Influência do tipo de chanfro, tecimento e sentido de laminação na distorção angular em soldagem GMAW-P robotizada de alumínio

The industry's interest in having a greater control of the deformations caused by welding is due to the geometric and dimensional tolerances been more and more precise in the project specifications, motivating the manufacturing engineering to develop stable processes and to ensure routine production. Aiming at it, the main goal of this present work is to analyze how much routine situations used in automatic aluminum welding can influence on the angular deformations of this material. Using the alloy AA 5052 H34, and the automatic welding in pulsed GMAW process, three types of weaving were applied throughout the length of the weld, in butt joints assembled without groove and with 60 degrees single-V-groove, arranged transversely as well as longitudinally to the rolling direction of the plate. The measurement of the deformations was made by a three-dimensional equipment, before and after the welding, in three distinct regions in the specimens. The profile of the weld bead was the main factor for the different types of deformations found, as revealed by macrographical analysis. The 60 degrees single-V-groove had higher amplitudes of deformations as the joint without groove. The torch oscillation wasn't a variable of statistically significant influence on this amplitudes.

Biomass consumption and CO2, CO and main hydrocarbon gas emissions in an Amazonian forest clearing fire

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento da Tecnologia de Soldagem do Titânio pelo Processo TIG Orbital no Segmento Aeroespacial Brasileiro - Parte 2: Caracterização das Juntas Soldadas

In this work, three welding programs for orbital TIG previously developed were used, using pulsed current and increasing speed (M), constant current (#B) and pulsed current and decreasing current (#C). One of those should be used for the propulsion system of the satellite CBERS (CHINA-BRAZIL EARTH RESOURCES SATELLITE). Welded joints using tubes of commercially pure titanium were obtained with these procedures, which were characterized by means of mechanical and metallographic tests. The obtained results show that the three welding procedures produce welded joints free of defects and with adequate shape. Although small differences on mechanical properties and microstructure have been observed, the three welding programs attained compatible results with international standards used in the aerospace segment. The welding program #B, due the reduced heat input used, was considered to obtain slightly advantage over the others.

Investigação da Interface Metal-Porcelana da Liga Ni-Cr-Mo Soldada a LASER

The interface formed between the metal and the porcelain of a LASER welded Ni-Cr-Mo alloy was studied. The characterization was carried out through optical microscopy, scanning electron microscopy, X-ray dispersive spectroscopy-EDS and mechanical testing by three-point flexion test-TPE in the region LASER welded with and without the porcelain. The porcelain adhesion with the alloy alone is possible after the oxidation of the metallic surface and subsequent application of an adhesive called opaco. The applied porcelain, on the base metal and fusion zone presented some distinct behaviors. After the TPF test the base metal presented fractures while that in the fusion zone was completely gone. One noticed that the region submitted to the LASER welding showed less porcelain adhesion than the region of the base metal due to the microestructural refinement of the fusion zone. These results can be evidenced by the EDS of the studied regions. The TPF had demonstrated that the Ni-Cr-Mo alloy submitted to the LASER welding, undergone significant alterations in its mechanical properties after the application of the porcelain.

Estudo Comparativo de Juntas Soldadas a TIG e Laser Empregando-se Ti com Pureza Comercial Utilizado em Prótese sobre Implantes

Welding in the dentistry has been used for great part of the specialized dentist-surgeons in the implants area to solve prosthesis supported by implant adaptation problems. The development of new equipments Laser and TIG allowed a larger use of these processes in the prosthesis production. In this work, it was studied welded joints made by Laser and TIG, using commercial purity titanium, cpTi, applied in prosthesis supported by implants. The weld characterizations were carried out by light microscopy, EDS_elementary mapping, microhardness and tensile test. Through metallographic characterization, the weld bead presented a martensitic microstructure in the Laser welding process, originated from shear provoked by deformations in the lattice. This caused structural changes of the transformed area, which determines a fine plate-like morphology. In the weld bead from TIG, besides presenting higher hardness, was observed formation of Widmansttaten structure, which is characteristic of a geometric model, resulted of new phase formation along of the crystallographic plans. The martensitic structure is more refined than Widmansttaten structure, due to the high-speed cooling (10(3)degrees C/s) imposed by the Laser process.

Determination of critical velocity and anaerobic capacity of running rats

The aim of this study was to validate a non-invasive protocol to determine aerobic and anaerobic capacity of treadmill running rats. Thirteen male Wistar rats (90 days old) were submitted to 4 exercise tests, consisting of running at 25, 30, 35 and 40 m min-1, continuously until exhaustion. For the critical velocity (CV) and anaerobic running capacity (ARC) estimations, the hyperbolic curve (velocity versus time to exhaustion (tlim)) was linearized to V= CV+ARC/tlim, where the CV and ARC were linear and slope coefficients, respectively. In order to verify if the CV was the maximal aerobic intensity, the rats were submitted to the maximal lactate steady state test (MLSS) composed of three 25-minute tests of continuous running trials at 15, 20 and 25 m min-1, with blood collection every 5 minutes. The CV was obtained at 22.8±0.7 m min-1 and the ARC, at 26.80±2.77 m. The MLSS was observed at 20m min-1, with blood lactate 3.84 ± 0.31 mmol L-1. There was a progressive increase in lactate concentration at 25 m min-1. The CV and MLSS were different, but presented a high and significant correlation (r=0.81). These results indicate that the non-invasive protocol can be used for physical evaluation of aerobic running rats, but the ARC should still be further investigated.

