335 resultados para perna


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Volleyball is a sport in which the laterality dominant limb shows superior strength and coordination because of its preferential use. Asymmetrical tendencies during the landing after the jump when striking or blocking actions are predominant for most part of game (ARRUDA; EDUARDO, 2008). Adaptations include imbalance of forces in static and dynamic motions at the knee joint, which increases risk for injury. Also, asymmetries in balance control during jumping and landing associate with a general postural instability that can be observed during static balance tasks. The purpose of this study was to investigate relationship between unequal lower limb strength (muscle imbalance) and postural stability levels in volleyball athletes and non-athletes. Nine female volleyball athletes and 10 active non-athletes participated in this study. Four encouters with participants were scheduled: three encounters in the bodybuilding gymnasium to collect anthropometric measures (weight, height for BMI, thigh circumference, which provided an initial diagnosis about asymmetry), and to perform the isometric strength test (i.e., leg press using a load cell and a force transducer to calculate uni an bilateral strength). The last encounter was in the laboratory where a balance test on a force platform was administered under five test conditions, with three repetitions each: baseline (natural standing position), one-leg standing, right side, with full vision (D_CV), and blindfolded (D_SV), one-leg standing, left side, with full vision (E_CV), and blindfolded (E_SV). The stability levels were evaluated using the path length parameters which was based on the total displacement of the center of pressure (DTCP). . Both groups shows asymmetric strength levels between legs, with better performance for the right leg. An ANOVA three way using the DTCP for the CV condition, legs (D x E), trials (3) with repeated measures for the first two factors and with a between (three)...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this study was to investigate the influence of previous active static stretch on the peak torque (PT) and rate of force development (TDF) during isokinetic concentric contractions at 60 and 180.s-1 in active individuals. Twelve active subjects with ages between 18 and 30 years participated of this study. The individuals were submitted in different days to the following tests: 1) Familiarization session to the isokinetic dynamometer; 2) Five maximal isokinetic concentric contractions for knee extensors at each angular velocity (60 and 180.s-1) to determine PT and TDF (Control), and; 3) Two active static stretching exercises for the dominant leg extensors (10 x 30 s for each exercise, with 20 s of rest). After the stretching, the isokinetic test was repeated (Post-Stretching). The conditions 2 and 3 were performed in random order. There was no significant modification after the stretch exercises on the PT, angle and time at which the PT was attained, at 60 and 180º.s-1. In the same way, there was no significant modification on the TDF and angle at which the maximal TDF was attained in both angular speeds. In other way, the time to attain maximal TDF (TTDF) at 180º.s-1 was significantly lower after the stretching (Pre - 98.3 ± 27.5 ms and Post - 86.6 ± 30.2 ms). There was significant modification on the torque (60 and 180º.s-1) and time (60º.s-1) at different delta of angle variations, obtained at 60º.s-1 at Control and Post-Stretching conditions. However, there was significant reduction of time after the stretching exercises on delta of angle variations of 90-88º (Pre - 46.6 ± 6.5 ms and Post - 44.1 ± 5.1 ms), 88-85º (Pre - 65.8 ± 7.9 ms and Post - 63.3 ± 4.9 ms) and 85-80º (Pre - 93.3 ± 7.7 ms and Post - 90.0 ± 4.2 ms) at 180º.s-1. With base on these data, it is possible to conclude that PT and TDF do not modify after static stretching, irrespectively on the speed...(Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Indoor soccer is a modality of sport similar to football, which is accompanying an increasing of the number of participants. With the growth of this sport, increased as well the number of injuries, which has been requiring greater attention and care from the health professionals. AIMS: To investigate the functional balance before and after an indoor soccer game and analyze the maximum force before and after the game, in order to verify if there is a great loss of muscle strength of knee flexors and extensors during the game. METHODS: The study included seven amateur soccer players. The isokinetic evaluation was made using the Biodex 3 isokinetic dynamometer at velocities of 60°/s and 180°/s with five repetitions at each velocity for each leg. Further, the study analyzed the peak torque of each leg at each speed of the extensor muscles and flexor concentric and eccentric. RESULTS: Compared to the peak torque before and after the game, there were no significant differences. At 60°/s in the non-dominant leg, peak torque decreased after the game of the extensor concentric and eccentric. In the dominant leg there was a decrease of peak torque in eccentric flexion at 60°/s and concentric flexion to 180°/s. Comparing the peak torque between dominance, there was any significant differences in speed. However, in eccentric flexion at 60°/s before the match there was a significant difference. The peak torque of the dominant leg showed better results than the non-dominant leg. Regarding the functional balance there was no statistically significant differences between the muscles involved. CONCLUSION: From the results achieved, it is possible to conclude that the peak torque of flexor eccentric decreases depending on the length of the exercise. This muscle is stronger in the dominant leg, comparing to the non-dominant leg

