La opción radical : viaje a través de Superstudio

Entre 1966 y 1967 un pequeño grupo de jóvenes arquitectos recién titulados en la Facultad de Arquitectura de Florencia escenifican en dos actos programados en las ciudades de Pistoia y Módenala exposición Superarchitettura, con la que sin saberlo inauguran un corto pero intenso periodo de experimentación arquitectónica que convulsionaría Italia durante los 10 años posteriores, dinamitados por multitud de propuestas que darán lugar a la última arquitectura con aspiraciones socio-políticas responsable de un vibrante legado teórico que proclamaba la vuelta a las raíces olvidadas de la profesión y que se mostraba más preocupada por reflexionar sobre sus fundamentos que por perpetuar la práctica de un oficio ahora puesto en crisis. Ambos eventos suponen también el nacimiento simultáneo de Superstudio y Archizoom, dos de los colectivos más influyentes de la arquitectura experimental italiana de estos años, convertidos en protagonistas de un agitado periodo de transición en el que una generación estaba dando paso a la siguiente a través de la sustitución de los principios doctrinarios recibidos de la modernidad por una jugosa incertidumbre desmitificadora ligada a una nueva realidad económica, política y social que marcaría los inicios de la posmodernidad. La experiencia italiana surge aprovechando la efervescencia de un fenómeno que posteriormente algunos críticos etiquetaron como Arquitectura Radical con la intención de unificar el trabajo de un heterogéneo y atomizado grupo de arquitectos fundamentalmente europeos – individualmente comprometidos con el replanteamiento total de la definición y objetivos de la disciplina, al tiempo que participaban en una particular cruzada existencial mediante la que pretendían, si no cambiar el mundo, al menos romper la dinámica estéril de la arquitectura profesional y tecnológica heredada. La presente tesis fomenta la recuperación interesada de este breve momento radical como un ambicioso proyecto de modernización inacabado, pero no solo para analizar las causas de su precipitado final, sino sobre todo para mostrar las razones de su gran éxito internacional, convirtiendo para ello el trabajo de Superstudio, ejemplo paradigmático de la actitud crítica compartida por el resto de operadores contemporáneos, en el catalizador adecuado a partir del cual interpretar y extrapolar su legado con el fin de narrar el cambio trascendental que este episodio supuso para la práctica arquitectónica, alejándola del diseño de edificios y centrándola en la adopción y aplicación de multitud de actividades no tectónicas en un intento por separarse de lo que era percibido como una disciplina corrupta. A lo largo de su corta carrera en común, los seis miembros de Superstudio sustituyeron la construcción convencional por la explotación intensiva de medios alternativos desde el diseño de mobiliario e iluminación y algunos experimentos en torno a la “arquitectura eléctrica”, hasta la expansión mediática de su trabajo a través de revistas, películas, exposiciones y conferencias contribuyendo así a una provocativa destrucción y posterior expansión de los límites dentro de los que hasta ese momento se había mantenido cómodamente instalada la arquitectura. Esta investigación descubre la trascendencia de considerar aquello que ocupó gran parte de la actividad de Superstudio y de sus colegas radicales (muebles, revistas, instalaciones, películas, labor teórica y docente, etc.) como nuevas formas de arquitectura con las que construir un nuevo lenguaje crítico, en un intento por contribuir a renovar y reforzar la relevancia y responsabilidad social de una profesión llamada a expandirse más allá de lo construido para nutrirse e interactuar con todos los ámbitos de nuestro entorno diario. ABSTRACT Between 1966 and 1967 a small group of newly qualified young architects from the Faculty of Architecture of Florence staged in two events planned in the cities of Pistoia and Modena the Superarchitettura exhibition, with which unwittingly inaugurated a short but intense period of architectural experimentation that convulse Italy during the following 10 years, blown up by a multitude of proposals that will result in the latest architecture with socio political aspirations responsible for a vibrant theoretical legacy proclaiming a return to forgotten roots of the profession and that was more concerned with reflect on its fundamentals than perpetuate the practice of a profession now put into crisis. Both events also involve the simultaneous birth of Superstudio and Archizoom, two of the most influential groups of Italian experimental architecture of these years, turned into protagonists of an hectic period of transition in which a generation was giving way to the next through replacing the received doctrinal principles of modernity by a juicy demystifying uncertainty linked to a new reality economic, political and social that would mark the beginning of postmodernism. The Italian experience arises taking advantage of the commotion of a phenomenon that later some critics labeled as Radical Architecture with the intention of unifying the work of a diverse and fragmented group of architects mainly European individually committed to the total rethinking of the definition and objectives of the discipline, while participating in a particular existential crusade with which they sought to, if not change the world, at least break out of the sterile dynamic of professional and technological architecture inherited. This doctoral thesis promotes an interested recovery of in this short radical time as an ambitious modernization project unfinished, but not only to analyze the causes of its precipitous end, but above all to show the reasons for it’s international success, turning the work of Superstudio, a paradigmatic example of the critical attitude shared by the rest of contemporary operators, into the suitable catalyst from which to interpret and extrapolate it’s legacy in order to recount the significant change that this episode marked for architectural practice, moving it away from building and focusing it on the adoption and implementation of many nonLtectonic activities in an attempt to separate from what was perceived as a corrupt discipline. Throughout their short career in common, the six members of Superstudio replaced conventional construction by intensive exploitation of alternative means L from furniture and lighting design and some experiments around the "electric architecture", to the media expansion of their work through magazines, films, exhibitions and lectures thus contributing to a provocative destruction and subsequent expansion of the limits within which architecture had remained ensconced until then. This dissertation finds out the importance of considering what occupied much of the activity of Superstudio and their radical colleagues (furniture, magazines, installations, films, theoretical and educational work, etc.) as new forms of architecture that build a new critical language, in an attempt to help renew and reinforce the relevance and social responsibility of a profession call to expand beyond the built to nourish and interact with all areas of our everyday environment.

