Northeast monsoon over India: variability and prediction

South peninsular India experiences a large portion of the annual rainfall during the northeast monsoon season (October to December). In this study, the facets of diurnal, intra-seasonal and inter-annual variability of the northeast monsoon rainfall (the NEMR) over India have been examined. The analysis of satellite derived hourly rainfall reveals that there are distinct features of diurnal variation over the land and oceans during the season. Over the land, rainfall peaks during the late afternoon/evening, while over the oceans an early morning peak is observed. The harmonic analysis of hourly data reveals that the amplitude and variance are the largest over south peninsular India. The NEMR also exhibits significant intra-seasonal variability on a 20-40 day time scale. Analysis also shows significant northward propagation of the maximum cloud zone from south of equator to the south peninsula during the season. The NEMR exhibits large inter-annual variability with the co-efficient of variation (CV) of 25%. The positive phases of ENSO and the Indian Ocean Dipole (IOD) are conducive for normal to above normal rainfall activity during the northeast monsoon. There are multi-decadal variations in the statistical relationship between ENSO and the NEMR. During the period 2001-2010 the statistical relationship between ENSO and the NEMR has significantly weakened. The analysis of seasonal rainfall hindcasts for the period 1960-2005 produced by the state-of-the-art coupled climate models, ENSEMBLES, reveals that the coupled models have very poor skill in predicting the inter-annual variability of the NEMR. This is mainly due to the inability of the ENSEMBLES models to simulate the positive relationship between ENSO and the NEMR correctly. Copyright (C) 2012 Royal Meteorological Society

Experiments on and thermodynamic analysis of a turbocharged engine with producer gas as fuel

This article presents the studies conducted on turbocharged producer gas engines designed originally for natural gas (NG) as the fuel. Producer gas, whose properties like stoichiometric ratio, calorific value, laminar flame speed, adiabatic flame temperature, and related parameters that differ from those of NG, is used as the fuel. Two engines having similar turbochargers are evaluated for performance. Detailed measurements on the mass flowrates of fuel and air, pressures and temperatures at various locations on the turbocharger were carried out. On both the engines, the pressure ratio across the compressor was measured to be 1.40 +/- 0.05 and the density ratio to be 1.35 +/- 0.05 across the turbocharger with after-cooler. Thermodynamic analysis of the data on both the engines suggests a compressor efficiency of 70 per cent. The specific energy consumption at the peak load is found to be 13.1 MJ/kWh with producer gas as the fuel. Compared with the naturally aspirated mode, the mass flow and the peak load in the turbocharged after-cooled condition increased by 35 per cent and 30 per cent, respectively. The pressure ratios obtained with the use of NG and producer gas are compared with corrected mass flow on the compressor map.

Adaptation of small capacity natural gas engine for producer gas operation

This article addresses the adaptation of a low-power natural gas engine for using producer gas as a fuel. The 5.9 L natural gas engine with a compression ratio of 10.5:1, rated at 55 kW shaft power, delivered 30 kW using producer gas as fuel in the naturally aspirated mode. Optimal ignition timing for peak power was found to be 20 degrees before top dead centre. Air-to-fuel ratio (A/F) was found to be 1.2 +/- 0.1 over a range of loads. Critical evaluation of the energy flows in the engine resulted in identifying losses and optimizing the engine cooling. The specific fuel consumption was found to be 1.2 +/- 0.1 kg of biomass per kilowatt hour. A reduction of 40 per cent in brake mean effective pressure was observed compared with natural gas operation. Governor response to load variations has been studied with respect to frequency recovery time. The study also attempts to adopt a turbocharger for higher power output. Preliminary results suggest a possibility of about 30 per cent increase in the output.

