970 resultados para Abyssogena novacula, height of valve


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The features of paca epididymis, based on its appearance in light microscope, is described in this paper. The cellular population of the epithelial lining comprises principal cells, basal cells, apical cells, narrows cells, and hallo cells. The epididymis is divided in five distinct and continuous regions, Zone I, or initial segment, and zone II, are both localized into the head. Zone III comprises the distal head and all the body. Zones IV and V are restricted to the tail, in the proximal and distal cauda epididymis respectively. Each zone can be readily distinguished on the basis of morphological characteristics. The height of epididymal epithelium is greater in zone I. There is a progressive increase in the diameter of the tubular lumen through the different areas, with the maximum in the zone V. The presence of a high epithelium, and the virtual absence of sperm in zone I suggest fast transit of spermatozoa in this region. Zone V comprises the distal tail, has smaller epithelial lining, greater luminal diameter, shorter stereocilia than the other zones, and contains spermatozoa packed inside the lumen, that characterizes this zone as a place of sperm storage. The findings are compared with other reports in rodents and other domestic animals, to contribute to the understanding of epididymal morphophysiology. © 2013 Firenze University Press.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Fractures of the severely atrophic (<10 mm) edentulous mandible are not common, and these fractures with a vertical height of 10 mm or less have long been recognized as being particularly problematic. Although there are advances in the treatment of the atrophic mandibular fracture, the treatment remains controversial. There are some options for treatment planning because of using small miniplates to large reconstruction plates. However, when the fixation method fails, it causes malunion, nonunion, and/or infection, and sometimes it has been associated with large bone defects. The authors describe a clinical report of a failed miniplate fixation for atrophic mandibular fracture management. The authors used a load-bearing reconstruction plate combined with autogenous bone graft from iliac crest for this retreatment. The authors show a follow-up of 6 months, with union of the fracture line and no complication postoperatively. © 2013 by Mutaz B. Habal, MD.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Introduction: The retroarticular process is a bony prominence formed by the thickening of the lateral border of the mandibular fossa, forming the posterior wall of the temporomandibular joint. Since little is known and discussed about the retroarticular process, our aim was to study its presence, shape and size, relating these findings to the shape of the skulls according to the horizontal cephalic index. Materials and Methods: We used 400 dry human skulls of the Institute of Science and Technology - UNESP Anatomy Laboratory. Each skull was classified in brachycranics, mesocranics or dolichocranics, and then positioned on a craneostat to measure the height of the retroarticular process from its lower extremity to the auriculo-orbital plane. The width was obtained by measuring the base of the process on its longer lateral axis. Results: The retroarticular process was found bilaterally in 397 skulls (99.25%). All the processes were classified into the following shapes: pyramidal (35.55%), tubercular (31.78%), mammilar (20.73%), crest-like (9.05%) and molar shape (2.89%); 254 skulls (63.50%) showed the same type of process at the right and left sides (Kappa=0.496, moderate agreement). The average height and width were 5.28 mm and 12.81 mm, respectively. Conclusion: The retroarticular process was found in almost all the skulls examined. There are no significant evidences about the relationship among the presence, shape and size of the retroarticular process and the shape of the skulls according to the horizontal cephalic index. However, our findings led us to infer that there would be a functional relationship between the process and the temporomandibular joint.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This paper proposes a straightforward compromising method to determine the output power of all committed units during the scheduling time horizon. Unlike the conventional methods that work based on a constant pollution control cost (CPCC), this method works based on the system topology such as demand, minimum cost and minimum output emission of the system. In order to have a meaningful compromise between costs and emission in economic and emission dispatch (EED) problem, a flexible pollution control cost (FPCC) is proposed. Also a dynamic economic emission dispatch (DEED) approach is considered where the ramping constraints couple the scheduling hours; the inclusion of valve-point effect makes the DEED modeling more practical. The validity and effectiveness of the unproblematic FPCC approach is verified through an IEEE 30-bus test system with 6 unit for the 6-hour scheduling horizon. © 2013 IEEE.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The number of visceral leishmaniasis (VL) cases has increased over the past 10 years in Brazil, especially in the North and Northeast regions of the country. The aim of this study was to evaluate the urbanisation of VL vectors in Barcarena, Pará, an area in northern Brazil where VL is endemic. Sandflies were captured using Centers for Disease Control (CDC) light traps along an urban-rural gradient. The CDC traps were installed inside hen houses at a height of 150 cm. A total of 5,089 sandflies were collected and 11 species were identified. The predominant species was Lutzomyia longipalpis (rate of 95.15%), which suggests its participation in the transmission of VL. A total of 1,451 Lu. longipalpis females were dissected and no Leishmania infections were detected. Most of the sandflies were captured at the border of a forest (88.25%) and no flies were captured in the urban area, which suggests that transmission is still restricted to rural sites. However, the fact that a specimen was collected in an intermediate area indicates that urbanisation is a real possibility and that vector monitoring is important.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

