Atributos químicos de um latossolo vermelho sob diferentes sistemas de preparo, adubações e plantas de cobertura

Os sistemas de preparo do solo e tipos de adubações levam à disposição diferenciada dos elementos minerais no perfil do solo, influenciando os seus atributos químicos. O objetivo deste trabalho foi verificar as alterações de alguns atributos químicos de um Latossolo Vermelho de cerrado, sob as adubações orgânica e mineral e plantas de cobertura, estabelecidas nos sistemas de semeadura direta e preparo convencional, sendo cultivado com feijão de inverno e algodão. O delineamento experimental utilizado foi em blocos casualizados com parcelas subdivididas. Nas parcelas foram instalados dois tratamentos (semeadura direta e preparo convencional) e, nas subparcelas, seis (esterco de galinha, esterco de galinha + metade da adubação mineral recomendada, adubação mineral, crotalária, milheto e testemunha). Foram avaliados P, MO, pH, K+, Ca2+, Mg2+, H + Al, Al3+, SB, CTCe e V nas camadas de solo de 0,00-0,10 e 0,10-0,20 m. O uso do adubo orgânico isolado ou associado com adubação mineral contribuiu para os melhores resultados dos atributos químicos do solo avaliados; as plantas de cobertura apresentaram-se semelhantes quanto aos efeitos nas propriedades químicas do solo; e a distribuição dos elementos minerais na camada superficial do solo (0,00-0,20 m) teve comportamento semelhante entre a semeadura direta e o preparo convencional.

Monitoramento ambiental da costa do Rio Grande do Norte com base em sensoriamento remoto e geodésia de precisão

This paper presents models of parameters of Sea Surface Layer (SSL), such as chlorophyll-a, sea surface temperature (SST), Primary Productivity (PP) and Total Suspended Matter (TSM) for the region adjacent to the continental shelf of Rio Grande do Norte (RN), Brazil. Concentrations of these parameters measured in situ were compared in time quasi-synchronous with images AQUA-MODIS between the years 2003 to 2011. Determination coefficients between samples in situ and bands reflectance sensor AQUA-MODIS were representative. From that, concentrations of SSL parameters were acquired for the continental shelf of the RN (eastern and northern) analyzing the geographic distribution of variation of these parameters between the years 2009-2012. Geographical and seasonal variations mainly influenced by global climate phenomena such as El Niño and La Niña, were found through the analysis of AQUA-MODIS images by Principal Components Analysis (PCA). Images show qualitatively the variance and availability of TSM in the regions, as well as their relationship with coastal erosion hotspots, monitored along the coast of the RN. In one of the areas identified as being of limited availability of TSM, we developed a methodology for assessment and evaluation of Digital Elevation Models (DEM) of beach surfaces (emerged and submerged sections) from the integration of topographic and bathymetric data measured in situ and accurately georeferenced compatible to studies of geomorphology and coastal dynamics of short duration. The methodology consisted of surveys with GNSS positioning operated in cinematic relative mode involved in topographic and bathymetric executed in relation to the stations of the geodetic network of the study area, which provided geodetic link to the Brazilian Geodetic System (GBS), univocal , fixed, and relatively stable over time. In this study Ponta Negra Beach, Natal / RN, was identified as a region with low variance and availability of MPS in the region off, as characterized by intense human occupation and intense coastal erosion in recent decades, which presents potential of the proposed methodology for accuracy and productivity, and the progress achieved in relation to the classical methods of surveying beach profiles

Morphological characterization of rat incisor fluorotic lesions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical behaviour of heat-treated Al-Zn-Mg alloys in chloride solutions containing sulphate