Elementos peatonales de las ciudades medias españolas : tipos, orígenes, relaciones y articulaciones

A través de esta tesis se busca aportar un análisis de los elementos peatonales que cubren las necesidades y las infraestructuras de apoyo al peatón, siendo un campo poco desarrollado en nuestro país a diferencia de otros como Dinamarca, Reino Unido, Alemania y Holanda, donde las actuaciones peatonales ejecutadas son tradicionales y muy exitosas. Se trata por tanto de un tema poco estudiado pero que adquiere singular importancia en estos años de búsqueda de nuevos modelos urbanos que eviten el derroche de recursos, y avancen hacia formas de movilidad más adecuadas a un mundo limitado y vulnerable. La investigación tiene un carácter eminentemente descriptivo cuyo principal valor es documentar y analizar sistemáticamente una realidad poco conocida, aportándose datos para entender el origen y desarrollo de las actuaciones peatonales. El propósito es ayudar a cimentar este campo en nuestro país, definiendo con precisión el estado de la cuestión geográficamente y dejando para un futuro una cartografía temática completa. El objeto general es estudiar y comprender los elementos peatonales de un número limitado de ciudades medias españolas, marcándose como objetivos específicos los siguientes: - Identificar y describir los principales elementos que conforman la red peatonal de las ciudades. ‐ Estudiar las tipologías espaciales dominantes, sus características y orígenes, pudiendo distinguir de un lado, las desarrolladas en la ciudad consolidada, como las actuaciones en los cascos antiguos; y por otro, las ejecutadas en la ciudad nueva a través de fórmulas arquitectónicas generalmente residenciales con espacios peatonales adjuntos. ‐ Analizar los referidos elementos para comprobar si han conformado redes de uso peatonal, si se han constituido articulando la ciudad como en el caso de los ejes lineales en las ciudades con río o mar, o si han influenciado el carácter del entorno en el que se han realizado, centrando el interés en los cascos históricos peatonalizados. ‐ Comprobar si hay actuaciones complementarias a los procesos de urbanización y mejora urbanística, así como la aprobación de ayudas y subvenciones para afrontar las mismas. ‐ Finalmente, describir y evaluar los procesos y procedimientos mediante los que se produce la peatonalización de determinadas áreas urbanas, los orígenes, los instrumentos y fechas de su puesta en marcha, aportando una cronología peatonal. La metodología comienza con la acotación de 22 ciudades españolas, capitales de provincia con una población entre 100.000 y 500.000 habitantes según los datos del INE del año 2009. La distribución es equilibrada con la selección de ciudades de costa, de interior, con río/ría, con carácter patrimonial, ciudades en islas, etc. El análisis de los elementos peatonales de estas urbes se realiza gracias a la gran resolución de las bases cartográficas públicas y privadas que hay en la actualidad en internet, especialmente con el uso de las herramientas de Google Earth y Google Maps en su versión “street view”, softwares que permiten un paseo virtual de cada ciudad detallándose con gran precisión las actuaciones peatonales. Las ciudades elegidas son: ‐ 11 ciudades costeras: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián y Tarragona. ‐ 11 ciudades de interior: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid y Vitoria. Finalmente, por tener los porcentajes mas elevados de las áreas peatonales de sus casco histórico, se eligen 3 casos de ciudades representativas para un desarrollo peatonal en profundidad, seleccionándose Burgos, San Sebastián y Pamplona. Otros aspectos metodológicos interesantes a destacar, es la extensa documentación adquirida a través de las fuentes de Internet, sobre todo a la hora de desarrollar el último capítulo “Procesos de peatonalización de las ciudades españolas” centrado en las 3 ciudades elegidas. Se consulta las hemerotecas de periódicos locales, los boletines oficiales, las actas de los plenos de los Ayuntamientos y los documentos de planificación (Planes Generales, Planes Especiales, Planes y Proyectos Municipales, Planes de Movilidad), adquiriéndose una precisa información en cuanto a la cronología de las fechas y extensión del trabajo. Se complementa la metodología con las entrevistas a actores claves en el proceso peatonal, como el personal técnico de los Ayuntamiento y los técnicos redactores de los proyectos; y con la colaboración directa de los técnicos de los consistorios de las 3 ciudades seleccionadas, aportando todo tipo de información demandada. En la tesis, se introduce los elementos peatonales mediante el estudio de los espacios peatonales y los procesos de peatonalización existentes, a través del análisis de la literatura consultada aportándose información valiosa en cuanto a la definición de los modelos peatonales, exponiéndose una breve historia de las peatonalizaciones. Destacan las publicaciones de los expertos europeos en la materia como los autores Carmen Hass-Klau, Rolf Monheim, Rob Krier y Collin Buchanan. En España, las actuaciones peatonales fueron tardías en el tiempo en comparación con el resto de Europa, con casi 40 años de retraso. Las referencias bibliográficas españolas en esta materia son escasas siendo las mas significativas las realizadas por Alfonso Sanz y por el profesor Julio Pozueta destacando una de sus últimas publicaciones “La ciudad paseable” describiéndose los elementos peatonales existentes en las ciudades, sirviendo como modelo y ejemplo para esta investigación. En base a lo anterior, se definen los elementos peatonales como aquellos espacios públicos libres de edificación que, por sus características y diseño, garantizan un confortable uso estancial, de tránsito peatonal y están expresamente reservados para ello. En la tesis se detectan y se especifican los siguientes elementos peatonales: las calles y plazas peatonales, las aceras y bulevares de una anchura superior a 8 metros, los paseos peatonales, los elementos de paso (tradicionales y mecánicos), espacios peatonales ligados a nuevas áreas residenciales, los soportales y pasajes peatonales con una anchura