Investigations on supersonic combustion in a combustion-driven shock tunnel

This article reports experimental results on supersonic combustion in a new facility. The facility is a combustion-driven shock tunnel, which is cheaper to build than the facilities in which such experiments are carried out conventionally. The observation region is a zone between two parallel flat plates with a 33 degrees wedge attached to the upstream end of the bottom plate. Gaseous hydrogen is injected at an angle of 45 degrees into an oncoming supersonic flow of Mach 2 (approximate) from a port on the bottom plate. The resulting flow field is visualized by a high speed camera in a dark background. Three different test gases, namely nitrogen, air, and oxygen-rich air are used, and the results are compared. A distinct luminosity due to combustion for oxygen-containing test gases is observed. Heat-transfer rates on a probe placed at the downstream end of the observation region and midway between the parallel plates are measured and compared for the three cases. Wall static pressure at 28 mm downstream of the injection port on the bottom plate is also presented.

Theoretical-experimental study of shock wave-assisted metal forming process using a diaphragmless shock tube

The use of high-velocity sheet-forming techniques where the strain rates are in excess of 10(2)/s can help us solve many problems that are difficult to overcome with traditional metal-forming techniques. In this investigation, thin metallic plates/foils were subjected to shock wave loading in the newly developed diaphragmless shock tube. The conventional shock tube used in the aerodynamic applications uses a metal diaphragm for generating shock waves. This method of operation has its own disadvantages including the problems associated with repeatable and reliable generation of shock waves. Moreover, in industrial scenario, changing metal diaphragms after every shot is not desirable. Hence, a diaphragmless shock tube is calibrated and used in this study. Shock Mach numbers up to 3 can be generated with a high degree of repeatability (+/- 4 per cent) for the pressure jumps across the primary shock wave. The shock Mach number scatter is within +/- 1.5 per cent. Copper, brass, and aluminium plates of diameter 60 mm and thickness varying from 0.1 to 1 mm are used. The plate peak over-pressures ranging from 1 to 10 bar are used. The midpoint deflection, circumferential, radial, and thickness strains are measured and using these, the Von Mises strain is also calculated. The experimental results are compared with the numerical values obtained using finite element analysis. The experimental results match well with the numerical values. The plastic hinge effect was also observed in the finite element simulations. Analysis of the failed specimens shows that aluminium plates had mode I failure, whereas copper plates had mode II failure.

A cyclic peptide mimic of an RNA recognition motif of human La protein is a potent inhibitor of hepatitis C virus

Due to limited available therapeutic options, developing new lead compounds against hepatitis C virus is an urgent need. Human La protein stimulates hepatitis C virus translation through interaction with the hepatitis C viral RNA. A cyclic peptide mimicking the beta-turn of the human La protein that interacts with the viral RNA was synthesized. It inhibits hepatitis C viral RNA translation significantly better than the corresponding linear peptide at longer post-treatment times. The cyclic peptide also inhibited replication as measured by replicon RNA levels using real time RT-PCR. The cyclic peptide emerges as a promising lead compound against hepatitis C.

Biodegradation of sodium isopropyl xanthate by Paenibacillus polymyxa and Pseudomonas putida

Biodegradation of sodium isopropyl xanthate using two types of bacterial strains, Paenibacillus polymyxa and Pseudomonas putida, is demonstrated. At concentrations higher than 50 mg/L, the presence of xanthate in the growth medium resulted in bacterial toxicity, retarding growth kinetics. Adaptation through serial subculturing in the presence of higher xanthate concentrations resulted in the development of xanthate-tolerant bacterial strains. Stress proteins secreted by bacterial cells grown in the presence of xanthate were isolated. Bacterial cells could utilize xanthate as a growth substrate, degrading xanthate species in the process. Acidic metabolic products generated by bacterial metabolism promoted efficient xanthate decomposition. Probable mechanisms for the biodegradation of isopropyl xanthate are illustrated.

Effect of analyte concentration on the laser-induced plasma temperature and electron density in liquid matrix

In the present work, we report spectroscopic studies of laser-induced plasmas produced by focusing the second harmonic (532nm) of a Nd:YAG laser onto the laminar flow of a liquid containing chromium. The plasma temperature is determined from the coupled Saha-Boltzmann plot and the electron density is evaluated from the Stark broadening of an ionic line of chromium Cr(II)] at 267.7nm. Our results reveal a decrease in plasma temperature with an increase in Cr concentration up to a certain concentration level; after that, it becomes approximately constant, while the electron density increases with an increase in analyte (Cr) concentration in liquid matrix.