OBJETIVO: avaliar a diferença na percepção de ortodontistas e leigos quanto à redução da exposição dentogengival no sorriso. MÉTODOS: no total, 60 avaliadores de ambos os sexos (30 leigos e 30 ortodontistas) avaliaram fotografias do sorriso espontâneo de dois indivíduos, um do sexo masculino e um do feminino. A partir das imagens originais, a altura do sorriso foi modificada usando-se um programa de manipulação de imagens. Os examinadores emitiram notas de 0 a 10, conforme o nível de agradabilidade. A reprodutibilidade do método foi examinada através do teste de Wilcoxon, enquanto os testes de Friedman e Wilcoxon (P<0,05) foram utilizados para observar as diferenças intra e interexaminadores, respectivamente. RESULTADOS: os resultados demonstraram não haver diferença entre os grupos de avaliadores com relação à estética quando a altura de ambos os sorrisos foi modificada. Entretanto, o sorriso do indivíduo do sexo masculino teve menor aceitabilidade do que o sorriso feminino. Uma suave redução na exposição dentogengival no sorriso (2mm) não foi percebida por leigos ou ortodontistas (p>0,05). CONCLUSÃO: o sorriso do indivíduo do sexo feminino recebeu notas mais altas do que o do masculino; entretanto, amostras envolvendo um maior número de indivíduos em cada grupo são necessárias para confirmar se a observação estaria relacionada ao sexo do indivíduo examinado.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Piper aduncum L. é uma planta que ocorre na Amazônia Brasileira com elevado teor de óleo essencial e que apresenta propriedades biológicas utilizáveis na agricultura e saúde humana. Com o objetivo de avaliar germoplasma visando ao melhoramento genético e cultivo econômico, realizaram-se coletas (inflorescências, estacas, folhas e ramos finos) em dez municípios da Amazônia Brasileira (Manaus, Marabá, Goianésia, Moju, Belém, Santa Izabel, Americano, Bonito, Santarém Novo e Aveiro). Tomaram-se dados do ambiente, populações e de doze caracteres morfoagronômicos (número de folhas por ramo, comprimento da folha, largura da folha, circunferência do ramo mais velho, altura da planta, número de ramos ortotrópicos, número de ramos plagiotrópicos, comprimento do entrenó, número de espigas por ramo, rendimento de óleo, teor e produção de dilapiol). As inflorescências e estacas foram identificadas e encaminhadas para a UFRA em Belém-PA e, as folhas e ramos finos, para o Museu Paraense Emílio Goeldi-MPEG, para extração do óleo essencial (hidrodestilação). Utilizaram-se estimadores de média, desvio padrão, coeficiente de variação e amplitude total para estudo da variabilidade fenotípica. As matrizes prevalenceram em ambientes antropizados, solos argilosos, condições de drenagem variáveis, terrenos planos e clima Ami, como também predominaram populações definíveis pela agregação dos indivíduos, em terra alta e a pleno sol, serrapilheira, tamanho das populações e presença de plântulas no chão muito variáveis. Os caracteres de maior variabilidade foram número de ramos ortotrópicos, número de espigas por ramo, circunferência do ramo mais velho (morfológicos), teor e produção de dilapiol (agronômicos). Concluiu-se que a espécie apresenta adaptação a diferentes ambientes com relação à vegetação, solo, clima, relevo e drenagem, facilitando o cultivo e domesticação. Há variabilidade morfoagronômica favorecendo a seleção e fitomelhoramento.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

O experimento foi realizado na área experimental do Departamento de Engenharia Rural da Faculdade de Ciências Agronômicas – Unesp/Botucatu, Estado de São Paulo, em duas estufas dispostas em diferentes orientações geográficas, Leste/Oeste e Norte/Sul. A alface (Lactuva sativa L.) cv. Elisa foi cultivada em ambas estufas, sendo semeada em 05/05/99, transplantada em 29/05/99 e colhida em 31/06/99. Utilizou-se tensiômetros para monitorar o potencial de água no solo para realizar o manejo do sistema de irrigação por gotejamento. Microevaporímetros eqüidistantes de 3 m e colocados em 3 alturas, 0.50, 1.00 e 1.50 m, termohigrógrafos e tanques Classe “A” foram instalados nas duas estufas. Através de análise geoestatística, não se observou dependência espacial nem variabilidade espacial da evaporação nas duas estufas. Entretanto, a altura dos evaporímetros apresentou diferenças significativas: a evaporação à altura de 1.50 foi menor que nas outras duas.As médias de temperatura, umidade relativa e déficit de pressão de vapor do arnão diferiram estatisticamente entre as estufas e o ambiente externo. Os valores médios de evaporação de água no tanque Classe A instalado fora das estufas diferiram estatisticamente quando comparados com os instalados no interior das estufas, porém, entre as orientações não se constatou diferença significativa. Pôde-se verificar que não houve diferença significativa das características agronômicas da alface em ambas orientações estudadas. No entanto, houve diferença significativa para essas características entre os canteiros no interior das mesmas, havendo variância espacial para os dados de matéria fresca apenas na estufa N/S.