Memristive Computing

Memristive computing refers to the utilization of the memristor, the fourth fundamental passive circuit element, in computational tasks. The existence of the memristor was theoretically predicted in 1971 by Leon O. Chua, but experimentally validated only in 2008 by HP Labs. A memristor is essentially a nonvolatile nanoscale programmable resistor — indeed, memory resistor — whose resistance, or memristance to be precise, is changed by applying a voltage across, or current through, the device. Memristive computing is a new area of research, and many of its fundamental questions still remain open. For example, it is yet unclear which applications would benefit the most from the inherent nonlinear dynamics of memristors. In any case, these dynamics should be exploited to allow memristors to perform computation in a natural way instead of attempting to emulate existing technologies such as CMOS logic. Examples of such methods of computation presented in this thesis are memristive stateful logic operations, memristive multiplication based on the translinear principle, and the exploitation of nonlinear dynamics to construct chaotic memristive circuits. This thesis considers memristive computing at various levels of abstraction. The first part of the thesis analyses the physical properties and the current-voltage behaviour of a single device. The middle part presents memristor programming methods, and describes microcircuits for logic and analog operations. The final chapters discuss memristive computing in largescale applications. In particular, cellular neural networks, and associative memory architectures are proposed as applications that significantly benefit from memristive implementation. The work presents several new results on memristor modeling and programming, memristive logic, analog arithmetic operations on memristors, and applications of memristors. The main conclusion of this thesis is that memristive computing will be advantageous in large-scale, highly parallel mixed-mode processing architectures. This can be justified by the following two arguments. First, since processing can be performed directly within memristive memory architectures, the required circuitry, processing time, and possibly also power consumption can be reduced compared to a conventional CMOS implementation. Second, intrachip communication can be naturally implemented by a memristive crossbar structure.

Application of a Pid+fuzzy controller on the motion control system in machine tools

This work deals with an hybrid PID+fuzzy logic controller applied to control the machine tool biaxial table motions. The non-linear model includes backlash and the axis elasticity. Two PID controllers do the primary table control. A third PID+fuzzy controller has a cross coupled structure whose function is to minimise the trajectory contour errors. Once with the three PID controllers tuned, the system is simulated with and without the third controller. The responses results are plotted and compared to analyse the effectiveness of this hybrid controller over the system. They show that the proposed methodology reduces the contour error in a proportion of 70:1.

Speed Control of an Autonomous Mobile Robot: Comparison between a PID Control and a Control Using Fuzzy Logic

An Autonomous Mobile Robot battery driven, with two traction wheels and a steering wheel is being developed. This Robot central control is regulated by an IPC, which controls every function of security, steering, positioning localization and driving. Each traction wheel is operated by a DC motor with independent control system. This system is made up of a chopper, an encoder and a microcomputer. The IPC transmits the velocity values and acceleration ramp references to the PIC microcontrollers. As each traction wheel control is independent, it's possible to obtain different speed values for each wheel. This process facilities the direction and drive changes. Two different strategies for speed velocity control were implemented; one works with PID, and the other with fuzzy logic. There were no changes in circuits and feedback control, except for the PIC microcontroller software. Comparing the two different speed control strategies the results were equivalent. However, in relation to the development and implementation of these strategies, the difficulties were bigger to implement the PID control.

Simulation of Active Control Using Fuzzy Logic Applied to a Pulse Combustor

This work analyzes an active fuzzy logic control system in a Rijke type pulse combustor. During the system development, a study of the existing types of control for pulse combustion was carried out and a simulation model was implemented to be used with the package Matlab and Simulink. Blocks which were not available in the simulator library were developed. A fuzzy controller was developed and its membership functions and inference rules were established. The obtained simulation showed that fuzzy logic is viable in the control of combustion instabilities. The obtained results indicated that the control system responded to pulses in an efficient and desirable way. It was verified that the system needed approximately 0.2 s to increase the tube internal pressure from 30 to 90 mbar, with an assumed total delay of 2 ms. The effects of delay variation were studied. Convergence was always obtained and general performance was not affected by the delay. The controller sends a pressure signal in phase with the Rijke tube internal pressure signal, through the speakers, when an increase the oscillations pressure amplitude is desired. On the other hand, when a decrease of the tube internal pressure amplitude is desired, the controller sends a signal 180º out of phase.

