Development of the SORRI-BAURU posterior walker

This study aimed to report on the design and development of a low cost Reverse Walker through a participative development cycle with people undergoing rehabilitation. The creation and fundamentals of the concept are described, as well as the development of prototypes and their provision to subjects with mobility problems. The Reverse Walker benefits the user by promoting a more upright posture and favoring the development of postural balance. Enhancing the mobility of people with disabilities may benefit their independence, social participation and quality of life.

Chromatic stability of acrylic resins of artificial eyes submitted to the accelerated aging and polishing

Esthetics and durability of materials used to fabricate artificial eyes has been an important issue since artificial eyes are essential to restore esthetics and function, protect the remaining tissues and help with patients' psychological therapy. However, these materials are submitted to degrading effects of environmental agents on the physical properties of the acrylic resin. OBJECTIVE: This study assessed the color stability of acrylic resins used to fabricate sclera in three basic shades (N1, N2 and N3) when subjected to accelerated aging, mechanical and chemical polishing. MATERIAL AND METHODS: Specimens of each resin were fabricated and submitted to mechanical and chemical polishing. Chromatic analysis was performed before and after accelerated aging through ultraviolet reflection spectrophotometry. RESULTS: All specimens revealed color alteration following polishing and accelerated aging. The resins presented statistically significant chromatic alteration (p<0.01) between the periods of 252 and 1008 h. CONCLUSIONS: Both polishing methods presented no significant difference between the values of color derivatives of resins.

Effect of weathering and thickness on the opacity of acrylic resin and ocular button for artificial eyes

The aim of this study was to evaluate the opacity of the polymethylmethacrylate for ocular prosthesis using an ocular button, a colorless resin for the ocular prostheses, and 4 brands of acrylic colorless resin in the function of weathering (0, 504, or 1008 h) and thickness (1 and 3.5 mm). One hundred twenty specimens were confectioned (made) and allocated into 12 groups (n = 10). Opacity analysis was carried out with a spectrophotometer of visible ultraviolet reflection before and after weathering by 504 and 1008 hours. Data for the opacity were expressed in ΔE. Data were then analyzed statistically by analysis of variance and the Tukey test (P < 0.01). The data demonstrated statistically significant differences; manufactured ocular button (ΔE = 47.4) and the resin Vipi Cril (ΔE = 38.11) presented greater and minor values of opacity, respectively. The weathering showed statistical difference among times (0 h, ΔE = 36.32; 504 h, ΔE = 39.98; and 1008 h, ΔE = 43.9). Ocular button and evaluated resins presented greater values of opacity when presented in 3.5 mm in thickness. The values of opacity increased with the progression of the time of weathering, independent of the evaluated material and the thickness.

Cryptococcus: isolamento ambiental e caracterização bioquímica

Cryptococcosis is an opportunistic fungal infection caused by Cryptococcus yeasts, especially C. neoformans and Cryptococcus gattii. The fungus is found in substrates of animal and vegetable origin, and infection occurs through inhalation and seedlings present in the environment. The present study aimed to investigate the existence of microfocus Cryptococcus sp. from the environmental samples of Araçatuba city, São Paulo, featuring new niches, by decoupling the direct relationship between fungus and host in order to minimize the risk of contamination of man and animals, understanding the ecoepidemiology of Cryptococcus. Fifty samples from hollows and tree trunks were harvested (Cassia sp., Ficus sp., Caesalpinea peltophorides) from ten representatives in the urban perimeter. The samples were immediately sent to the Laboratory of Bacteriology and Mycology, Faculty of Veterinary Medicine Araçatuba - Unesp where they were processed and plated on Petri dishes containing agar seed Niger and Sabouraud dextrose agar with chloramphenicol, incubated at 30ºC for a period of no less than 5 days. Afterwards they were subimitted to biochemical tests: urease production, thermotolerance at 37°C and quimiotipagem in CGB agar (L- Canavanine-Glycine-Bromothymol blue). The results showed that 17 (34%) cultures were positive for Cryptococcus, 9 (18%) for Cryptococcus gattii and 8 (16%) for Cryptococcus neoformans. Other yeast correlated as Rhodotorula sp. and Candida sp. were isolated. We conclude that the infectious propagules of Cryptococcus are dispersed in nature and constitute an environmental microfocus, not necessarily being bound to a single host.

