Faith lost and regained : the evolution of Anne Rice's critique of christianity in The Vampire Chronicles

Ce mémoire réunit trois romans de la série Les Chroniques de vampires de la populaire écrivaine américaine Anne Rice (The Vampire Lestat, Memnoch the Devil et Blood Canticle) afin d'étudier l'évolution de sa critique de la religion à travers l'écriture. Une analyse précise et complète de Lestat de Lioncourt, le personnage principal de la série, est faite afin de mieux comprendre l'impact de la transformation spirituelle du protagoniste sur l'ensemble de l'oeuvre de Rice. Dans The Vampire Lestat, le rejet de toute forme de croyances religieuses de la part de Lestat ainsi que la déconstruction et l'érotisation de rituels religieux traditionnels reflètent l'influence de l'athéisme. Memnoch the Devil représente la transition entre le refus de croire de Lestat et son retour subséquent à la religion catholique. Finalement, Blood Canticle symbolise le retour vers la foi du protagoniste et de l'auteur, en plus de marquer la fin des Chroniques de vampires de Rice. L'analyse s'inspire d'éléments biographiques afin de démontrer l'importance de la religion dans les récits de Rice, sans toutefois considérer ses romans comme des autobiographies.

Intersectionality in Practice : The Politics of Inclusion in the Québécois Women's Movement

En tant qu'acteur important de la vie politique québécoise, le mouvement des femmes a réussi à garantir de nouveaux droits pour les femmes et a fortement contribué à améliorer leurs conditions de vie. Cependant, son incapacité à reconnaître et à prendre en compte les expériences particulières des femmes qui vivent de multiple discriminations a été critiquée entre autres par les femmes autochtones, les femmes de couleur, les femmes immigrantes, les lesbiennes et les femmes handicapées. Par exemple, dans les 40 dernières années, un nombre croissant de femmes immigrantes et racisées se sont organisées en parallèle au mouvement pour défendre leurs intérêts spécifiques. Dans ce mémoire, je me penche sur la façon dont le mouvement des femmes québécois a répondu à leurs demandes de reconnaissance et adapté ses pratiques pour inclure les femmes de groupes ethniques et raciaux minoritaires. Bien que la littérature sur l'intersectionalité ait fourni de nombreuses critiques des tentatives des mouvements sociaux d'inclure la diversité, seulement quelques recherches se sont penchées sur la façon dont les organisations tiennent compte, dans leurs pratiques et discours, des identités et intérêts particuliers des groupes qui sont intersectionnellement marginalisés. En me basant sur la littérature sur l'instersectionnalité et les mouvements sociaux, j'analyse un corpus de 24 entretiens effectués auprès d'activistes travaillant dans des associations de femmes au Québec afin d'observer comment elles comprennent et conceptualisent les différences ethniques et raciales et comment cela influence en retour leurs stratégies d'inclusion. Je constate que la façon dont les activistes conceptualisent l'interconnexion des rapports de genre et de race/ethnicité en tant qu'axes d'oppression des femmes a un impact sur les plateformes politiques des organisations, sur les stratégies qu'elles mettent de l'avant pour favoriser l'inclusion et l'intégration des femmes immigrantes et racisées et sur leur capacité à travailler en coalition.

A unified framework for the comprehension of software's time dimension

Les logiciels sont de plus en plus complexes et leur développement est souvent fait par des équipes dispersées et changeantes. Par ailleurs, de nos jours, la majorité des logiciels sont recyclés au lieu d’être développés à partir de zéro. La tâche de compréhension, inhérente aux tâches de maintenance, consiste à analyser plusieurs dimensions du logiciel en parallèle. La dimension temps intervient à deux niveaux dans le logiciel : il change durant son évolution et durant son exécution. Ces changements prennent un sens particulier quand ils sont analysés avec d’autres dimensions du logiciel. L’analyse de données multidimensionnelles est un problème difficile à résoudre. Cependant, certaines méthodes permettent de contourner cette difficulté. Ainsi, les approches semi-automatiques, comme la visualisation du logiciel, permettent à l’usager d’intervenir durant l’analyse pour explorer et guider la recherche d’informations. Dans une première étape de la thèse, nous appliquons des techniques de visualisation pour mieux comprendre la dynamique des logiciels pendant l’évolution et l’exécution. Les changements dans le temps sont représentés par des heat maps. Ainsi, nous utilisons la même représentation graphique pour visualiser les changements pendant l’évolution et ceux pendant l’exécution. Une autre catégorie d’approches, qui permettent de comprendre certains aspects dynamiques du logiciel, concerne l’utilisation d’heuristiques. Dans une seconde étape de la thèse, nous nous intéressons à l’identification des phases pendant l’évolution ou pendant l’exécution en utilisant la même approche. Dans ce contexte, la prémisse est qu’il existe une cohérence inhérente dans les évènements, qui permet d’isoler des sous-ensembles comme des phases. Cette hypothèse de cohérence est ensuite définie spécifiquement pour les évènements de changements de code (évolution) ou de changements d’état (exécution). L’objectif de la thèse est d’étudier l’unification de ces deux dimensions du temps que sont l’évolution et l’exécution. Ceci s’inscrit dans notre volonté de rapprocher les deux domaines de recherche qui s’intéressent à une même catégorie de problèmes, mais selon deux perspectives différentes.

