Tuning the chiro-plasmonic response using high refractive index-dielectric templates

Chiral metamaterials have recently gained attention due to their applicability in developing polarization devices and in the detection of chiral molecules. A common approach towards fabricating plasmonic chiral nanostructures has been decorating metallic nanoparticles on dielectric chiral scaffolds, such as a helix. This resulted in the generation of a large chiro-optical response over a wide range of the electromagnetic spectrum. It has been shown previously that the optical tunability of these chiral metamaterials depends on the geometrical aspects of the overall structure, as well as the nature of the plasmonic constituents. In this study, we have investigated the role of the underlying dielectric scaffold with numerical simulations, and experimentally demonstrated that it is possible to enhance and engineer their chiro-plasmonic response significantly by choosing dielectric scaffolds of appropriate materials.

Separation index of graphs and stacked 2-spheres

In 1987, Kalai proved that stacked spheres of dimension d >= 3 are characterised by the fact that they attain equality in Barnette's celebrated Lower Bound Theorem. This result does not extend to dimension d = 2. In this article, we give a characterisation of stacked 2-spheres using what we call the separation index. Namely, we show that the separation index of a triangulated 2-sphere is maximal if and only if it is stacked. In addition, we prove that, amongst all n-vertex triangulated 2-spheres, the separation index is minimised by some n-vertex flag sphere for n >= 6. Furthermore, we apply this characterisation of stacked 2-spheres to settle the outstanding 3-dimensional case of the Lutz-Sulanke-Swartz conjecture that ``tight-neighbourly triangulated manifolds are tight''. For dimension d >= 4, the conjecture has already been proved by Effenberger following a result of Novik and Swartz. (C) 2015 Elsevier Inc. All rights reserved.

Diffractive Optical Analysis for Refractive Index Sensing using Transparent Phase Gratings

We report the implementation of a micro-patterned, glass-based photonic sensing element that is capable of label-free biosensing. The diffractive optical analyzer is based on the differential response of diffracted orders to bulk as well as surface refractive index changes. The differential read-out suppresses signal drifts and enables time-resolved determination of refractive index changes in the sample cell. A remarkable feature of this device is that under appropriate conditions, the measurement sensitivity of the sensor can be enhanced by more than two orders of magnitude due to interference between multiply reflected diffracted orders. A noise-equivalent limit of detection (LoD) of 6 x 10(-7) was achieved with this technique with scope for further improvement.

A novel index for identification of weak nodes for reactive compensation to improve voltage stability

In this study, a new reactive power loss index (RPLI) is proposed for identification of weak buses in the system. This index is further used for determining the optimal locations for placement of reactive compensation devices in the power system for additional voltage support. The new index is computed from the reactive power support and loss allocation algorithm using Y-bus method for the system under intact condition and as well as critical/severe network contingencies cases. Fuzzy logic approach is used to select the important and critical/severe line contingencies from the contingency list. The inherent characteristics of the reactive power in system operation is properly addressed while determining the reactive power loss allocation to load buses. The proposed index is tested on sample 10-bus equivalent system and 72-bus practical equivalent system of Indian southern region power grid. The validation of the weak buses identification from the proposed index with that from other existing methods in the literature is carried out to demonstrate the effectiveness of the proposed index. Simulation results show that the identification of weak buses in the system from the new RPLI is completely non-iterative, thus requires minimal computational efforts as compared with other existing methods in the literature.

Boron-doped carbon nanoparticles: Size-independent color tunability from red to blue and bioimaging applications

Here, we report the hydrothermal synthesis of boron-doped CNPs (B-CNPs) with different size/atomic percentage of doping and size-independent color tunability from red to blue. The variation of size/atomic percentage of B is achieved by simply varying the reaction time, while the color tunability is obtained by diluting the solution. With dilution, the luminescence spectra are not only blue-shifted, the intensity increases as well. The huge blue-shift in the emission energy (similar to 1 eV) is believed to be due to the increase in the interparticle distance. The quantum yield with optimum dilution is found to increase with boron doping though it is very low as compared to CNPs and nitrogen-doped CNPs. Finally, we show that B-CNPs with a quantum yield of 0.5% can be used for bioimaging applications. (C) 2015 Elsevier Ltd. All rights reserved.

