966 resultados para Clinical Significance
Resumo:
O termo Habilidades Sociais (HS) é usado para designar um conjunto de repertórios comportamentais que envolvem interações sociais satisfatórias. A maioria dos estudos publicados sobre essa temática inclui a participação de crianças e adolescentes, abordando situações em ambiente escolar. Poucos são os estudos voltados para a área de saúde, e, até o momento, não foram localizadas pesquisas sobre HS realizadas com indivíduos portadores de Anomalia da Diferenciação Sexual (ADS). Esta anomalia se caracteriza pela malformação na genitália e/ou pela disfunção das gônadas, ocasionando características sexuais secundárias não correspondentes ao sexo de criação. Estudos clínicos realizados com indivíduos portadores de ADS têm destacado a ocorrência de déficits em habilidades sociais nesses indivíduos, caracterizados pela fuga-esquiva de situações sociais aversivas. Neste trabalho, pretendeu-se caracterizar o repertório comportamental correspondente a HS em indivíduos com ADS atendidos no ambulatório de um programa especializado de um hospital da rede pública de Belém, por meio de dois estudos complementares. No primeiro, foi realizado um estudo com delineamento transversal, com o objetivo de caracterizar comportamentos correspondentes a HS em indivíduos com ADS. Participaram 9 adultos com mais de seis meses em tratamento. Foram utilizados: Roteiro de Entrevista, Protocolo para análise de prontuário e Inventário de Habilidades Sociais - IHS. Os resultados sugerem que os participantes apresentam déficit de habilidades sociais em todos os fatores do IHS em menor ou maior grau, de maneira que poderiam se beneficiar com um treinamento de habilidades sociais como parte do tratamento, por se tratar de uma técnica que visa à superação e/ou redução dos déficits por eles apresentados. No segundo, foi realizado um estudo com delineamento de sujeito único, com o objetivo de verificar os efeitos do uso de treino em automonitoramento na instalação de comportamentos correspondentes a HS. Participou uma adulta com diagnóstico de ADS selecionada dentre os que participaram do Estudo 1. O procedimento de intervenção ocorreu por meio de entrevistas semanais, de acordo com as seguintes etapas: (1) Contrato: assinatura do Termo de Consentimento Livre e Esclarecido e agendamento de entrevista; (2) Avaliação: levantamento da linha de base dos comportamentos correspondentes à HS, elaboração da hierarquia dos comportamentos que indicaram déficit segundo as normas de análise do IHS e treino em registro de automonitoração; (3) Intervenção: leitura de um texto sobre habilidades sociais, apresentação da lista de direitos humanos básicos, aplicação do Questionário Construcional de Goldiamond adaptado e treino em registro de automonitoramento; (4) Re-avaliação das HS: reaplicação do IHS; (5) Follow-up: avaliação da manutenção dos ganhos obtidos com o estudo; e (6) Encerramento: entrevista devolutiva para explanação dos resultados do estudo ao participante. Os resultados sugerem que a intervenção promoveu o desenvolvimento de HS na participante, haja vista a interpretação da evolução da participante apresentada de acordo com a variação do Escore Z e da representação gráfica de significância clínica e mudança confiável.
Resumo:
BackgroundAcute pulmonary embolism (PE) is a common cause of death, accounting for 50,000 to 200,000 deaths annually. It is the third most common cause of mortality among the cardiovascular diseases, after coronary artery disease and stroke.The advent of multi-detector computed tomographic pulmonary angiography (CTPA) has allowed better assessment of PE regarding visualisation of the peripheral pulmonary arteries, increasing its rate of diagnosis. More cases of peripheral PEs, such as isolated subsegmental PE (SSPE) and incidental PE, have thereby been identified. These two conditions are usually found in patients with few or none of the classic PE symptoms such as haemoptysis or pleuritic pain, acute dyspnoea or circulatory collapse. However, in patients with reduced cardio-pulmonary (C/P) reserve the classic PE symptoms can be found with isolated SSPEs. Incidental SSPE is found casually in asymptomatic patients, usually by diagnostic imaging performed for other reasons (for example routine CT for cancer staging in oncologic patients).Traditionally, all PEs are anticoagulated in a similar manner independent of the location, number and size of the thrombi. It has been suggested that many patients with SSPE may be treated without benefit, increasing adverse events by possible unnecessary use of anticoagulants.Patients with isolated SSPE or incidental PE may have a more benign clinical presentation compared with those with proximal PEs. However, the clinical significance in patients and their prognosis have to be studied to evaluate whether anticoagulation therapy is required.ObjectivesTo assess the effectiveness and safety of anticoagulation therapy versus no intervention in patients with isolated subsegmental pulmonary embolism (SSPE) or incidental SSPE.Search methodsThe Cochrane Peripheral Vascular Diseases Group