mínima de 4 metros, recintos feriales, espacios libres y zonas verdes y parques. Para cada una de las 22 ciudades seleccionadas se realiza un exhaustivo inventario de los anteriores elementos a través de fichas, aportando un gran número de proyectos individuales ejecutados en cada urbe. Esta información se recoge gráficamente en 2 fotoplanos, conformándose como herramientas fundamentales para esta investigación. El Fotoplano 1 se hace sobre la base de la ciudad del Google Earth diferenciándose las áreas peatonales y las zonas verdes. En el Fotoplano 2, y con el soporte anterior, se distinguen las tipologías persistentes y dominantes como son los grandes ejes peatonales, las redes peatonales locales y los elementos peatonales singulares. Finalmente, a partir de los 2 fotoplanos, se realiza la denominada “Huella peatonal” que destaca por su atractivo y pregnancia, algo de lo que el campo de lo peatonal es muy útil. A través de la huella se obtiene una rápida información al tener el plano dos colores, color naranja para lo peatonal (formado por las áreas peatonales y zonas verdes) y color negro para el resto el resto no peatonal. Toda esta documentación gráfica y descriptiva de los elementos peatonales de cada ciudad, queda ampliamente recogida en el Anexo de la tesis. La “Huella peatonal” se considera como el plano básico en la investigación obteniendo una percepción rápida, clara y visual del espacio peatonal de cada ciudad. Se arroja información morfológica con respecto a la distribución espacial, articulación, equilibrio, modulación, cohesión, concentración peatonal, etc. de cada una de las ciudades seleccionadas. A través de la huella se resuelve muchos de las cuestiones enmarcadas como objetivos de la tesis, comprobándose de forma general, que los elementos peatonales dentro de la trama urbana están desarticulados ya que no hay una estructura que module la ciudad como un conjunto cohesionado. Se localizan pequeñas redes conectadas entre sí, que de forma heterogénea, están dispersas por la ciudad. Se verifica que los elementos peatonales con mayor concentración y presencia en las ciudades analizadas son los ejes peatonales, los cascos históricos y los elementos peatonales en las nuevas áreas residenciales. En la investigación, además de estos 3 elementos mencionados, se analiza con mayor profundidad otros tipos que destacan por su persistencia y repetición en la “Huella peatonal” de cada una de las 22 ciudades, como son las plazas peatonales, los soportales y los elementos singulares peatonales: espacios tradicionales (recintos feriales, pasajes, puentes históricos), nuevos elementos peatonales (pasarelas peatonales, elementos mecánicos de paso), áreas peatonales entorno a edificios culturales y otros casos como los consistentes en la recuperación y transformación de edificaciones y construcciones urbanas de diferente uso y tipología, en nuevas áreas peatonales. Se aporta luz sobre su definición, localización, cronología, proporción, presencia y génesis, facilitando resultados de cada uno de ellos. De forma paralela, se obtiene información de índole cuantitativa a través de las mediciones de la huella, obteniéndose datos y porcentajes de extensión de la ciudad, de las zonas peatonales y de las zonas verdes, de los cascos históricos y de sus superficies peatonales, de los metros lineales de dichos cascos históricos y de sus calles peatonales. Se proporcionan ratios e índices que se consideran fundamentales para una mejor comprensión peatonal de cada urbe. Se establece una clasificación de las ciudades en cada uno de los ámbitos descritos, destacando las ciudades de Pamplona, San Sebastián y Burgos por arrojar las cifras peatonales más positivas encabezando la mayoría de las tablas clasificatorias. La peor ciudad valorada es Alicante, seguida según criterio, de Almería, Palma de Mallorca y Las Palmas de GC. En el capítulo final de la investigación, se eligen las ciudades de Burgos, San Sebastián y Pamplona como casos de estudio representativos. El objetivo es obtener un conocimiento más preciso en cuanto a su origen, cronología y procesos de las peatonalizaciones. Cada ciudad se compone de un cuadro cronológicos por etapas, desarrollándose de forma exhaustiva cada una de ellas, enunciadas normalmente, como instrumentos de planeamiento o proyectos de urbanización, acompañadas de los planos de las actuaciones peatonales. Al final de cada etapa se aportan datos de las cifras de las peatonalizaciones que se van realizando, con un cuadro numérico de localizaciones, superficie peatonal, superficie reurbanizada, longitud peatonal y el grado de peatonalización del casco histórico, además de los datos acumulados por etapa. De las conclusiones cruzadas de estas 3 ciudades, destaca la comprobación de la tendencia de ir peatonalizando los centros antiguos llegando incluso al 100% de calles peatonales en el caso de San Sebastián. No obstante, es difícil confirmar si el objetivo es una peatonalización global de los cascos, ya que son muchas las variables que afectan e influyen en el proceso peatonal de cada ciudad. Se coteja adicionalmente cómo se extiende la cultura peatonal desde el interior al exterior, mas allá de los cascos históricos hacia los ensanches próximos. En cuanto al origen de las peatonalizaciones, se concluye que no hay una concepción inicial y teórica marcada, a partir de la cual se va desarrollando la trama peatonal de cada ciudad. Se puede afirmar que los procesos peatonales ejecutados son variados y de diversa índole, sin poder precisar un hecho como causa principal. Según el momento y las circunstancias, las peatonalizaciones responden a distintas iniciativas promovidas por los comerciantes, por las administraciones locales o por los técnicos de planeamiento, con sus expertas aportaciones en los planes. Estos tres agentes actúan como impulsores de proyectos individuales peatonales que se van solapando en el tiempo. Como punto final de la tesis, se propone una serie de nuevas líneas de investigación que pueden servir como estudio adicional y complementario, respondiendo a aspectos tan relevantes como cuestiones de índole económica, social y de movilidad, fuertemente ligadas a las