Effects of the cationic antimicrobial peptide eumenitin from the venom of solitary wasp Eumenes rubronotatus in planar lipid bilayers: Surface charge and pore formation activity

Eumenitin, a novel cationic antimicrobial peptide from the venom of solitary wasp Eumenes rubronotatus, was characterized by its effects on black lipid membranes of negatively charged (azolectin) and zwitterionic (1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) or DPhPC-cholesterol) phospholipids: surface potential changes, single-channel activity, ion selectivity, and pore size were studied. We found that eumenitin binds preferentially to charged lipid membranes as compared with zwitterionic ones. Eumenitin is able to form pores in azolectin (G(1) = 118.00 +/- 3.67 pS or G(2) = 160.00 +/- 7.07 pS) and DPhPC membranes (G = 61.13 +/- 7.57 pS). Moreover, cholesterol addition to zwitterionic DPhPC membranes inhibits pore formation activity but does not interfere with the binding of peptide. Open pores presented higher cation (K (+)) over anion (Cl-) selectivity. The pore diameter was estimated at between 8.5and 9.8 angstrom in azolectin membranes and about 4.3 angstrom in DPhPC membranes. The results are discussed based on the toroidal pore model for membrane pore-forming activity and ion selectivity. (c) 2007 Elsevier Ltd. All rights reserved.

Laser microstructuring of azopolymers via surface relief gratings: controlling hydrophobicity

In this paper the large-scale mass transport mechanism is used to microstructure azopolymeric films, aiming at controllable hydrophobic surfaces. Using an Ar(+) laser with intensity of 70 mW/cm(2), we produced egg-crate-like surfaces with periods from 1.0 to 3.5 mu m that present distinct wetting properties. The static contact angle of water was measured on the microstructured surfaces, and the results revealed an increase of approximately 9 degrees for a surface pattern period of 2 mu m. Our results indicate the use of the microstructuring method described here for the fabrication of devices with controllable hydrophobicity.

Contrasting magmatic signatures in the Rairakhol and Koraput alkaline complexes, Eastern Ghats belt, India

The relation between alkaline magmatism and tectonism has been a contentious issue, particularly for the Precambrian continental regions. Alkaline complexes at the southwestern margin of Eastern Ghats belt, India, have been interpreted as rift-valley magmatism. However, those complexes occurring in granulite ensemble in the interior segments of the Eastern Ghats belt could not possibly be related to the rift-system, assumed for the western margin of the Eastern Ghats belt. Koraput complex was emplaced in a pull-apart structure, dominated by magmatic fabrics and geochemically similar to a fractionated alkaline complex, compatible with an alkalibasalt series. Rairakhol complex, on the other hand, shows dominantly solid-state deformation fabrics and geochemically similar to a fractionated calc-alkaline suite. Isotopic data for the Koraput complex indicate ca. 917 Ma alkaline magmatism from a depleted mantle source and postcrystalline thermal overprint at ca. 745 Ma, also recorded from sheared metapelitic country rocks. The calc-alkaline magmatism of the Rairakhol complex occurred around 938 Ma, from an enriched mantle source, closely following Grenvillian granulite facies imprint in the charnockitic country rocks.

Imitação publicitária e seus impactos no consumidor

O objetivo deste artigo é discorrer sobre a publicidade imitativa no contexto consumerista. A publicidade imitativa se expressa pela semelhança entre conteúdos apresentados por um anúncio original e o imitador. Trata-se de um estudo exploratório, que fez uso de pesquisa bibliográfica para a construção de conceitos e modelos teóricos ligados à publicidade imitativa e consumidor, além de entrevistas sobre o tema com quatro especialistas. Os resultados mostram que a publicidade imitativa pode gerar impactos consumeristas ao confundir o consumidor, prejudicar suas decisões de consumo quanto à imagem que faz dos anunciantes, suas marcas e produtos, de forma que as normas sobre o tema no Brasil poderiam ser aperfeiçoadas.

Biased managers, organizational design, and incentive provision

We model the tradeoff between the balance and the strength of incentives implicit in the choice between hierarchical and matrix organizational structures. We show that managerial biases determine which structure is optimal: hierarchical forms are preferred when biases are low, while matrix structures are preferred when biases are high.

Sobre o sistema de amortização linear crescente

Aiming to reach a compromise solution to the issues of default risk and the payment capacity of takers of housing loans, Jorge Oscar de Mello Flôres submited to the Banco Nacional de Habitação, which was then in charge of the Brazilian System of Housing Financing, what he named as the Linearly Increasing System of Amortization. (LISA). Following a critical analysis of the LISA, it is proposed the alternative named as the Generalyzed System of Mixed Amortization (GSMA).

