Pizgrischite, (Cu,Fe)Cu14PbBi17S35, a new sulfosalt from the Swiss Alps: Description, crystal structure and occurrence

Pizgrischite, (Cu,Fe)Cu14PbBi17S35, is a new mineral species named after the type locality, Piz Grisch Mountain, Val Ferrera, Graubunden, Switzerland. This sulfosalt occurs as thin, striated, metallic lead-grey blades measuring up to I cm in length, embedded in quartz and associated with tetrahedrite, chalcopyrite, pyrite, sphalerite, emplectite and derivatives of the aikinite-bismuthinite series. In plane-polarized light, the new species is brownish grey with no perceptible pleochroism; under crossed nicols in oil immersion, it presents a weak anisotropy with dark brown tints. Minimum and maximum reflectance values (in %) in air are: 40.7-42.15 (470 nm), 41.2-43.1 (546 nm), 41.2-43.35 (589 nm) and 40.7-43.3 (650 nm). Cleavage is perfect along 001 I and well developed on {010}. Abundant polysynthetic twinning is observed on (010). The mean micro-indentation hardness is 190 kg/mm(2) (Mohs hardness 3.3), and the calculated density is 6.58 g/cm(3). Electron-microprobe analyses yield (wt%; mean result of seven analyses): Cu 16.48, Pb 2.10, Fe 0.77, Bi 60.70, Sb 0.35, S 19.16, Se 0.04, total 99.60. The resulting empirical chemical formula is (Cu15.24Fe0.80Pb0.60)(Sigma 16.64)(Bi17.07Sb0.17)(Sigma 17.24)(S35.09Se0.03)(Sigma 35.12), in accordance with the formula derived from the single-crystal refinement of the structure, (Cu,Fe)Cu14PbBi17S35. Pizgrischite is monoclinic, space group C2/m, with the following unit-cell parameters: a 35.054(2), b3.91123(I), c43.192(2) angstrom, beta 96.713(4)degrees, V5881.24 angstrom(3), Z=4. The strongest seven X-ray powder-diffraction lines [d in angstrom (I)(hkl)] are: 5.364(40)((6) over bar 04), 4.080(50)((8) over bar 05), 3.120(40)(118), 3.104(68)((3) over bar 18), 2.759(53) ((9) over bar 11),2.752(44)(910) and 1.956(100)(020). The crystal structure is an expanded monoclinic derivative of kupcikite. Pizgrischite belongs to the cuprobismutite series of bismuth sulfosalts but, sensu stricto, it is not a homologue of cuprobismutite. At the type locality. pizarischite is the result of the Alpine metamorphism under greenschist-facies conditions of pre-Tertiary hydrothermal Cu-Bi mineralization.

Biochemical, immunological and toxicological characteristics of the crystal proteins of Bacillus thuringiensis subsp. medellin

Characterization of the insecticidal and hemolytic activity of solubilized crystal proteins of Bacillus thuringiensis (Bt) subsp. medellin (Btmed) was performed and compared to solubilized crystal proteins of isolates 1884 of B. thuringiensis subsp. israelensis (Bti) and isolate PG-14 of B. thuringiensis subsp. morrisoni (Btm). In general, at acid pH values solubilization of the Bt crystalline parasporal inclusions (CPI) was lower than at alkaline pH. The larvicidal activity demonstrated by the CPI of Btmed indicated that optimal solubilization of CPI takes place at a pH value of 11.3, in Bti at pH values from 5.03 to 11.3 and in Btm at pH values from 9.05 to 11.3. Hemolytic activity against sheep red blood cells was mainly found following extraction at pH 11.3 in all Bt strains tested. Polyacrylamide gel electrophoresis under denaturing conditions revealed that optimal solubilization of the CPI in all Bt strains takes place at the alkaline pH values from 9.05 to 11.3. An enriched preparation of Btmed crystals was obtained, solubilized and crystal proteins were separated on a size exclusion column (Sephacryl S-200). Three main protein peaks were observed on the chromatogram. The first peak had two main proteins that migrate between 90 to 100 kDa. These proteins are apparently not common to other Bt strains isolated to date. The second and third peaks obtained from the size exclusion column yielded polypeptides of 68 and 28-30 kDa, respectively. Each peak independently, showed toxicity against 1st instar Culex quinquefasciatus larvae. Interestingly, combinations of the fractions corresponding to the 68 and 30 kDa protein showed an increased toxicity. These results suggest that the 94 kDa protein is an important component of the Btmed toxins with the highest potency to kill mosquito larvae. When crystal proteins of Bti were probed with antisera raised independently against the three main protein fractions of Btmed, the only crystal protein that showed cross reaction was the 28 kDa protein. These data suggest that Btmed could be an alternative bacterium for mosquito control programs in case mosquito larval resistance emerges to Bti toxic proteins.