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Efficiency in the use of genetic variability, whether existing or created, increases when properly explored and analysed. Incorporation of biotechnology into breeding programs has been the general practice. The challenge for the researcher is the constant development of new and improved cultivars. The aim of this experiment was to select progenies with superior characteristics, whether or not carriers of the RR gene, derived from bi-parental crosses in the soybean, with the help of multivariate techniques. The experiment was carried out in a family-type experimental design, including controls, during the agricultural year 2010/2011 and 2011/2012 in Jaboticabal in the Brazilian State of São Paulo. From the F3 generation, phenotypically superior plants were selected, which were evaluated for the following traits: number of days to flowering; number of days to maturity; height of first pod insertion; plant height at maturity; lodging; agronomic value; number of branches; number of pods per plant; 100-seed weight; number of seeds per plant; grain yield per plant. Given the results, it appears possible to select superior progeny by principal component analysis. Cluster analysis using the K-means method links progeny according to the most important characteristics in each group and identifies, by the Ward method and by means of a dendrogram, the structure of similarity and divergence between selected progeny. Both methods are effective in aiding progeny selection.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Soil physical quality is an important factor for the sustainability of agricultural systems. Thus, the aim of this study was to evaluate soil physical properties and soil organic carbon in a Typic Acrudox under an integrated crop-livestock-forest system. The experiment was carried out in Mato Grosso do Sul, Brazil. Treatments consisted of seven systems: integrated crop-livestock-forest, with 357 trees ha-1 and pasture height of 30 cm (CLF357-30); integrated crop-livestock-forest with 357 trees ha-1 and pasture height of 45 cm (CLF357-45); integrated crop-livestock-forest with 227 trees ha-1 and pasture height of 30 cm (CLF227-30); integrated crop-livestock-forest with 227 trees ha-1 and pasture height of 45 cm (CLF227-45); integrated crop-livestock with pasture height of 30 cm (CL30); integrated crop-livestock with pasture height of 45 cm (CL45) and native vegetation (NV). Soil properties were evaluated for the depths of 0-10 and 10-20 cm. All grazing treatments increased bulk density (r b) and penetration resistance (PR), and decreased total porosity (¦t) and macroporosity (¦ma), compared to NV. The values of r b (1.18-1.47 Mg m-3), ¦ma (0.14-0.17 m³ m-3) and PR (0.62-0.81 MPa) at the 0-10 cm depth were not restrictive to plant growth. The change in land use from NV to CL or CLF decreased soil organic carbon (SOC) and the soil organic carbon pool (SOCpool). All grazing treatments had a similar SOCpool at the 0-10 cm depth and were lower than that for NV (17.58 Mg ha-1).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The evaluation of technologies employed at the agricultural production system such as crop rotation and soil preparation, both associated with crop-livestock integration, is crucial. Therefore, the aim of the present study was to evaluate the incorporation of lime for three no-tillage systems and cultural managements in system of crop-livestock integration, with emphasis on corn grain yield. The experiment was conducted from January 2003 to April 2005 at Selvíria city, MS, in Dystroferric Red Latosol, clay texture. The experimental design was randomized blocks with split plots consisted of three main treatments, aimed the soil physics conditioning and the incorporation of lime: PD - No-no-tillage; CM - minimum no-tillage, and PC - conventional no-tillage; and of two secondary treatments related to the management: rotation and crop succession, with four replications. Data on agronomic traits of maize were analyzed: plant height, stem diameter, height of the first spike insertion, 100 grains weight and grain yield. The results showed that the maize produced under the system of crop-livestock integration is quite feasible, showing that grain yields are comparable to averages in the region and the different soil physical conditioning and incorporation of lime did not influence the corn yield as well as the cultural managements, rotation and succession, did not affect the maize crop behavior after two years of cultivation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

During the spring, the understanding of regrowth in basal and aerial tillers of deferred pasture in winter it is necessary. Thus, the objective was to evaluate the morphogenesis and herbage accumulation during spring in Brachiaria decumbens cv. Basilisk (signalgrass) pasture used under deferred grazing in winter. The basal and aerial tillers in same pasture were evaluated. The signalgrass was managed with grazing cattle and with an average height of 25 cm. The randomized block design with three replications was adopted. The leaf appearance rate, phyllochron and the numbers of expanded, expanding and live leaves did not differ between basal and aerial tillers. The aerial tiller possessed lower rates of leaf senescence, of leaf elongation and of stem elongation, as well as lower number of dead leaf and stem and leaf lamina lengths, compared to basal tiller. The leaf lifespan was higher in aerial tillers than at basal. The basal tiller also contributed to higher rates of tissue growth and forage accumulation in pasture when compared to aerial tiller. After deferred grazing during the spring, the aerial tiller has low participation in forage production of signalgrass pasture.