Biomediated separation of kaolinite and hematite using Bacillus subtilis

Bacillus subtilis was used to demonstrate microbially induced selective flocculation to separate kaolinite and hematite. In neutral pH range of 7 - 8, 90 - 95% of hematite was selectively flocculated whereas 80 - 85% of kaolinite was dispersed using hematite - grown cells. Hematite-grown cells exhibited significant adsorption onto hematite than onto kaolinite, compared to unadapted cells. Kaolinite grown Bacillus subtilis secreted significant amounts of mineral specific proteins which conferred surface hydrophobicity whereas hematite-grown cells secreted more polysaccharides rendering hematite hydrophilic. Bacterial extracellular protein (EP) was isolated and the protein profiles of bacteria grown in the absence and presence of minerals were established.

Evaluating FuncSION: A software for automated synthesis of design solutions for stimulating ideation during mechanical conceptual design

The goal of the work reported in this paper is to use automated, combinatorial synthesis to generate alternative solutions to be used as stimuli by designers for ideation. FuncSION, a computational synthesis tool that can automatically synthesize solution concepts for mechanical devices by combining building blocks from a library, is used for this purpose. The objectives of FuncSION are to help generate a variety of functional requirements for a given problem and a variety of concepts to fulfill these functions. A distinctive feature of FuncSION is its focus on automated generation of spatial configurations, an aspect rarely addressed by other computational synthesis programs. This paper provides an overview of FuncSION in terms of representation of design problems, representation of building blocks, and rules with which building blocks are combined to generate concepts at three levels of abstraction: topological, spatial, and physical. The paper then provides a detailed account of evaluating FuncSION for its effectiveness in providing stimuli for enhanced ideation.

Non-uniform beams and stiff strings isospectral to axially loaded uniform beams and piano strings

In this paper, we derive analytical expressions for mass and stiffness functions of transversely vibrating clamped-clamped non-uniform beams under no axial loads, which are isospectral to a given uniform axially loaded beam. Examples of such axially loaded beams are beam columns (compressive axial load) and piano strings (tensile axial load). The Barcilon-Gottlieb transformation is invoked to transform the non-uniform beam equation into the axially loaded uniform beam equation. The coupled ODEs involved in this transformation are solved for two specific cases (pq (z) = k (0) and q = q (0)), and analytical solutions for mass and stiffness are obtained. Examples of beams having a rectangular cross section are shown as a practical application of the analysis. Some non-uniform beams are found whose frequencies are known exactly since uniform axially loaded beams with clamped ends have closed-form solutions. In addition, we show that the tension required in a stiff piano string with hinged ends can be adjusted by changing the mass and stiffness functions of a stiff string, retaining its natural frequencies.

Evaluación productiva de los pastos estrella (Cynodon nlemfuensis) y guinea (Panicum maximum),con y sin árboles, Managua

