Characterization of Five Different Implant Surfaces and Their Effect on Osseointegration: A Study in Dogs

Background: Chemical modification of implant surface is typically associated with surface topographic alterations that may affect early osseointegration. This study investigates the effects of controlled surface alterations in early osseointegration in an animal model.Methods: Five implant surfaces were evaluated: 1) alumina-blasting, 2) biologic blasting, 3) plasma, 4) microblasted resorbable blasting media (microblasted RBM), and 5) alumina-blasting/acid-etched (AB/AE). Surface topography was characterized by scanning electron microscopy and optical interferometry, and chemical assessment by x-ray photoelectron spectroscopy. The implants were placed in the radius of six dogs, remaining 2 and 4 weeks in vivo. After euthanization, specimens were torqued-to-interface failure and non-decalcified - processed for histomorphologic bone-implant contact, and bone area fraction-occupied evaluation. Statistical evaluation was performed by one-way analysis of variance (P < 0.05) and post hoc testing by the Tukey test.Results: The alumina-blasting surface presented the highest average surface roughness and mean root square of the surface values, the biologic blasting the lowest, and AB/AE an intermediate value. The remaining surfaces presented intermediate values between the biologic blasting and AB/AE. The x-ray photoelectron spectroscopy spectra revealed calcium and phosphorus for the biologic blasting and microblasted RBM surfaces, and the highest oxygen levels for the plasma, microblasted RBM, and AB/AE surfaces. Significantly higher torque was observed at 2 weeks for the microblasted RBM surface (P < 0.04), but no differences existed between surfaces at 4 weeks (P > 0.74). No significant differences in bone-implant contact and bone area fraction-occupied values were observed at 2 and 4 weeks.Conclusion: The five surfaces were osteoconductive and resulted in high degrees of osseointegration and biomechanical fixation. J Periodontol 2011;82:742-750.

Morphological features and occurrence of degenerative characteristics in the hypopharyngeal glands of the paper wasp Polistes versicolor (Olivier) (Hymenoptera : Vespidae)

Different histochemical techniques were applied to examine the morphological features of the secretory cells of hypopharyngeal glands in the wasp Polistes versicolor. The results showed that most analyzed individuals present active glands with secretion stored in the cytoplasm. In some glands, morphological analyses revealed the presence of degenerative characteristics. Analyses of cellular integrity, however, did not detect dead cells. The results showed that, in P. versicolor, the development and regression of the hypopharyngeal glands were not age related, unlike glands of social bees. (c) 2006 Elsevier Ltd. All rights reserved.

Antiviral activities of plants occurring in the state of Minas Gerais, Brazil: Part 2. Screening Bignoniaceae species

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphology and bacterial colonisation of tooth/ceramic restoration interface after different cement excess removal techniques

Objectives: To evaluate the influence of different protocols for resin cement removal during cementation on biofilm formation.Methods: Twenty-eight ceramic blocks, which were injected under pressure, were placed over enamel blocks obtained from freshly extracted bovine incisors. The ceramic blocks were cemented to the enamel blocks using a dual-cured resin cement and the excess resin was removed according to the experimental group: TS: Teflon spatula; BR: brush; BR+: brush and polishing; SB+: scalpel blade and polishing. After autoclaving, the samples were colonised by incubation in a sucrose broth suspension standardised with Streptococcus mutans in microaerophilic stove. Specimens were quantitatively analysed for bacterial adherence at the adhesive interface using confocal laser scanning microscopy and counting the colony forming units, and qualitatively analysed using SEM. The roughness (Ra/Rz/RSm) was also analysed. Data were analysed by 1-way ANOVA and Tukey's test (5%).Results: The roughness values ranged from 0.96 to 1.69 mu m for Ra (p > 0.05), from 11.59 to 22.80 mu m for Rz (p = 0.02 < 0.05) and from 293.2 to 534.3 mu m for RSm (p = 0.00). Bacterial adhesion varied between 1,974,000 and 2,814,000 CFU/ml (p = 0.00). Biofilm mean thickness ranged from 0.477 and 0.556 mu m (p > 0.05), whilst the biovolume values were between 0.388 and 0.547 mu m(3)/mu m(2) (p = 0.04). Lower values for roughness, bacterial adhesion, biofilm thickness and biovolume were found with BR, whilst TS presented the highest values for most of the parameters. SEM images confirmed the quantitative values.Conclusions: The restoration margin morphology and interface roughness affects bacterial accumulation. The brush technique promoted less bacterial colonisation at the adhesive interface than did the other removal methods.Clinical significance: The brush technique seems to be a good option for removing the excess resin cement after adhesive cementation in clinical practice, as indicated by its better results with lower bacterial colonisation. (C) 2012 Elsevier Ltd. All rights reserved.