Trials Search Co-ordinator searched the Specialised Register (last searched October 2013) and CENTRAL (2013, Issue 9). MEDLINE, EMBASE, LILACS and clinical trials databases were also searched (October 2013).Selection criteriaRandomised controlled trials of anticoagulation therapy versus no intervention in patients with SSPE or incidental SSPE.Data collection and analysisTwo review authors inspected all citations to ensure reliable selection. We planned for two review authors to independently extract data and to assess the methodological quality of identified trials using the criteria recommended in the Cochrane Handbook for Systematic Reviews of Interventions.Main resultsNo studies were identified that met the inclusion criteria.Authors' conclusionsThere is no randomised controlled trial evidence for the effectiveness and safety of anticoagulation therapy versus no intervention in patients with isolated subsegmental pulmonary embolism (SSPE) or incidental SSPE, and therefore we can not draw any conclusions. Well-conducted research is required before informed practice decisions can be made.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objectives: This in vitro study assessed the effect of milk containing different fluoride concentrations on tooth erosion.Methods: Bovine enamel and root dentine specimens were treated with: (1) bovine whole milk with 0 ppmF; (2) 2.5 ppm F; (3) 5 ppmF;(4) 10 ppmF (all after erosion); (5) whole milk with 0 ppm F (before erosion); (6) NaF (0.05% F, positive control, after erosion) or (7) 0.9% NaCl (negative control, after erosion). The specimens were submitted to pH cycles (4 x 90 s in soft drink) and treatments for 5 days. The specimens were immersed in the treatment solutions for 1 min(only at the first cycle each day) with further exposition to 1: 1 milk: saliva slurry for 10 min. The tooth loss was measured using a contact profilometer and statistically analysed (p < 0.05).Results: Rinsing with milk before erosive challenge significantly reduced tooth loss compared to negative control (67% and 24% reduction in dentine and enamel loss, respectively) and to milk after erosive challenge, only for dentine. The addition of fluoride to milk also reduced tooth loss compared to negative control, but with no significant differences among fluoride concentrations for enamel and dentine (mu m), respectively: 0 ppm (3.63 +/- 0.04 and 2.51 +/- 0.53), 2.5 ppm F (2.86 +/- 0.42 and 1.96 +/- 0.47), 5 ppm F (2.81 +/- 0.27 and 1.77 +/- 0.44), 10 ppm F (2.03 +/- 0.49 and 1.68 +/- 0.59). There was a negative and significant correlation between [F] and the tooth loss.Conclusions: Daily rinse with milk containing F is able to reduce both enamel and dentine erosion in vitro.Clinical significance: Since the prevalence of dental erosion is steadily increasing, rinse with milk or its derivate might be an important strategy to reduce the progression of tooth erosion. (C) 2013 Elsevier Ltd. All rights reserved.
Resumo:
Objectives: The aim of this study was to evaluate the anticaries effect of low-fluoride toothpastes combined with hexametaphosphate (HMP) on enamel demineralization.Methods: Bovine enamel blocks were subjected to pH cycling and treatment with toothpaste's slurries (15 groups; 2x/day). Toothpaste mixtures contained the following: no fluoride (F) plus HMP (from 0 to 3.0%); 250 ppm F plus HMP (from 0 to 3.0%); 500 ppm F; 1100 ppm F; and a commercial toothpaste (1100 ppm F). After pH cycling, surface and cross-sectional hardness, as well as F present in the enamel were determined. The demineralization depth was analyzed using polarized light microscopy. The variables were subjected to 1-way ANOVA, followed by Student-Newman-Keuls' test (p < 0.05).Results: In the absence of fluoride, 0.5% HMP promoted the lowest mineral loss and its effect was similar to that of a 250 ppm F toothpaste (p > 0.05). The combination of 0.5% HMP and 250 ppm F resulted in lower mineral loss (p < 0.05) and similar lesion depth when compared to the 1100 ppm F toothpaste (p > 0.05).Conclusion: To conclude, the combination of 0.5% HMP and 250 ppm fluoride in a toothpaste has a similar inhibitory effect on enamel demineralization in vitro when compared to a toothpaste containing 1100 ppm F.Clinical significance: The anticaries effect of toothpaste containing 250 ppm F combined with 0.5% HMP was similar to that of a 1100 ppm F toothpaste, despite the 4-fold difference in F concentration. Although such effects still need to be demonstrated in clinical studies, it may be a viable alternative for preschool children. (C) 2013 Elsevier Ltd. