Estudo comparativo da utilização do nitrogênio como fluido alternativo após a injeção de vapor

Currently, due to part of world is focalized to petroleum, many researches with this theme have been advanced to make possible the production into reservoirs which were classified as unviable. Because of geological and operational challenges presented to oil recovery, more and more efficient methods which are economically successful have been searched. In this background, steam flood is in evidence mainly when it is combined with other procedures to purpose low costs and high recovery factors. This work utilized nitrogen as an alternative fluid after steam flood to adjust the best combination of alternation between these fluids in terms of time and rate injection. To describe the simplified economic profile, many analysis based on liquid cumulative production were performed. The completion interval and injection fluid rates were fixed and the oil viscosity was ranged at 300 cP, 1.000 cP and 3.000 cP. The results defined, for each viscosity, one specific model indicating the best period to stop the introduction of steam and insertion of nitrogen, when the first injected fluid reached its economic limit. Simulations in physics model defined from one-eighth nine-spot inverted were realized using the commercial simulator Steam, Thermal and Advanced Processes Reservoir Simulator STARS of Computer Modelling Group CMG

Caracterização cromatográfica do extrato fluido de Mikania glomerata Sprengel.

Amostras de extrato fluido de guaco - Mikania glomerata Sprengel provenientes de drogas referentes aos 12 meses do ano, foram analisadas comparativamente com vistas a obtenção de perfil cromatográfico, ao lado de padrões de cumarina, ácido cinamoil grandiflórico e ácido caurenóico. Diversos sistemas cromatográficos foram empregados. Como fases estacionárias foram empregadas sílica gelG-GO e sílica gel GF; como fases móveis: heptano: acetona 10:30; benzeno: acetona: acetato de etila 15:3:2; benzeno: acetato de etila 19:1; clorofórmio; acetato de etila: 7:3 e como reveladoers: reativo sulfovanílico: anisaldeído; solução de hidróxido de sódio 5%. A observação dos cromatogramas foi feita à luz natural e à luz UV de 254 e 366 nm. Foram observadas as presenças de pelo menos 18 substâncias no extrato fluido entre as quais as usadas como padrão. O ácido caurenóico não aparece como mancha extinção quando observado à luz UV em camada de sílica gel GF. Revelado com reativo sulfovanílico inicialmente apresenta coloração amarela a qual passa a violeta, roxa e, finalmente branco-leitosa. O sistema cromatográfico que melhor se presta a caracterização do extrato de guaco e constituído de: fase móvel: sílica gel 60; fase estacionária: clorofórmio: acetato etila 7:3; revelador hidróxido de sódio a 5%. Neste sistema, após revelação e observação a luz UV, aparecem 5 manchas no extrato entre as quais a de maior intensidade e a correspondente a cumarina que apresenta coloração amarelo esverdeado.

Caracterização farmacognóstica da droga e do extrato fluido de mentrasto: Ageratum conyzoides L.

A especie vegetal Argentum conyzoides L., empregada popularmente como antidiarreica, antiespasmódica, carminativa, febrifuga, antirreumática teve sua propriedade anti inflamatória comprovada cientificamente, foi estudada morfológica e anatomicamente com vistas a sua caracterização farmacognostica . O extrato fluido da referida planta foi analisado por cromatografia em camada delgada, através de diversos sistemas cromatográficas, com vistas a fornecer subsídios ao controle de qualidade deste insumo farmacêutico.

Caracterização cromatográfica em camada delgada do extrato fluido de guaco: Mikania glomerata Sprengel.

As frações hexanicas, clorofórmicas, em acetato de etila e etanólica do extrato fluido de guaco - Mikania glomerata foram analisadas por cromatografia em camada delgada frente a padrões de ácido caurenóico, ácido cinamoilgrandiflorico, estigmasterol e cumarina visando o estabelecimento de perfil cromatográfico que permita identificar este insumo farmacêutico.

Progettazione, realizzazione e caratterizzazione sperimentale di sensori capacitivi a fluido dielettrico.