Biomass and minerals distribution in family of banana 'prata-ana' fertilized with zinc through thinned sprout

In the North of Minas Gerais it is cultivated basically 'Prata-Ana' banana, a cultivar that requires mainly Zn. The possibility of zinc supply, without this nutrient getting in contact with the soil, it is important for the region, since several factors take to the low availability of the element supplied by the soil, as: elevated organic matter content on the surface (from cultural residues); maintenance of high pH of the soil - above 6,00 - as strategy contrary to the proliferation of the causal agent of the Fusarium Wilt; frequent fertilizations with potassium and magnesium that, besides converting the medium into base, they reduce the participation of Zn in the balance cation/anion of the soil, hindering the absortion of this micronutrient by the plant. For determining the distribution of biomass and minerals in the Prata-Ana" banana, cultivated under irrigation in the North of Minas Gerais, when the zinc was supplied through thinned sprout, an experiment was carried out in the Irrigated Perimeter of Jaiba. The plants were fertilized with 0,00; 1,66 and 3,33 g.family-(1) of Zn, through thinned sprout. One month after the fertilizations from October 2007 and February 2008, the production of fresh mass (FM) and dry mass (DM) were evaluated, the contents and meanings of minerals in all the bananas "family" bodies composed by mother-plant with bunch + tall daughter-plant + granddaughter-plant. The doses of Zn did not influence on the production of FM and DM of the plants in the first evaluation, while in the second evaluation positive effect of the treatment was observed just for MF accumulated in the inferior leaves, in the portions of the medium third and inferior of the pseudostem, and in the mother-plant's rhizome. As much the content as the accumulation of nutrients in the mother-plants presented the following decreasing order: K > N > Ca > Mg > P > S > Fe > Zn > B > Cu. The Zn contents were affected by the dose of that micronutrient in the most of the studied situations. The zinc supplied through thinned sprout increased in the mother-plant, and then it was redistributed in the banana's "family".

Razor Thin Win: The 1972 Constitution Ballot, Campaign, Ratification & the Courts -- Mae Nan (Robinson) Ellingson & Mick McKeon “In the Crucible of Change”

Beyond the challenge of crafting a new state Constitution that empowered the people and modernized and opened up state and local government in Montana, the Constitutional Convention delegates, as they signed the final document, looked forward to the arduous task of getting it ratified by the electorate in a short ten week period between the end of the convention on March 24 and the ratification election of June 6, 1972. While all 100 delegates signed the draft Constitution, not all supported its adoption. But the planning about how to get it adopted went back to the actions of the Convention itself, which carefully crafted a ballot that kept “hot political issues” from potentially killing the entire document at the polls. As a result, three side issues were presented to the electorate on the ballot. People could vote for or against those side issues and still vote to ratify the entire document. Thus, the questions of legalizing gambling, having a unicameral legislature and retaining the death penalty were placed separately on the ballot (gambling passed, as did the retention of the death penalty, but the concept of a one-house legislature was defeated). Once the ballot structure was set, delegates who supported the new Constitution organized a grassroots, locally focused effort to secure ratification – thought hampered by a MT Supreme Court decision on April 28 that they could not expend $45,000 in public monies that they had set aside for voter education. They cobbled together about $10,000 of private money and did battle with the established political forces, led by the MT Farm Bureau, MT Stockgrowers’ Assn. and MT Contractors Assn., on the question of passage. Narrow passage of the main document led to an issue over certification and a Montana Supreme Court case challenging the ratification vote. After a 3-2 State Supreme Court victory, supporters of the Constitution then had to defend the election results again before the federal courts, also a successful effort. Montana finally had a new progressive State Constitution that empowered the people, but the path to it was not clear and simple and the win was razor thin. The story of that razor thin win is discussed in this chapter by the two youngest delegates to the 1972 Constitutional Convention, Mae Nan Ellingson of Missoula and Mick McKeon, then of Anaconda. Both recognized “Super Lawyers in their later professional practices were also significant players in the Constitutional Convention itself and actively participated in its campaign for ratification. As such, their recollections of the effort provide an insider’s perspective of the struggle to change Montana for the better through the creation and adoption of a new progressive state Constitution “In the Crucible of Change.” Mae Nan (Robinson) Ellingson was born Mae Nan Windham in Mineral Wells, TX and graduated from Mineral Wells High School in 1965 and Weatherford College in Weatherford, TX in 1967. Mae Nan was the youngest delegate at the 1972 Convention from Missoula. She moved to Missoula in 1967 and received her BA in Political Science with Honors from the University of MT in 1970. She was a young widow known by her late husband’s surname of Robinson while attending UM graduate school under the tutelage of noted Professor Ellis Waldron when he persuaded her to run for the Constitutional Convention. Coming in a surprising second in the delegate competition in Missoula County she was named one of the Convention���s “Ten Outstanding Constitutional Convention Delegates,” an impressive feat at such a young age. She was 24 at the time, the youngest person to serve at the ConCon, and one of 19 women out of 100 delegates. In the decade before the Convention, there were never more than three women Legislators in any session, usually one or two. She was a member of the American Association of University Women, a Pi Sigma Alpha political science honorary, and a Phi Alpha Theta historical honorary. At the Convention, she led proposals for the state's bill of rights, particularly related to equal rights for women. For years, Ellingson kept a copy of the preamble to the Constitution hanging in her office; while all the delegates had a chance to vote on the wording, she and delegate Bob Campbell are credited with the language in the preamble. During the convention, she had an opportunity that opened the door to her later career as an attorney. A convention delegate suggested to her that she should go to law school. Several offered to help, but at the time she couldn't go to school. Her mom had died in Texas, and she ended up with a younger brother and sister to raise in Missoula. She got a job teaching, but about a year later, intrigued with the idea of pursuing the law as a career, she called the man back to ask about the offer. Eventually another delegate, Dave Drum of Billings, sponsored her tuition at the UM School of Law. After receiving her JD with Honors (including the Law Review and Moot Court) from the UM Law School Ellingson worked for the Missoula city attorney's office for six years (1977-83), and she took on landmark projects. During her tenure, Missoula became the first city to issue open space bonds, a project that introduced her to Dorsey & Whitney. The city secured its first easement on Mount Sentinel, and it created the trail along the riverfront with a mix of playing fields and natural vegetation. She also helped develop a sign ordinance for the city of Missoula. She ended up working as bond counsel for Dorsey & Whitney, and she opened up the firm's full-fledged Missoula office after commuting a couple of years to its Great Falls office. She was a partner at Dorsey Whitney, working there from 1983 until her retirement in 2012. The area of law she practiced there is a narrow specialty - it requires knowledge of constitutional law, state and local government law, and a slice of federal tax law - but for Ellingson it meant working on great public projects – schools, sewer systems, libraries, swimming pools, ire trucks. At the state level, she helped form the Montana Municipal Insurance Authority, a pooled insurance group for cities. She's shaped MT’s tax increment law, and she was a fixture in the MT Legislature when they were debating equal rights. As a bond lawyer, though, Ellingson considers her most important work for the state to be setting up the Intercap Program that allowed local governments to borrow money from the state at a low interest rate. She has been a frequent speaker at the League of Cities and Towns, the Montana Association of Counties, and the Rural Water Users Association workshops on topics related to municipal finance, as well as workshops sponsored by the DNRC, the Water and Sewer Agencies Coordination Team, and the Montana State University Local Government Center. In 2002, she received an outstanding service award from the Montana Rural Water Users Association. In addition to being considered an expert on Montana state and constitutional law, local government law and local government finance, she is a frequent teacher at the National Association of Bond Lawyers (NABL) Fundamentals of Municipal Bond Law Seminar and the NABL Bond Attorney’s Workshop. For over 30 years Mae Nan has participated in the drafting of legislation in Montana for state and local finance matters. She has served on the Board of Directors of NABL, as Chairman of its Education Committee, was elected as an initial fellow in 1995 to the American College of Bond Counsel, and was recognized as a Super Lawyer in the Rocky Mountain West. Mae Nan was admitted to practice before the MT and US Supreme Courts, was named one of “America’s Leading Business Lawyers” by Chambers USA (Rank 1), a Mountain States Super Lawyer in 2007 and is listed in Best Lawyers in America; she is a member and former Board Member of NABL, a Fellow of the American College of Bond Counsel and a member of the Board of Visitors of the UM Law School. Mae Nan is also a philanthropist who serves on boards and applies her intelligence to many organizations, such as the Missoula Art Museum. [Much of this biography was drawn from a retirement story in the Missoulian and the Dorsey Whitney web site.] Mick McKeon, born in Anaconda in 1946, is a 4th generation Montanan whose family roots in this state go back to the 1870’s. In 1968 he graduated from Notre Dame with a BA in Communications and received a Juris Doctorate degree from the University of Montana Law School in 1971. Right after graduating from law school, Mick was persuaded by his father, longtime State Senator Luke McKeon, and his uncle, Phillips County Attorney Willis McKeon, to run for delegate to Montana’s Constitutional Convention and was elected to represent Deer Lodge, Philipsburg, Powell, and part of Missoula Counties. Along with a coalition of delegates from Butte and Anaconda, he fought through the new Constitution to eliminate the legal strangle hold, often called “the copper collar,” that corporate interests -- the Anaconda Company and its business & political allies -- had over state government for nearly 100 years. The New York Times called Montana’s Constitutional Convention a “prairie revolution.” After helping secure the ratification of the new Constitution, Mick began his practice of law in Anaconda where he engaged in general practice for nearly 20 years. Moving to Butte in 1991, Mick focused has practice in personal injury law, representing victims of negligence and corporate wrongdoing in both Montana district courts and federal court. As such, he participated in some of the largest cases in the history of the state. In 1992 he and his then law partner Rick Anderson obtained a federal court verdict of $11.5 million -- the largest verdict in MT for many years. Mick’s efforts on behalf of injured victims have been recognized by many legal organizations and societies. Recently, Mick was invited to become a member of the International Academy of Trial Lawyers - 600 of the top lawyers in the world. Rated as an American Super Lawyer, he has continuously been named one of the Best Lawyers in America, and an International Assn. of Trial Lawyers top 100 Trial Lawyer. In 2005, he was placed as one of Montana’s top 4 Plaintiff’s lawyers by Law Dragon. Mick is certified as a civil trial specialist by the National Board of Trial Advocacy and has the highest rating possible from Martindale-Hubble. Mick was awarded the Montana Trial Lawyers Public Service Award and provided pro bono assistance to needy clients for his entire career. Mick’s law practice, which he now shares with his son Michael, is limited to representing individuals who have been injured in accidents, concentrating on cases against insurance companies, corporations, medical providers and hospitals. Mick resides in Butte with his wife Carol, a Butte native. Mick, Carol, Michael and another son, Matthew, who graduated from Dartmouth College and was recently admitted to the Montana bar, enjoy as much of their time together in Butte and at their place on Flathead Lake.

