSS3 e JavaScript, que permitirão desenvolver o protótipo. Posteriormente, serão apresentadas, detalhadamente, as várias fases do desenvolvimento de um protótipo, desde a análise do sistema, à apresentação do protótipo e indicação das tecnologias utilizadas. Também serão apresentados os resultados dos inquéritos efetuados a um grupo de pessoas que testaram esse protótipo. Finalmente, descrever-se-á de forma mais exaustiva, a implementação e serão apontadas dificuldades encontradas ao longo do desenvolvimento, bem como indicadas futuras melhorias a introduzir.

Benchmarking therapeutic drug monitoring software: A review of available computer tools

Therapeutic drug monitoring (TDM) aims to optimize treatments by individualizing dosage regimens based on the measurement of blood concentrations. Dosage individualization to maintain concentrations within a target range requires pharmacokinetic and clinical capabilities. Bayesian calculations currently represent the gold standard TDM approach but require computation assistance. In recent decades computer programs have been developed to assist clinicians in this assignment. The aim of this survey was to assess and compare computer tools designed to support TDM clinical activities. The literature and the Internet were searched to identify software. All programs were tested on personal computers. Each program was scored against a standardized grid covering pharmacokinetic relevance, user friendliness, computing aspects, interfacing and storage. A weighting factor was applied to each criterion of the grid to account for its relative importance. To assess the robustness of the software, six representative clinical vignettes were processed through each of them. Altogether, 12 software tools were identified, tested and ranked, representing a comprehensive review of the available software. Numbers of drugs handled by the software vary widely (from two to 180), and eight programs offer users the possibility of adding new drug models based on population pharmacokinetic analyses. Bayesian computation to predict dosage adaptation from blood concentration (a posteriori adjustment) is performed by ten tools, while nine are also able to propose a priori dosage regimens, based only on individual patient covariates such as age, sex and bodyweight. Among those applying Bayesian calculation, MM-USC*PACK© uses the non-parametric approach. The top two programs emerging from this benchmark were MwPharm© and TCIWorks. Most other programs evaluated had good potential while being less sophisticated or less user friendly. Programs vary in complexity and might not fit all healthcare settings. Each software tool must therefore be regarded with respect to the individual needs of hospitals or clinicians. Programs should be easy and fast for routine activities, including for non-experienced users. Computer-assisted TDM is gaining growing interest and should further improve, especially in terms of information system interfacing, user friendliness, data storage capability and report generation.