Diagnosis of an EPS module

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e Computadores

Topics regarding access to european information institutions: European Union so close and yet so far

From the 1990s, the Parliament, the Council and the European Commission adopted a new approach to disclosure of their working papers. Legal instruments to regulate and allow a fairly broad access to internal working documents of these institutions were created. European institutions also exploited the potential of Information and Communication Technologies, developing new instruments to register the documents produced and make them accessible to the public. The commitment to transparency sought to shows a more credible European government, and reduces the democratic deficit. However, the data analysis regarding access to EU institutions documents shows that general public is still far from direct contact with European bodies.

Cochineal, a precious source of red: cochineal dyes characterization by high performance liquid chromatography with diode array detection and principal component analysis

Presented at Faculdade de Ciências e Tecnologias, Universidade de Lisboa, to obtain the Master Degree in Conservation and Restoration of Textiles

Risk Acceptance in the Furniture Sector: Analysis of Acceptance Level and Relevant Influence Factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

The Digital Textbook: Methodological and Didactic Challenges for Primary School

The potentialities of ICT in education bring about changes in the teaching and learning methodologies, in the places where you learn and in the way you learn. This demands a reflection not only on the ways of learning, but also on the support resources, so that learning can take place and, of course, it is indispensable to understand the teachers’ answer to the digital challenges. Thus, the purpose of this analysis is to reflect about technological trends in an educational context and their underlying models by analyzing the role played by digital textbooks in Portugal in an innovating context. This way, we intend to contribute to an educational policy as we plan to relate the teachers’ training to the increasing development of the digital textbooks and we also intend to contribute to the understanding of a didactic resource which is closely related to the learning processes which resort to advanced technology.

Industrie 4.0 Framework, Challenges and Perspectives

The world is increasingly in a global community. The rapid technological development of communication and information technologies allows the transmission of knowledge in real-time. In this context, it is imperative that the most developed countries are able to develop their own strategies to stimulate the industrial sector to keep up-to-date and being competitive in a dynamic and volatile global market so as to maintain its competitive capacities and by consequence, permits the maintenance of a pacific social state to meet the human and social needs of the nation. The path traced of competitiveness through technological differentiation in industrialization allows a wider and innovative field of research. Already we are facing a new phase of organization and industrial technology that begins to change the way we relate with the industry, society and the human interaction in the world of work in current standards. This Thesis, develop an analysis of Industrie 4.0 Framework, Challenges and Perspectives. Also, an analysis of German reality in facing to approach the future challenge in this theme, the competition expected to win in future global markets, points of domestic concerns felt in its industrial fabric household face this challenge and proposes recommendations for a more effective implementation of its own strategy. The methods of research consisted of a comprehensive review and strategically analysis of existing global literature on the topic, either directly or indirectly, in parallel with the analysis of questionnaires and data analysis performed by entities representing the industry at national and world global placement. The results found by this multilevel analysis, allowed concluding that this is a theme that is only in the beginning for construction the platform to engage the future Internet of Things in the industrial environment Industrie 4.0. This dissertation allows stimulate the need of achievements of more strategically and operational approach within the society itself as a whole to clarify the existing weaknesses in this area, so that the National Strategy can be implemented with effective approaches and planned actions for a direct training plan in a more efficiently path in education for the theme.

Impact of sensor nodes scaling and velocity on handover mechanisms for healthcare wireless sensor networks with mobility support

Health promotion in hospital environments can be improved using the most recent information and communication technologies. The Internet connectivity to small sensor nodes carried by patients allows remote access to their bio-signals. To promote these features the healthcare wireless sensor networks (HWSN) are used. In these networks mobility support is a key issue in order to keep patients under realtime monitoring even when they move around. To keep sensors connected to the network, they should change their access points of attachment when patients move to a new coverage area along an infirmary. This process, called handover, is responsible for continuous network connectivity to the sensors. This paper presents a detailed performance evaluation study considering three handover mechanisms for healthcare scenarios (Hand4MAC, RSSI-based, and Backbone-based). The study was performed by simulation using several scenarios with different number of sensors and different moving velocities of sensor nodes. The results show that Hand4MAC is the best solution to guarantee almost continuous connectivity to sensor nodes with less energy consumption.