Process evaluation of intervention program for prevention of early sexual activity and alcohol use among Hispanic teenagers

Hispanic teens are a high-risk population for initiation of early sexual activity and alcohol use which in turn has numerous social and health consequences. One strategy to address prevention of these behaviors is to implement a capacity building intervention that promotes parent child communication, encompasses their cultural values and community participation. This study describes the process evaluation of a pilot intervention program amongst Hispanic teens and their families living along the Texas-Mexico border. “Girls Lets Talk” is a small group intervention with 10-14 year old teens and their female adult family members that involves education regarding effects of alcohol use and sexual activity as well as activities for monitoring and refusal skills to prevent risky behaviors. Two waves of the program each consisting of at least seven mother daughter dyads were conducted. During the designing process, community advisory board meetings and focus groups were held to review course materials and ensure they were appropriate to the Mexican American culture. Parent and adolescent surveys were administered at the beginning and end of the intervention to assess for psychosocial outcome variables. All sessions received high mean satisfactory scores (mean of 4.00 or better on a five point scale) for both adult and adolescent participants. Qualitative feedback was obtained via debriefing sessions to evaluate experience as well as alter recruitment strategies. A Wilcoxon Sign Rank analysis of the pre and post intervention surveys was done that showed significant changes in some outcome variables such as intentions and confidence for monitoring behaviors for adults and beliefs regarding sexual activity. “Girls Lets Talk” is a promising example of how a process evaluation plan can help develop a theory based health promotion program using the community based participatory research approach. The intervention may also be effective in altering intentions and enhancing self-efficacy among parents and teens in order to decrease risky behaviors such as early sexual activity and alcohol use.^

Collective Organization of Complex Networks: Emergent Scales, Vulnerability, and Targeting of Desired Dynamics