Use of polydispersity index as control parameter to study melting/freezing of Lennard-Jones system: Comparison among predictions of bifurcation theory with Lindemann criterion, inherent structure analysis and Hansen-Verlet rule

Using polydispersity index as an additional order parameter we investigate freezing/melting transition of Lennard-Jones polydisperse systems (with Gaussian polydispersity in size), especially to gain insight into the origin of the terminal polydispersity. The average inherent structure (IS) energy and root mean square displacement (RMSD) of the solid before melting both exhibit quite similar polydispersity dependence including a discontinuity at solid-liquid transition point. Lindemann ratio, obtained from RMSD, is found to be dependent on temperature. At a given number density, there exists a value of polydispersity index (delta (P)) above which no crystalline solid is stable. This transition value of polydispersity(termed as transition polydispersity, delta (P) ) is found to depend strongly on temperature, a feature missed in hard sphere model systems. Additionally, for a particular temperature when number density is increased, delta (P) shifts to higher values. This temperature and number density dependent value of delta (P) saturates surprisingly to a value which is found to be nearly the same for all temperatures, known as terminal polydispersity (delta (TP)). This value (delta (TP) similar to 0.11) is in excellent agreement with the experimental value of 0.12, but differs from hard sphere transition where this limiting value is only 0.048. Terminal polydispersity (delta (TP)) thus has a quasiuniversal character. Interestingly, the bifurcation diagram obtained from non-linear integral equation theories of freezing seems to provide an explanation of the existence of unique terminal polydispersity in polydisperse systems. Global bond orientational order parameter is calculated to obtain further insights into mechanism for melting.

Evaluation of the Index-Flood Approach Related Regional Frequency Analysis Procedures

Index-flood related regional frequency analysis (RFA) procedures are in use by hydrologists to estimate design quantiles of hydrological extreme events at data sparse/ungauged locations in river basins. There is a dearth of attempts to establish which among those procedures is better for RFA in the L-moment framework. This paper evaluates the performance of the conventional index flood (CIF), the logarithmic index flood (LIF), and two variants of the population index flood (PIF) procedures in estimating flood quantiles for ungauged locations by Monte Carlo simulation experiments and a case study on watersheds in Indiana in the U.S. To evaluate the PIF procedure, L-moment formulations are developed for implementing the procedure in situations where the regional frequency distribution (RFD) is the generalized logistic (GLO), generalized Pareto (GPA), generalized normal (GNO) or Pearson type III (PE3), as those formulations are unavailable. Results indicate that one of the variants of the PIF procedure, which utilizes the regional information on the first two L-moments is more effective than the CIF and LIF procedures. The improvement in quantile estimation using the variant of PIF procedure as compared with the CIF procedure is significant when the RFD is a generalized extreme value, GLO, GNO, or PE3, and marginal when it is GPA. (C) 2015 American Society of Civil Engineers.

YIn0.9Mn0.1O3-ZnO nano-pigment exhibiting intense blue color with impressive solar reflectance

The current study reports on the synthesis and characterization of a new inorganic nano-pigment with an intense blue color and high solar radiation reflective properties (70%). The nano-pigment YIn0.9Mn0.1O3-ZnO was synthesized by a sol-gel combustion method and characterized with the aid of X-Ray diffraction, Raman spectroscopy, Magnetic susceptibility, Transmission electron microscopy, UV ndash;vis-NIR diffuse reflectance spectroscopy and CIE-1976 L*a*b* color measurements. The Rietveld refinement of the XRD patterns of the developed nano-pigment disclosed the existence of YIn0.9Mn0.1O3 and ZnO in a 1:1 ratio with hexagonal crystal structures. For comparison, YIn0.9Mn0.1O3 was also synthesized by the sol gel combustion route and its optical properties compared with that of YIn0.9Mn0.1O3-ZnO. It is interesting to note that the developed YIn0.9Mn0.1O3-ZnO nano-pigmeht exhibits superior blue hue (b* = -40.55) and solar reflectance (R* = 70%) values as compared to the YIn0.9Mn0.1O3 nano-pigment (b* = -22.28, R* = 50%). Most importantly, the potential utility of the nano-pigment as a ``Cool Pigment'' was demonstrated by coating onto roofing materials like aluminum roofing sheets. (C) 2015 Elsevier Ltd. All rights reserved.