peatonalizaciones, tal y como se demuestra en la literatura consultada. ABSTRACT This thesis aims to analyse the pedestrian elements dealing with the needs and infrastructures that support pedestrians, as this is a field that is little developed in our country, in comparison to other regions such as Denmark, the United Kingdom, Germany and the Netherlands, where the pedestrian actions implemented are traditional and highly successful. Therefore, even though little research has been done about this topic, this field is increasingly important throughout these years of search for urban models intended to prevent the waste of resources and to develop new mobility ways, more adapted to a limited, vulnerable world. This research is essentially descriptive and it mainly aims to document and systematically analysed a scarcely known reality by providing data in order to understand the origin and development of pedestrian actions. This thesis intends to lay the foundations of this field in Spain, accurately defining the state of the art from a geographical point of view and preparing a full thematic map that may be used in the future. The overall aim is to study and understand the pedestrian elements of a limited number of Spanish medium-size cities, establishing the following specific goals: - To identify and describe the main elements comprising cities' pedestrian networks. - To study of special predominant typologies, their features and origins, with the possibility to, on the one hand, make a difference between the typologies developed in well-established cities, such as the actions in historic quarters, and, on the other hand, those implemented in new cities through generally residential architectural formulae with adjoining pedestrian areas. - To analyse the said elements in order to check whether they have resulted in pedestrian-use networks, whether they have been established by organising the city, such as the linear axes in coastal and riverside cities, or whether they have had an impact on the character of the areas where these elements have been implemented, focusing on pedestrian historic quarters. - Check whether there are actions supplementary to the urban development and urban improvement processes, as well as the approval of financial support and subventions to deal with these actions. - Finally, to describe and assess the processes and procedures by which the pedestrianisation of certain urban areas is carried out, the origins, the instruments and the date of their implementation, providing a pedestrian timeline. The methodology starts by defining 22 Spanish cities, province capitals with a population ranging from 100,000 to 500,000 inhabitants, according to the data recorded by the Spanish Statistics Institute (INE) in 2009. The distribution of coastal, riverside and interior cities, as well as of patrimonial cities and cities in islands, etc. is well balanced. The analysis of the pedestrian elements of these cities is made with the great resolution of the public and private map databases that can be accessed on the Internet, especially using the "street-view" version of tools such as Google Earth and Google Maps, software applications that allow to go for a virtual walk in each city, providing highly precise details about the pedestrian actions. The following cities have been chosen: ‐ 11 coastal cities: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián and Tarragona. ‐ 11 interior cities: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid and Vitoria. Finally, as they have the highest percentages regarding the pedestrian areas found in the historic quarters, 3 cities representing a deep pedestrian development have been chosen: Burgos, San Sebastián and Pamplona. Other significant methodological aspects are the many documents found from online sources, especially when preparing the last chapter: “Processes for the pedestrianisation of Spanish cities”, which focuses on the 3 cities chosen. Local newspaper and periodical libraries, official gazettes, the minutes of plenary sessions of councils and the zoning regulation documents (General Zoning Plans, Special Zoning Plans, Municipal Plans and Projects, Mobility Plans, etc.) have been consulted, obtaining accurate information regarding the timeline and the extension of the works carried out. The methodology is supplemented by interviews with key players in the pedestrianisation process, such as the technical staff in councils and the officers drafting and designing the projects, as well as with the direct collaboration by the officers of the councils of the 3 cities chosen, who provided all the information requested. The thesis introduces the pedestrian elements by studying pedestrian areas and existing pedestrianisation processes through the analysis of the literature consulted, providing valuable information for the definition of pedestrian models and showing a brief history and background of the pedestrianisation process. Remarkable papers published by some European experts in the field, such as Carmen Hass-Klau, Rolf Monheim and Collin Buchanan, are covered in the thesis. In Spain, the pedestrianisation actions were late in time in comparison to the rest of Europe, with at least 40 years of delay. The Spanish literature references in this field are limited. The most significant papers are those published by Alfonso Sanz and by Professor Julio Pozueta, with a special mention of one of his last works "La ciudad paseable" (The Walkable City), which describes the pedestrian elements found in the cities and is used a model and an example for this research. Based on the elements above, pedestrian elements are defined as those construction-free public areas that, due to their features and design, ensure the comfortable, convenient use of the spaces, characterised by pedestrian traffic and specifically reserved for this purpose. The thesis detects and specifies the following pedestrian elements: pedestrian streets and squares, pavements (sidewalks) and boulevards with a width exceeding 8 metres, pedestrian promenades, crossing elements (traditional and mechanical), pedestrian spaces linked to new residential areas, colonnades and pedestrian