Experimental study applied to an industrial robot by using variable structure controllers and friction compensation

Control of an industrial robot is mainly a problem of dynamics. It includes non-linearities, uncertainties and external perturbations that should be considered in the design of control laws. In this work, two control strategies based on variable structure controllers (VSC) and a PD control algorithm are compared in relation to the tracking errors considering friction. The controller's performances are evaluated by adding an static friction model. Simulations and experimental results show it is possible to diminish tracking errors by using a model based friction compensation scheme. A SCARA robot is used to illustrate the conclusions of this paper.

Professionalization of controllers in Finland

Professions are a special category of occupations that possesses exclusive rights over its domain of expertise. Professions apply expert knowledge in their work by using professional discretion and judgment to solve their clients’ problems. With control over their expert knowledge base, professions are able to control the supply of practitioners in their field and regulate the practice in their market. Professionalization is the process during which occupations attempt to gain the status of a profession. The benefits of becoming a profession are extensive – professional autonomy, social and financial rewards, prestige, status, and an exclusive community are only a few of the privileges that established professions possess. Many aspiring occupations have tried and failed to gain the status of a profession and one of these groups is the occupation of controllers in Finland. The objective of this study to uncover, why controllers have not professionalized, which properties of the occupation correspond with the elements generally regarded to pertain to professions, and which aspects of the occupational group may hinder the professionalization project. The professionalization project of controllers is analyzed using a multi-actor model of professionalization, in which practitioners, clients, the state, training institutions, and employing organizations are considered to affect the project. The properties of the occupation of controllers are compared to features generally associated with professions. The research methodology for this thesis is qualitative, and the study is conducted as an exploratory research. The data is primarily gathered using semi-structured interviews, which were conducted between March and May 2013 lasting from 40 minutes to an hour. In total, four controllers were interviewed, who worked for different companies operating in different industries, and whose experience of working as a controller varied between a few years to nearly 15 years. The data in this study indicates that although controllers possess qualities that distinguish professions from other occupational groups, the professionalization of controllers may not be plausible. Controllers enjoy considerable autonomy in organizations, and they possess a strong orientation towards serving their clients. The more profound problem with the occupation is its non-exclusive, indistinct knowledge base that does not rely solely on a single knowledge base. Controllers’ expertise is relatively organization-specific and built on several different fields of knowledge and not just management accounting, which could be considered as their primary knowledge base. In addition, controllers have not organized themselves, which is a quintessential, but by no means a sufficient prerequisite for professionalization.

Underwater Remote Welding Technology for Offshore Structures

The construction of offshore structures, equipment and devices requires a high level of mechanical reliability in terms of strength, toughness and ductility. One major site for mechanical failure, the weld joint region, needs particularly careful examination, and weld joint quality has become a major focus of research in recent times. Underwater welding carried out offshore faces specific challenges affecting the mechanical reliability of constructions completed underwater. The focus of this thesis is on improvement of weld quality of underwater welding using control theory. This research work identifies ways of optimizing the welding process parameters of flux cored arc welding (FCAW) during underwater welding so as to achieve desired weld bead geometry when welding in a water environment. The weld bead geometry has no known linear relationship with the welding process parameters, which makes it difficult to determine a satisfactory weld quality. However, good weld bead geometry is achievable by controlling the welding process parameters. The doctoral dissertation comprises two sections. The first part introduces the topic of the research, discusses the mechanisms of underwater welding and examines the effect of the water environment on the weld quality of wet welding. The second part comprises four research papers examining different aspects of underwater wet welding and its control and optimization. Issues considered include the effects of welding process parameters on weld bead geometry, optimization of FCAW process parameters, and design of a control system for the purpose of achieving a desired bead geometry that can ensure a high level of mechanical reliability in welded joints of offshore structures. Artificial neural network systems and a fuzzy logic controller, which are incorporated in the control system design, and a hybrid of fuzzy and PID controllers are the major control dynamics used. This study contributes to knowledge of possible solutions for achieving similar high weld quality in underwater wet welding as found with welding in air. The study shows that carefully selected steels with very low carbon equivalent and proper control of the welding process parameters are essential in achieving good weld quality. The study provides a platform for further research in underwater welding. It promotes increased awareness of the need to improve the quality of underwater welding for offshore industries and thus minimize the risk of structural defects resulting from poor weld quality.

