Properties and performance of polymer modified cements and mortars

Polymer modified cements and mortars have become popular for use as patch repair materials. General evidence suggests that these materials offer considerable improvements compared to traditional mortars although the mechanisms for this are not fully understood. This work elucidates the factors which govern some properties and performance of different polymer systems. In view of the wide range of commercial systems available, investigations concentrated on the use of three of the most commonly available groups of polymers. These were: (1) Styrene Butadiene Rubber (SBR), (2) Acrylics and, (3) Ethylene Vinyl Acetates (EVA). The later two were in the form of both emulsions and redispersible powders. Experiments concentrated on: (1) Rheological behaviour of polymer modified cement pastes; (2) Workability of polymer modified mortars; (3) Influence of curing conditions on the pore size distribution and diffusion of chloride ions; (4) Bond strength of polymer modified cement and mortar patches; and (5) Microscopic examination and semi-quantitative analyses of the bulk and interfacial microstructures. The following main conclusions were reached: (1) The addition of polymer emulsions have a considerable influence on the workability of fresh cement pastes, the extent of this depending on the type of system used. (2) The rheological parameters of fresh polymer modified mortars can be established using a two-point workability test which may be used when comparing the properties of different systems at constant workability. (3) Curing conditions affect the properties of polymer modified systems and a wet/dry curing regime was essential for good adhesion of these materials to mortar substrates. (4) In contrast, the wet/dry curing regime resulted in a curing affected zone at the surface of patch materials. This can result in a much coarser pore structure and enhanced diffusion of e.g. chloride ions. (5) The microstructure of polymer modified systems was very different compared with the unmodified cement/mortar and varied depending on curing conditions.

Modelling data and voice traffic over IP networks using continuous-time Markov models

Common approaches to IP-traffic modelling have featured the use of stochastic models, based on the Markov property, which can be classified into black box and white box models based on the approach used for modelling traffic. White box models, are simple to understand, transparent and have a physical meaning attributed to each of the associated parameters. To exploit this key advantage, this thesis explores the use of simple classic continuous-time Markov models based on a white box approach, to model, not only the network traffic statistics but also the source behaviour with respect to the network and application. The thesis is divided into two parts: The first part focuses on the use of simple Markov and Semi-Markov traffic models, starting from the simplest two-state model moving upwards to n-state models with Poisson and non-Poisson statistics. The thesis then introduces the convenient to use, mathematically derived, Gaussian Markov models which are used to model the measured network IP traffic statistics. As one of the most significant contributions, the thesis establishes the significance of the second-order density statistics as it reveals that, in contrast to first-order density, they carry much more unique information on traffic sources and behaviour. The thesis then exploits the use of Gaussian Markov models to model these unique features and finally shows how the use of simple classic Markov models coupled with use of second-order density statistics provides an excellent tool for capturing maximum traffic detail, which in itself is the essence of good traffic modelling. The second part of the thesis, studies the ON-OFF characteristics of VoIP traffic with reference to accurate measurements of the ON and OFF periods, made from a large multi-lingual database of over 100 hours worth of VoIP call recordings. The impact of the language, prosodic structure and speech rate of the speaker on the statistics of the ON-OFF periods is analysed and relevant conclusions are presented. Finally, an ON-OFF VoIP source model with log-normal transitions is contributed as an ideal candidate to model VoIP traffic and the results of this model are compared with those of previously published work.

Developing and evaluating a methodology for business process improvement

Purpose – There appears to be an ever-insatiable demand from markets for organisations to improve their products and services. To meet this, there is a need to provide business process improvement (BPI) methodologies that are holistic, structured and procedural. Therefore, this paper describes research that has formed and tested a generic and practical methodology termed model-based and integrated process improvement (MIPI) to support the implementation of BPI; and to validate its effectiveness in organisations. This methodology has been created as an aid for practitioners within organisations. Design/methodology/approach – The research objectives were achieved by: reviewing and analysing current methodologies, and selecting a few frameworks against key performance indicators. Using a refined Delphi approach and semi-structured interview with the “experts” in the field. Intervention, case study and process research approach to evaluating a methodology. Findings – The BPI methodology was successfully formed and applied by the researcher and directly by the companies involved against the criteria of feasibility, usability and usefulness. Research limitations/implications – The paper has demonstrated a new knowledge on how to systematically assess a BPI methodology in practice. Practical implications – Model-based and integrated process improvement methodology (MIPI) methodology offers the practitioner (experienced and novice) a set of step-by-step aids necessary to make informed, consistent and efficient changes to business processes. Originality/value – The novelty of this research work is the creation of a holistic workbook-based methodology with relevant tools and techniques. It extends the capabilities of existing methodologies.