Ad oggi, misurare grandezze fisiche in maniera pratica, distribuita e sostenibile è di grande importanza al fine di poter attivare strategie di digitalizzazione di qualsiasi applicazione: da quelle industriali con robotica collaborativa, fino alla domotica o tecnologia indossabile. La sfida di oggi consiste nel poter creare dei sensori che possano abilitare questi contesti, risultando efficienti, a basso consumo energetico e sostenibili in termini di materiali e componenti utilizzati. L’obiettivo della tesi è infatti quello di valutare una classe innovativa di sensori con principio di funzionamento capacitivo che risultino facili da progettare, fabbricare ed utilizzare. Nello specifico, due tipologie di sensore sono state sviluppate: uno per la misura di forza, l’altro per la misura angolare. Entrambi i dispositivi sono stati realizzati con materiale elastomerico a base di silicone, accoppiato con elettrodi conformi, in un sistema capacitivo deformabile. All’interno di questi sistemi, sono state ricavate delle camere per il contenimento di un fluido dielettrico al fine di poter monitorare lo spostamento del fluido per la misura capacitiva. La tesi riporta le linee guida principali per la progettazione di sensori che utilizzino componenti elastomerici sia conduttori che dielettrici, in combinazione con un fluido per una misura capacitiva. Successivamente, sono riportati tutti gli step di fabbricazione delle due architetture di sensore realizzate, discutendo i vari passaggi ed elencando i materiali utilizzati. Infine, le performance dei due sensori sono valutate sulla base dei risultati di una campagna sperimentale dedicata, eseguita su due setup di banco prova distinti progettati per testare la forza applicata per il primo sensore, e l’angolo di inclinazione per il secondo. Nelle conclusioni viene riportata la valutazione dell’efficienza di questi due sensori, insieme alle evoluzioni future per rendere questa proposta tecnologica affidabile e ad alte prestazioni.

Comparação entre diferentes ciclo simuladores e ciclismo em velódromo : testes de desempenho máximo de 5 quilômetros

Universidade Estadual de Campinas . Faculdade de Educação Física

Effects of temperature and salinity on the survival rates of coxicerberus ramosae (Albuquerque, 1978), an interstitial isopod of a Sandy Beach on the coast of Brazil

The tolerance to the combined effects of temperature and salinity was investigated in the interstitial isopod Coxicerberus ramosae (Albuquerque, 1978), a species of intertidal zone of sandy beaches in Rio de Janeiro, Brazil. The animals were collected on Praia Vermelha Beach. The experiments lasted 24 h and nine salinities and seven temperatures were used for a total of 63 combinations. Thirty animals were tested in each combination. The species showed high survival in most of the combinations. The temperature of 35 ºC was lethal and at 5 ºC, the animals tolerated only a narrow range of salinities. The statistical analyses showed that the effects of temperature and salinity were significant on the survival, which confirmed the euryhalinity and eurythermy of this species.

Effect of an energy-deficient diet on populations of ciliate protozoans in bovine rumen

Ten young rumen-cannulated crossbred steers were randomly divided into two groups: a control group (C; n=4), which was fed a balanced diet for daily weight gain of 900g; and a pronounced energy-deprived group (PED; n=6), receiving 30% less of the required energy for maintenance. After 140 days of these alimentary regimes, rumen fluid and urine samples were collected for biochemical and functional tests, before feeding and at 1, 3, 6, and 9 hours after feeding. The energy-deprivation diet caused a significant reduction in the number of Entodinium, Eodinium, Isotricha, Dasytricha, Eremoplastron, Eudiplodinium, Metadinium, Charonina, Ostracodinium, and Epidinium protozoa. There was no effect of the time of sampling in both groups on the total number of ciliates in rumen fluid. A higher number of protozoan forms in binary division were recorded in the control group, at the 6th and 9th hours after feeding (P<0.019). There was a high positive correlation between the total count of protozoans in rumen fluid and glucose fermentation, ammonia, and urinary allantoin excretion index; and a negative correlation between the total count of protozoa and metilene blue reduction, and a medium correlation between the total count of protozoa and total volatile fatty acids concentration. The determination of the protozoa populations does not imply in the use of complex and hard-to-execute techniques, although it is time consuming and needs practice. This exam particularly helps in clinical expected diagnosis.