Classificações de signos de C.S.Peirce: de ‘On the Logic of Science’ ao ‘Syllabus of Certain Topics of Logic’

As classificações dos signos de C.S.Peirce começam a ser desenvolvidas em 1865 e se estendem a até, pelo menos, 1909. Vou apresentar o período que tem início em 1865, e possui dois momentos de intensa produção - "On a New List of Categories" e "On the Algebra of Logic: a contribution to the philosophy of notation". Em seguida apresento as dez classes de signos, uma morfologia que aparece no "Syllabus of Certain Topics of Logic", e é desenvolvida a partir de 1903. Meu propósito aqui é familiarizar o leitor com as intrincadas classificações sígnicas de Peirce.

Mental Logic and the Denials of Conjunctions and Disjunctions

ABSTRACT: The mental models theory predicts that, while conjunctions are easier than disjunctions for individuals, when denied, conjunctions are harder than disjunctions. Khemlani, Orenes, and Johnson-Laird proved that this prediction is correct in their work of 2014. In this paper, I analyze their results in order to check whether or not they really affect the mental logic theory. My conclusion is that, although Khemlani et al.'s study provides important findings, such findings do not necessarily lead to questioning or to rejecting the mental logic theory.

Nietzsche's eternal recurrence of the same : the effect of logic abridgement, contradictions and inconsistencies

I will argue that the doctrine of eternal recurrence of the same no better interprets cosmology than pink elephants interpret zoology. I will also argue that the eternal-reiurn-of-the-same doctrine as what Magnus calls "existential imperative" is without possibility of application and thus futile. To facilitate those arguments, the validity of the doctrine of the eternal recurrence of the same will be tested under distinct rubrics. Although each rubric will stand alone, one per chapter, as an evaluation of some specific aspect of eternal recurrence, the rubric sequence has been selected to accommodate the identification of what I shall be calling logic abridgments. The conclusions to be extracted from each rubric are grouped under the heading CONCLUSION and appear immediately following rubric ten. Then, or if, at the end of a rubric a reader is inclined to wonder which rubric or topic is next, and why, the answer can be found at the top of the following page. The question is usually answered in the very first sentence, but always answered in the first paragraph. The first rubric has been placed in order by chronological entitlement in that it deals with the evolution of the idea of eternal recurrence from the time of the ancient Greeks to Nietzsche's August, 1881 inspiration. This much-recommended technique is also known as starting at the beginning. Rubric 1 also deals with 20th. Century philosophers' assessments of the relationship between Nietzsche and ancient Greek thought. The only experience of E-R, Zarathustra's mountain vision, is second only because it sets the scene alluded to in following rubrics. The third rubric explores .ii?.ih T jc,i -I'w Nietzsche's evaluation of rationality so that his thought processes will be understood appropriately. The actual mechanism of E-R is tested in rubric four...The scientific proof Nietzsche assembled in support of E-R is assessed by contemporary philosophers in rubric five. E-R's function as an ethical imperative is debated in rubrics six and seven.. .The extent to which E-R fulfills its purpose in overcoming nihilism is measured against the comfort assured by major world religions in rubric eight. Whether E-R also serves as a redemption for revenge is questioned in rubric nine. Rubric ten assures that E-R refers to return of the identically same and not merely the similar. In addition to assemblage and evaluation of all ten rubrics, at the end of each rubric a brief recapitulation of its principal points concludes the chapter. In this essay I will assess the theoretical conditions under which the doctrine cannot be applicable and will show what contradictions and inconsistencies follow if the doctrine is taken to be operable. Harold Alderman in his book Nietzsche's Gift wrote, the "doctrine of eternal recurrence gives us a problem not in Platonic cosmology, but in Socratic selfreflection." ^ I will illustrate that the recurrence doctrine's cosmogony is unworkable and that if it were workable, it would negate self-reflection on the grounds that selfreflection cannot find its cause in eternal recurrence of the same. Thus, when the cosmology is shown to be impossible, any expected ensuing results or benefits will be rendered also impossible. The so-called "heaviest burden" will be exposed as complex, engrossing "what if speculations deserving no linkings to reality. To identify ^Alderman p. 84 abridgments of logic, contradictions and inconsistencies in Nietzsche's doctrine of eternal recurrence of the same, I. will examine the subject under the following schedule. In Chapter 1 the ancient origins of recurrence theories will be introduced. ..This chapter is intended to establish the boundaries within which the subsequent chapters, except Chapter 10, will be confined. Chapter 2, Zarathustra's vision of E-R, assesses the sections of Thus Spoke Zarathustra in which the phenomenon of recurrence of the same is reported. ..Nihilism as a psychological difficulty is introduced in this rubric, but that subject will be studied in detail in Chapter 8. In Chapter 2 the symbols of eternal recurrence of the same will be considered. Whether the recurrence image should be of a closed ring or as a coil will be of significance in many sections of my essay. I will argue that neither symbolic configuration can accommodate Nietzsche's supposed intention. Chapter 3 defends the description of E-R given by Zarathustra. Chapter 4, the cosmological mechanics of E-R, speculates on the seriousness with which Nietzsche might have intended the doctrine of eternal recurrence to be taken. My essay reports, and then assesses, the argument of those who suppose the doctrine to have been merely exploratory musings by Nietzsche on cosmological hypotheses...The cosmogony of E-R is examined. In Chapter 5, cosmological proofs tested, the proofs for Nietzsche's doctrine of return of the same are evaluated. This chapter features the position taken by Martin ' Heidegger. My essay suggests that while Heidegger's argument that recurrence of the same is a genuine cosmic agenda is admirable, it is not at all persuasive. Chapter 6, E-R is an ethical imperative, is in essence the reporting of a debate between two scholars regarding the possibility of an imperative in the doctrine of recurrence. Their debate polarizes the arguments I intend to develop. Chapter 7, does E-R of the same preclude alteration of attitudes, is a continuation of the debate presented in Chapter 6 with the focus shifted to the psychological from the cosmological aspects of eternal recurrence of the same. Chapter 8, Can E-R Overcome Nihilism?, is divided into two parts. In the first, nihilism as it applies to Nietzsche's theory is discussed. ..In part 2, the broader consequences, sources and definitions of nihilism are outlined. My essay argues that Nietzsche's doctrine is more nihilistic than are the world's major religions. Chapter 9, Is E-R a redemption for revenge?, examines the suggestion extracted from Thus Spoke Zarathustra that the doctrine of eternal recurrence is intended, among other purposes, as a redemption for mankind from the destructiveness of revenge. Chapter 10, E-R of the similar refuted, analyses a position that an element of chance can influence the doctrine of recurrence. This view appears to allow, not for recurrence of the same, but recurrence of the similar. A summary will recount briefly the various significant logic abridgments, contradictions, and inconsistencies associated with Nietzsche's doctrine of eternal recurrence of the same. In the 'conclusion' section of my essay my own opinions and observations will be assembled from the body of the essay.