Undergraduate Scholarship in the College of Arts and Sciences 2006 Book of Abstracts

The College of Arts and Sciences proudly presents our fourth issue of Undergraduate Scholarship in the College of Arts and Sciences: Book of Abstracts, which highlights the work conducted by students in collaboration with faculty mentors. This collection of abstracts represents many hours of scholarly activity in which students further developed their research, critical thinking, and writing skills and engaged in learning well beyond the classroom.

Refuge Update – July/August 2004, Volume 1, Number 4

Table of Contents: Historic Voyage through Hawaiian Islands, page 8 Focus on Fire Management, page 10-17 A Circle of Trees, page 19 First Friends in Montana, page 22

State of the Arctic October 2006

This State of the Arctic Report presents a review of recent data by an international group of scientists who developed a consensus on the information content and reliability. The report highlights data primarily from 2000 to 2005 with a first look at winter 2006, providing an update to some of the records of physical processes discussed in the Arctic Climate Impact Assessment (ACIA, 2004, 2005). Of particular note: • Atmospheric climate patterns are shifting (Fig. 1). The late winter/spring pattern for 2000–2005 had new hot spots in northeast Canada and the East Siberian Sea relative to 1980–1999. Late winter 2006, however, shows a return to earlier climate patterns, with warm temperatures in the extended region near Svalbard. • Ocean salinity and temperature profiles at the North Pole and in the Beaufort Sea, which changed abruptly in the 1990s, show that conditions since 2000 have relaxed toward the pre-1990 climatology, although 2001–2004 has seen an increase in northward ocean heat transport through Bering Strait (Fig. 2), which is thought to impact sea ice loss. • Sea ice extent continues to decrease. The sea ice extent in September 2005 was the minimum observed in summer during the satellite era (beginning in 1979), marking an unprecedented series of extreme ice extent minima beginning in 2002 (Fig. 3). The sea ice extent in March 2006 was also the minimum observed in winter during the satellite era. • Tundra vegetation greenness increased, primarily due to an increase in the abundance of shrubs. Boreal forest vegetation greenness decreased, possibly due to drought conditions (Fig. 4). • There is increasing interest in the stability of the Greenland ice sheet. The velocity of outlet glaciers increased in 2005 relative to 2000 and 1995, but uncertainty remains with regard to the total mass balance. • Permafrost temperatures continue to increase. However, data on changes in the active layer thickness (the relatively thin layer of ground between the surface and permafrost that undergoes seasonal freezing and thawing) are less conclusive. While some of the sites show a barely noticeable increasing trend in the thickness of the active layer, most of them do not. • Globally, 2005 was the warmest year in the instrumental record (beginning in 1880), with the Arctic providing a large contribution toward this increase. Many of the trends documented in the ACIA are continuing, but some are not. Taken collectively, the observations presented in this report indicate that during 2000–2005 the Arctic system showed signs of continued warming. However, there are a few indications that certain elements may be recovering and returning to recent climatological norms (for example, the central Arctic Ocean and some wind patterns). These mixed tendencies further illustrate the sensitivity and complexity of the Arctic physical system. They underline the importance of maintaining and expanding efforts to observe and better understand this important component of the climate system to provide accurate predictions of its future state.

NUMERICAL AND ANALYTICAL VERIFICATION OF A MULTISCALE COMPUTATIONAL MODEL FOR IMPACT PROBLEMS IN HETEROGENEOUS VISCOELASTIC MATERIALS WITH EVOLVING DAMAGE

Composites are engineered materials that take advantage of the particular properties of each of its two or more constituents. They are designed to be stronger, lighter and to last longer which can lead to the creation of safer protection gear, more fuel efficient transportation methods and more affordable materials, among other examples. This thesis proposes a numerical and analytical verification of an in-house developed multiscale model for predicting the mechanical behavior of composite materials with various configurations subjected to impact loading. This verification is done by comparing the results obtained with analytical and numerical solutions with the results found when using the model. The model takes into account the heterogeneity of the materials that can only be noticed at smaller length scales, based on the fundamental structural properties of each of the composite’s constituents. This model can potentially reduce or eliminate the need of costly and time consuming experiments that are necessary for material characterization since it relies strictly upon the fundamental structural properties of each of the composite’s constituents. The results from simulations using the multiscale model were compared against results from direct simulations using over-killed meshes, which considered all heterogeneities explicitly in the global scale, indicating that the model is an accurate and fast tool to model composites under impact loads. Advisor: David H. Allen

Writing in the Mathematics Classroom: Does It Have an Effect on Students’ Mathematical Reasoning?