Electromagnetic analysis of novel class of multiple core/multiple clad step index single mode optical fiber by analytical means

General propagation properties and universal curves are given for double clad single mode fibers with inner cladding index higher or lower than the outer cladding index, using the parameter: inner cladding/core radii ratio. Mode cut-off conditions are also examined for the cases. It is shown that dispersion properties largely differ from the single clad single mode fiber case, leading to large new possibilities for extension of single mode operation for large wavelength tange. Paper demonstrates that how substantially we can extend the single mode operation range by using the raised inner cladding fiber. Throughout we have applied our own computations technique to find out the eigenvalue for a given modes. Detail derivations with all trivial mathematics for eigenmode equation are derived for each case. Paper also demonstrates that there is not much use of using depressed inner cladding fiber. We have also concluded that using the large inner cladding/inner core radius we can significantly increase the single mode operation range for the large wavelength region. (C) 2015 Elsevier GmbH. All rights reserved.

The Heterogeneous Growth of P(3MeTh)--An Ellipsometric Study

Successive thicker P(3MeTh) layers are analysed by ex situ conventional and imaging ellipsometry. Thin films display a smooth surface, are compact and homogeneous while for a growth charge above 20 mC cm(-2) the polymer structure modifies to a still uniform but less dense layer. A two-layer model is used and a mathematical procedure is developed to obtain, simultaneously, from the experimental ellipsometric parameters, Delta and Psi, the thickness and the complex refractive index of P(3MeTh) films grown up to 80 mC cm(-2). Thicker polymer layers are disordered and present a high degree of surface roughness. 

Refractive index and thickness analysis of natural silicon dioxide film growing on silicon with variable-angle spectroscopic ellipsometry

The refractive index and thickness of SiO2 thin films naturally grown on Si substrates were determined simultaneously within the wavelength range of 220-1100 nm with variable-angle spectroscopic ellipsometry. Different angles of incidence and wavelength ranges were chosen to enhance the analysis sensitivity for more accurate results. Several optical models describing the practical SiO2-Si system were investigated, and best results were obtained with the optical model, including an interface layer between SiO2 and Si, which proved the existence of the interface layer in this work as described in other publications.

Evaluación preliminar de sesenta y tres lineas avanzadas de frijol común (Phaseolus vulgaris L.) de grano color negro en la Estación Experimental La Compañía, Carazo

El experimento fue establecido en la estación experimental “La Compañía”, San Marcos, Departamento de Carazo, Nicaragua, durante la época de postrera (Octubre-Diciembre) de 2003, con los objetivos de identificar genotipos de frijol común (Phaseolus vulgaris L) con mejores resultados en cuanto a rendimiento, evaluar las principales características fenológicas y determinar la incidencia y severidad de las principales enfermedades. Las líneas estudiadas provienen del vivero de adaptación centroamericano de grano negro (VIDAC-Negro-2003). Se utilizó un testigo, la variedad Guaymí; el diseño empleado fue el de ensayo preliminar, el cual consistió en un surco por línea de 3m de longitud con el testigo intercalado cada 9 surcos. Los análisis estadísticos realizados a los datos fueron: media, desviación estándar, coeficiente de variación, distribución de frecuencias y correlaciones Pearson. Entre los caracteres evaluados se midieron 13 variables, 3 sobre fenología, hábito de crecimiento, cinco sobre el rendimiento y sus componentes y enfermedades, entre las cuales se evaluaron mustia hilachosa y mancha de la hoja. Se observaron amplios rangos de comportamiento sobre fenología, rendimiento y sus componentes y enfermedades. Respecto a las variables fenológicas se observaron rangos de 33 a 40 dds en el número de días a floración, los días a madurez fisiológica oscilaron entre 63 y 72 dds y los días a cosecha entre 70 y 83 dds. Respecto al hábito de crecimiento las líneas fueron en su totalidad indeterminadas (IIa y IIb), en su mayoría IIb. En cuanto a los componentes del rendimiento el número de vainas por planta osciló entre 1 y 15.6, el número de granos por vaina entre 3.1 y 6.5, las plantas cosechadas entre 8 y 40 y el peso de 100 granos entre 12.31 y 30.25 g. Respecto al rendimiento relativo osciló entre 7.86205.88 %, encontrándose 15 líneas que superaron al testigo. La mayoría de los materiales presentaron severidad a mustia hilachosa con valores de 1 a 6, para mancha de la hoja la severidad osciló entre 2 y 5.

