Stressful life events and occupational accidents

Objective: The purpose of this study was to examine the association between stressful life events and occupational accidents. Methods: This was a population-based case-control study, carried out in the city of Botucatu, in southeast Brazil. The cases consisted of 108 workers who had recently experienced occupational accidents. Each case was matched with three controls. The cases and controls answered a questionnaire about recent exposure to stressful life events. Results: Reporting of environmental problems, being a victim of assault, not having enough food at home and nonoccupational fatigue were found to be risk factors for work-related accidents with estimated incidence rate ratios of 1.4 [95% confidence interval (95% CI) 1.1-1.7], 1.3 (95% CI 1.1 1-1.7), 1.3 (95% CI 1.1-1.6), and 1.4 (95% CI 1.2-1.7) respectively. Conclusions: The findings of the study suggested that nonwork variables contribute to occupational accidents, thus broadening the understanding of these phenomena, which can support new approaches to the prevention of occupational accidents.

Africanized honeybees: Biological characteristics, urban nesting behavior and accidents caused in Brazilian cities (Hymenoptera: Apidae)

In 1956 African honeybee queens (Apis mellifera scutellata) were imported from South Africa and Tanzania to Brazil, as part of a government project to increase Brazilian honey production. The European honeybees existing in that country had not adapted well to the tropical conditions and consequently, had a low productivity. The newly introduced bee was known to produce substantially more honey than the other subspecies, but was also famous for its great aggressiveness and quicker attack of intruders with less disturbance. Hoping to create a new hybrid bee that would be both docile and productive, the scientist Warwick Estevam Kerr tried to cross the African and the European subspecies under controlled conditions. However, an accident resulted in the escape of 26 swarms into the Brazilian countryside, where their queens mated with drones of the European resident honeybees. The poly-hybrid bees resulting from these crossings expressed scutellata-like reproductive, foraging, and defensive behaviors and, for this reason, were called Africanized honeybees. They spread rapidly from the introduction area of the African honeybees (near Rio Claro, São Paulo state) to as far south as mid-Argentina and to the north of Texas, also settling in Arizona, New Mexico, California and Nevada, due to their high adaptability to variable ecological conditions. In spite of a few undesirable behaviors, these bees have been invoking larger economic interest because they produce much more honey, have good resistance to diseases and are excellent pollinators. In Brazil, because people frequently disturb the environment, the occupation of urban refuges by Africanized honeybees has been increasing in the last years. The concern with accidents is generally associated with the high swarming frequency recorded during the year and the variety of shelters available in urban areas. This paper deals with the biological characteristics of the Africanized honeybees, their nesting behavior in urban environments, and accidents caused by these bees in Brazilian cities.

A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures

Weight reduction and improved damage tolerance characteristics were the prime drivers to develop new family of materials for the aerospace/ aeronautical industry. Aiming this objective, a new lightweight Fiber/ Metal Laminate (FML) has been developed. The combination of metal and polymer composite laminates can create a synergistic effect on many properties. The mechanical properties of FML shows improvements over the properties of both aluminum alloys and composite materials individually. Due to their excellent properties, FML are being used as fuselage skin structures of the next generation commercial aircrafts. One of the advantages of FML when compared with conventional carbon fiber/epoxy composites is the low moisture absorption. The moisture absorption in FML composites is slower when compared with polymer composites, even under the relatively harsh conditions, due to the barrier of the aluminum outer layers. Due to this favorable atmosphere, recently big companies such as EMBRAER, Aerospatiale, Boing, Airbus, and so one, starting to work with this kind of materials as an alternative to save money and to guarantee the security of their aircrafts.

Attributable fraction of work accidents related to occupational noise exposure in a Southeastern city of Brazil

Noise is the most frequent type of occupational exposure and can lead to both auditory and extra-auditory dysfunction as well as increasing the risk of work accidents. The purpose of this study was to estimate the attributable fraction of work accidents related to occupational noise exposure in a medium-sized city in Southeast Brazil. In this hospital-based case-control study, including 600 cases and 822 controls, the odds ratio of work accidents (controlled for several covariables) was obtained classifying occupational noise exposure into four levels and determining the prevalence at each level. Based on these data, the calculated attributable fraction was 0.3041 (95%CI: 0.2341-0.3676), i.e., 30% of work accidents in the study area were statistically associated with occupational noise exposure. The authors discuss the causes of this association and the implications for the prevention of work accidents.