Cuando una colectividad de sistemas din��micos acoplados mediante una estructura irregular de interacciones evoluciona, se observan din��micas de gran complejidad y fen��menos emergentes imposibles de predecir a partir de las propiedades de los sistemas individuales. El objetivo principal de esta tesis es precisamente avanzar en nuestra comprensión de la relación existente entre la topología de interacciones y las din��micas colectivas que una red compleja es capaz de mantener. Siendo este un tema amplio que se puede abordar desde distintos puntos de vista, en esta tesis se han estudiado tres problemas importantes dentro del mismo que están relacionados entre sí. Por un lado, en numerosos sistemas naturales y artificiales que se pueden describir mediante una red compleja la topología no es estática, sino que depende de la din��mica que se desarrolla en la red: un ejemplo son las redes de neuronas del cerebro. En estas redes adaptativas la propia topología emerge como consecuencia de una autoorganización del sistema. Para conocer mejor cómo pueden emerger espontáneamente las propiedades comúnmente observadas en redes reales, hemos estudiado el comportamiento de sistemas que evolucionan según reglas adaptativas locales con base empírica. Nuestros resultados numéricos y analíticos muestran que la autoorganización del sistema da lugar a dos de las propiedades más universales de las redes complejas: a escala mesoscópica, la aparición de una estructura de comunidades, y, a escala macroscópica, la existencia de una ley de potencias en la distribución de las interacciones en la red. El hecho de que estas propiedades aparecen en dos modelos con leyes de evolución cuantitativamente distintas que siguen unos mismos principios adaptativos sugiere que estamos ante un fen��meno que puede ser muy general, y estar en el origen de estas propiedades en sistemas reales. En segundo lugar, proponemos una medida que permite clasificar los elementos de una red compleja en función de su relevancia para el mantenimiento de din��micas colectivas. En concreto, estudiamos la vulnerabilidad de los distintos elementos de una red frente a perturbaciones o grandes fluctuaciones, entendida como una medida del impacto que estos acontecimientos externos tienen en la interrupción de una din��mica colectiva. Los resultados que se obtienen indican que la vulnerabilidad din��mica es sobre todo dependiente de propiedades locales, por tanto nuestras conclusiones abarcan diferentes topologías, y muestran la existencia de una dependencia no trivial entre la vulnerabilidad y la conectividad de los elementos de una red. Finalmente, proponemos una estrategia de imposición de una din��mica objetivo gen��rica en una red dada e investigamos su validez en redes con diversas topologías que mantienen regímenes din��micos turbulentos. Se obtiene como resultado que las redes heterogéneas (y la amplia mayora de las redes reales estudiadas lo son) son las más adecuadas para nuestra estrategia de targeting de din��micas deseadas, siendo la estrategia muy efectiva incluso en caso de disponer de un conocimiento muy imperfecto de la topología de la red. Aparte de la relevancia teórica para la comprensión de fen��menos colectivos en sistemas complejos, los métodos y resultados propuestos podrán dar lugar a aplicaciones en sistemas experimentales y tecnológicos, como por ejemplo los sistemas neuronales in vitro, el sistema nervioso central (en el estudio de actividades síncronas de carácter patológico), las redes eléctricas o los sistemas de comunicaciones. ABSTRACT The time evolution of an ensemble of dynamical systems coupled through an irregular interaction scheme gives rise to dynamics of great of complexity and emergent phenomena that cannot be predicted from the properties of the individual systems. The main objective of this thesis is precisely to increase our understanding of the interplay between the interaction topology and the collective dynamics that a complex network can support. This is a very broad subject, so in this thesis we will limit ourselves to the study of three relevant problems that have strong connections among them. First, it is a well-known fact that in many natural and manmade systems that can be represented as complex networks the topology is not static; rather, it depends on the dynamics taking place on the network (as it happens, for instance, in the neuronal networks in the brain). In these adaptive networks the topology itself emerges from the self-organization in the system. To better understand how the properties that are commonly observed in real networks spontaneously emerge, we have studied the behavior of systems that evolve according to local adaptive rules that are empirically motivated. Our numerical and analytical results show that self-organization brings about two of the most universally found properties in complex networks: at the mesoscopic scale, the appearance of a community structure, and, at the macroscopic scale, the existence of a power law in the weight distribution of the network interactions. The fact that these properties show up in two models with quantitatively different mechanisms that follow the same general adaptive principles suggests that our results may be generalized to other systems as well, and they may be behind the origin of these properties in some real systems. We also propose a new measure that provides a ranking of the elements in a network in terms of their relevance for the maintenance of collective dynamics. Specifically, we study the vulnerability of the elements under perturbations or large fluctuations, interpreted as a measure of the impact these external events have on the disruption of collective motion. Our results suggest that the dynamic vulnerability measure depends largely on local properties (our conclusions thus being valid for different topologies) and they show a non-trivial dependence of the vulnerability on the connectivity of the network elements. Finally, we propose a strategy for the imposition of generic goal dynamics on a given network, and we explore its performance in networks with different topologies that support turbulent dynamical regimes. It turns out that heterogeneous networks (and most real networks that have been studied belong in this category) are the most suitable for our strategy for the targeting of desired dynamics, the strategy being very effective even when the knowledge on the network topology is far from accurate. Aside from their theoretical relevance for the understanding of collective phenomena in complex systems, the methods and results here discussed might lead to applications in experimental and technological systems, such as in vitro neuronal systems, the central nervous system (where pathological synchronous activity sometimes occurs), communication systems or power grids.

Continuum models of the mechanical behavior of rolled and die-cast magnesium alloys