Experimental calcium oxalate crystal production and dissolution by selected wood rot fungi.

Twenty-six species of white-rotting Agaricomycotina fungi (Basidiomycota) were screened for their ability to produce calcium-oxalate (CaOx) crystals in vitro. Most were able to produce CaOx crystals in malt agar medium in the absence of additional calcium. In the same medium enriched with Ca2+, all the species produced CaOx crystals (weddellite or whewellite). Hyphae of four species (Ganoderma lucidum, Polyporus ciliatus, Pycnoporus cinnabarinus, and Trametes versicolor) were found coated with crystals (weddellite/whewellite). The production of CaOx crystals during the growth phase was confirmed by an investigation of the production kinetics for six of the species considered in the initial screening (Pleurotus citrinopileatus, Pleurotus eryngii, Pleurotus ostreatus, P. cinnabarinus, Trametes suaveolens, and T. versicolor). However, the crystals produced during the growth phase disappeared from the medium over time in four of the six species (P. citrinopileatus, P. eryngii, P. cinnabarinus, and T. suaveolens). For P. cinnabarinus, the disappearance of the crystals was correlated with a decrease in the total oxalate concentration measured in the medium from 0.65 μg mm−2 (at the maximum accumulation rate) to 0.30 μg mm−2. The decrease in the CaOx concentration was correlated with a change in mycelia morphology. The oxalate dissolution capability of all the species was also tested in a medium containing calcium oxalate as the sole source of carbon (modified Schlegel medium). Three species (Agaricus blazei, Pleurotus tuberregium, and P. ciliatus) presented a dissolution halo around the growth zone. This study shows that CaOx crystal production is a widespread phenomenon in white-rot fungi, and that an excess of Ca2+ can enhance CaOx crystal production. In addition, it shows that some white-rot fungal species are capable of dissolving CaOx crystals after growth has ceased. These results highlight a diversity of responses around the production or dissolution of calcium oxalate in white-rot fungi and reveal an unexpected potential importance of fungi on the oxalate cycle in the environment.

Extensional flow of nematic liquid crystal under electric field gradient

Systematic asymptotic methods are used to formulate a model for the extensional flow of a thin sheet of nematic liquid crystal. With no external body forces applied, the model is found to be equivalent to the so-called Trouton model for Newtonian sheets (and fi bers), albeit with a modi fied "Trouton ratio". However, with a symmetry-breaking electric field gradient applied, behavior deviates from the Newtonian case, and the sheet can undergo fi nite-time breakup if a suitable destabilizing field is applied. Some simple exact solutions are presented to illustrate the results in certain idealized limits, as well as sample numerical results to the full model equations.

A new rapid colourimetric method for testing Mycobacterium tuberculosis susceptibility to isoniazid and rifampicin: a crystal violet decolourisation assay