An investigation into the loss of the Brazilian space programme's launch vehicle VLS-1 V03

There has been a rapid increase in the complexity and integration of many safety-critical systems. In consequence, it is becoming increasingly difficult to identify the causes of incidents and accidents back through the complex interactions that lead to an adverse event. At the same time, there is a growing appreciation of the need to consider a broad range of contextual factors in the aftermath of any mishap. A number of regulators, operators and research teams have responded to these developments by proposing novel techniques to support the analysis of complex, safety-critical incidents. It is important to illustrate these different approaches by applying them to a number of common case studies. The following pages, therefore, show how STAMP and AcciMap might support the Serviço Público Federal investigation into the explosion and fire of the Brazilian launch vehicle VLS-1 VO3. © 2006 Elsevier Ltd. All rights reserved.

Development of a model to measure the efficiency of outsourced companies in the process of aircraft spare parts technical publications

This paper presents a proposal of a model to measure the efficiency of outsourced companies in the aeronautical industry applying the methods DEA and AHP. It also proposes an evaluation in the relation between the variables of the process and the value obtained for the effiiency. The criteria of Quality, Time and Cost were considered the outputs of the process, and those criteria were quantified by AHP for DEA matrix.The number of technical documents received by those outsorced companies were considered the input of the process. The other purpose is to separate the companies in groups considered able to receive an investment to improve their process. Copyright © 2008 SAE International.

The need to establish coordinated measures for the reduction of road accidents in Latin America and the Caribbean

This edition of the FAL Bulletin approaches road safety and the need for urgent, coordinated measures to be established between the public and private sectors and civil society in order to prevent the rapid increase in deaths and casualties in road accidents in Latin America and the Caribbean, an issue which is threatening the sustainability of regional development.

An analysis of traffic accidents and children: the case of Uruguay

This issue of the FAL Bulletin deals with road safe ty and its impact on children by examining data collected on road safe ty in the Eastern Republic of Uruguay by the Gonzalo Rodríguez Foundation wi thin the framework of its EDU-CAR Road Safety Plan for Children.

Monitoramento e avaliação da condição de um sistema propulsor aeronaútico através de técnicas de análise de partículas em óleos lubrificantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al-Li alloys used in aircraft fabrication

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Monitoramento e identificação de falhas em estruturas aeronáuticas e mecânicas utilizando técnicas de computação inteligente

Pós-graduação em Engenharia Mecânica - FEIS

Characterization of the nonlinear behavior of a F-16 aircraft using discrete-time Volterra series

The linearity assumption in the structural dynamics analysis is a severe practical limitation. Further, in the investigation of mechanisms presented in fighter aircrafts, as for instance aeroelastic nonlinearity, friction or gaps in wing-load-payload mounting interfaces, is mandatory to use a nonlinear analysis technique. Among different approaches that can be used to this matter, the Volterra theory is an interesting strategy, since it is a generalization of the linear convolution. It represents the response of a nonlinear system as a sum of linear and nonlinear components. Thus, this paper aims to use the discrete-time version of Volterra series expanded with Kautz filters to characterize the nonlinear dynamics of a F-16 aircraft. To illustrate the approach, it is identified and characterized a non-parametric model using the data obtained during a ground vibration test performed in a F-16 wing-to-payload mounting interfaces. Several amplitude inputs applied in two shakers are used to show softening nonlinearities presented in the acceleration data. The results obtained in the analysis have shown the capability of the Volterra series to give some insight about the nonlinear dynamics of the F-16 mounting interfaces. The biggest advantage of this approach is to separate the linear and nonlinear contributions through the multiple convolutions through the Volterra kernels.