En los últimos años ha habido una fuerte tendencia a disminuir las emisiones de CO2 y su negativo impacto medioambiental. En la industria del transporte, reducir el peso de los vehículos aparece como la mejor opción para alcanzar este objetivo. Las aleaciones de Mg constituyen un material con gran potencial para el ahorro de peso. Durante la última década se han realizado muchos esfuerzos encaminados a entender los mecanismos de deformación que gobiernan la plasticidad de estos materiales y así, las aleaciones de Mg de colada inyectadas a alta presión y forjadas son todavía objeto de intensas campañas de investigación. Es ahora necesario desarrollar modelos que contemplen la complejidad inherente de los procesos de deformación de éstos. Esta tesis doctoral constituye un intento de entender mejor la relación entre la microestructura y el comportamiento mecánico de aleaciones de Mg, y dará como resultado modelos de policristales capaces de predecir propiedades macro- y microscópicas. La deformación plástica de las aleaciones de Mg está gobernada por una combinación de mecanismos de deformación característicos de la estructura cristalina hexagonal, que incluye el deslizamiento cristalográfico en planos basales, prismáticos y piramidales, así como el maclado. Las aleaciones de Mg de forja presentan texturas fuertes y por tanto los mecanismos de deformación activos dependen de la orientación de la carga aplicada. En este trabajo se ha desarrollado un modelo de plasticidad cristalina por elementos finitos con el objetivo de entender el comportamiento macro- y micromecánico de la aleación de Mg laminada AZ31 (Mg-3wt.%Al-1wt.%Zn). Este modelo, que incorpora el maclado y tiene en cuenta el endurecimiento por deformación debido a las interacciones dislocación-dislocación, dislocación-macla y macla-macla, predice exitosamente las actividades de los distintos mecanismos de deformación y la evolución de la textura con la deformación. Además, se ha llevado a cabo un estudio que combina difracción de electrones retrodispersados en tres dimensiones y modelización para investigar el efecto de los límites de grano en la propagación del maclado en el mismo material. Ambos, experimentos y simulaciones, confirman que el ángulo de desorientación tiene una influencia decisiva en la propagación del maclado. Se ha observado que los efectos no-Schmid, esto es, eventos de deformación plástica que no cumplen la ley de Schmid con respecto a la carga aplicada, no tienen lugar en la vecindad de los límites de baja desorientación y se hacen más frecuentes a medida que la desorientación aumenta. Esta investigación también prueba que la morfología de las maclas está altamente influenciada por su factor de Schmid. Es conocido que los procesos de colada suelen dar lugar a la formación de microestructuras con una microporosidad elevada, lo cuál afecta negativamente a sus propiedades mecánicas. La aplicación de presión hidrostática después de la colada puede reducir la porosidad y mejorar las propiedades aunque es poco conocido su efecto en el tamaño y morfología de los poros. En este trabajo se ha utilizado un enfoque mixto experimentalcomputacional, basado en tomografía de rayos X, an��lisis de imagen y an��lisis por elementos finitos, para la determinación de la distribución tridimensional (3D) de la porosidad y de la evolución de ésta con la presión hidrostática en la aleación de Mg AZ91 (Mg- 9wt.%Al-1wt.%Zn) colada por inyección a alta presión. La distribución real de los poros en 3D obtenida por tomografía se utilizó como input para las simulaciones por elementos finitos. Los resultados revelan que la aplicación de presión tiene una influencia significativa tanto en el cambio de volumen como en el cambio de forma de los poros que han sido cuantificados con precisión. Se ha observado que la reducción del tamaño de éstos está íntimamente ligada con su volumen inicial. En conclusión, el modelo de plasticidad cristalina propuesto en este trabajo describe con éxito los mecanismos intrínsecos de la deformación de las aleaciones de Mg a escalas meso- y microscópica. Más especificamente, es capaz de capturar las activadades del deslizamiento cristalográfico y maclado, sus interacciones, así como los efectos en la porosidad derivados de los procesos de colada. ---ABSTRACT--- The last few years have seen a growing effort to reduce CO2 emissions and their negative environmental impact. In the transport industry more specifically, vehicle weight reduction appears as the most straightforward option to achieve this objective. To this end, Mg alloys constitute a significant weight saving material alternative. Many efforts have been devoted over the last decade to understand the main mechanisms governing the plasticity of these materials and, despite being already widely used, high pressure die-casting and wrought Mg alloys are still the subject of intense research campaigns. Developing models that can contemplate the complexity inherent to the deformation of Mg alloys is now timely. This PhD thesis constitutes an attempt to better understand the relationship between the microstructure and the mechanical behavior of Mg alloys, as it will result in the design of polycrystalline models that successfully predict macro- and microscopic properties. Plastic deformation of Mg alloys is driven by a combination of deformation mechanisms specific to their hexagonal crystal structure, namely, basal, prismatic and pyramidal dislocation slip as well as twinning. Wrought Mg alloys present strong textures and thus specific deformation mechanisms are preferentially activated depending on the orientation of the applied load. In this work a crystal plasticity finite element model has been developed in order to understand the macro- and micromechanical behavior of a rolled Mg AZ31 alloy (Mg-3wt.%Al-1wt.%Zn). The model includes twinning and accounts for slip-slip, slip-twin and twin-twin hardening interactions. Upon calibration and validation against experiments, the model successfully predicts the activity of the various deformation mechanisms and the evolution of the texture at different deformation stages. Furthermore, a combined three-dimensional electron backscatter diffraction and modeling approach has been adopted to investigate the effect of grain boundaries on twin propagation in the same material. Both experiments and simulations confirm that the misorientation angle has a critical influence on twin propagation. Non-Schmid effects, i.e. plastic deformation events that do not comply with the Schmid law with respect to the applied stress, are absent in the vicinity of low misorientation boundaries and become more abundant as misorientation angle increases. This research also proves that twin morphology is highly influenced by the Schmid factor. Finally, casting processes usually lead to the formation of significant amounts of gas and shrinkage microporosity, which adversely affect the mechanical properties. The application of hydrostatic pressure after casting can reduce the porosity and improve the properties but little is known about the effects on the casting’s pores size and morphology. In this work, an experimental-computational approach based on X-ray computed tomography, image analysis and finite element analysis is utilized for the determination of the 3D porosity distribution and its evolution with hydrostatic pressure in a high pressure diecast Mg AZ91 alloy (Mg-9wt.%Al-1wt.%Zn). The real 3D pore distribution obtained by tomography is used as input for the finite element simulations using an isotropic hardening law. The model is calibrated and validated against experimental stress-strain curves. The results reveal that the pressure treatment has a significant influence both on the volume and shape changes of individuals pores, which have been precisely quantified, and which are found to be related to the initial pore volume. In conclusion, the crystal plasticity model proposed in this work successfully describes the intrinsic deformation mechanisms of Mg alloys both at the mesoscale and the microscale. More specifically, it can capture slip and twin activities, their interactions, as well as the potential porosity effects arising from casting processes.