Extending relAPS to first order logic

RelAPS is an interactive system assisting in proving relation-algebraic theorems. The aim of the system is to provide an environment where a user can perform a relation-algebraic proof similar to doing it using pencil and paper. The previous version of RelAPS accepts only Horn-formulas. To extend the system to first order logic, we have defined and implemented a new language based on theory of allegories as well as a new calculus. The language has two different kinds of terms; object terms and relational terms, where object terms are built from object constant symbols and object variables, and relational terms from typed relational constant symbols, typed relational variables, typed operation symbols and the regular operations available in any allegory. The calculus is a mixture of natural deduction and the sequent calculus. It is formulated in a sequent style but with exactly one formula on the right-hand side. We have shown soundness and completeness of this new logic which verifies that the underlying proof system of RelAPS is working correctly.

An Interactive Theorem Prover for First-Order Dynamic Logic

Dynamic logic is an extension of modal logic originally intended for reasoning about computer programs. The method of proving correctness of properties of a computer program using the well-known Hoare Logic can be implemented by utilizing the robustness of dynamic logic. For a very broad range of languages and applications in program veri cation, a theorem prover named KIV (Karlsruhe Interactive Veri er) Theorem Prover has already been developed. But a high degree of automation and its complexity make it di cult to use it for educational purposes. My research work is motivated towards the design and implementation of a similar interactive theorem prover with educational use as its main design criteria. As the key purpose of this system is to serve as an educational tool, it is a self-explanatory system that explains every step of creating a derivation, i.e., proving a theorem. This deductive system is implemented in the platform-independent programming language Java. In addition, a very popular combination of a lexical analyzer generator, JFlex, and the parser generator BYacc/J for parsing formulas and programs has been used.

L-Fuzzy Relations in Coq

Heyting categories, a variant of Dedekind categories, and Arrow categories provide a convenient framework for expressing and reasoning about fuzzy relations and programs based on those methods. In this thesis we present an implementation of Heyting and arrow categories suitable for reasoning and program execution using Coq, an interactive theorem prover based on Higher-Order Logic (HOL) with dependent types. This implementation can be used to specify and develop correct software based on L-fuzzy relations such as fuzzy controllers. We give an overview of lattices, L-fuzzy relations, category theory and dependent type theory before describing our implementation. In addition, we provide examples of program executions based on our framework.