The electrochemical corrosion and passivation of Al-5Zn-1.7Mg-0.23Cu-0.053Nb alloys, submitted to different heat treatments (cold-rolled, annealed, quenched and aged, and quenched in two steps and aged), in sulphate-containing chloride solutions, has been studied by means of cyclic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS). The cyclic polarization curves showed that sulphate addition to the chloride solution produced a poor reproducible shift of the breakdown potential to more positive potentials. The repassivation potentials, much more reproducible, and practically separating the passive from the pitting potential region, were slightly displaced in the negative direction with that addition. When the alloys were potentiodynamically polarized in the passive potential region, sulphate was incorporated in the oxide film, thus precluding chloride ingress. In addition, Zn depletion was favoured, whereas Mg losses were avoided. Different equivalent circuits corresponding to different alloys and potentials in the passive and pitting regions were employed to account for the electrochemical processes taking place in each condition. This work shows that sulphate makes these alloys more sensitive to corrosion, increasing the fracture properties of the surface layer and favouring the pitting attack over greater areas than chloride alone. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Influência do preparo inicial sobre a estrutura do solo quando da adoção do sistema plantio direto, avaliada por meio da pressão de preconsolidação

Os efeitos do tráfego e do tipo de preparo sobre a estrutura dos solos agrícolas, quando da adoção do sistema plantio direto na região dos Cerrados, têm sido pouco pesquisados. Os estudos desenvolvidos são apenas qualitativos e utilizam-se, geralmente, de propriedades, tais como: a densidade do solo e a resistência do solo à penetração, as quais não possibilitam predizer quanto de pressão o solo pode receber de forma que, em manejos futuros, a compactação possa ser evitada. Este trabalho teve como objetivo avaliar a influência do preparo inicial do solo quando da adoção do sistema plantio direto sobre a estrutura de um Latossolo Vermelho distrófico por meio da pressão de preconsolidação (sigmap). Os valores de sigmap foram obtidos a partir da elaboração de modelos de compressibilidade, os quais consideraram a influência dos seguintes fatores: (1) preparo inicial do solo: arado de aivecas (AA), arado de discos (AD), grade aradora (GA) e vibrosubsolador (VS); (2) manejo: sistema plantio convencional (PC), o qual foi utilizado como testemunha para avaliar a influência dos preparos e (3) profundidade: superficial (SP - 0,00 a 0,05 m) e profundidade média de trabalho dos implementos (PMT- 0,24 a 0,27 m). Os resultados evidenciaram que a sigmap mostrou-se eficiente na avaliação da influência do preparo inicial sobre a estrutura do solo quando da instalação do sistema plantio direto no Latossolo Vermelho distrófico, tendo o seu valor variado entre preparos e profundidades estudados. A sigmap evidenciou maior resistência mecânica e, portanto, maior consolidação da estrutura do solo na profundidade SP dos tratamentos da área sob plantio direto. Verificou-se, também, que os preparos iniciais avaliados reduziram a resistência mecânica do solo na profundidade PMT, quando comparados à do sistema plantio convencional. Todavia, são o vibrosubsolador e o arado de discos os implementos recomendados para alívio dessa resistência, isto é, para a melhoria da estrutura do solo nas profundidades SP e PMT, respectivamente, quando da adoção do sistema plantio direto.

Determinação de fósforo microbiano: comparação entre métodos e coberturas florestais

Muitos trabalhos mostram a importância da biomassa microbiana do solo (BMS), principalmente como fonte/dreno de C e de N em plantações florestais; contudo, são escassos os trabalhos relacionados ao fósforo microbiano (PBM), sobretudo aqueles relativos aos métodos de determinação do PBM nesses ecossistemas. O presente trabalho foi realizado com o objetivo de avaliar métodos de determinação do PBM em solo com diferentes coberturas vegetais. O trabalho consistiu da análise de amostras de Latossolo Vermelho-Amarelo distrófico muito argiloso (LVAd) localizado no município de Viçosa (MG), coletadas nas profundidades de 0 a 5 e 5 a 10 cm, em áreas com as seguintes coberturas vegetais: pínus (Pinus taeda), eucalipto (Eucalyptus grandis) e floresta nativa. Para determinação do P microbiano, foram empregados os métodos fumigação-extração (FE), irradiação com micro-ondas-extração (IE) e irradiação com micro-ondas-extração com membrana de troca aniônica (EMTA). em termos gerais, menores teores de PBM foram obtidos com o método irradiação-extração. Considerando a cobertura vegetal, foi detectada diferença significativa entre os três métodos sob floresta de eucalipto e floresta nativa, principalmente na camada superficial. Sob pínus, apenas o método IE diferiu dos demais, na camada subsuperficial. Menores coeficientes de variação (CV) foram obtidos com o FE, retratando maior precisão do método. Entretanto, o método IE mostrou-se, em termos operacionais, o mais adequado à determinação do PBM quando se tem maior número de amostras. Com relação às coberturas vegetais, a grande variabilidade observada nos CVs obtidos para cada cobertura, nos três métodos testados, inviabiliza a escolha de um único método que apresente maior precisão na avaliação do PBM.