Learning networks and moodle use in online courses: a social network analysis study

Dissertação para obtenção do Grau de Doutor em Ciências da Educação Especialidade em Tecnologias, Redes e Multimédia na Educação e Formação

Web-assisted tobacco intervention in Portuguese : intentions to make behavioural changes and behavioural changes

ABSTRACT - The problem of how to support “intentions to make behavioural changes” (IBC) and “behaviour changes” (BC) in smoking cessation when there is a scarcity of resources is a pressing issue in public health terms. The present research focuses on the use of information and communications technologies and their role in smoking cessation. It is developed in Portugal after the ratification of WHO Framework Convention on Tobacco Control (on 8 November 2005). The prevalence of smokers over fifteen years of age within the population stood at 20.9% (30.9% for men and 11.8% for women). While the strategy of helping people to quit smoking has been emphasised at National Health Service (NHS) level, the uptake of cessation assistance has exceeded the capacity of the service. This induced the search of new theoretical and practical venues to offer alternative options to people willing to stop smoking. Among these, the National Health Plan (NHP) of Portugal (2004-2010), identifies the use of information technologies in smoking cessation. eHealth and the importance of health literacy as a means of empowering people to make behavioural changes is recurrently considered an option worth investigating. The overall objective of this research is to understand, in the Portuguese context, the use of the Internet to help people to stop smoking. Research questions consider factors that may contribute to “intentions to make behavioural changes” (IBC) and “behavioural changes” (BC) while using a Web-Assisted Tobacco Intervention Probe (WATIP). Also consideration is given to the trade-off on the use of the Web as a tool for smoking cessation: can it reach a vast number of people for a small cost (efficiency) demonstrating to work in the domain of smoking cessation (efficacy)”? In addition to the introduction, there is a second chapter in which the use of tobacco is discussed as a public health menace. The health gains achieved by stopping smoking and the means of quitting are also examined, as is the use of the Internet in smoking cessation. Then, several research issues are introduced. These include background theory and the theoretical framework for the Sense of Coherence. The research model is also discussed. A presentation of the methods, materials and of the Web-Assisted Tobacco Intervention Probe (WATIP) follows. In chapter four the results of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) are presented. This study is divided into two sections. The first describes results related to quality control in relation to the Web-Assisted Tobacco Intervention Probe (WATIP) and gives an overview of its users. Of these, 3,150 answered initial eligibility questions. In the end, 1,463 met all eligibility requirements, completed intake, decided on a day to quit smoking (Dday) and declared their “intentions to make behavioural changes” (IBC) while a second targeted group of 650 did not decide on a Dday. With two quit attempts made before joining the platform, most of the participants had experienced past failures while wanting to stop. The smoking rate averaged 21 cigarettes per day. With a mean age of 35, of the participants 55% were males. Among several other considerations, gender and the Sense of Coherence (SOC) influenced the success of participants in their IBC and endeavour to set quit dates. The results of comparing males and females showed that, for current smokers, establishing a Dday was related to gender differences, not favouring males (OR=0.76, p<0.005). Belonging to higher Socio-economic strata (SES) was associated with the intention to consider IBC (when compared to lower SES condition) (OR=1.57, p<0.001) and higher number of school years (OR=0.70, p<0.005) favoured the decision to smoking cessation. Those who demonstrated higher confidence in their likelihood of success in stopping in the shortest time had a higher rate of setting a Dday (OR=0.51, p<0.001). There were differences between groups in IBC reflecting the high and low levels of the SOC score (OR=1.43, p=0.006), as those who considered setting a Dday had higher levels of SOC. After adjusting for all variables, stages of readiness to change and SOC were kept in the model. This is the first Arm of this research where the focus is a discussion of the system’s implications for the participants’ “intentions to make behavioural changes” (IBC). Moreover, a second section of this study (second Arm) offers input collected from 77 in-depth interviews with the Web-Assisted Tobacco Intervention Probe (WATIP) users. Here, “Behaviour Change” (BC) and the usability of the platform are explored a year after IBC was declared. A percentage of 32.9% of self-reported, 12-month quitters in continuous abstinence from smoking from Dday to the 12-month follow- up point of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) has been assessed. Comparing the Sense of Coherence (SOC) scores of participants by their respective means, according to the two groups, there was a significant difference in these scores of non smokers (BC) (M=144,66, SD=22,52) and Sense of Coherence (SOC) of smokers (noBC) (M=131,51, SD=21,43) p=0.014. This WATIP strategy and its contents benefit from the strengthening of the smoker’s sense of coherence (SOC), so that the person’s progress towards a life without tobacco may be experienced as comprehensible, manageable and meaningful. In this sample the sense of coherence (SOC) effect is moderate although it is associated with the day to quit smoking (Dday). Some of the limitations of this research have to do with self-selection bias, sample size (power) and self-reporting (no biochemical validation). The enrolment of participants was therefore not representative of the smoking population. It is not possible to verify the Web-Assisted Tobacco Intervention Probe (WATIP) evaluation of external validity; consequently, the results obtained cannot be applied generalized. No participation bias is provided. Another limitation of this study is the associated limitations of interviews. Interviewees’ perception that fabricating answers could benefit them more than telling the simple truth in response to questions is a risk that is not evaluated (with no external validation like measuring participants’ carbon monoxide levels). What emerges in this analysis is the relevance of the process that leads to the establishment of the quit day (Dday) to stop using tobacco. In addition, technological issues, when tailoring is the focus, are key elements for scrutiny. The high number of dropouts of users of the web platform mandates future research that should concentrate on the matters of the user-centred design of portals. The focus on gains in health through patient-centred care needs more research, so that technology usability be considered within the context of best practices in smoking cessation.