passages or narrow streets with a minimum width of 4 metres, exhibition sites, free spaces and green areas and parks. For each of the 22 cities chosen, a thorough inventory of the elements mentioned above has been made by using worksheets, providing a significant number of individual projects developed in each city. This information is graphically collected and displayed on 2 photomaps, resulting in tools essential for this research. Photomap 1 is made based on the city displayed by Google Earth, making a difference between pedestrian areas and green areas. On Photomap 2, using the tool mentioned above, a difference can be made between persistent and predominant typologies, such as the big pedestrian axes, the local pedestrian networks and singular pedestrian elements. Finally, the 2 photomaps are used in order to establish the so-called "pedestrian footprint", which is highlighted by its attractiveness and appeal, concepts for which the pedestrian field is very useful. With the pedestrian footprint, quick information can be obtained, since the map shows two colours: orange for pedestrian elements (made up of pedestrian areas and green areas) and black for the other non-pedestrian elements. A significant part of these graphic, descriptive documents about each city's pedestrian elements can be found in the thesis appendix. The "Pedestrian Footprint" is regarded in the research as the basic map, obtaining a quick, clear and visual perception of each city's pedestrian space. This footprint provides morphological information regarding the space distribution, the organisation, the balance, the modulation, the cohesion, the pedestrian concentration, etc. in each of the cities chosen. The pedestrian footprint helps solve many of the questions established as the thesis goals, proving that, in general, the pedestrian elements are not organised in the urban plot, as there is no structure modulating the city as a properly linked set of elements. Small networks linked to each other and heterogeneously scattered all over the city are found. It has been verified that the pedestrian elements with the highest concentration and presence in the cities analysed are the pedestrian axes, the historic quarters and the pedestrian elements found in the new residential areas. Besides these 3 elements mentioned, the research analyses in depth other types that are remarkable due to their persistence and repetition in the "Pedestrian Footprint" of each of the 22 cities, such as the pedestrian squares, the colonnades and the singular pedestrian elements: traditional spaces (exhibition sites, passages, historic bridges), new pedestrian elements (pedestrian footbridges, mechanical crossing elements), pedestrian areas around cultural buildings and other cases such as those consisting of recovering and transforming building and urban constructions, intended for a wide range of purposes and of different types, into new pedestrian areas. This work puts light on the definition, location, timeline, proportion, presence and origin, providing results for each of these concepts. At the same time, quantitative information is obtained by measuring the footprint, getting data and percentages on the size of the city, the pedestrian areas and the green areas, the historic quarters and the pedestrian zones, the linear metres of such historic quarters and pedestrian streets. The footprint also provides ratios and rates that are considered as essential in order to better understand the pedestrian elements of each city. A classification of cities is established for each of the areas described, highlighting the cities of Pamplona, San Sebastián and Burgos, as they provide the most positive pedestrian figures and lead most of the classification tables or rankings. According to the criteria considered, the city with the worst values is Alicante, followed by Almería, Palma de Mallorca and Las Palmas de Gran Canaria. In the final chapter in the thesis, the cities of Burgos, San Sebastián and Pamplona are chosen as representative study cases. The aim is to gain more accurate knowledge regarding the pedestrianisation origin, timeline and processes. Each city comprises a chronological sequence made of stages, each of which is thoroughly developed and usually announced as zoning plans or urban development projects, accompanied by the plans of the pedestrian actions. At the end of each stage, data with the figures of the pedestrianisation projects are provided, including a numerical chart with locations, pedestrian area, redeveloped urban areas, pedestrian length and pedestrianisation degree in the historic quarter, as well as the data cumulated throughout each stage. In the crossed conclusions on the three cities, the trend of gradually pedestrianising the historic quarters (even reaching the 100% of the pedestrian streets as in San Sebastián) is verified. However, it is difficult to confirm whether the purpose is to reach an overall pedestrianisation of the historic quarters, since there are many variables that affect and influence each city's pedestrianisation process. In addition, the spread of the pedestrian culture from the internal areas to the external areas, beyond the historic quarters to the nearby expansion areas, is compared. Regarding the origin of pedestrianisations, the thesis comes to the conclusion that there is no initial or theoretical conception from which each city's pedestrian plot is developed. The pedestrian processes implemented are varied and diverse but no fact can be specified as the main cause. Based on the moment and circumstances, the pedestrianisation processes are due to different initiatives promoted by shopkeepers, by the local administrations or by the zoning officers, with their expert contributions to the plans. These three players promote and drive individual pedestrianisation projects that overlap in the course of time. Finally, new lines of research are put forwards, as they can be taken as an additional study and as a supplement to this research, dealing with aspects as significant as the economic, social and mobility factors, closely linked to the pedestrianisation processes, as proven in the literature consulted.