Potencial de lixiviação de herbicidas utilizados na cultura do algodão em colunas de solo

O intenso uso de herbicidas implica a necessidade de determinar o potencial dessas substâncias em contaminar fontes aquáticas subsuperficiais. Diante dessa preocupação, o objetivo deste trabalho foi avaliar o efeito de diferentes lâminas de água sobre o potencial de lixiviação de quatro herbicidas utilizados em pré-emergência na cultura do algodão, em dois solos provenientes de Campo Novo do Parecis-MT (RQ - textura arenosa) e Tangará da Serra-MT (LV - textura argilosa). No desenvolvimento deste trabalho utilizouse a técnica de bioensaio em colunas de solo, nas quais foram simuladas irrigações de 0, 20, 40, 60, 80 e 100 mm, após a aplicação de alachlor (RQ 2,40; LV 3,36 kg ha-1), oxyfluorfen (RQ 0,48; LV 0,72 kg ha-1), prometryne (RQ 0,75; LV 1,50 kg ha-1) e S-metolachlor (RQ 1,20; LV 1,44 kg ha-1). Nas amostras de solo com textura arenosa (RQ), evidenciou-se que lâminas de 80 e 100 mm de água proporcionaram lixiviação até a profundidade de 10-15 cm do alachlor e até 15-20 cm do S-metolachlor. Independentemente da lâmina de água aplicada, nas amostras de RQ oxyfluorfen não ultrapassou a camada de 5-10 cm, e o prometryne movimentou-se até a camada de 10-15 cm somente na lâmina de 100 mm de água. Nas amostras de solo com textura argilosa (LV), o oxyfluorfen não se movimentou além da camada superficial, mesmo sob as maiores lâminas de irrigação, e o prometryne atingiu 5-10 cm de profundidade sob lâminas de 80 e 100 mm. Os herbicidas alachlor e S-metolachlor atingiram 10-15 cm de profundidade sob lâminas de 80 e 100 mm no LV. Evidenciou-se uma maior movimentação efetiva das moléculas de herbicidas nas amostras de solo com textura arenosa (RQ), em relação às amostras de solo com textura argilosa (LV).

Magnetic properties of acicular ultrafine iron particles

Magnetic properties of acicular (similar to60 and similar to200 nm) iron particles, obtained by reduction of alumina-coated goethite particles, are reported. X-ray diffraction and Mossbauer spectroscopy showed that the particles consist of a alpha-Fe core and a thin surface layer of maghemite. Magnetization data indicated an improvement of similar to28% in the saturation magnetization, coercive field, and squareness for particles with similar to60 nm. This magnetic property enhancement of the present particles, whose size is 40% smaller than those commercially available, could result in a similar decrease of the bit-size for higher density of magnetic media.

Electrochemical stability of anodic titanium oxide films grown at potentials higher than 3 V in a simulated physiological solution

The cathodic behaviour of oxides formed on titanium electrodes in physiological solutions at potentials between 3 and 5 V (vs. SCE) was studied by cyclic voltammetry. In case of anodic polarization at potentials higher than 3 V (vs. SCE), a cathodic peak at similar to 0.4 V (vs. SCE) appears in the cathodic scan, which could be due to the reduction of unstable peroxides. The results show that this peak depends on the anodic potential and the oxidation time. This behaviour supposedly is due to the formation of unstable titanium peroxides like TiO3 during anodization. Based on repetitive oxidation-reduction processes can be concluded that the created amount of TiO3 inside of the TiO2 surface layer seems to be constant. (c) 2006 Elsevier Ltd. All rights reserved.