Desempenho de computadores

Esta animação descreve as representações de números binários sem sinal, representação de sinal e magnitude, complemento de 1, complemento de 2. Também são apresentadas a adição de números sem sinal, a subtração em complemento de 2, o conceito de overflow e exceção. O projeto de uma unidade lógica e aritmética (ULA) é descrito, assim como alguns exemplos das operações: slt e beq. Três versões da operação de multiplicação, que é mais complicada que a de soma, são apresentadas por meio de figuras e algoritmos. A representação de ponto flutuante e o padrão IEEE 754 também são descritos.

Metodologia BIM: uma nova abordagem, uma nova esperança

A metodologia BIM (Building Information Modeling), tem vindo a ganhar grande importância na indústria da AEC (Arquitetura, Engenharia e Construção). Este conceito introduz alterações muito significativas na forma como atualmente se aborda a conceção, construção e manutenção de edifícios. Apesar da emergente utilização, não existem neste momento normas de boas práticas para a sua implementação em Portugal. O BIM tem como princípios a integração das fases do processo construtivo, a integração e trabalho colaborativo de todas as especialidades envolvidas na fase de projeto, sendo apoiada por aplicações de visualização tridimensional. O grande potencial do conceito BIM está também na normalização da informação, sendo suportada entre outros aspetos na normalização da forma como se devem modelar os objetos. Assente nesta base são várias as potencialidades que daqui decorrem. No âmbito desta dissertação pretende-se abordar e aplicar a metodologia BIM ao projeto de estruturas e de especialidades que foi previamente elaborado segundo a metodologia tradicional (CAD 2D). Pretende-se, clarificar a metodologia BIM e avaliar algumas das ferramentas computacionais disponíveis no mercado. O caso de estudo da presente dissertação, permitiu identificar algumas dificuldades e falhas existentes nos projetos a 2D, o que não acontece no caso da metodologia BIM.

Associação de bioensaios e caracterização molecular para seleção de novos isolados de Bacillus thuringiensis efetivos contra Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Prevalence of newcastle disease virus in broiler chickens (Gallus gallus) in Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Energy and lysine for broilers from 44 to 55 days of age

An experiment was conducted to evaluate the performance and carcass yield of broilers at 55 days of age fed diets with different levels of metabolizable energy and lysine. Evaluated data of performance were weight gain, feed intake, energy intake, lysine intake, caloric conversion and feed conversion. Carcass assessment was performed based on data from carcass yield, breast weight, whole wings, whole legs, back, head + neck, feet and abdominal fat. A 3 x 3 factorial arrangement was used, with 3 levels of metabolizable energy (3,200; 3,400 and 3,600 kcal ME/kg) and 3 lysine levels (0.95%; 1.05% and 1.15%). There was no interaction between the two factors. Nevertheless, increasing levels of metabolizable energy improved weight gain (745 g; 841 g and 910 g, respectively) and feed intake was higher in broilers receiving the diets with 3,200 and 3,600 kcal ME/kg. Overall performance was not affected by lysine levels. Feed conversion values were 2.69, 2.42 and 2.14 for birds fed diets with 3,200; 3,400 and 3,600 kcal ME/kg, respectively. Carcass yield and breast weight increased with higher levels of energy and lysine in the diets.

Utilização de águas residuárias provenientes do tratamento biológico de esgotos domésticos na produção de mudas de Eucalyptus grandis Hill. ex. maiden

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The contribution of 700,000 ORF sequence tags to the definition of the human transcriptome

open reading frame expressed sequences tags (ORESTES) differ from conventional ESTs by providing sequence data from the central protein coding portion of transcripts. We generated a total of 696,745 ORESTES sequences from 24 human tissues and used a subset of the data that correspond to a set of 15,095 full-length mRNAs as a means of assessing the efficiency of the strategy and its potential contribution to the definition of the human transcriptome. We estimate that ORESTES sampled over 80% of all highly and moderately expressed, and between 40% and 50% of rarely expressed, human genes. In our most thoroughly sequenced tissue, the breast, the 130,000 ORESTES generated are derived from transcripts from an estimated 70% of all genes expressed in that tissue, with an equally efficient representation of both highly and poorly expressed genes. In this respect, we find that the capacity of the ORESTES strategy both for gene discovery and shotgun transcript sequence generation significantly exceeds that of conventional ESTs. The distribution of ORESTES is such that many human transcripts are now represented by a scaffold of partial sequences distributed along the length of each gene product. The experimental joining of the scaffold components, by reverse transcription-PCR, represents a direct route to transcript finishing that may represent a useful alternative to full-length cDNA cloning.