Characterisation of the operation & maintenance phase in PV rural electrification programmes

Con 1.300 millones de personas en el mundo sin acceso a la electricidad (la mayoría en entornos rurales de países empobrecidos), la energía solar fotovoltaica constituye una solución viable técnica y econ��micamente para electrificar las zonas más remotas del planeta donde las redes eléctricas convencionales no llegan. Casi todos los países en el mundo han desarrollado algún tipo de programa de electrificación fotovoltaica rural durante los últimos 40 años, principalmente los países más pobres, donde a través de diferentes modelos de financiación, se han instalado millones de sistemas solares domiciliarios (pequeños sistemas fotovoltaicos para uso doméstico). Durante este largo período, se han ido superando muchas barreras, como la mejora de la calidad de los sistemas fotovoltaicos, la reducción de costes, la optimización del diseño y del dimensionado de los sistemas, la disponibilidad financiera para implantar programas de electrificación rural, etc. Gracias a esto, la electrificación rural descentralizada ha experimentado recientemente un salto de escala caracterizada por la implantación de grandes programas con miles de sistemas solares domiciliarios e integrando largos períodos de mantenimiento. Muchos de estos grandes programas se están llevando a cabo con limitado éxito, ya que generalmente parten de supuestos e hipótesis poco contrastadas con la realidad, comprometiendo así un retorno econ��mico que permita el desarrollo de esta actividad a largo plazo. En este escenario surge un nuevo reto: el de cómo garantizar la sostenibilidad de los grandes programas de electrificación rural fotovoltaica. Se argumenta que la principal causa de esta falta de rentabilidad es el imprevisto alto coste de la fase de operación y mantenimiento. Cuestiones clave tales como la estructura de costes de operación y mantenimiento o la fiabilidad de los componentes del sistema fotovoltaico no están bien caracterizados hoy en día. Esta situación limita la capacidad de diseñar estructuras de mantenimiento capaces de asegurar la sostenibilidad y la rentabilidad del servicio de operación y mantenimiento en estos programas. Esta tesis doctoral tiene como objetivo responder a estas cuestiones. Se ha realizado varios estudios sobre la base de un gran programa de electrificación rural fotovoltaica real llevado a cabo en Marruecos con más de 13.000 sistemas solares domiciliarios instalados. Sobre la base de este programa se ha hecho una evaluación en profundidad de la fiabilidad de los sistemas solares a partir de los datos de mantenimiento recogidos durante 5 años con más de 80.000 inputs. Los resultados han permitido establecer las funciones de fiabilidad de los equipos tal y como se comportan en condiciones reales de operación, las tasas de fallos y los tiempos medios hasta el fallo para los principales componentes del sistema, siendo este el primer caso de divulgación de resultados de este tipo en el campo de la electrificación rural fotovoltaica. Los dos principales componentes del sistema solar domiciliario, la batería y el módulo fotovoltaico, han sido analizados en campo a través de una muestra de 41 sistemas trabajando en condiciones reales pertenecientes al programa solar marroquí. Por un lado se ha estudiado la degradación de la capacidad de las baterías y por otro la degradación de potencia de los módulos fotovoltaicos. En el caso de las baterías, los resultados nos han permitido caracterizar la curva de degradación en capacidad llegando a obtener una propuesta de nueva definición del umbral de vida útil de las baterías en electrificación rural. También sobre la base del programa solar de Marruecos se ha llevado a cabo un estudio de caracterización de los costes reales de operación y mantenimiento a partir de la base de datos de contabilidad del programa registrados durante 5 años. Los resultados del estudio han permitido definir cuáles son costes que más incidencia tienen en el coste global. Se han obtenido los costes unitarios por sistema instalado y se han calculado los montantes de las cuotas de mantenimiento de los usuarios para garantizar la rentabilidad de la operación y mantenimiento. Finalmente, se propone un modelo de optimización matemática para diseñar estructuras de mantenimiento basado en los resultados de los estudios anteriores. La herramienta, elaborada mediante programación lineal entera mixta, se ha aplicado al programa marroquí con el fin de validar el modelo propuesto. ABSTRACT With 1,300 million people worldwide deprived of access to electricity (mostly in rural environments), photovoltaic solar energy has proven to be a cost‐effective solution and the only hope for electrifying the most remote inhabitants of the planet, where conventional electric grids do not reach because they are unaffordable. Almost all countries in the world have had some kind of rural photovoltaic electrification programme during the past 40 years, mainly the poorer countries, where through different organizational models, millions of solar home systems (small photovoltaic systems for domestic use) have been installed. During this long period, many barriers have been overcome, such as quality enhancement, cost reduction, the optimization of designing and sizing, financial availability, etc. Thanks to this, decentralized rural electrification has recently experienced a change of scale characterized by new programmes with thousands of solar home systems and long maintenance periods. Many of these large programmes are being developed with limited success, as they have generally been based on assumptions that do not correspond to reality, compromising the economic return that allows long term activity. In this scenario a new challenge emerges, which approaches the sustainability of large programmes. It is argued that the main cause of unprofitability is the unexpected high cost of the operation and maintenance of the solar systems. In fact, the lack of a paradigm in decentralized rural services has led to many private companies to carry out decentralized electrification programmes blindly. Issues such as the operation and maintenance cost structure or the reliability of the solar home system components have still not been characterized. This situation does not allow optimized maintenance structure to be designed to assure the sustainability and profitability of the operation and maintenance service. This PhD thesis aims to respond to these needs. Several studies have been carried out based on a real and large photovoltaic rural electrification programme carried out in Morocco with more than 13,000 solar home systems. An in���depth reliability assessment has been made from a 5‐year maintenance database with more than 80,000 maintenance inputs. The results have allowed us to establish the real reliability functions, the failure rate and the main time to failure of the main components of the system, reporting these findings for the first time in the field of rural electrification. Both in���field experiments on the capacity degradation of batteries and power degradation of photovoltaic modules have been carried out. During the experiments both samples of batteries and modules were operating under real conditions integrated into the solar home systems of the Moroccan programme. In the case of the batteries, the results have enabled us to obtain a proposal of definition of death of batteries in rural electrification. A cost assessment of the Moroccan experience based on a 5‐year accounting database has been carried out to characterize the cost structure of the programme. The results have allowed the major costs of the photovoltaic electrification to be defined. The overall cost ratio per installed system has been calculated together with the necessary fees that users would have to pay to make the operation and maintenance affordable. Finally, a mathematical optimization model has been proposed to design maintenance structures based on the previous study results. The tool has been applied to the Moroccan programme with the aim of validating the model.