The aim of this study was to investigate the performance of a new and accurate method for the detection of isoniazid (INH) and rifampicin (RIF) resistance among Mycobacterium tuberculosis isolates using a crystal violet decolourisation assay (CVDA). Fifty-five M. tuberculosis isolates obtained from culture stocks stored at -80ºC were tested. After bacterial inoculation, the samples were incubated at 37ºC for seven days and 100 µL of CV (25 mg/L stock solution) was then added to the control and sample tubes. The tubes were incubated for an additional 24-48 h. CV (blue/purple) was decolourised in the presence of bacterial growth; thus, if CV lost its colour in a sample containing a drug, the tested isolate was reported as resistant. The sensitivity, specificity, positive predictive value, negative predictive value and agreement for INH were 92.5%, 96.4%, 96.1%, 93.1% and 94.5%, respectively, and 88.8%, 100%, 100%, 94.8% and 96.3%, respectively, for RIF. The results were obtained within eight-nine days. This study shows that CVDA is an effective method to detect M. tuberculosis resistance to INH and RIF in developing countries. This method is rapid, simple and inexpensive. Nonetheless, further studies are necessary before routine laboratory implementation.

Crystal structure of NLRC4 reveals its autoinhibition mechanism.

Nucleotide-binding and oligomerization domain-like receptor (NLR) proteins oligomerize into multiprotein complexes termed inflammasomes when activated. Their autoinhibition mechanism remains poorly defined. Here, we report the crystal structure of mouse NLRC4 in a closed form. The adenosine diphosphate-mediated interaction between the central nucleotide-binding domain (NBD) and the winged-helix domain (WHD) was critical for stabilizing the closed conformation of NLRC4. The helical domain HD2 repressively contacted a conserved and functionally important α-helix of the NBD. The C-terminal leucine-rich repeat (LRR) domain is positioned to sterically occlude one side of the NBD domain and consequently sequester NLRC4 in a monomeric state. Disruption of ADP-mediated NBD-WHD or NBD-HD2/NBD-LRR interactions resulted in constitutive activation of NLRC4. Together, our data reveal the NBD-organized cooperative autoinhibition mechanism of NLRC4 and provide insight into its activation.

Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps

Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps Darbellay Bastien Institut de Minéralogie et Géochimie Résumé grand public Comme toute matière, la roche est sensible à son environnement et cherche à s'adapter pour acquérir un état stable (état d'équilibre). Les changements des conditions physiques (température et pression) vont ainsi impliquer des modifications dans la roche. Le métamorphisme est l'étude de ces changements. Les minéraux qui constituent la roche peuvent modifier, leur structure, leur chimie ou être remplacer par d'autres minéraux plus stables. Il est ainsi crucial de déterminer les processus responsables et limitant de la croissance minérale. Trois processus permettent la croissance ; (1) la dissolution des éléments du réactant, (2) le transport de ces éléments vers le site de croissance, (3) l'incorporation de ces éléments dans la nouvelle structure. Cette thèse se focalise sur les structures des minéraux de haute pression (forme, zonation chimique, structure interne) pour essayer de déterminer les facteurs importants à l'origine de leur état final. Les zones d'étude se situent dans la zone de Sésia. La première partie traite de la problématique liée à l'incorporation d'un élément dans une structure minérale. A l'image de la croissance humaine, les irrégularités minéralogiques permettent de mettre en lumière un dysfonctionnement de la croissance due à un excès ou à une carence d'un élément. Bien dosé, cet élément est cependant essentiel à la croissance. Les zoisites (épidotes) des métabasites de la région de Cima di Bonze montrent une zonation chimique en sablier. Dans cette zonation la teneur en fer excède la capacité maximum que peut contenir la structure orthorhombique de la zoisite. Des défauts de structure permettent l'accommodation de cet excès. La zoisite peut ainsi adapter sa structure pour permettre l'incorporation d'une relativement grande quantité de fer. Les études précédentes montraient, pour des conditions similaires, la formation de deux épidotes distinctes. La deuxième partie se penche sur la compétition entre le minéral qui fait sa croissance et les minéraux (réactants) qui l'entourent. Les métapélites de la région du Monte Mucrone contiennent des grenats atollaires. Des études détaillées de la texture et de la zonation chimique du grenat ainsi qu'une modélisation thermodynamique ont permis de mieux cerner les facteurs importants responsables de la forme atollaire. Cette structure est obtenue par un changement du comportement de la croissance du grenat le long d'un chemin P-T hercynien. Dans un premier stade, le grenat croît rapidement et consume peu le quartz de la matrice. La croissance se fait ainsi le long des jointures des grains de quartz. Dans un second temps, les changements de conditions PT donnent une croissance lente du grenat et une forte consommation du quartz. Le grenat peut ainsi développer sa forme dodécaédrale classique. La troisième partie s'intéresse aux distances de transport par diffusion d'un élément (ici l'argon) durant la haute pression. Pour ce faire, un profile d'âges 40Ar/39Ar sur biotite a été mesuré depuis un veine de haute pression riche en argon jusque dans son encaissant (granitoïd du Monte Mucrone). Le profile montre une répartition des âges suivant une courbe de diffusion. Le transport se fait sur une longueur de deux centimètre avec l'aide d'un fluide. Il est réduit à une échelle millimétrique quand la phase fluide disparaît. Cette étude montre ainsi les difficultés de transport des éléments durant la haute pression ne permettant pas un rééquilibrage de la roche à grande échelle. Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps Darbellay Bastien Institut de Minéralogie et Géochimie Résumé de thèse Les processus de croissance (diffusion des éléments et les réactions d'interface) et les conditions dans lesquelles les minéraux grandissent (température, pression, fluide, composition chimique de la roche), déterminent la texture ainsi que la zonation des minéraux. Cette thèse se focalise, par le biais de textures peu communes, sur trois différents processus impliqués dans la croissance minérale à haute pression (Zone de Sésia, Alpes de l'Ouest, Italie). L'incorporation d'un élément dans une structure minérale ne peut se faire que dans des sites en accord avec la taille et la charge ionique de l'élément. De plus, la balance de charge doit être maintenue dans le minéral. La régularité de la structure cristalline fixe ainsi une limite maximum de concentration d'un élément donné. Les zoisites provenant des métabasites de la région de Cima di Bonze montrent des zonations en sablier caractérisées par une concentration anormale en fer. La zonation se marque par une différente teinte de biréfringence et par un plus grand angle d'extinction que le reste de la zoisite. Une inter-croissance de clinozoisite à l'intérieur de la structure orthorhombique de la zoisite peut ainsi être suspectée. Les analyses XRD (diffraction des rayons x) ainsi que les analyses Raman ne confirment pas cette suspicion. Seules les analyses TEM (microscope à électrons transmis) montrent des défauts de structure pouvant être interprétés comme des modules de clinozoisite. Ils ne peuvent cependant pas être considérés comme une phase thermodynamique. Un nouveau trou d'immiscibilité entre deux zoisite (X ep= 0.1 and Xep = 0.15) a ainsi pu être établi. Dans les métapélites la région du Monte Mucrone, des grenats fortement zonés montrent une