On the epochal variation of intensity of tropical cyclones in the Arabian Sea

During recent years, an increase in the intensity of pre-monsoon tropical cyclones (TCs) is observed over the Arabian Sea. This study suggests that this increase is due to epochal variability in the intensity of TCs and is associated with epochal variability in the storm-ambient vertical wind shear and tropical cyclone heat potential (TCHP). There is a significant increase (0.53kJcm(-2)year(-1)) of TCHP during recent years. The warmer upper ocean helps TCs to sustain or increase their intensity by an uninterrupted supply of sensible and latent heat fluxes from the ocean surface to the atmosphere.

Scheduling for Fading Channels Under Partial Channel Information

We consider a scheduler for the downlink of a wireless channel when only partial channel-state information is available at the scheduler. We characterize the network stability region and provide two throughput-optimal scheduling policies. We also derive a deterministic bound on the mean packet delay in the network. Finally, we provide a throughput-optimal policy for the network under QoS constraints when real-time and rate-guaranteed data traffic may be present.

Evaluation of Brugia malayi sheath protein (Shp-1) as a diagnostic antigen for human lymphatic filariasis

Lymphatic filariasis is the second leading cause of permanent long-term disability globally and control of this disease needs efficient diagnostic methods. In this study, abundantly expressing microfilarial sheath protein (Shp-1) from Brugia malayi was characterized as a filarial diagnostic candidate using samples from different clinical population. Monoclonal antibodies were developed against E. coil expressed recombinant Shp-1 in order to assess its efficiency in filarial antigen detection assay system. Endemic Normal (EN, n = 170), asymptomatic microfilaeremics (MF, n = 65), symptomatic chronic pathology (CP, n = 45) and non endemic normal (NEN, n = 10) sera were analyzed by antigen capture enzyme-linked immunosorbent assay. Of the 290 individuals, all MF individuals (both brugian and bancroftian) were positive in this assay followed by CP and EN. When compared with SXP-1 and Og4C3 antigen assays, all assays detected Wb MF correctly, Bm MF was detected by Shp-1 and SXP-1 assays, and only Shp-1 was able to detect EN (12%) and CP (29%). Results showed that this assay may be useful for monitoring prior to mass drug administration. (c) 2014 Elsevier Inc. All rights reserved.

Low-Cost Cloud-Based Design of Smart Rural Energy Device in Microgrid: Perspective India An Energy-On-Demand Service for Rural India

In this paper we present a combination of technologies to provide an Energy-on-Demand (EoD) service to enable low cost innovation suitable for microgrid networks. The system is designed around the low cost and simple Rural Energy Device (RED) Box which in combination with Short Message Service (SMS) communication methodology serves as an elementary proxy for Smart meters which are typically used in urban settings. Further, customer behavior and familiarity in using such devices based on mobile experience has been incorporated into the design philosophy. Customers are incentivized to interact with the system thus providing valuable behavioral and usage data to the Utility Service Provider (USP). Data that is collected over time can be used by the USP for analytics envisioned by using remote computing services known as cloud computing service. Cloud computing allows for a sharing of computational resources at the virtual level across several networks. The customer-system interaction is facilitated by a third party Telecom Service provider (TSP). The approximate cost of the RED Box is envisaged to be under USD 10 on production scale.

Influence of film thickness on the properties of sprayed ZnO thin films for gas sensor applications

Transparent conducting ZnO films were prepared at substrate temperature 400 degrees C with different film thicknesses by nebulizer spray pyrolysis method on glass substrates. XRD studies reveal that the films are polycrystalline in nature having hexagonal crystal structure with preferred grain orientations along (0 0 2) and (1 0 1) directions. The crystallite size increases along (0 0 2) plane with the thickness increase and attains a maximum 109 nm for 913 nm film thickness. Analysis of structural parameters indicates that the films having thickness 913 nm are found to have minimum dislocation density and strain values. The HRSEM measurements show that the surface morphology of the films also changes with film thickness. EDAX estimates the average atomic percentage ratio of Zn and O in the ZnO films. Optical studies reveal the band gap energy decrease from 3.27 to 3.14 eV with increase of film thickness. Room temperature PL spectra show the near-band-edge emission and deep-level emission due to the presence of defects in the ZnO thin films. Impedance spectroscopy analysis indicates that grain boundary resistance decreases with the increasing ammonia concentration up to 500 ppm and the maximum sensitivity is found to be 1.7 for 500 ppm of ammonia. (C) 2014 Elsevier Ltd. All rights reserved.

Optimal error estimate using mesh equidistribution technique for singularly perturbed system of reaction-diffusion boundary-value problems

In this article, we study the problem of determining an appropriate grading of meshes for a system of coupled singularly perturbed reaction-diffusion problems having diffusion parameters with different magnitudes. The central difference scheme is used to discretize the problem on adaptively generated mesh where the mesh equation is derived using an equidistribution principle. An a priori monitor function is obtained from the error estimate. A suitable a posteriori analogue of this monitor function is also derived for the mesh construction which will lead to an optimal second-order parameter uniform convergence. We present the results of numerical experiments for linear and semilinear reaction-diffusion systems to support the effectiveness of our preferred monitor function obtained from theoretical analysis. (C) 2014 Elsevier Inc. All rights reserved.