A greenhouse integrating desalination, water saving and rainwater harvesting for use in salt-affected inland regions

This study proposes a new type of greenhouse for water re-use and energy saving for agriculture in arid and semi-arid inland regions affected by groundwater salinity. It combines desalination using reverse osmosis (RO), re-use of saline concentrate rejected by RO for cooling, and rainwater harvesting. Experimental work was carried at GBPUAT, Pantnagar, India. Saline concentrate was fed to evaporative cooling pads of greenhouse and found to evaporate at similar rates as conventional freshwater. Two enhancements to the system are described: i) A jet pump, designed and tested to use pressurized reject stream to re-circulate cooling water and thus maintain uniform wetness in cooling pads, was found capable of multiplying flow of cooling water by a factor of 2.5 to 4 while lifting water to a head of 1.55 m; and ii) Use of solar power to drive ventilation fans of greenhouse, for which an electronic circuit has been produced that uses maximum power-point tracking to maximize energy efficiency. Re-use of RO rejected concentrate for cooling saves water (6 l d-1 m-2) of greenhouse floor area and the improved fan could reduce electricity consumption by a factor 8.

Innovation and the survival of new firms across British regions

This paper analyses the survival of the complete cohort of more than 162,000 limited companies incorporated in Britain in 2001 over the subsequent five-year period. For this purpose, we estimate firms' hazards of failure and survival functions using nonparametric and semi-parametric techniques. The paper focuses on two important policy-related issues.The first is to what extent survival rates vary across regions in Britain. A second, and related, policy issue concerns innovation. The data available allows us to look at the intellectual property (IP) activity of all British firms, including that of the 162,000 new firms in 2001. The results indicate substantial differences in survival rates across regions, and also that IP activity is associated with a higher probability of survival. These differences across regions, and the importance of IP activity, remain when we condition on a large range of regional, industry and firm-level characteristics shifting firms' hazards of failure.

Generalized Variational Inequalities for Upper Hemicontinuous and Demi Operators with Applications to Fixed Point Theorems in Hilbert Spaces

∗ The final version of this paper was sent to the editor when the author was supported by an ARC Small Grant of Dr. E. Tarafdar.

A decision support system for waste collection management and its potential improvement with Radio-Frequency Identification Technology (RFID)

Due to vigorous globalisation and product proliferation in recent years, more waste has been produced by the soaring manufacturing activities. This has contributed to the significant need for an efficient waste management system to ensure, with all efforts, the waste is properly treated for recycling or disposed. This paper presents a Decision Support System (DSS) framework, based on Constraint Logic Programming (CLP), for the collection management of industrial waste (of all kinds) and discusses the potential employment of Radio-Frequency Identification Technology (RFID) to improve several critical procedures involved in managing waste collection. This paper also demonstrates a widely distributed and semi-structured network of waste producing enterprises (e.g. manufacturers) and waste processing enterprises (i.e. waste recycling/treatment stations) improving their operations planning by means of using the proposed DSS. The potential RFID applications to update and validate information in a continuous manner to bring value-added benefits to the waste collection business are also presented. © 2012 Inderscience Enterprises Ltd.

An Overview of Modelling Bulgarian Wildland Fire Behaviour by Application of a Mathematical Game Method and WRF-Fire Models

This paper presents the main achievements of the author’s PhD dissertation. The work is dedicated to mathematical and semi-empirical approaches applied to the case of Bulgarian wildland fires. After the introductory explanations, short information from every chapter is extracted to cover the main parts of the obtained results. The methods used are described in brief and main outcomes are listed. ACM Computing Classification System (1998): D.1.3, D.2.0, K.5.1.

Identification of key temperature measurement technologies for the enhancement of product and equipment integrity in the light controlled factory

Thermal effects in uncontrolled factory environments are often the largest source of uncertainty in large volume dimensional metrology. As the standard temperature for metrology of 20°C cannot be achieved practically or economically in many manufacturing facilities, the characterisation and modelling of temperature offers a solution for improving the uncertainty of dimensional measurement and quantifying thermal variability in large assemblies. Technologies that currently exist for temperature measurement in the range of 0-50°C have been presented alongside discussion of these temperature measurement technologies' usefulness for monitoring temperatures in a manufacturing context. Particular aspects of production where the technology could play a role are highlighted as well as practical considerations for deployment. Contact sensors such as platinum resistance thermometers can produce accuracy closest to the desired accuracy given the most challenging measurement conditions calculated to be ∼0.02°C. Non-contact solutions would be most practical in the light controlled factory (LCF) and semi-invasive appear least useful but all technologies can play some role during the initial development of thermal variability models.