évolution texturale singulière. Ils présentent une forme initiale de `champignon' qui se développe pour former une structure atollaire finale. L'étude conjuguée de la structure 3D et des zonations, ainsi que l'établissement d'un model thermodynamique, indiquent que ces structures proviennent de deux épisodes de croissances : (1) La croissance du grenat durant un chemin prograde hercynien (de 525 °C et 6.2 kbar à 640 °C et 9 kbar) permet la formation des textures atollaires. Elles sont le résultat d'une croissance poecilitique initiale suivie d'une croissance idiomorphique du grenat. (2) La structure est rendue plus complexe par la cristallisation d'un grenat homogène tout autour ainsi qu'à l'intérieur du grenat hercynien durant la haute pression alpine (550 °C and 20 kbar). L'arrivée de l'eau durant la haute pression facilite le transport d'éléments et permet une cristallisation rapide du grenat. La diffusion peut être un facteur limitant de la croissance minéralogique. Elle a aussi une grande importance pour la géochronologie. Une veine de haute pression à l'intérieur du granitoïde du Monte Mucrone a été étudiée dans le but de déterminer la distance de diffusion de l'argon. Le profile d'âges 40Ar/39Ar sur biotites, établi de la veine vers le métagranitoïde, suit une courbe de diffusion. Les âges sont élevés proche de la veine (800 Ma) puis décroissent jusqu'à des âges homogènes (170-150 Ma) à deux centimètres de la veine. La présence de fluide, marqué par de hautes concentrations en chlore, permet une diffusion centimétrique. Cependant, la distance est réduite à une échelle millimétrique quand le fluide est absent. Les très faibles distances de diffusion préservent les âges pré-alpins et impliquent un événement géologique pour les âges de 170-150 Ma. Kinetics of crystal growth and equilibrium domains in eclogite of the Sesia Zone, Western Alps Darbellay Bastien Institut de Minéralogie et Géochimie Thesis abstract Rock textures and zonings are the consequence of growth processes (element diffusion and interface reaction) steered by the environment in which they grew (pressure, differential stress, temperature, fluid and rock composition). The thesis presented here focuses on three different topics, each of it dealing with aspects of mineral growth processes during subduction, in a high-pressure environment. All studies were conducted in the Sesia Zone of the Western European Alps, Italy. The first study addresses the crystallography and geochemistry of element incorporation in zoisite, one of the major hydrous minerals found in subduction zone rocks. Elements can be incorporated into a mineral structure only on crystallographic sites that offer enough space for the ion and the overall charge balance has to be maintained. Element concentrations are hence limited. Incorporation of some elements produces complex zoning, including hourglass like patterns, which are the focus of the first contribution. Zoisites from Cima di Bonze (Sesia Zone) show spectacular hourglass zoning defined by Fe-content variations. The hourglass zones have a distinct birefringence and a different extinction angle than the regular part of the zoisite. We show by detailed XRD (X-ray diffraction) and confocal Raman analyses that the high Fe-zones are nevertheless zoisite, and not clinozoisite as one might expect. High resolution TEM (transmission electron microscopy) analyses show planar defects on (100) that can be interpreted as small-scale clinozoisite modules. However, these clinozoisites cannot be interpreted as a distinctive thermodynamic phase and the entire mineral has to be considered as zoisite. The miscibility gap between two zoisites (Xep = 0.1 and Xep = 0.15) can be then definite at 550 ± 50°C and 14 to 20 Kbar. Strongly zoned garnets in quartz rich metapelite from the Monte Mucrone area (Sesia Zone) show evolution form 3D mushroom to atoll structure. The second contribution presents textural investigations, garnet zoning and thermodynamic modeling that demonstrate that atoll garnets are the result of two distinctive growth events. (1) Garnet atoll structure is already formed during a prograde Hercynian path from 525 °C and 6.2 kbar to 640 °C and 9 kbar. It results in an initial poikilitic growth followed by a final idiomorphic growth event. (2) Alpine HP garnet are homogenous (550 °C and 20 kbar) and grew around and also inside the Hercynian garnet. Lack of prograde Alpine garnet and fast growth of the HP garnet is explained by the absence of water during much of the prograde path. Water saturation was only observed towards the end, close towards the peak metamorphic conditions. Diffusion could be a limiting factor for crystal growth. It has also a great importance in geochronology. HP vein inside the metagranitoide of the Monte Mucrone (~300 Ma) was investigated to determine argon diffusion scales during high-pressure metamorphism. 40Ar/39Ar biotite ages profile from the vein toward the metagranodiorite show a diffusion curve: old ages (800 Ma) located close to the vein decrease until homogenous 170-150 Ma ages are obtained, two centimeter away from the vein. Centimeter-scale diffusion occurs with help of a fluid phase marked by high chlorine concentrations. Argon diffusion is reduced to a millimeter scale when free fluid is absent. Very short diffusion distance permits to preserve pre-Alpine ages. The 170-150 Ma ages are considered to be geologic meaningful, probably resulting from the extensional tectonics linked to opening of the Tethian ocean.