Effects of croton urucurana extracts and crude resin on Anagasta kuehniella (Lepidoptera: Pyralidae)

Hundreds of plant species have been studied in order to find out the active ingredient responsible for their insecticidal activity against the pests of economic importance. To verify the insecticidal activity in the husk of stem of Croton urucurana Baillon 1864 (Euphorbiaceae) against Anagasta kuehniella Zeller 1879 (Lepidoptera: Pyralidae), the methanolic (EMeOH) extract, dichloromethane fraction (FDM), ethyl acetate fraction (FAE) and crude resin, incorporated into an artificial diet were evaluated. EMeOH (0.5, 1.0 and 2.0%) and crude resin (2.0%) interfered with neither the weight nor the survival of fourth instar larvae and other analyzed parameters. FDM (2.0%) fraction caused mortality of 65%, and the artificial diet containing 2.0, 1.0 and 0.5% FAE caused 100, 55 and 68% mortality respectively when compared with the control, confirming the least efficiency rates of food conversion for FDM(2.0%) and FAE(1.0%). The tryptic analysis performed with the midgut fluid of fourth-instar larvae demonstrated that tryptic and chymiotryptic activities for the larvae fed artificial diet containing EMeOH and crude resin were not different.

WOOD DENSITY VARIATION AND TREE RING DEMARCATION IN Gmelina arborea TREES USING X-RAY DENSITOMETRY

Due to its relationship with other properties, wood density is the main wood quality parameter. Modern, accurate methods - such as X-ray densitometry - are applied to determine the spatial distribution of density in wood sections and to evaluate wood quality. The objectives of this study were to determinate the influence of growing conditions on wood density variation and tree ring demarcation of gmelina trees from fast growing plantations in Costa Rica. The wood density was determined by X-ray densitometry method. Wood samples were cut from gmelina trees and were exposed to low X-rays. The radiographic films were developed and scanned using a 256 gray scale with 1000 dpi resolution and the wood density was determined by CRAD and CERD software. The results showed tree-ring boundaries were distinctly delimited in trees growing in site with rainfall lower than 25 10 mm/year. It was demonstrated that tree age, climatic conditions and management of plantation affects wood density and its variability. The specific effect of variables on wood density was quantified by for multiple regression method. It was determined that tree year explained 25.8% of the total variation of density and 19.9% were caused by climatic condition where the tree growing. Wood density was less affected by the intensity of forest management with 5.9% of total variation.

A perivascular epithelioid cell tumor of the stomach: An unsuspected diagnosis

Perivascular epithelioid cell tumor (PEComa) is a rare mesenchymal neoplasia and currently well recognized as a distinct entity with characteristic morphological, immunohistochemical and molecular findings. We report a case of PEComa arising in the antrum of a 71-year-old female with melena. The tumor, located predominantly in the submucosa as a well delimited nodule, measured 3.0 cm in diameter and was completely resected, with no evidence of the disease elsewhere. Histologically, it was composed predominantly of eosinophilic epithelioid cells arranged in small nests commonly related to variably sized vessels, with abundant extracellular material, moderate nuclear variation and discrete mitotic activity. No necrosis, angiolymphatic invasion or perineural infiltration was seen. Tumor cells were uniformly positive for vimentin, smooth muscle actin, desmin and melan A. Although unusual, PEComa should be considered in the differential diagnosis of gastric neoplasia with characteristic epithelioid and oncocytic features and prominent vasculature: (C) 2010 Baishideng. All rights reserved.