Electrochemical studies with a Cu-5wt.%Ni alloy in 0.5 M H2SO4

The electrochemical behavior of the annealed Cu-5wt.%Ni alloy in 0.5 M H2SO4 was studied by means of open-circuit potential (E-OCP) measurements, cyclic voltammetry, electrochemical impedance spectroscopy (EIS), and quasi-stationary linear potential sweep. The hydrodynamics of the system was also studied. This material is constituted by a single a, phase. The anodic behavior of a Cu-Ni alloy in H2SO4 consists fundamentally on the electrodissolution of Cu, its main component, and the formation of a sulfur-containing passive layer. The presence of Ni decreases the rate of Cu oxidation, mostly at high positive potentials. The impedance spectra, obtained for the unrotating electrode, can be interpreted in terms of a simple charge-transfer reaction across a surface layer. When the electrode is rotated, the occurrence of an inductive loop evidenced the existence of an adsorbed layer. All the resistance estimated from the proposed equivalent circuits diminished with the electrode rotation rate, emphasizing the influence of ion transport in the overall electrode process. The system presented two anodic Tafel slopes: 40 mV dec(-1) for E < 255 mV and 67 mV dec(-1) for E > 275 mV. A Tafel slope of 40 mV dec(-1) evidences that copper dissolution can be interpreted in terms of the mechanism proposed by Mattsson and Bockris. The second Tafel suggests that at potentials more positive than 275 mV, copper dissolves according to a mechanism that considers the disproportionation of adsorbed Cu(1) species. (C) 2003 Elsevier Ltd. All rights reserved.

Photo-induced effects in Ge25Ga10S65 glasses studied by XPS and XAS

The present paper focuses on the structural, electronic, and compositional properties of Ge25Ga10S65 glasses before and after UV illumination in air using X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) techniques. The XPS Ge 3d spectra reveal the existence of Ge-O bonds in the surface region of illuminated glass. In the case of this sample, XAS O K-edge spectra showed the formation of an enriched region of oxygen atoms in the glass bulk, indicating a different bonding structure of oxygen at the surface and in the bulk of the glass. Moreover, the structural changes that occur after UV illumination in the glass sample are identified as the formation of a homogeneous germanium oxide surface layer followed by an intermediary Ge25Ga10S65-yOz subsurface region. (c) 2005 Elsevier B.V. All rights reserved.

Microstructural and morphological analysis of pure and Ce-doped tin dioxide nanoparticles

Structural morphological studies in pure and Ce-doped tin dioxide nanoparticles with high stability against particle growth were performed in samples, obtained using the polymeric precursor method and prepared at different annealing temperatures. A Ce-rich surface layer was used to control the particle size and stabilize SnO2 against particle growth. The formation of this segregated layer can contribute to a decreased surface energy, acting in the driving force, or reducing the surface mobility. Only the cassiterite SnO2 phase was observed below 1000 degreesC and a secondary phase (CeO2) was observed for the Ce-doped SnO2 at temperatures higher than 1000 degreesC, when de-mixing process occurs. The evolution of crystallite size, microstrain and morphology of the nanoparticles with annealing temperatures was investigated by X-ray diffraction (XRD), associated to Rietveld refinements, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Decomposition of the rubber tree Hevea brasiliensis litter at two depths

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Atributos físicos do solo e produtividade do milho sob sistemas de manejo e adubações

No-tillage system is an efficient technique in control of soil erosion, when compared with conventional tillage, however, some studies indicate higher compaction under no-tillage, mainly in the surface layer. Strategies that increase the organic matter content, as crop rotation and organic fertilization, can be used to solve the soil compaction. The aim of this study was to evaluate the effect of soil managements (crop succession and crop rotation) and fertilization (organic, mineral and organic-mineral) in the physical properties of the soil, under no-tillage system, from 2006 to 2008. The evaluations were carried out in February 2007, after the summer corn harvest, and in September 2008, after the winter corn harvest. Crop rotation decreased the soil density and soil resistance to penetration and increased the macroporosity and total porosity. The use of organic sources of fertilization did not affect any of the physical attributes of soil. The yield of summer corn was highest in succession crop and mineral fertilization, however, in the winter, there was no difference between the soil managements and among the fertilizations.

Soil microbial biomass and organic matter fractions during transition from conventional to organic farming systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)