La silla de la discordia : la pequeña escala como campo de experimentación en la modernidad : Breuer, Mies y Stam

El siglo XIX fue un siglo dedicado a los grandes edificios públicos. Los teatros, las academias, los museos. Sin embargo la arquitectura durante el siglo XX se dedicará al estudio de la casa. Todos los usos y tipologías se verán fuertemente revisados pero el núcleo de todos los esfuerzos y verdadero inicio de la arquitectura moderna será la vivienda. A partir de ella todos los preceptos modernos se irán aplicando a los distintos programas. Nikolaus Pevsner señala a William Morris como el primer arquitecto moderno porque precisamente entendió que un arte verdaderamente social, en consonancia con su tiempo y la sociedad a la que sirve, ha de ocuparse de aquello que preocupe a la gente. Con la nueva situación de la vivienda en el centro de las motivaciones disciplinares el mueble adopta un nuevo protagonismo. En un momento avanzado de su carrera Marcel Breuer observa entre curioso e irónico cómo el mueble moderno había sido promocionado paradójicamente no por los diseñadores de muebles sino por los arquitectos1. La respuesta la da Le Corbusier en una de sus conferencias de 1931 recogida en Precisiones 2 cuando señala la reformulación del mobiliario como el "nudo gordiano" de cuya resolución pendía la renovación de la planta moderna. El Movimiento Moderno se había visto obligado a atacar este tema para poder avanzar en sus propuestas domésticas. El Movimiento Moderno se propuso solucionar los problemas de la vivienda y de una Europa en reconstrucción pero se exigía además ser capaz de aportar una visión propositiva de la vida moderna. No se trataba únicamente de resolver los problemas ya existentes sino que además había la necesidad autoimpuesta de anticipar la domesticidad del futuro. Para ello sus viviendas al completo, mueble e inmueble, debían de presentarse bajo esa nueva imagen. El manifiesto fundacional de la Deustcher Werkbund extendía el radio de acción del nuevo arquitecto desde la construcción de las ciudades a los cojines del sofá. Este mobiliario tenía la compleja misión de condensar sintéticamente todos esos ideales que la modernidad había traído consigo: abstracción, higiene, fascinación maquínica, confianza positivista en la ciencia o la expresión material optimizada. Objetos de la vida moderna, en palabras de Le Corbusier, susceptibles de suscitar un estado de vida moderno. Pocas sillas en la historia del diseño habrán acarreado tanta polémica y tanta disputa por su autoría como la sillas voladas de tubo de acero en sus diferentes versiones. Para entenderlo situémonos en el año 1927 a las puertas de la exposición "Die Wohnung" ("La vivienda") organizada por los maestros de la Bauhaus y dirigida por Mies van der Rohe en la ladera Weissenhof de Stuttgart. Muchos nombres célebres de la arquitectura mostraron en esa ocasión su personal propuesta para la vivienda moderna y los objetos que la habitan. Entre ellos los muebles con tubo de acero fueron una presencia constante en la exposición pero hubo una pieza que destacó sobre todas las demás por su novedad y audacia. La pieza en cuestión era el modelo de silla volada, esto es, sin apoyos posteriores y cuya rigidez estaba conferida al esfuerzo solidario de la estructura continua de tubo de acero y que terminaría por convertirse en el cruce de caminos de tres figuras de la disciplina arquitectónica: Marcel Breuer, Mies van der Rohe y Mart Stam. Cada uno de ellos desarrolló su propio modelo de silla volada en sus versiones MR por parte de Mies, L&C Arnold de Stam y el posterior modelo BR 33 de Marcel Breuer. Los tres, en algún momento de su vida reclamaron de uno u otro modo su autoría como objetos que les pertenecían intelectualmente. Estas sillas se convirtieron en la expresión máxima de uno de los ansiados anhelos de la modernidad, la propia materialidad del acero, en su versión optimizada, era la que había derivado en una forma completamente nueva de un objeto cotidiano y cuyo tipo estaba ya totalmente asumido. Los nuevos materiales y las nuevas formas de hacer habían irrumpido hasta en los utensilios domésticos, y habían sido capaces de reformularlos. El punto de partida para esta investigación es precisamente esa coincidencia de tres figuras de la arquitectura moderna, los tres de formación artesanal, en un mismo modelo de silla y en una misma fecha. Tres arquitectos que se habían encargado de asegurar que el movimiento moderno no reconocía problemas formales sino solamente de construcción, iban a coincidir en el mismo tiempo y lugar, precisamente en una misma forma, como si tal coincidencia hubiera sido producto de una voluntad de época. Sin embargo el interés de este estudio no radica en una indagación sobre la autoría sino sobre cómo un mismo objeto resulta ser propositivo e interesante en campos muy diversos y la forma en que cada uno lo hace suyo incorporándolo a su propia investigación proyectual. La silla, más allá de ser un objeto de diseño exclusivamente, trasciende su propia escala para situarse inmersa en un proceso de búsqueda y exploración a nivel conceptual, formal, constructivo y estructural en la arquitectura cada uno de ellos. En un momento en que el oficio del arquitecto está siendo intensamente redefinido considero especialmente pertinente esta investigación, que en definitiva versa sobre la forma distintiva en que el pensamiento arquitectónico es capaz de proyectarse sobre cualquier disciplina para reformularla. ABSTRACT The nineteenth century was a century dedicated to the great public buildings; theaters, schools or museums. However the architecture in the twentieth century was devoted to the study of housing. All uses and typologies were heavily revised but the focus of all efforts and true beginning of modern architecture was housing. From these beginnings all modern precepts were applied to the various programs. Nikolaus Pevsner points to William Morris as the first modern architect precisely because he understood that a truly social art in line with its time and the society it serves must deal with social concerns at that time. With the new housing situation at the center of disciplinary concerns furniture took on a new prominence. At an advanced stage of his career Marcel Breuer observed partly with curiosity, partly with irony how modern furniture had been promoted not by furniture designers but by architects. The answer is given by Le Corbusier in one of his lectures of 1931 collected in Precisions when he pointed the reformulation of furniture as the "Gordian knot" for the renewal of modern plan resolution. Modernism had been forced to confront this issue in order to advance their domestic approaches. Modernism not only put forward a solution to the problems of housing and a Europe under reconstruction but is also needed to be able to contribute to an exciting vision of modern life. Not only did solve existing problems but also it had the self-imposed necessity of anticipating future domesticity and to do their houses full, movable and immovable, they should be submitted under this new image. The founding manifesto of the Deutsche Werkbund extended the scope of the new architect from building cities to the couch cushions. This furniture had the complex mission of synthetically condensing all the ideals of modernity had brought with it: abstraction, hygiene, mechanization, positivist confidence in science or material expression. Objects of modern life, in words of Le Corbusier, were likely to give rise a state of modern life. Few chairs in design history have resulted in so much controversy and so much dispute over their invention as the various versions of cantilevered tubular steel chairs. To understand this let us place ourselves in 1927 at the gates of the exhibition "Die Wohnung" ("Housing") organized by the teachers of the Bauhaus and directed by Mies van der Rohe in Stuttgart Weissenhoflung. Many famous names in architecture at that time showed their personal proposals for modern housing and the objects that inhabit them. Amongst these objects, the steel tube furniture was a constant presence at the exhibition but there was a piece so audacious that it stood out from all the others. This piece in question was the cantilever model chair, that is, which had no further rear support and whose rigidity was attributed to the solidity of its continues structure of steel tube. This piece would eventually become the crossroads of three very different personalities: Mart Stam, Marcel Breuer and Mies van der Rohe. Each of them developed their own model of cantilevered chair in different versions; The MR model developed by Mies van der Rohe, the L&C by Arnold Stam and a later model BR 33 by Marcel Breuer, and the three, at some point in their lives demanded the authorship of its invention as objects that belonged to them intellectually. These chairs epitomized one of the coveted objects of modernity, steel material in its optimized version, was what had led to a completely new form of an everyday object whose this type was fully adopted on board in design. New materials and production methods had burst into world of household objects, and had been able to reformulate their design. The bold design then became a dark object of controversy. The starting point for this doctoral thesis is the concurrent invention of the same model of chair by three different figures of modern architecture. These three architects, who were responsible for ensuring that the modern movement considered construction rather than form as the main design consideration, were working in the same place and at the same point in time. It was almost as if these three architects were shaped by the culture of the time (Zeitgeist). However the focus of this study lies not in an investigation of responsibility of ownership but in the investigation fo how the same object can turn out to be purposeful and interesting in many different fields and the way in which each researcher makes it his own by developing his own project research. 1927, the year of their meeting, was a initiatory year in the career of our players. The chair, beyond being only a design object transcended its own scale and became immersed in a process of research and development on a conceptual, formal, structural and constructive level in the architectural approach of each of the architects. At a time when the role of the architect is being redefined intensely I consider this research, which ultimately concerns the distinctive way the architectural thought can be projected onto and reformulate any discipline, to be particularly relevant.