Service-oriented infrastructure to support the control, monitoring and management of a shop floor system

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Bits, Atoms, and Information Sharing: new opportunities for participation

The particular characteristics and affordances of technologies play a significant role in human experience by defining the realm of possibilities available to individuals and societies. Some technological configurations, such as the Internet, facilitate peer-to-peer communication and participatory behaviors. Others, like television broadcasting, tend to encourage centralization of creative processes and unidirectional communication. In other instances still, the affordances of technologies can be further constrained by social practices. That is the case, for example, of radio which, although technically allowing peer-to-peer communication, has effectively been converted into a broadcast medium through the legislation of the airwaves. How technologies acquire particular properties, meanings and uses, and who is involved in those decisions are the broader questions explored here. Although a long line of thought maintains that technologies evolve according to the logic of scientific rationality, recent studies demonstrated that technologies are, in fact, primarily shaped by social forces in specific historical contexts. In this view, adopted here, there is no one best way to design a technological artifact or system; the selection between alternative designs—which determine the affordances of each technology—is made by social actors according to their particular values, assumptions and goals. Thus, the arrangement of technical elements in any technological artifact is configured to conform to the views and interests of those involved in its development. Understanding how technologies assume particular shapes, who is involved in these decisions and how, in turn, they propitiate particular behaviors and modes of organization but not others, requires understanding the contexts in which they are developed. It is argued here that, throughout the last century, two distinct approaches to the development and dissemination of technologies have coexisted. In each of these models, based on fundamentally different ethoi, technologies are developed through different processes and by different participants—and therefore tend to assume different shapes and offer different possibilities. In the first of these approaches, the dominant model in Western societies, technologies are typically developed by firms, manufactured in large factories, and subsequently disseminated to the rest of the population for consumption. In this centralized model, the role of users is limited to selecting from the alternatives presented by professional producers. Thus, according to this approach, the technologies that are now so deeply woven into human experience, are primarily shaped by a relatively small number of producers. In recent years, however, a group of three interconnected interest groups—the makers, hackerspaces, and open source hardware communities—have increasingly challenged this dominant model by enacting an alternative approach in which technologies are both individually transformed and collectively shaped. Through a in-depth analysis of these phenomena, their practices and ethos, it is argued here that the distributed approach practiced by these communities offers a practical path towards a democratization of the technosphere by: 1) demystifying technologies, 2) providing the public with the tools and knowledge necessary to understand and shape technologies, and 3) encouraging citizen participation in the development of technologies.