Development and implementation of an air quality integrated assessment modelling system for the Iberian Peninsula

La mejora de la calidad del aire es una tarea eminentemente interdisciplinaria. Dada la gran variedad de ciencias y partes involucradas, dicha mejora requiere de herramientas de evaluación simples y completamente integradas. La modelización para la evaluación integrada (integrated assessment modeling) ha demostrado ser una solución adecuada para la descripción de los sistemas de contaminación atmosférica puesto que considera cada una de las etapas involucradas: emisiones, química y dispersión atmosférica, impactos ambientales asociados y potencial de disminución. Varios modelos de evaluación integrada ya están disponibles a escala continental, cubriendo cada una de las etapas antesmencionadas, siendo el modelo GAINS (Greenhouse Gas and Air Pollution Interactions and Synergies) el más reconocido y usado en el contexto europeo de toma de decisiones medioambientales. Sin embargo, el manejo de la calidad del aire a escala nacional/regional dentro del marco de la evaluación integrada es deseable. Esto sin embargo, no se lleva a cabo de manera satisfactoria con modelos a escala europea debido a la falta de resolución espacial o de detalle en los datos auxiliares, principalmente los inventarios de emisión y los patrones meteorológicos, entre otros. El objetivo de esta tesis es presentar los desarrollos en el diseño y aplicación de un modelo de evaluación integrada especialmente concebido para España y Portugal. El modelo AERIS (Atmospheric Evaluation and Research Integrated system for Spain) es capaz de cuantificar perfiles de concentración para varios contaminantes (NO2, SO2, PM10, PM2,5, NH3 y O3), el depósito atmosférico de especies de azufre y nitrógeno así como sus impactos en cultivos, vegetación, ecosistemas y salud como respuesta a cambios porcentuales en las emisiones de sectores relevantes. La versión actual de AERIS considera 20 sectores de emisión, ya sea equivalentes a sectores individuales SNAP o macrosectores, cuya contribución a los niveles de calidad del aire, depósito e impactos han sido modelados a través de matrices fuentereceptor (SRMs). Estas matrices son constantes de proporcionalidad que relacionan cambios en emisiones con diferentes indicadores de calidad del aire y han sido obtenidas a través de parametrizaciones estadísticas de un modelo de calidad del aire (AQM). Para el caso concreto de AERIS, su modelo de calidad del aire “de origen��� consistió en el modelo WRF para la meteorología y en el modelo CMAQ para los procesos químico-atmosféricos. La cuantificación del depósito atmosférico, de los impactos en ecosistemas, cultivos, vegetación y salud humana se ha realizado siguiendo las metodologías estándar establecidas bajo los marcos internacionales de negociación, tales como CLRTAP. La estructura de programación está basada en MATLAB®, permitiendo gran compatibilidad con software típico de escritorio comoMicrosoft Excel® o ArcGIS®. En relación con los niveles de calidad del aire, AERIS es capaz de proveer datos de media anual y media mensual, así como el 19o valor horario más alto paraNO2, el 25o valor horario y el 4o valor diario más altos para SO2, el 36o valor diario más alto para PM10, el 26o valor octohorario más alto, SOMO35 y AOT40 para O3. En relación al depósito atmosférico, el depósito acumulado anual por unidad de area de especies de nitrógeno oxidado y reducido al igual que de azufre pueden ser determinados. Cuando los valores anteriormente mencionados se relacionan con características del dominio modelado tales como uso de suelo, cubiertas vegetales y forestales, censos poblacionales o estudios epidemiológicos, un gran n��mero de impactos puede ser calculado. Centrándose en los impactos a ecosistemas y suelos, AERIS es capaz de estimar las superaciones de cargas críticas y las superaciones medias acumuladas para especies de nitrógeno y azufre. Los daños a bosques se calculan como una superación de los niveles críticos de NO2 y SO2 establecidos. Además, AERIS es capaz de cuantificar daños causados por O3 y SO2 en vid, maíz, patata, arroz, girasol, tabaco, tomate, sandía y trigo. Los impactos en salud humana han sido modelados como consecuencia de la exposición a PM2,5 y O3 y cuantificados como pérdidas en la esperanza de vida estadística e indicadores de mortalidad prematura. La exactitud del modelo de evaluación integrada ha sido contrastada estadísticamente con los resultados obtenidos por el modelo de calidad del aire convencional, exhibiendo en la mayoría de los casos un buen nivel de correspondencia. Debido a que la cuantificación de los impactos no es llevada a cabo directamente por el modelo de calidad del aire, un an��lisis de credibilidad ha sido realizado mediante la comparación de los resultados de AERIS con los de GAINS para un escenario de emisiones determinado. El an��lisis reveló un buen nivel de correspondencia en las medias y en las distribuciones probabilísticas de los conjuntos de datos. Las pruebas de verificación que fueron aplicadas a AERIS sugieren que los resultados son suficientemente consistentes para ser considerados como razonables y realistas. En conclusión, la principal motivación para la creación del modelo fue el producir una herramienta confiable y a la vez simple para el soporte de las partes involucradas en la toma de decisiones, de cara a analizar diferentes escenarios “y si” con un bajo coste computacional. La interacción con políticos y otros actores dictó encontrar un compromiso entre la complejidad del modeladomedioambiental con el carácter conciso de las políticas, siendo esto algo que AERIS refleja en sus estructuras conceptual y computacional. Finalmente, cabe decir que AERIS ha sido creado para su uso exclusivo dentro de un marco de evaluación y de ninguna manera debe ser considerado como un sustituto de los modelos de calidad del aire ordinarios. ABSTRACT Improving air quality is an eminently inter-disciplinary task. The wide variety of sciences and stakeholders that are involved call for having simple yet fully-integrated and reliable evaluation tools available. Integrated AssessmentModeling has proved to be a suitable solution for the description of air pollution systems due to the fact that it considers each of the involved stages: emissions, atmospheric chemistry, dispersion, environmental impacts and abatement potentials. Some integrated assessment models are available at European scale that cover each of the before mentioned stages, being the Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) model the most recognized and widely-used within a European policy-making context. However, addressing air quality at the national/regional scale under an integrated assessment framework is desirable. To do so, European-scale models do not provide enough spatial resolution or detail in their ancillary data sources, mainly emission inventories and local meteorology patterns as well as associated results. The objective of this dissertation is to present the developments in the design and application of an Integrated Assessment Model especially conceived for Spain and Portugal. The Atmospheric Evaluation and Research Integrated system for Spain (AERIS) is able to quantify concentration profiles for several pollutants (NO2, SO2, PM10, PM2.5, NH3 and O3), the atmospheric deposition of sulfur and nitrogen species and their related impacts on crops, vegetation, ecosystems and health as a response to percentual changes in the emissions of relevant sectors. The current version of AERIS considers 20 emission sectors, either corresponding to individual SNAP sectors or macrosectors, whose contribution to air quality levels, deposition and impacts have been modeled through the use of source-receptor matrices (SRMs). Thesematrices are proportionality constants that relate emission changes with different air quality indicators and have been derived through statistical parameterizations of an air qualitymodeling system (AQM). For the concrete case of AERIS, its parent AQM relied on the WRF model for meteorology and on the CMAQ model for atmospheric chemical processes. The quantification of atmospheric deposition, impacts on ecosystems, crops, vegetation and human health has been carried out following the standard methodologies established under international negotiation frameworks such as CLRTAP. The programming structure isMATLAB ® -based, allowing great compatibility with typical software such as Microsoft Excel ® or ArcGIS ® Regarding air quality levels, AERIS is able to provide mean annual andmean monthly concentration values, as well as the indicators established in Directive 2008/50/EC, namely the 19th highest hourly value for NO2, the 25th highest daily value and the 4th highest hourly value for SO2, the 36th highest daily value of PM10, the 26th highest maximum 8-hour daily value, SOMO35 and AOT40 for O3. Regarding atmospheric deposition, the annual accumulated deposition per unit of area of species of oxidized and reduced nitrogen as well as sulfur can be estimated. When relating the before mentioned values with specific characteristics of the modeling domain such as land use, forest and crops covers, population counts and epidemiological studies, a wide array of impacts can be calculated. When focusing on impacts on ecosystems and soils, AERIS is able to estimate critical load exceedances and accumulated average exceedances for nitrogen and sulfur species. Damage on forests is estimated as an exceedance of established critical levels of NO2 and SO2. Additionally, AERIS is able to quantify damage caused by O3 and SO2 on grapes, maize, potato, rice, sunflower, tobacco, tomato, watermelon and wheat. Impacts on human health aremodeled as a consequence of exposure to PM2.5 and O3 and quantified as losses in statistical life expectancy and premature mortality indicators. The accuracy of the IAM has been tested by statistically contrasting the obtained results with those yielded by the conventional AQM, exhibiting in most cases a good agreement level. Due to the fact that impacts cannot be directly produced by the AQM, a credibility analysis was carried out for the outputs of AERIS for a given emission scenario by comparing them through probability tests against the performance of GAINS for the same scenario. This analysis revealed a good correspondence in the mean behavior and the probabilistic distributions of the datasets. The verification tests that were applied to AERIS suggest that results are consistent enough to be credited as reasonable and realistic. In conclusion, the main reason thatmotivated the creation of this model was to produce a reliable yet simple screening tool that would provide decision and policy making support for different “what-if” scenarios at a low computing cost. The interaction with politicians and other stakeholders dictated that reconciling the complexity of modeling with the conciseness of policies should be reflected by AERIS in both, its conceptual and computational structures. It should be noted however, that AERIS has been created under a policy-driven framework and by no means should be considered as a substitute of the ordinary AQM.