Sparse Representation Based Acoustic Rangefinders: From Sensor Platforms to Mobile Devices

Acoustic rangerfinders are a promising technology for accurate proximity detection, a critical requirement for many emerging mobile computing applications. While state-of-the-art systems deliver robust ranging performance, the computational intensiveness of their detection mechanism expedites the energy depletion of the associated devices that are typically powered by batteries. The contribution of this article is fourfold. First, it outlines the common factors that are important for ranging. Second, it presents a review of acoustic rangers and identifies their potential problems. Third, it explores the design of an information processing framework based on sparse representation that could potentially address existing challenges, especially for mobile devices. Finally, it presents mu-BeepBeep: a low energy acoustic ranging service for mobile devices, and empirically evaluates its benefits.

Study of Multilevel Sinusoidal PWM methods for Cascaded H-Bridge Multilevel Inverters

This paper is a study of Multilevel Sinusoidal Pulse Width Modulation (MSPWM) methods; Phase Disposition (PD), Alternate Phase Opposition Disposition (APOD), Phase Opposition Disposition (POD) on a single phase Cascaded H-Bridge Multilevel inverter. Various factors such as amplitude modulation index (Ma), frequency modulation index (M-f), phase angle between carrier and reference modulating wave (phi) have been considered for simulation. Variation in these factors and their effect on inverter performance is evaluated. Factors such as DC bus utilization, output r.m.s voltage, total harmonic distortion (%THD), dominant harmonic order, switching losses are evaluated based on simulation results.

Parameterized Algorithms and Kernels for 3-Hitting Set with Parity Constraints

The 3-Hitting Set problem involves a family of subsets F of size at most three over an universe U. The goal is to find a subset of U of the smallest possible size that intersects every set in F. The version of the problem with parity constraints asks for a subset S of size at most k that, in addition to being a hitting set, also satisfies certain parity constraints on the sizes of the intersections of S with each set in the family F. In particular, an odd (even) set is a hitting set that hits every set at either one or three (two) elements, and a perfect code is a hitting set that intersects every set at exactly one element. These questions are of fundamental interest in many contexts for general set systems. Just as for Hitting Set, we find these questions to be interesting for the case of families consisting of sets of size at most three. In this work, we initiate an algorithmic study of these problems in this special case, focusing on a parameterized analysis. We show, for each problem, efficient fixed-parameter tractable algorithms using search trees that are tailor-made to the constraints in question, and also polynomial kernels using sunflower-like arguments in a manner that accounts for equivalence under the additional parity constraints.

Microstructural evolution and strength variability in microwires

Tensile experiments on cold-drawn Ni microwires with diameters from similar to 115 to 50 gm revealed high strengths, with significant strength variability for finer wires with diameters less than similar to 50 gm. The wires showed pronounced necking at fracture. The coarser wires with diameters > 50 mu m exhibited conventional ductile cup-cone fracture, with dimples in the central zone and peripheral shear lips, whereas finer wires failed by shear with knife or chisel-edge fractures. Shear bands were observed in all samples. Further, through- section microscopy of selected fractured samples revealed that the shear bands did not go across the enitre specimen for the coarser wires. The shear bands led to grain fragmention, with a reduction in grain aspect ratio as well as rotations away from the initial < 111 > orientations. The strength data were analysed based on a Weibull approach. The data could be rationalized in terms of failure from volume defects in coarser wires, with a high Weibull modulus, and from surface defects in finer wires, with a low Weibull modulus and greater variability. (C) 2015 Elsevier B.V. All rights reserved.

Estudio epidemiológico de la prevalencia de tórsalo (Dermatobia hominis) en bovinos en San Pedro de Lóvago, Chontales, Nicaragua

El presente estudio se realizó con el objetivo de determinar la prevalencia del tórsalo (Dermatobia hominis) en fincas de las diferentes comarcas ubicadas en el Municipio de San Pedro de Lóvago, departamento de Chontales. El municipio se localiza entre las coordenadas 12º 07 ́ latitud norte y 85º07 ́ latitud oeste. La altitud promedio es de 340msnm. El clima es semi húmedo conocido como de sabana tropical. La temperatura promedio anual oscila entre los 25 y 26ºC; su precipitación pluvial varía entre los 1 200 y 1 400mm, caracterizándose por una buena distribución de las lluvias durante todo el año. En el trabajo de muestreo se utilizó un estudio observacional de tipo transversal, utilizándose un muestreo sin reemplazo. Para determinar el tamaño de la muestra se utilizó la formula de Martin et al. (1987) y Trusfield, (1995) donde plantean que N = 1,962* p *q / L 2,donde p es la prevalencia, q = 1 – p y L especifica el límite deseado de error de la prevalencia. Se espera que la prevalencia (p) de 50% sea usada en combinación con él límite deseado de error de 14%, si la prevalencia en la población entera es desconocida. Y cuando la población de bovinos está comprendida entre los rangos de 2 807 a 7 480 individuos de la población. El tamaño requerido de la muestra de este trabajo fue de 52 fincas en producción de toda la zona en estudio. Los resultados obtenidos en el municipio de San Pedro de Lóvago en relación a la Prevalencia de tórsalo en bovinos, de un total de 52 fincas estudiadas, de los cuales se examinaron un total 1 317 animales, de los cuales 1 068 resultaron positivos representando el 81% de prevalencia y 249 animales negativos para un 19%. Al realizar el análisis estadístico se encontró diferencia significativa (p <0.05) entre las regiones anatómicas, siendo las regiones Laterales Toráxico-abdominal derecha, la más afectada. Al relacionar la intensidad de invasión del tórsalo de acuerdo al color de la piel, se observó que existe mayor presentación del mismo en los animales de color Negro, seguido del color Osca, Blanco y color Pardo.