El presente trabajo tuvo como objetivos: Determinación de la composición botánica de la pastura con y sin árboles, así como evaluar la producción de biomasa fresca y seca de las especies forrajeras, en los intervalos de 0-35 y 0-25 días en la época seca, al igual que se determinará la relación que existe entre altura del fuste, área de la copa del árbol con respecto a la producción de biomasa de la pastura y por último sus beneficios económicos. El estudio se llevó a cabo en la finca las Mercedes, ubicada en el costado sur del matadero CARNIC, km. 10 1/2 de la carretera norte. Para determinar la composición botánica y producción de la biomasa forrajera así como su relación con los factores, se seleccionaron siete colonias de las cuales cinco eran de pasto Estrella, cuatro de los cuales poseían árboles y dos de pasto Guinea, de las cuales una poseían árboles. En las parcelas con árboles las mediciones se realizaron a tres distancias diferentes de la base del árbol, denominándosele distancia l, de 0-10 m de la base del árbol, distancia 2, de 10-20 m y la distancia 3, más de 20 m de la base del árbol. Para la realización de los análisis estadísticos se hizo uso de análisis de varianza para modelos lineales, a cada una de las variables dependientes, se le efectúo una prueba de rango múltiple de Duncan a las variables con significancia, además se realizó correlaciones entre colonia, intervalo, distancia, área de la copa y altura del fuste, con el objetivo de determinar cuál o cuáles son los que presentan mayor relación positiva o negativa con la producción de forraje. Los análisis estadísticos nos indican que no existe diferencia significativa entre colonia y distancias con respecto a la composición botánica. Por otra parte existen diferencias altamente significativas entre colonia, intervalo, distancias, con relación a la producción de biomasa fresca y seca, altura del pasto, cobertura efectiva y total. Las máximas producciones de forrajes son alcanzadas por las áreas forrajeras sin árbol, obteniendo la colonia uno de pasto estrella sin árbol una producción de 593.32 kg. MS/ha. y la colonia seis de pasto guinea sin árbol una producción de 226.68 kg. MS/ha. Con relación a los factores existe diferencia altamente significativa entre altura del fuste y diferencia significativa en área de la copa con respecto a la producción de biomasa fresca y seca. Las áreas de pasto sin árbol presentaron mejor rentabilidad con relación a las áreas de pasto con árbol

Impossibilità di pensare Dio non esistente : il Proslogion di Anselmo d'Aosta come applicazione implicita dei moderni procedimenti di logica aletica

Resumen: La vera intenzione teologica di Anselmo d’Aosta nello scrivere il Proslogion e il vero significato del suo celebre unum argumentum vanno visti nella funzione che la ragione svolge necessariamente all’interno della vita di fede del cristiano. Anselmo, come Tommaso d’Aquino, non sostiene che l’esistenza di Dio sia un “articulus fidei” ma piuttosto uno dei “praeambula fidei”. La ragione naturale ha la certezza che Dio esiste, ancora prima della dimostrazione metafisica, e questo non fa che confermare l’assurdità di pensare che non esista il fondamento reale di tutte le cose esistenti.

El tema del tiempo en la "Expositio in physicam" de Walter Burley

Resumen: El trabajo permite reconstruir el itinerario de la reacción inmediata del ultra realismo de Walter Burley frente a la crítica nominalista, tomando base en la teoría física y particularmente, en el tema del tiempo. Entendemos que el análisis comparativo de las doctrinas de Burley y de Ockham permitirá arrojar cierta luz sobre la historia de los primeros e importantes enfrentamientos al ockhamismo, procurando conformar una intelección nueva del siglo XIV donde Burley pasaría a ser un personaje de interés al motivar la reflexión de una figura como la de Ockham. Centramos nuestro análisis en torno a dos tópicos: aquel vinculado con la determinación del concepto de tiempo y su distinción del movimiento; y en segundo término, consideraremos el problema de la unicidad o pluralidad de tiempos. El trabajo propone tentativamente que ambos autores conocieron mutuamente sus doctrinas, se leyeron y corrigieron recíprocamente; y las profundas diferencias que conforman sus sistemas deben buscarse en una fundamentación gnoseo-ontológica diversa.

O outro e a transcendência : na parábola do Bom Samaritano (Lc 10, 25-37)

Resumen: Neste estudo, procuramos definir o sentido da corporeidade em Entralgo, relacionando-o com o pensamento de Lévinas. Segundo Entralgo, o corpo humano era um microcosmos integrado num cosmos. Assim, o corpo é i único objecto do Universo, do qual temos um duplo conhecimento não de fora, como também temos a sua percepção a partir de dentro. Porém, segundo Lévinas, a corporeidade é a expressão do Rosto do Outro, referindo- se como uma prefiguração do Outro, que tem o seu epílogo na parábola do Bom Samaritano. Há, na verdade, uma relação de aproximação antropológica entre o sentido do corpo como forma de manifestar o Outro. Em ti e por ti, tu eras uma pessoa, mas sendo tu uma pessoa, podendo e devendo Eu ver-te e tratar-te como tal pessoa. Os dois pensadores apresentam uma referência em relação à pessoas. Segundo Lévinas a pessoa será responsabilidade.