Intracellular nanomanipulation by a photonic-force microscope with real-time acquisition of a 3D stiffness matrix.

A traditional photonic-force microscope (PFM) results in huge sets of data, which requires tedious numerical analysis. In this paper, we propose instead an analog signal processor to attain real-time capabilities while retaining the richness of the traditional PFM data. Our system is devoted to intracellular measurements and is fully interactive through the use of a haptic joystick. Using our specialized analog hardware along with a dedicated algorithm, we can extract the full 3D stiffness matrix of the optical trap in real time, including the off-diagonal cross-terms. Our system is also capable of simultaneously recording data for subsequent offline analysis. This allows us to check that a good correlation exists between the classical analysis of stiffness and our real-time measurements. We monitor the PFM beads using an optical microscope. The force-feedback mechanism of the haptic joystick helps us in interactively guiding the bead inside living cells and collecting information from its (possibly anisotropic) environment. The instantaneous stiffness measurements are also displayed in real time on a graphical user interface. The whole system has been built and is operational; here we present early results that confirm the consistency of the real-time measurements with offline computations.

Electron microscopy of RecA-DNA complexes: Two different states, their functional significance and relation to the solved crystal structure

Seven different electron microscopy techniques habe been employed to study the RecA protein of E. coli. This review provides a summary of the conclusions that have been drawn from these studies, and attempts to relate these observations to models for the role of RecA protein in homologous recombination.

Crystal packing modifies ligand binding affinity: the case of aldose reductase.

The relationship between the structures of protein-ligand complexes existing in the crystal and in solution, essential in the case of fragment-based screening by X-ray crystallography (FBS-X), has been often an object of controversy. To address this question, simultaneous co-crystallization and soaking of two inhibitors with different ratios, Fidarestat (FID; K(d) = 6.5 nM) and IDD594 (594; K(d) = 61 nM), which bind to h-aldose reductase (AR), have been performed. The subatomic resolution of the crystal structures allows the differentiation of both inhibitors, even when the structures are almost superposed. We have determined the occupation ratio in solution by mass spectrometry (MS) Occ(FID)/Occ(594) = 2.7 and by X-ray crystallography Occ(FID)/Occ(594) = 0.6. The occupancies in the crystal and in solution differ 4.6 times, implying that ligand binding potency is influenced by crystal contacts. A structural analysis shows that the Loop A (residues 122-130), which is exposed to the solvent, is flexible in solution, and is involved in packing contacts within the crystal. Furthermore, inhibitor 594 contacts the base of Loop A, stabilizing it, while inhibitor FID does not. This is shown by the difference in B-factors of the Loop A between the AR-594 and AR-FID complexes. A stable loop diminishes the entropic energy barrier to binding, favoring 594 versus FID. Therefore, the effect of the crystal environment should be taken into consideration in the X-ray diffraction analysis of ligand binding to proteins. This conclusion highlights the need for additional methodologies in the case of FBS-X to validate this powerful screening technique, which is widely used.

Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D

We review methods to estimate the average crystal (grain) size and the crystal (grain) size distribution in solid rocks. Average grain sizes often provide the base for stress estimates or rheological calculations requiring the quantification of grain sizes in a rock's microstructure. The primary data for grain size data are either 1D (i.e. line intercept methods), 2D (area analysis) or 3D (e.g., computed tomography, serial sectioning). These data have been used for different data treatments over the years, whereas several studies assume a certain probability function (e.g., logarithm, square root) to calculate statistical parameters as the mean, median, mode or the skewness of a crystal size distribution. The finally calculated average grain sizes have to be compatible between the different grain size estimation approaches in order to be properly applied, for example, in paleo-piezometers or grain size sensitive flow laws. Such compatibility is tested for different data treatments using one- and two-dimensional measurements. We propose an empirical conversion matrix for different datasets. These conversion factors provide the option to make different datasets compatible with each other, although the primary calculations were obtained in different ways. In order to present an average grain size, we propose to use the area-weighted and volume-weighted mean in the case of unimodal grain size distributions, respectively, for 2D and 3D measurements. The shape of the crystal size distribution is important for studies of nucleation and growth of minerals. The shape of the crystal size distribution of garnet populations is compared between different 2D and 3D measurements, which are serial sectioning and computed tomography. The comparison of different direct measured 3D data; stereological data and direct presented 20 data show the problems of the quality of the smallest grain sizes and the overestimation of small grain sizes in stereological tools, depending on the type of CSD. (C) 2011 Published by Elsevier Ltd.