Electronic structure and surface properties of SrBi2Ta2O9 and related oxides

The electronic structure of SrBi2Ta2O9 and related oxides such as SrBi2Nb2O9, Bi2WO6 and Bi3Ti4O12 have been calculated by the tight-binding method. In each case, the band gap is about 4.1 eV and the band edge states occur on the Bi-O layers and consist of mixed O p/Bi s states at the top of the valence band and Bi p states at the bottom of the conduction band. The main difference between the compounds is that Nb 5d and Ti 4d states in the Nb and Ti compounds lie lower than the Ta 6d states in the conduction band. The surface pinning levels are found to pin Schottky barriers 0.8 eV below the conduction band edge.

La beneficencia en Lleida durante el trienio liberal

La Guerra de la Independencia generó miseria y ruina, aumentando la pobreza material y el descenso del poder adquisitivo de la población. Fruto de este negativo contexto económico los ayuntamientos solamente pudieron destinar una décima parte de su presupuesto a la beneficencia. Los efectos de la contienda bélica contra Napoleón también afectaron a la Iglesia, institución que tradicionalmente mediante diversos organismos eclesiásticos tuvo que atender las enormes carestías sociales que asolaban al pueblo, como por ejemplo, otorgar limosna, atender a los enfermos en los hospitales, acoger a los huérfanos en los hospicios o educar a los más jóvenes. En el caso de Lleida durante el régimen liberal cabe destacar la organización de diversas juntas de caridad, de sanidad y de beneficencia destinadas a socorrer a los más necesitados.

Evaluación de tres tipos de fertilizantes (gallinaza, estiércol vacuno y un fertilizante mineral) en el cultivo de maiz (Zea mays L.) variedad NB-6

El presente trabajo fue realizado en el departamento de Carazo en la unidad experimental La Compañía, ubicada en el km. 45 de la carretera San Marcos–Masatepe durante la época de primera (2001). Los suelos de esta estación son originados a partir de cenizas volcánicas de textura franco-limosa su pH es considerado de medio ácido a neutro, buena profundidad y buena permeabilidad. El propósito del experimento fue la evaluación del cultivo de maíz (Zea mays L.), ante la aplicación de tres tipos de fertilizantes (gallinaza, estiércol vacuno y un fertilizante mineral de la formula 18-46-0). Las dosis utilizadas fueron calculadas a partir de los requerimientos del cultivo y apoyados en un análisis de suelo realizado previo a la siembra, de tales resultados se aplicaron las dosis de 2772.84 y 1386.42 kg/ha de gallinaza, 2303.59 y 1151.79 kg/ha de estiércol y para el fertilizante mineral las dosis de 249.56 y 124.78kg/ha respectivamente. Las parcelas experimentales tuvieron un tamaño de 20 m2. La variedad de maíz evaluada fue la variedad NB-6, de la cual se utilizó semilla certificada, se usó un arreglo unifactorial con un diseño de bloques completos al azar (B.C.A), con siete tratamientos y cuatro repeticiones. Las variables evaluadas fueron: Altura de planta, Número de hojas, Diámetro del tallo, la Altura de la hoja bandera, Altura de inserción de la mazorca, Número de fruto por planta y Componentes del rendimiento como son: número de hileras por mazorca, largo de la mazorca, número de granos por hilera y el diá metro de la mazorca. A los datos obtenidos se le realizó un análisis estadístico usando el análisis de varianza utilizando el comparador de Tukey al 95 % de confiabilidad. Este análisis se realizó en el programa estadístico MINITAB y SAS. También se realizó un análisis económico para conocer la tasa de retorno marginal, que se obtiene con la inversión de cualquiera de los tratamientos evaluados. Los mejores resultados en cuanto al rendimiento agrícola, así como la mayor tasa de retorno marginal, se obtuvieron con la aplicación de 2772.84 kg/ha de gallinaza obteniéndose un rendimiento de 5848.86 kg/ha, y una tasa de retor no marginal de 662 %.