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objectives: To determine the marginal adaptation of bulk-fill composites in class II MO cavities.Methods: Standardized class II MO cavities with bevelled enamel margins were prepared in 40 extracted human molars. The teeth were randomly assigned to one of the five experimental groups (n = 8). The teeth were restored with two horizontal increments of composite (4 mm and 2 mm thickness). The experimental groups were (1st/2nd increment): Gr. A - Venus Bulk-Fill/Venus Diamond; Gr. B - Tetric EvoCeram BulkFill/Tetric EvoCeram; Gr. C - Surefil SDR/Ceram-X; Gr. D - SonicFill; Gr. E - Ceram-X/Ceram-X (control). After finishing procedures, impressions were made using a polyvinyl siloxane and epoxy resin replicas were obtained. Thermo-mechanical stressing was carried out 24 h after the restorative procedure. All specimens were submitted to 240,000 occlusal loading and simultaneous 600 thermal cycles in water at 5 degrees C and 50 degrees C. After loading, a new set of epoxy resin replicas was obtained. Scanning electron microscopy was carried out at 200x magnification. Results for the marginal adaptation were expressed as percentages of continuity relative to the exposed interface and analyzed by ANOVA and Duncan post hoc test (p < 0.05).Results: In enamel, no significant differences were detected before and after thermo-mechanical loading between groups. In dentine, the worst results were observed in Gr. A.Conclusion: By applying simple layering techniques, bulk-fill materials do not allow better marginal adaptation than a standard composite. Clinical significance: A new class of resin-base composite (bulk-fill) was recently launched on the market. The bulk-fill composites exhibited adequate marginal adaptation and similar to the results of the standard composite. (C) 2014 Elsevier Ltd. All rights reserved.
Resumo:
Background. Reduced surface tension of liquids results in higher surface wetting ability and diffusivity by the substrate. Objectives. The objective of this study was to evaluate the influence of the Grander Technology in reducing the surface tension of adhesive systems. Methods. Two adhesive systems (self-etch and total-etch) were modified by physical contact with the Grander system Flexible unit to revitalize water, for 48 h. Surface tension of adhesive systems and water in normal and grander-modified conditions was measured with a goniometer. Results. The results showed a reduction of surface tension for all conditions grander-modified between 3-15%. Conclusions. Grander Technology was effective in reducing the surface tension of the Single Bond and Clearfil SE Bond adhesive systems. Clinical significance. Grander technology was employed to restructure the molecular structure of water-based adhesive systems, which can increase their wetness capacity and therefore ensure a greater diffusibility.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Purpose: This study aimed to investigate the influence of ceramic thickness and shade on the Knoop hardness and dynamic elastic modulus of a dual-cured resin cement.Materials and Methods: Six ceramic shades (Bleaching, A1, A2, A3, A3.5, B3) and two ceramic thicknesses (1 mm, 3 mm) were evaluated. Disk specimens (diameter: 7 mm; thickness: 2 mm) of the resin cement were light cured under a ceramic block. Light-cured specimens without the ceramic block at distances of 1 and 3mm were also produced. The Knoop hardness number (KHN), density, and dynamic Young's moduli were determined. Statistical analysis was conducted using ANOVA and a Tukey B rank order test (p = 0.05).Results: The bleaching 1-mm-thick group exhibited significantly higher dynamic Young's modulus. Lower dynamic Young's moduli were observed for the 3-mm-thick ceramic groups compared to bleaching 3-mm-thick group, and no difference was found among the other 3-mm groups. For the KHN, when A3.5 3-mm-thick was used, the KHN was significantly lower than bleaching and A1 1-mm-thick ceramic; however, no difference was exhibited between the thicknesses of the same shade.Conclusions: The dual-cured resin cement studied irradiated through the 1-mm-thick ceramic with the lightest shade (bleaching ceramic) exhibited a better elastic modulus, and there was no effect in KHN of the resin cement when light cured under different ceramic shades and thicknesses (1 and 3 mm), except when the A3.5 3-mm-thick ceramic was used.Clinical Significance: Variolink II irradiated through ceramic with the lowest chroma exhibited the highest elastic modulus; therefore, the light activation method might not be the same for all clinical situations.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Protrusion of the intervertebral disc can cause chronic progressive compression of the spinal cord, and the neurological associated signs vary according to anatomical location, duration and dynamic force of compression. The type II disc disease is not fully understood, and there are many controversies about is clinical significance and best form of treatment. The most important aspect of conservative treatment is rest and physiotherapy associated with mild exercise, and use of corticosteroids to reduce vasogenic edema. The spinal decompression by surgery for removal of disc material from within the medullary canal is the surgical treatment of choice in type I disc disease, but has technical limitations in the type II disc disease. The purpose of this paper is to review the pathophysiology and treatment of chronic intervertebral disc disease and discuss the controversies in medical treatment and the use of some traditional and new surgical techniques.