Involvement and interactions of different immune cells and their cytokines in human visceral leishmaniasis

Visceral leishmaniasis (VL) or kala-azar, a disseminated infection of the lymphoreticular system of the body, is marked by severe defect in immune system of the host. Successful cure of VL depends on the immune status of the host in combination with the effects of the antileishmanial drugs. The rationale approach towards eradication of this disease would be to potentiate the immune functioning of the host in addition to parasite killing. This review deals with different aspects of adaptive and innate immune responses and explores their role in protection or pathogenesis of VL. IL-10 has emerged as the principal cytokine responsible for disease pathogenesis, although evidences regarding its source during active VL remain inconclusive. On the other hand, IFNγ, under the influence of IL-12, is mostly correlated with healing of the disease. Chemokines are important in mounting cell-mediated immune response as they can prevent parasite invasion in association with cytokines. Different types of T cells like CD4, CD8 and NK T cells also contribute to the immunology of this disease. In spite of conflicting reports, the role of regulatory T cells in VL pathogenesis is important. Recently discovered Th17 subset and its different members have been reported to perform diverse functions in the course of VL and leishmaniasis as a whole. Innate immune responses, depending on the cell types, are essential in early parasite detection and subsequent development of an efficient NK cell response. Immunotherapy targeting IL-10 could be looked upon as an interesting option for the treatment of VL.

Risk acceptance in the furniture sector: Analysis of acceptance level and relevant influence factors

Risk acceptance has been broadly discussed in relation to hazardous risk activities and/or technologies. A better understanding of risk acceptance in occupational settings is also important; however, studies on this topic are scarce. It seems important to understand the level of risk that stakeholders consider sufficiently low, how stakeholders form their opinion about risk, and why they adopt a certain attitude toward risk. Accordingly, the aim of this study is to examine risk acceptance in regard to occupational accidents in furniture industries. The safety climate analysis was conducted through the application of the Safety Climate in Wood Industries questionnaire. Judgments about risk acceptance, trust, risk perception, benefit perception, emotions, and moral values were measured. Several models were tested to explain occupational risk acceptance. The results showed that the level of risk acceptance decreased as the risk level increased. High-risk and death scenarios were assessed as unacceptable. Risk perception, emotions, and trust had an important influence on risk acceptance. Safety climate was correlated with risk acceptance and other variables that influence risk acceptance. These results are important for the risk assessment process in terms of defining risk acceptance criteria and strategies to reduce risks.

Earthwork optimization system for sustainable highway construction

In highway construction, earthworks refer to the tasks of excavation, transportation, spreading and compaction of geomaterial (e.g. soil, rockfill and soil-rockfill mixture). Whereas relying heavily on machinery and repetitive processes, these tasks are highly susceptible to optimization. In this context Artificial Intelligent techniques, such as Data Mining and modern optimization can be applied for earthworks. A survey of these applications shows that they focus on the optimization of specific objectives and/or construction phases being possible to identify the capabilities and limitations of the analyzed techniques. Thus, according to the pinpointed drawbacks of these techniques, this paper describes a novel intelligent earthwork optimization system, capable of integrating DM, modern optimization and GIS technologies in order to optimize the earthwork processes throughout all phases of design and construction work. This integration system allows significant savings in time, cost and gas emissions contributing for a more sustainable construction.

Development of an intelligent bio-based packaging system

[Extrat] Currently there is a growing interest in the development of eco-efficient bio-based packaging, being active, smart and intelligent packaging the most highlighted among various innovations. Intelligent packaging has the ability to detect and mark, in real time, changes that might occur within the package/in the food product. Their main purpose is to help the consumer decide whether to buy a certain food product, ensuring that when it is bought it has not suffered significant changes influencing its quality and safety. (...)