Design of artificial sequence-specific DNA bending ligands.

Proteins that bend DNA are important regulators of biological processes. Sequence-specific DNA bending ligands have been designed that bind two noncontiguous sites in the major groove and induce a bend in the DNA. An oligonucleotide containing pyrimidine segments separated by a central variable linker domain simultaneously binds by triple helix formation two 15-bp purine tracts separated by 10 bp. Bend angles of 61 degrees, 50 degrees, and 38 degrees directed towards the minor groove were quantitated by phasing analysis for linkers of four, five, and six T residues, respectively. The design and synthesis of nonnatural architectural factors may provide a new class of reagents for use in biology and human medicine.

Nuclear Architecture: Perceptions of Architectural Technology

In this paper we explore the implications of pluralist curricula for architectural technology. This includes the potential effects on strengthening the identity of the architectural technology profession and the academic development of the discipline. This latter relies, arguably, on research being explicit in CIAT’s eight mandatory threshold standards. This work concentrates on one of the Chartered Institute of Architectural Technologist’s (CIATS’s) key subjects; 'design', defined as detail design for the architectural technologist. In postulating a philosophy of architectural technology epistemology with a focus on detail design, the pedagogy of architectural detailing in practice and academia is investigated: the associated roles of creativity and conditioning are explored. The interrelationship between conceptual design and construction processes in practice is outlined, identifying the role of the detail design specialist (architectural technologist) in the management of design and production information. Thus is identified the future architectural technologists’ specialisation of nuclear architecture: the total quality construction created by quality of thinking which permeates from and to detail design for assembly/disassembly and production within a collaboratively mechanised AEC team. A theory of nuclear architecture and an associated approach to detail design pedagogy are postulated, aiming to promote a revised perception of the definition of design for the architectural technologist. How this theory can be applied to the creation of a paradigmatic student project, themed on designing for disassembly as a key future focus of ‘Healthy Building’ design is introduced for future exploration. This future research into detail design, the authors propose, should be predicated on the appropriate methodology related to the epistemology of a design-based area of the architectural technology discipline. The roles of Professional, Statutory and Regulatory Bodies (PSRB) in the evaluation and subsequent dissemination of this detail design pedagogy, with the aim of strengthening the architectural technology discipline are emphasised.