In this action research study of my classroom of 5th grade mathematics, I investigate how to improve students’ written explanations to and reasoning of math problems. For this, I look at journal writing, dialogue, and collaborative grouping and its effects on students’ conceptual understanding of the mathematics. In particular, I look at its effects on students’ written explanations to various math problems throughout the semester. Throughout the study students worked on math problems in cooperative groups and then shared their solutions with classmates. Along with this I focus on the dialogue that occurred during these interactions and whether and how it moved students to a deeper level of conceptual understanding. Students also wrote responses about their learning in a weekly math journal. The purpose of this journal is two-fold. One is to have students write out their ideas. Second, is for me to provide the students with feedback on their responses. My research reveals that the integration of collaborative grouping, journaling, and active dialogue between students and teacher helps students develop a deeper understanding of mathematics concepts as well as an increase in their confidence as problem solvers. The use of journaling, dialogue, and collaborative grouping reveals themselves as promising learning tasks that can be integrated in a mathematics curriculum that seeks to cultivate students’ thinking and reasoning.

A Comparison of Induction Motor Starting Methods Being Powered by a Diesel-Generator Set

Starting induction motors on isolated or weak systems is a highly dynamic process that can cause motor and load damage as well as electrical network fluctuations. Mechanical damage is associated with the high starting current drawn by a ramping induction motor. In order to compensate the load increase, the voltage of the electrical system decreases. Different starting methods can be applied to the electrical system to reduce these and other starting method issues. The purpose of this thesis is to build accurate and usable simulation models that can aid the designer in making the choice of an appropriate motor starting method. The specific case addressed is the situation where a diesel-generator set is used as the electrical supplied source to the induction motor. The most commonly used starting methods equivalent models are simulated and compared to each other. The main contributions of this thesis is that motor dynamic impedance is continuously calculated and fed back to the generator model to simulate the coupling of the electrical system. The comparative analysis given by the simulations has shown reasonably similar characteristics to other comparative studies. The diesel-generator and induction motor simulations have shown good results, and can adequately demonstrate the dynamics for testing and comparing the starting methods. Further work is suggested to refine the equivalent impedance presented in this thesis.

A METHODOLOGY TO EVALUATE OBSOLETE INVENTORY IN HEALTH CARE

Many organizations are currently facing inventory management problems such as distributing inventory on-time and maintain the correct inventory levels to satisfy the customer or end users. Organizations understand the need for maintaining the accurate inventory levels but sometimes fall short leading a wide performance gap in maintaining inventory accurately. The inventory inaccuracy can consume much of the investment on purchasing inventory and many times leads to excessive inventory. The research objective of thesis is to provide a decision making criteria to the management for closing or maintaining the warehouse based on basic purchasing and holding cost information. The specific objectives provide information regarding the impact of inventory carrying cost, obsolete inventory, inventory turns. The methodology section explains about the carrying cost ratio that would help inventory managers to adopt best practices to avoid obsolete inventory and also reduce excessive inventory levels. The research model was helpful in providing a decision making criteria based on the performance metric developed. This research model and performance metric had been validated by analysis of warehouse data and results indicated a shift from two-echelon inventory supply chain to a one-echelon or Just In Time (JIT) based inventory supply chain. The recommendations from the case study were used by a health care organization to reorganize the supply chain resulting in the reduction of excessive inventory.

Characterization of Glycation Sites on Human Serum Albumin using Mass Spectrometry