On dynamical gluon mass generation

The effective gluon propagator constructed with the pinch technique is governed by a Schwinger-Dyson equation with special structure and gauge properties, that can be deduced from the correspondence with the background field method. Most importantly the non-perturbative gluon self-energy is transverse order-by-order in the dressed loop expansion, and separately for gluonic and ghost contributions, a property which allows for a meanigfull truncation. A linearized version of the truncated Schwinger-Dyson equation is derived, using a vertex that satisfies the required Ward identity and contains massless poles. The resulting integral equation, subject to a properly regularized constraint, is solved numerically, and the main features of the solutions are briefly discussed.

Investigação de Er3+ nos dois sítios cristalográficos de Gd2SiO5 através da fotoluminescência resolvida no tempo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variabilidade espacial e controle estatístico do processo de perdas na colheita mecanizada do algodoeiro

Dentro do processo produtivo, a colheita, se mal conduzida, poderá causar prejuízos quali-quantitativos no produto final. Dessa forma, esse trabalho teve o objetivo de avaliar as perdas quantitativas, no solo e na planta, na colheita mecanizada de algodão, no ano agrícola de 2006, em Ipameri-GO, em um talhão de 1,4 ha, sendo georreferenciados 41 pontos, distanciados de 50 m no sentido da curva de nível e 9 m entre fileiras. As amostras foram coletadas colocando-se uma armação de 4,5 m² sobre o solo, coletando todo o algodão caído no solo e, em seguida, fez-se a coleta do algodão que permaneceu na planta após a passagem da colhedora. Além das perdas quantitativas determinaram-se o teor médio de água do algodão e o Rendimento Potencial Máximo (RPM). Foram construídas cartas de controle para verificar a qualidade da operação de colheita. Observou-se que as perdas na colheita do algodão foram altas, principalmente as perdas no solo (PS), indicando que a colhedora não apresentou boa eficiência de colheita. As perdas no solo não apresentaram dependência espacial, enquanto as perdas na planta e totais apresentaram dependência moderada e forte, respectivamente. O processo de colheita de algodão não se encontra dentro dos padrões de qualidade, sob o ponto de vista de controle estatístico de processo, devendo ser revistas as condições de colheita.

Teste de deterioração controlada na avaliação do vigor de sementes de milho

Objetivou-se com este trabalho estudar combinações de tempo e temperatura na adequação do teste de deterioração controlada para avaliação do vigor de sementes de milho com diferentes teores de água. Foram utilizados oito lotes de sementes de milho híbrido CO32, cuja qualidade inicial foi determinada pelos testes de: teor de água, massa de mil sementes, porcentagens de germinação e de plântulas normais na primeira contagem do teste de germinação, massa seca das porções aérea, radicular e total de plântulas, teste de frio, teste de envelhecimento acelerado, teste de condutividade elétrica, tetrazólio, emergência de plântulas no campo e velocidade de emergência de plântulas no campo. A umidade inicial dos lotes de sementes foi ajustada pelo método de imersão em água para 15, 20 e 25%. Para cada teor de água foram avaliadas nove combinações de períodos (16, 24 e 48 horas) e temperaturas de deterioração (42, 45 e 48 °C). Após a deterioração determinou-se o teor de água e a porcentagem de germinação das sementes. Os dados foram submetidos à análise de variância e as médias comparadas pelo teste de Tukey e análise de correlação aos 5% em esquema fatorial 9X8, sendo nove combinações de tempo e temperatura e oito lotes de sementes. As combinações 24 h-45 °C, 48 h-45 °C e 16 h-45 °C para sementes com teor de água ajustado para 15, 20 e 25%, respectivamente, são eficientes para avaliação do vigor de sementes de milho pelo teste de deterioração controlada.