The Virtual Interactive Relationship Between BIM Project Teams: Effective Communication to aid Collaboration in the Design Process

Building Information Modelling (BIM) provides a shared source of information about a built asset, which creates a collaborative virtual environment for project teams. Literature suggests that to collaborate efficiently, the relationship between the project team is based on sympathy, obligation, trust and rapport. Communication increases in importance when working collaboratively but effective communication can only be achieved when the stakeholders are willing to act, react, listen and share information. Case study research and interviews with Architecture, Engineering and Construction (AEC) industry experts suggest that synchronous face-to-face communication is project teams’ preferred method, allowing teams to socialise and build rapport, accelerating the creation of trust between the stakeholders. However, virtual unified communication platforms are a close second-preferred option for communication between the teams. Effective methods for virtual communication in professional practice, such as virtual collaboration environments (CVE), that build trust and achieve similar spontaneous responses as face-to-face communication, are necessary to face the global challenges and can be achieved with the right people, processes and technology. This research paper investigates current industry methods for virtual communication within BIM projects and explores the suitability of avatar interaction in a collaborative virtual environment as an alternative to face-to-face communication to enhance collaboration between design teams’ professional practice on a project. Hence, this paper presents comparisons between the effectiveness of these communication methods within construction design teams with results of further experiments conducted to test recommendations for more efficient methods for virtual communication to add value in the workplace between design teams.

Architectural Technology and the BIM Acronym 3: Getting to Grips with BIM

Among Small and Medium Sized Enterprises (SMEs) in particular, the UK Government’s ambitions regarding BIM uptake and diffusion across the construction sector may be tempered by a realpolitik shaped in part by interactions between the industry, Higher Education (HE) and professional practice. That premise also has a global perspective. Building on the previous 2 papers, Architectural technology and the BIM Acronym 1 and 2, this third iteration is a synthesis of research and investigations carried out over a number of years directly related to the practical implementation of BIM and its impact upon BE SMEs. First challenges, risks and potential benefits for SMEs and micros in facing up to the necessity to engage with digital tools in a competitive and volatile marketplace are discussed including tailoring BIM to suit business models, and filtering out achievable BIM outcomes from generic and bespoke aspects of practice. Second the focus is on setting up and managing teams engaging with BIM scenarios, including the role of clients; addresses a range of paradigms including lonely BIM and collaborative working. The significance of taking a whole life view with BIM is investigated including embedding soft landings principles into project planning and realisation. Thirdly procedures for setting up and managing common data environments are identified and the value of achieving smooth information flow is addressed. The overall objective of this paper is to provide SMEs with a practical strategy to develop a toolkit to BIM implementation.

The Influence of Space Layout, Technology and Teaching Approach on Student Learning: An Architectural Technology Perspective

Some would argue that there is a need for the traditional lecture format to be rethought in favour of a more active approach. However, this must form part of a bipartite strategy, considered in conjunction with the layout of any new space to facilitate alternative learning and teaching methods. With this in mind, this paper begins to examine the impact of the learning environment on the student learning experience, specifically focusing on students studying on the Architectural Technology and Management programme at Ulster University. The aim of this study is two-fold: to increase understanding of the impact of learning space layout, by taking a student centered approach; and to gain an appreciation of how technology can impact upon the learning space. The study forms part of a wider project being undertaken at Ulster University known as the Learning Landscape Transition Project, exploring the relationship between learning, teaching and space layout. Data collection was both qualitative and quantitative, with use of a case study supported by a questionnaire based on attitudinal scaling. A focus group was also used to further analyse the key trends resulting from the questionnaire. The initial results suggest that the learning environment, and the technology within it, can not only play an important part in the overall learning experience of the student, but also assist with preparation for the working environment to be experienced in professional life.

On the Evaluation of a DSL for Architectural Consistency Checking

Software architecture erodes over time and needs to be constantly monitored to be kept consistent with its original intended design. Consistency is rarely monitored using automated techniques. The cost associated to such an activity is typically not considered proportional to its benefits. To improve this situation, we propose Dicto, a uniform DSL for specifying architectural invariants. This language is designed to reduce the cost of consistency checking by offering a framework in which existing validation tools can be matched to newly-defined language constructs. In this paper we discuss how such a DSL can be qualitatively and qualitatively evaluated in practice.

The country gentleman's architect : in a great variety of new designs, for cottages, farm-houses, country-houses, villas, lodges for park or garden entrances, and ornamental wooden gates, with plans of the offices belonging to each design, distributed with a strict attention to convenience, elegance and economy /

Mode of access: Internet.

Radford's cyclopedia of cement construction; a general reference work on up-to-date practice in the manufacture and testing of cements; the selection of concreting materials, tools, and machinery; the proportioning, mixing, and depositing of concrete, and its application to all types and reinforced; together with analysis of the principles of constructive design, cost estimating, and the allied branches of stone and brick masonry and steel construction; based on the practical experience of a large staff of experts in actual construction work ...

"Prepared under the supervision of William A. Radford, editor-in-chief ... Alfred Sidney Johnson ... editor in charge."

Catalogue of the thirteenth annual exhibition.

Mode of access: Internet.

An encyclopædia of cottage, farm, and villa architecture and furniture : containing numerous designs for dwellings from the cottage to the villa including farm houses, farmeries, and other agricultural buildings, several designs for country inns, public houses, and parochial schools, with the requisite fittings-up fixtures and furniture ; and appropriate offices, gardens and garden scenery ; each design accompanied by analytical and critical marks illustrative of the principles of archtiectural science and taste on whihc it is composed /

Includes index.

Access to the environment : a series of reference documents on the design and development of site facilities to make them barrier free to the physically handicapped and disabled /

Prepared under contract (H-2002-R) with the Office of Policy Development and Research, Dept. of Housing and Urban Development, and Architectural and Transportation Barriers Compliance Board.