Caracterización y evaluación de siete genotipos de frijol común grano color rojo (Phaseolus vulgaris L.) en la Estación Experimental La Compañía, Carazo, 2004-2005

El presente ensayo se realizó en el centro experimental La Compañía, San Marcos Departamento de Carazo, Nicaragua en la época de primera (junio–agosto del 2004), con el fín de caracterizar y evaluar el comportamiento de 7 genotipos de frijol rojo, proporcionadas por el Programa Internacional de Viveros de Adaptación y Rendimiento, del Centro Internacional de Agricultura Tropical (CIAT) , en coordinación con el Instituto Nicaragüense de Tecnología Agropecuaria (INTA). Fue establecido un diseño de bloques completamente al azar con tres repeticiones; el tamaño de la muestra fue de 10 plantas para caracteres cuantitativos y para los cualitativos se basó en el aspecto de predominancia de caracteres. Se realizó el análisis de varianza y la separación de medias por Tukey al 95% de confianza para las variables del rendimiento y sus componentes; así como la media, desviación estándar y coeficiente de variación para caracteres relacionados al desarrollo y crecimiento. Fueron evaluados 18 caracteres cuantitativos y 15 cu alitativos. De acuerdo con los resultados la semilla se clasificó como pequeña, con forma ovoidea, alargada ovoidea y arriñonada recta en el lado del hilo, esta última con mayor frecuencia; el grano presentó color, rojo claro con testa brillante y rojo marrón oscuro con testa intermedio, predominan do el color rojo claro con testa brillante. Los análisis estadísticos indican que solo dos genotipos difirieron estadísticamente en cuanto al rendimiento, obteniendo el mayor valor el SRC 1-12-1-43 con 2203.9 kg ha -1 , no mostrando diferencias estadísticas las demás variables relacionadas. Todos los genotipos mostraron hábito de crecimiento arbustivo indeterminado (IIb). Respecto a las variables fenológicas se observaron rangos de 36 a 38 dds para el número de días a floración, los días a madurez fisiológica oscilaron entre 62 y 68 dds y los días a cosecha entre 66 y 72 dds, ubicándose de esta manera como materiales precoces. Todos los materiales presentaron daños de las enfermedades mustia hilachosa ( Thanatephorus cucumeris Frank) y mancha angular ( Isariopsis griseola Sacc) con niveles de severidad intermedia con excepción de los genotipos SRC 1-12-1-43 y MPN 103-25, que mostraron susceptibilidad a la mustia hilachosa; sin embargo estos alcanzaron los mayores rendimientos.

Evaluación de dieciseis genotipos de frijol comun de color negro (Phaseolus vulgaris, L.) en epoca de apante, Yasica Sur, San Ramón, Matagalpa

El presente ensayo se realizó en Yasica Sur, San Ramón, Matagalpa, en época de apante del 23 de Noviembre del 2002 al 24 de Febrero del 2003, con el objetivo de evaluar el comportamiento agronómico de 16 genotipos de fríjol común de grano color negro (Phaseolus vulgaris L.) a las condiciones de la localidad, a fin de encontrar alternativas de materiales genéticos para pequeños y medianos productores de frijol común. Para el estudio se utilizó un diseño experimental unífactorial en bloques completos al azar (B.C.A) con 4 repeticiones y 16 tratamientos. Los resultados de campo se procesaron mediante el programa sistema análisis estadístico (SAS V.8), la prueba de rango múltiple de Tukey al 0.01 por ciento de error para las variables evaluadas y correlación de Person para las mismas variables. Con base en los datos obtenidos se puede afirmarque, los componentes del rendimiento grano por vainas, vainas plantas y peso de 100 granos presentaron diferencias significativas; sin embargo, la variable del rendimiento de los genotipos no muestra diferencias significativas entre sí. El análisis de correlación múltiple efectuado a las variables fenológicas mostró diferencias significativas en días a flor, madurez fisiológica y días a cosechas. Los principales hábitos de crecimiento que se presentaron entre los materiales fueron indeterminados IIb y IIIb, a diferencia del genotipo B2059 con hábito indeterminado Ib. Los genotipos evaluados con relación a enfermedades fúngicas mostraron resistencia a Roya (Uromyces appendiculatus. Pers.Unger.), Mancha angular (Isariopsis griseolas Sacc) y Tizón bacteriano o bacteriosis común (Xanthomonas campestrispv.phaseoli). .