A catalogue of books in the College library: [which Benjamin Welles wished to read], 1797

In this small paper-bound catalog, Benjamin Welles (1781-1860) listed books in the Harvard College Library which he wished to read. He presumably compiled the list by consulting the Library's 1790 printed catalog, as the works are categorized according to subjects outlined in that catalog (Antiquities, Astronomy, Ancient Authors, Biography, Sacred Criticism, Ethics, Geography, Geometry, History, Nature, Travels / Voyages, Natural Law, Logic, Metaphysics, Miscellaneous Works, Dramatic, Phililogy, Natural Philosophy, Poetry, Rhetoric, and Theology). The final pages of Welles' catalog, which he titles "Another Selection," list additional volumes he wished to read. These are listed alphabetically, A - G. Some titles throughout the catalog have been marked with a "+" perhaps to indicate that Welles had read them.

Collection of Harvard College bills sent to George Wingate, 1792-1796

This collection of bills, sent to George Wingate while he was an undergraduate at Harvard College from 1792 to 1796, includes quarter bills, butler's bills, and bills and receipts of payment from two women, Mary Hilliard and Mary Kidder, who provided Wingate room and board ("board and chamber"). The butlers bills were created by the two men who held that position during Wingate's time as a student, John Pipon and Timothy Alden. Caleb Gannett was the steward the entire time, and thus creator of all the quarter bills. Some of the bills indicate charges for sizings and fines for punishments, and a bill from Mary Hilliard indicates that Wingate purchased candles, blank books and sheets of paper from her.

Rubbing of the gravestone of Harvard librarian Nathaniel Ward made by David S. Ferriero, October 15, 1972

Large rubbing of the gravestone of Nathaniel Ward, librarian of Harvard college for one week in 1768. The rubbing was made by David S. Ferriero, and is signed and dated October 15, 1972 in the lower right corner.

The life of General Ely S. Parker, last grand sachem of the Iroquois and General Grant's military secretary,

The Measure of the Man -- The Valley of the Rapid Water -- How the Senecas Made War Upon Great Britain -- The Grand-Daughter of the Prophet -- Boyhood Days on the Reservatio -- The Way the Twig Was Bent -- Lewis H. Morgan and the "New League of the Iroquois" -- Early Experience as an Engineer and Masonic Career -- How Parker's Enlistment was Refused by Secretary Seward -- A Sachem Becomes a Warrior -- The Fall of the Confederacy -- The Indian in the Drama at Appomattox -- The Warrior After the War -- An Indian Commissioner of Indian Affairs -- A Sachem's Letters to a Poetess -- The Gettysburg Speech of Grant's Military Secretary -- The House of Brother Nicholson -- The Bones of Red Jacket -- The Last Grand Sachem.