UK and US board director perceptions of the significance of gender and racial diversity on board governance

This mixed-methods study examines the perceptions and opinions of United Kingdom FTSE 350, and US Fortune 500 board of director members regarding the significance of gender and racial diversity on board governance. Perceptions were gathered from eighty-two directors using self-reported surveys and semi-structured interviews. This thesis provides: (1) an opportunity to investigate the perceptions (opinions) of directors regarding the effects of board gender and racial diversity on new board appointments and on the dynamics of board decision making (2) an opportunity to investigate the perception (opinions) of directors regarding the effects of social capital, new board appointments and the dynamics of board decision making, and (3) an opportunity to investigate comparatively the differences between UK and US director perceptions regarding the effects of board gender and racial diversity on new board appointments and board decision making. My findings indicate that directors believe that expertise and experience are by far the most important attributes when decisions on the selection of new directors are being considered. While US directors report observing tangible benefits to gender and racial diversity, for their firms, as well as a willingness to consider diversity as an attribute in the selection process; most UK directors were strongly opposed to positive discrimination measures.1 A majority of directors do not believe that their own demographic characteristics, such as race or gender were attributes to their being selected to a board position; however white males perceive that these attributes were considered attributes to the appointment of diverse directors. Moreover, in the United Kingdom, male directors reported that they may be at a disadvantage for board selection when compared to their female counterparts, hence advocating for a selection process with minimal considerations of the demographic characteristics of new directors. Directors do not seem to consider diverse social capital of directors when making board appointments. Instead, US directors were more likely to be assisted in board appointments by their having similar social capital, and UK directors indicated that they only consider director expertise, and that expertise is considered to ensure a broad mix of skills and professional experience on the board.

Something to talk about: Content and Language Integrated Learning in Modern Languages in British Higher Education. A case study of German at Aston University

This thesis investigates Content and Language Integrated Learning (CLIL) in German undergraduate programmes in the UK. At its core is a study of how one German department integrates the teaching of language and content in its undergraduate programmes and how instructors and students experience this approach. This micro-context is embedded in the wider macro-context of UK Higher Education and subject to outside forces - be they political, economic, socio-cultural - whose effects will manifest in more or less obvious ways. Data was collected via an online survey of Heads of German at British universities to determine the status quo of CLIL in UK Higher Education and to investigate how certain institutional parameters determine the introduction of CLIL in Higher Education. This project employs a mixed-method case study approach and is based on student questionnaires and semi-structured interview with German teaching staff. The study brings to light a number of significant aspects. For example, contrary to popular belief, content provision in the L2 is rather common at British universities, which is currently not reflected in the research. Student data indicates that German students perceive clear advantages in the university’s approach to CLIL. They consider German-taught content classes challenging yet beneficial for their language development. Staff interviews have yielded intriguing information about perceived advantages and disadvantages of CLIL, about its implications for classroom practice, and about instructors’ attitude towards teacher training, which echo findings from similar investigations in European contexts. Finally, the results of the macro-analysis and the case study are compared and contrasted with findings from European research on ICLHE/CLIL to determine differences and similarities with the British context, a set of recommendations is made regarding CLIL practice at the case study institution, and some implications these indings may have for the future of CLIL in British higher education are discussed.

Pyrolysis and combustion of municipal solid wastes:evaluation of synergistic effects using TGA-MS

A thermogravimetric methodology was developed to investigate and semi-quantify the extent of synergistic effects during pyrolysis and combustion of municipal solid waste (MSW). Results from TGA-MS were used to compare the pyrolysis and combustion characteristics of single municipal solid waste components (polyvinyl chloride (PVC), polypropylene (PP), polystyrene (PS), branches (BR), leaves (LV), grass (GR), packaging paper (PK), hygienic paper (HP) and cardboard (CB)) and a mixture (MX) of PP, BR and CB. Samples were heated under dynamic conditions at 20°C/min from 25°C to 1000°C with the continuous record of their main evolved fragments. Synergistic effects were evaluated by comparing experimental and calculated weight losses and relative areas of MS peaks. Pyrolysis of the mixture happened in two stages, with the release of H2, CH4, H2O, CO and CO2 between 200 and 415°C and the release of CH4, CxHy, CO and CO2 between 415 and 525°C. Negative synergistic effect in the 1st stage was attributed to the presence of PP where the release of hydrocarbons and CO2 from BR and CB was inhibited, whereas positive synergistic effects were observed during the 2nd degradation stage. In a second part of the study, synergistic effects were related to the dependency of the effective activation energy (Eα) versus the conversion (α). Higher Eαs were obtained for MX during its 1st stage of pyrolysis and lower Eαs for the 2nd stage when compared to the individual components. On the other hand, mostly positive synergistic effects were observed during the combustion of the same mixture, for which lower Eαs were recorded.