Crescimento e qualidade de crisântemo cultivado em vaso sob ambiente protegido

O crisântemo (Dendranthema grandiflora) é uma planta ornamental com grande demanda pelo mercado consumidor. Apesar de haver poucas informações sobre a sua exigência hídrica, sabe-se que irrigações deficitárias ou excessivas prejudicam seu desenvolvimento, reduzindo a produtividade e a qualidade. Considerando-se a importância da qualidade para a venda dos produtos florícolas o objetivo desse trabalho foi identificar a tensão de água no substrato (potencial matricial) com melhor crescimento e desenvolvimento do crisântemo, cultivar Rage, em vaso. Os tratamentos foram definidos por 6 níveis de tensão de água no substrato: -2; -3; -4; -6; -10 e -30 kPa. Concluiu-se que a melhor qualidade do crisântemo em vaso pode ser obtida com a tensão de -4 kPa e que, embora a tensão de -30 kPa tenha levado a uma drástica redução na qualidade comercial do crisântemo, a mesma pode ter um efeito benéfico na durabilidade pós- colheita.

Aspectos biológicos do camarão-espinho Exhippolysmata oplophoroides (Holthuis, 1948) (Crustacea, Caridea, Hippolytidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Utilização de redes neurais artificiais para a determinação do número de refeições diárias de um restaurante universitário

OBJETIVO: Construir uma rede neural artificial para auxiliar os gestores de restaurantes universitários na previsão de refeições diárias. MÉTODOS: O estudo foi desenvolvido a partir do levantamento de oito variáveis que influenciam o número de refeições diárias servidas no restaurante universitário. Utiliza-se o algoritmo de treinamento Backpropagation. Os resultados por meio da rede são comparados com os da série estudada e com resultados da estimação por média aritmética simples. RESULTADOS: A rede proposta acompanha as inúmeras alterações que ocorrem no número de refeições diárias do restaurante universitário. em 73% dos dias analisados, o método das redes neurais artificiais apresenta uma taxa de acerto maior do que o método da média aritmética simples. CONCLUSÃO: A rede neural artificial mostrou-se mais adequada para a previsão do número de refeições do que a metodologia de média simples ou quando a decisão do número de refeições é feita de forma subjetiva, sem critérios científicos.

Photoelectrochemical properties of sol-gel Nb2O5 films

Structural, optical, electro and photoelectrochemical properties of amorphous and crystalline sol-gel Nb2O5 coatings have been determined. The coatings are n-type semiconductor with indirect allowed transition and present an overall low quantum efficiency (phi < 4%) for UV light to electric conversion. The photoconducting behavior of the coatings is discussed within the framework of the Gartner and Sodergren models. Improvement can be foreseen if Nb2O5 coatings can be made of 10-20 nm size nanoparticles.

Electrical and micro structural properties of (Zn, Nb, Fe)-doped SnO2 varistor systems

The electrical and microstructural properties of SnO2-based varistors with the addition of 0.025 and 0.050 mol% of Fe2O3 have been characterised. Electric field (E) versus current density (J) curves showed that the effect of Fe2O3 addition is to increase both the non-linear coefficient and the breakdown voltage. Variations in the potential barrier height were inferred from impedance spectroscopy (IS) analysis. Through transmission electron microscopy (TEM), the presence of precipitates of secondary phases was confirmed. Samples with precipitates displayed poor electrical properties. (c) 2004 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Power system transmission network expansion planning using AC model

An optimisation technique to solve transmission network expansion planning problem, using the AC model, is presented. This is a very complex mixed integer nonlinear programming problem. A constructive heuristic algorithm aimed at obtaining an excellent quality solution for this problem is presented. An interior point method is employed to solve nonlinear programming problems during the solution steps of the algorithm. Results of the tests, carried out with three electrical energy systems, show the capabilities of the method and also the viability of using the AC model to solve the problem.

Efeito da Duração do Cio sobre a Fertilidade de Éguas Inseminadas com Sêmen Eqüino Diluído, Resfriado a 20oC e Transportado

The objective of this study was to evaluate the effect of different interval from the beginning of the heat to the ovulation on the fertility of inseminated mares with diluted equine semen, cooled at 20 degrees C and transported, the mares were grouped with the following interval periods: T1 - period less than five days, T2 - period from five to seven days and T3 - period from 8 to 21 days. The conception rates in the first cycle were 53.85 (7/13), 52.17 (12/23) and 66.67% (10/15) for treatments 1, 2 and 3, respectively, and after three cycles, 50.00 (9/18), 48.15 (13/27) and 64.71% (11/17), in the same preceding order. The duration of heat, in the conditions of this experiment, did not influence the fertility of inseminated mares.