Utilização de água residuária do processo pós-colheita do café na produção de mudas de cafeeiro

Intending to achieve better results on coffee production, the coffee producers began, since the 80s, to process the coffee postharvest, in order to ensure product's superior quality. However, with the processing, other problem appeared, the contamination of rivers, creeks, soil and water table from coffee wastewater (ARC). This paper had as main objective to use the ARC on the coffee plants' production verifying its viability and if the ARC is able to supply the coffee potassium requirements when they don't receive potassium chloride in the organic compound. The work was developed at Faculdade de Ciências Agronômicas - UNESP, Botucatu-SP, in a greenhouse located at Departamento de Engenharia Rural. The work consisted of 10 treatments on a 5×2 factorial (5 wastewater proportions of coffee after the harvest processing - 0%, 25%, 50%, 75% and 100% - and potassium chloride presence or absence in the composition), with 4 repetitions with a completely randomized statistical design. The ARC was applied each 48 hours in an irrigation depth of 10 mm. After 6 months, the plants' vegetative characteristic had been evaluated as well the chemical characteristics of the compound and of the plants. We observed that the treatments with potassium chloride presence showed worse vegetative characteristics compared with treatments which did not have KCl in its composition. Moreover, with the increase of the wastewater dosage, it happened a decrease in the vegetative characteristics, however an addition in the chemical characteristics of the compound. Also, the treatments without KCl presence and with 0% and 25% of coffee wastewater had been statistically equal, showing the viability in the use of the ARC in the production of coffee plants, since the compound does not contain KCl and that the water used in the composition is a mixture of 25% of ARC with 75% of common water.

Utilização de água residuária do processo pós-colheita do café na produção de mudas de cafeeiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização mecânica e microestrutural de juntas de alumínio 6013 T4 soldados a laser

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do condicionamento ambiental em compósitos soldados de PPS/fibras contínuas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência da atmosfera protetora no cordão de solda obtido através dos processos de soldagem GMAW e FCAW

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Soldagem GMAW-P robotizada de alumínio: influência do tipo de chanfro, tecimento e sentido de laminação na distorção

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito de genótipos de feijoeiro, óleo de nim em diferentes formulações e período residual no controle de Zabrotes subfasciatus (Boheman, 1833)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A influência do Arco do Desmatamento sobre o ciclo hidrológico da Amazônia

Este trabalho buscou quantificar algumas alterações no ciclo hidrológico da Amazônia propiciadas pelo desmatamento da região, principalmente devido à faixa conhecida como "Arco do Desmatamento". Neste sentido, foram realizados experimentos numéricos utilizando o modelo BRAMS (Brazilian Regional Atmospheric Modeling System) tendo o submodelo de vegetação dinâmica GEMTM (General Energy and Mass Transport Model) a ele acoplado. Foram investigados os impactos causados pelo Arco do Desmatamento atual em relação à floresta intacta, bem como as futuras modificações, causados pelo avanço do desmatamento até o ano de 2050. Como condições de contorno na superfície para o modelo BRAMS, foram usados cenários oriundos de modelos empíricos de desmatamento para os anos de 2002 e 2050. Os resultados mostraram que o avanço do Arco do Desmatamento até 2050 tem uma complexa relação com as variáveis analisadas. Por exemplo, a precipitação apresentou distribuição espacial heterogênea, com áreas de anomalias positivas e negativas que se mostraram coerentes com as anomalias de outras variáveis, como a evapotranspiração e a divergência de umidade. Também foram encontradas algumas áreas que evidenciaram as possíveis influências dos grandes rios e topografia da região sobre essa precipitação. Os balanços de radiação e energia também foram afetados pelo desmatamento, sendo que grande parte das alterações é devido à mudança do albedo da superfície, a qual ocorre com a substituição da floresta pela pastagem. Quanto às alterações propiciadas pelo Arco do Desmatamento atual em relação à floresta intacta, foi observado que todas as variáveis foram afetadas, entretanto a maioria dos impactos ainda é localizada sobre a área mais afetada pelo desmatamento, diferentemente dos resultados encontrados para o cenário de 2050, onde as modificações já se dão a nível regional.

Determinação da resistência à flexão de ligas odontológicas, utilizadas em prótese parcial fixa e prótese sobre implante, soldadas por brasagem e a laser

Pós-graduação em Odontologia Restauradora - ICT