Aircraft selection with DEA's triple index: an approach for sustainability

The objective of this paper is to present a benefit-cost ranking of 127 civil transport aircraft; this ranking was determined considering a new data envelopment analysis (DEA) approach, called triple index, which combines three assessment methods: 1) standard frontier, 2) inverted index; 3) cross-multiplicative index. The analysis used the following inputs: a) market price; b) direct operating costs; and as outputs: a) payload, b) cruise speed; c) maximum rate of climb with a single engine. To ensure the homogeneity of the units, the aircrafts were divided according to the propulsion system (jet and turboprop) and size (regional, narrow-body and wide-body); they were also evaluated according to different ranges in order to identify the aircraft with the best cost-benefit relationship for each option.

Thermal Imagery Applied to Reducing Bird Hazards to Aircraft at Airports

Airports worldwide are at a disadvantage when it comes to being able to spot birds and warn aircrews about the location of flocks either on the ground or close to the airfield. Birds simply cannot be easily seen during the day and are nearly invisible targets for planes at night or during low visibility. Thermal imaging (infrared) devices can be used to allow ground and tower personnel to pinpoint bird locations day or night, thus giving the airport operators the ability to launch countermeasures or simply warn the aircrews. This technology is available now, though it has been predominately isolated to medical and military system modifications. The cost of these devices has dropped significantly in recent years as technology, capability, and availability have continued to increase. Davison Army Airfield (DAAF), which is located about 20 miles south of Ronald Reagan National Airport in Washington, DC, is the transient home to many bird species including an abundance of ducks, seagulls, pigeons, and migrating Canadian geese. Over the past few years, DAAF implemented a variety of measures in an attempt to control the bird hazards on the airfield. Unfortunately, when it came to controlling these birds on or near our runways and aircraft movement areas we were more reactive than proactive. We would do airfield checks several times an hour to detect and deter any birds in these areas. The deterrents used included vehicle/human presence, pyrotechnics, and the periodic use of a trained border collie. At the time, we felt like we were doing all we could to reduce the threat to aircraft and human life. It was not until a near fatal accident in October 1998, when we truly realized how dangerous our operating environment really was to aircraft at or near the airfield. It was at this time, we had a C-12 (twin-engine passenger plane) land on our primary runway at night. The tower cleared the aircraft to land, and upon touchdown to the runway the aircraft collided with a flock of geese. Neither the tower nor the crew of the aircraft saw the geese because they were obscured in the darkness. The end result was 12 dead geese and $374,000 damage to the C-12. Fortunately, there were no human fatalities, but it was painfully clear we needed to improve our method of clearing the runway at night and during low visibility conditions. It was through this realization that we ventured to the U.S. Army Communications and Electronics Command for ideas on ways to deal with our threat. It was through a sub-organization within this command, Night Vision Labs, that we realized the possibilities of modifying thermal imagery and infrared technology to detecting wildlife on airports.

BIRD HAZARDS TO AIRCRAFT

When I spoke to the third Bird Control Seminar in 1966 on "Ecological Control of Bird Hazards to Aircraft", I reviewed what we had accomplished up to that time. I spoke about the extent of the problem, the bird species involved and the methods we used to make the airports less attractive to birds that created hazards to aircraft. I wish to discuss today our accomplishments since 1966. I have presented a number of papers on the topic including one with Dr. W. W. H. Gunn, in 1967 at a meeting in the United Kingdom, and others in the United States (1968 and 1970) and at the World Conference on Bird Hazards to Aircraft in Canada in 1969. There is no longer any question about the consequences of collision between birds and aircraft. Aircraft have not become less vulnerable either. Engines on the Boeing 747 have been changed as a result of damage caused by ingested birds. Figures crossing my desk daily show that while we are reducing the number of serious incidents and cutting down repair costs, we will continue to have bird strikes. Modification of the airport environment (Solman, 1966) has gone on continuously since 1963. The Department of Transport of Canada has spent more than 10 million dollars modifying major Canadian airports to reduce their attractiveness to birds. Modifications are still going on and will continue until bird attraction has been reduced to a minimum.