Az agrárkereskedelem változása Magyarország és az Európai Unió között a csatlakozás után (The post-accession change in agricultural trading between Hungary and the EU)

2004-ben Magyarország kilenc közép-kelet-európai országgal együtt csatlakozott az Európai Unióhoz, ami számos változást idézett elő az agrárkereskedelem terén. A cikk célja, hogy a legfrissebb adatok és a szakirodalmi fejlemények tükrében bemutassa, hogyan alakult Magyarországon a mezőgazdasági alapanyagok és a feldolgozott termékek kereskedelme az Európai Unióval. A megnyilvánuló komparatív előnyök módszerét alkalmazva a cikk számos következtetésre jutott. Először is világossá vált, hogy a csatlakozás növelte az agrárkereskedelem intenzitását, ám negatív hatással volt a kereskedelem egyenlegére. Kimutatható továbbá, hogy Magyarország az alacsony hozzáadott értékű alapanyagexportra és a magas hozzáadott értékű feldolgozott termékek importjára koncentrált a csatlakozás után, noha ezek komparatív előnyei nagymértékben megváltoztak egy hatékony alkalmazkodási folyamat következtében. A változások tényét támasztják alá a különböző rövid és hosszú távú stabilitásvizsgálatok is, amelyek az agrártermékek megnövekedett versenyére utalnak az EU-15 piacán. Agrárpolitikai szempontból az elemzések alátámasztják a strukturális reformok szükségességét. / === / Numerous changes in agricultural trading from the EU accession of Hungary and nine other Central-East European countries in 2004. The article sets out to present, in the light of the latest figures and written contributions, how Hungary’s EU trade in agricultural raw and semi-processed products developed thereafter. It uses the method of manifest comparative advantages to reach its conclusions. First, it became clear that accession increased the intensity of agricultural trading, although it had a detrimental effect on the trade balance. It also appeared that post-accession Hungary was concentrating on exports of basic materials of low added value and imports of processed articles with high added value, although these comparative advantages were much altered by an effective process of adaptation. The fact of the changes is supported by various short and long-term stability examinations, which point to increased competition for agricultural products on EU15 markets. From the policy point of view, the analyses support the need for structural reforms.

Value creation and appropriation through the Hungarian SME’s food chain

Value creation is the result of the continuous innovation activity of the entrepreneur, which is carried out mainly in form of open innovation among the agri-food SMEs. However value creation is not the ultimate goal of the enterprises. They are more interested in increased appropriation of the created value. Although the value creation (innovation) is very well explored and cultivated area of research, there are some voids in the field of agriculture and food industry: the behavioural aspect of open innovation is very rare. The value capturing is even much less studied, therefor our research approach is largely explorative one. Data are drawn from a survey carried out in Hungary among the agri-food SMEs in 2014. We use Structural Equation Modelling as well as ordered probit and semi-non parametric ordered probit models for analysing the data. Our results show that there is positive relationship between the knowledge sharing with chain partners and the innovativeness. We could explore that size of the firm, absorptive capacity and openness to foreign trade ambiguously affects value capturing. However trust in chain partners, reciprocity in knowledge sharing with chain partners and willingness to cooperate with buyers positively influence the appropriation of the created value.

A qualitative analysis of the congruency of Jungian psychological preferences identified by the Myers-Briggs Type Indicator (MBTI) and the human resource development role of instructor/facilitator

The purpose of this ethnographic study was to describe and explain the congruency of psychological preferences identified by the Myers-Briggs Type Indicator (MBTI) and the human resource development (HRD) role of instructor/facilitator. This investigation was conducted with 23 HRD professionals who worked in the Miami, Florida area as instructors/facilitators with adult learners in job-related contexts.^ The study was conducted using qualitative strategies of data collection and analysis. The research participants were selected through a purposive sampling strategy. Data collection strategies included: (a) administration and scoring of the MBTI, Form G, (b) open-ended and semi-structured interviews, (c) participant observations of the research subjects at their respective work sites and while conducting training sessions, (d) field notes, and (e) contact summary sheets to record field research encounters. Data analysis was conducted with the use of a computer program for qualitative analysis called FolioViews 3.1 for Windows. This included: (a) coding of transcribed interviews and field notes, (b) theme analysis, (c) memoing, and (d) cross-case analysis.^ The three major themes that emerged in relation to the congruency of psychological preferences and the role of instructor/facilitator were: (1) designing and preparing instruction/facilitation, (2) conducting training and managing group process, and (3) interpersonal relations and perspectives among instructors/facilitators.^ The first two themes were analyzed through the combination of the four Jungian personality functions. These combinations are: sensing-thinking (ST), sensing-feeling (SF), intuition-thinking (NT), and intuition-feeling (NF). The third theme was analyzed through the combination of the attitudes or energy focus and the judgment function. These combinations are: extraversion-thinking (ET), extraversion-feeling (EF), introversion-thinking (IT), and introversion-feeling (IF).^ A last area uncovered by this ethnographic study was the influence exerted by a training and development culture on the instructor/facilitator role. This professional culture is described and explained in terms of the shared values and expectations reported by the study respondents. ^