Evaluation of Dendritic Cell-Tumor Cell Hybrid Vaccine Storage

Clinical trials using dendritic cells (DCs) to treat cancer patients have generated promising results in recent years. However, even simple aspects of this therapy are still not well understood, including the storage and distribution of manufactured vaccines. These processes are essential and must be elucidated in order to reduce costs. We evaluated the effects of different storage conditions on vaccine functionality using mixed lymphocyte reaction (MLR). Vaccine storage at 4 degrees C for up to 72 h had no significant effect on vaccine activity. Shipping to distant places is possible, if vaccines are kept at 4 degrees C and used up to 3 days after manufacture date.

Mucosal Leishmaniasis Caused by Leishmania (Viannia) braziliensis and Leishmania (Viannia) guyanensis in the Brazilian Amazon

Background: Leishmania (Viannia) braziliensis is a parasite recognized as the most important etiologic agent of mucosal leishmaniasis (ML) in the New World. In Amazonia, seven different species of Leishmania, etiologic agents of human Cutaneous Leishmaniasis, have been described. Isolated cases of ML have been described for several different species of Leishmania: L. (V.) panamensis, L. (V.) guyanensis and L. (L.) amazonensis. Methodology: Leishmania species were characterized by polymerase chain reaction (PCR) of tissues taken from mucosal biopsies of Amazonian patients who were diagnosed with ML and treated at the Tropical Medicine Foundation of Amazonas (FMTAM) in Manaus, Amazonas state, Brazil. Samples were obtained retrospectively from the pathology laboratory and prospectively from patients attending the aforementioned tertiary care unit. Results: This study reports 46 cases of ML along with their geographical origin, 30 cases caused by L. (V.) braziliensis and 16 cases by L. (V.) guyanensis. This is the first record of ML cases in 16 different municipalities in the state of Amazonas and of simultaneous detection of both species in 4 municipalities of this state. It is also the first record of ML caused by L. (V.) guyanensis in the states of Para, Acre, and Rondonia and cases of ML caused by L. (V.) braziliensis in the state of Rondonia. Conclusions/Significance: L. (V.) braziliensis is the predominant species that causes ML in the Amazon region. However, contrary to previous studies, L. (V.) guyanensis is also a significant causative agent of ML within the region. The clinical and epidemiological expression of ML in the Manaus region is similar to the rest of the country, although the majority of ML cases are found south of the Amazon River.

Detection of Human Bocavirus mRNA in Respiratory Secretions Correlates with High Viral Load and Concurrent Diarrhea

Human bocavirus (HBoV) is a parvovirus recently identified in association with acute respiratory infections (ARI). Despite its worldwide occurrence, little is known on the pathogenesis of HBoV infections. In addition, few systematic studies of HBoV in ARI have been conducted in Latin America. Therefore, in order to test whether active viral replication of human bocavirus is associated with respiratory diseases and to understand the clinical impact of this virus in patients with these diseases, we performed a 3-year retrospective hospital-based study of HBoV in outpatients and inpatients with symptoms of Acute Respiratory Infections (ARI) in Brazil. Nasopharyngeal aspirates (NPAs) from 1015 patients with respiratory symptoms were tested for HBoV DNA by PCR. All samples positive for HBoV were tested by PCR for all other respiratory viruses, had HBoV viral loads determined by quantitative real time PCR and, when possible, were tested by RT-PCR for HBoV VP1 mRNA, as evidence of active viral replication. HBoV was detected in 4.8% of patients, with annual rates of 10.0%, 3.0% and 3.0% in 2005, 2006 and 2007, respectively. The range of respiratory symptoms was similar between HBoV-positive and HBoV-negative ARI patients. However, a higher rate of diarrhea was observed in HBoV-positive patients. High HBoV viral loads (> 10(8) copies/mL) and diarrhea were significantly more frequent in patients with exclusive infection by HBoV and in patients with detection of HBoV VP1 mRNA than in patients with viral co-infection, detected in 72.9% of patients with HBoV. In summary, our data demonstrated that active HBoV replication was detected in a small percentage of patients with ARI and was correlated with concurrent diarrhea and lack of other viral co-infections.