The modification of proteins by reducing sugars is a process that occurs naturally in the body. This process, which is known as glycation, has been linked to many of the chronic complications encountered during diabetes. Glycation has also been linked to changes in the binding of human serum albumin (HSA) to several drugs and small solutes in the body. While these effects are known, there is little information that explains why these changes in binding occur. The goal of this project was to obtain qualitative and quantitative information about glycation that occurs on HSA. The first section of this dissertation examined methods that could be used to quantify and identify glycation that occurs on HSA. The extent of glycation that occurred on HSA was quantified using oxygen-18 labeling mass spectrometry and the glycation sites were identified by observing the mass-to-charge (m/z) shifts that occurred in glycated HSA. This initial investigation revealed that oxygen-18 labeling based quantitation can be improved over previous methods if a relative comparison is done with oxygen-18 labeled peptides in a control HSA sample. Similarly, the process of making m/z shift-based assignments could be improved if only the peptides that were unique to the glycated HSA samples were used with internal calibration. These techniques were used in subsequent chapters for the assignment of early and late-stage glycation products on HSA. The regions of HSA that contained the highest amount of modification were identified, quantified, and ranked in order of their relative abundance. Of the commonly reported glycation sites, the N-terminus was found to have the highest extent of modification, followed by lysines 525, 199, and 439. The relative amount of modification on lysine 281, with respect to the aforementioned residues, varied with different degrees of glycation. The oxygen-18 labeling approach used for this analysis was novel because it allowed for the simultaneous quantification of all glycation-related modifications that were occurring on HSA. As such, several arginine residues were also found to have high amounts of modification on glycated HSA.

EXPERIMENTAL INVESTIGATION OF FOLDED PLATE GIRDERS AND SLAB JOINTS USED IN MODULAR CONSTRUCTION

The folded plate girder, a newly proposed bridge girder, is investigated through this thesis. The folded plate girder is cold bent out of a single sheet of steel. The cold bending eliminates the costly and inconsistent shop welds found in traditional girders. The folded plate girder is meant for application in short span bridges. The girder was subjected to an equivalent 75 year lifetime loading to investigate the fatigue performance. The rebar detail used in the closure region between adjacent slabs has been investigated in the past by the NCHRP 12-68 project. This thesis will proposes a hooked rebar detail as a cost effective alternative to the previously recommended headed rebar detail. The proposed hooked rebar detail looks to improve upon the headed bar detail by increasing the clear cover, and reducing the cost of fabrication and shipment of the rebar. Six specimens containing closure regions are subjected to both positive and negative moment loading in order to investigate their behavior and failure modes under ultimate load.

Class Notes for Math 918: Local Cohomology, Instructor Tom Marley

Topics include: Injective Module, Basic Properties of Local Cohomology Modules, Local Cohomology as a Cech Complex, Long exact sequences on Local Cohomology, Arithmetic Rank, Change of Rings Principle, Local Cohomology as a direct limit of Ext modules, Local Duality, Chevelley’s Theorem, Hartshorne- Lichtenbaum Vanishing Theorem, Falting’s Theorem.

URBAN WILDLIFE: CAN WE LIVE WITH THEM?

ABSTRACT: A survey of Extension Wildlife Specialists in the U.S. provided a basis for estimating the magnitude of urban wildlife damage and control in this country. Response to the 9-question mail questionnaire was good (76 percent) following the single mailing to all Extension Wildlife Specialists or people in similar positions listed in the national directory. The majority of questions were answered based upon the experiences and best estimates of these specialists for the interval October 1986-September 1987. Specialists had difficulty providing estimates of damage and costs of prevention and control; 57 percent were not able to provide any data on these topics. Several of the questions dealt with attitudes of people requesting urban wildlife information and/or assistance and wide ranges of responses were received to most of these questions. Most people (78 percent) appeared willing to implement prevention/control measures recommended by these specialists, more than half (61 percent) wanted the animal handled/removed by someone else, and only about 40 percent wanted the damage stopped regardless of cost. Also, slightly over half (55 percent) of clientele represented did not want the offending animal harmed in any way. These results were highly variable from state to state. Several differences were noted in overall responses regarding urban wildlife species. Requests for information were received most frequently for bats and snakes, but both of these groups of animals ranked very low in terms of actual damage reported. The most frequently mentioned groups of animals causing damage in urban areas were roosting birds (including pigeons, starlings, and sparrows), woodpeckers (especially flickers), tree squirrels, bats, and moles. In terms of actual dollar values of damage done, white-tailed deer and pocket gophers apparently caused the most estimated damage. Due to these differences, it is necessary to know which criteria are being used to make an assessment of the relative importance of animal damage control problems. Techniques for controlling urban wildlife damage, such as exclusion, live-trapping, repellents, and poisons, are compared and discussed in some detail in this paper. As urbanization occurs across the nation, concerns about urban wildlife damage will continue; in most cases, we can and will live among these creatures.