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper consists in the evaluation of the exposure rate to ionizing radiation to which professionals working in surgical procedures which require radiological examinations are subjected. Were initially performed real-time readings of exposure rate within four distinct operating rooms during the execution of four surgical procedures that made use of fluoroscopy equipment (including three orthopedic surgeries, one in the shoulder, one in the arm, another for deployment of metal pin in the leg region, and a fourth for vascular procedure); in these surgeries were used ionization chamber detector and an electrometer. In order to check the values achieved, was made a re-evaluation of the distribution of the rate of exposure to radiation, from the surgical procedures, now with thermoluminescent dosimeters (TLDs). For this, thirty TLDs were distributed in the operating rooms, arranged in points of interest as occupation by professionals. The TLDs were prepared for thirty consecutive days, after which they were removed and replaced with new dosimeters not exposed yet. The dosimeters were subjected to reading of the rate of exposure; this procedure was repeated for four months without interruption. The quantification of the results sought primarily to convert the rate of exposure for equivalent dose rate, both in measurements with ionization chamber as in measurements with TLDs, in order to highlight the presence of the biological effect of ionizing radiation for comparisons within scientific context. Then, the results were plotted to establish the relationship between the values of equivalent dose and the distance to the central axis of the x -ray source, confirming the inverse square law for distance. Finally, the values were associated with the maximum limit recommended by the legislation for occupationally exposed individuals. The methodology for the analysis and quantification of the data in this work aims at implementing a work plan that meets ...

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Cirurgia Veterinária - FCAV

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A dança é uma das formas de expressão artística mais antiga da história da humanidade. O movimento da dança em foco no presente estudo foi a pirouette do ballet clássico. Tal movimento é caracterizado por um ou mais giros em torno do seu próprio eixo, executado sobre uma perna seja em meia ponta ou ponta completa, enquanto a outra está flexionada, com o pé abaixo do joelho da perna de apoio. O presente estudo consistiu em examinar o perfil cinético do movimento pirouette de bailarinas experientes e não experientes no Ballet Clássico. A hipótese é de que as variáveis relativas à força para produzir o giro influencie na realização do pirouette. As participantes do estudo foram convidadas a realizar o pirouette sobre uma plataforma de força. Os resultados do presente estudo demonstraram que as bailarinas experientes aplicam maior força para iniciar o giro em relação às participantes não experientes. Em conjunto, os resultados do presente estudo sugerem que a força vertical aplicada para iniciar o giro, a qual denominamos impulso inicial, parece ser determinante para a boa performance no movimento pirouette da bailarina. Os resultados do presente estudo oferece uma importante contribuição aos técnicos e professores de dança de forma a valorizar questões de controle motor e postural no processo ensino-aprendizagem do pirouette

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Com o objetivo de avaliar as características de carcaça e a alometria dos cortes comerciais e dos tecidos de cabritos F1 Boer × Saanen, 35 animais foram abatidos ao atingirem 5, 10, 15, 20 e 25 kg de peso vivo (PV). A dieta dos animais foi composta de leite de vaca nos primeiros 49 dias e ração à vontade do sétimo dia até o abate. Os cortes foram obtidos após o resfriamento da carcaça e a perna foi dissecada em músculo, osso e gordura. O PV teve efeito linear decrescente no rendimento de carcaça fria e na área de olho-de-lombo por kg de carcaça. Os pesos de perna, paleta e pescoço em relação à carcaça fria decresceram linearmente, mas houve efeito quadrático sobre o rendimento de costelas e lombo. O crescimento de paleta, pescoço e perna foi isométrico (b=1) ao do corpo, enquanto o das costelas e do lombo foi mais lento (b¹ 1). Os músculos da perna cresceram igualmente, a gordura mais lenta e os ossos mais rapidamente que a perna, enquanto o desenvolvimento da gordura subcutânea foi mais tardio que o da intermuscular. Para obtenção de carcaça de 8 a 11 kg com rendimento superior a 44%, boa proporção de músculo e gordura com menor perda durante o resfriamento, recomenda-se abater os animais com PV entre 20 e 25 kg, mas, se o objetivo for carcaça de menor peso, o abate dos animais deve ser feito ao final do aleitamento com aproximadamente 10 kg de peso corporal.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The dentist has been suggested as a professional vulnerable to labor risks mainly related to working posture. This study examined the application of ergonomics principles during the dental attendances made by university student of the last period of the Araçatuba Dental University. Twenty-four attendants were photographed and the images were digitally analyzed for the verification of 10 requirements that determine a healthy labor posture, defined by the project ISO Standard / TC 106/SC 6 N 411. It was observed that 50% of items from the check list obtained higher percentages of negative replies. The students had greater difficulties as to the correct position of the angle between the upper and lower leg when sitting, the ideal adjustment of the light focus reflector in the field of work and the patient positioning. It was concluded that the dental attendances were held without compliance with the ergonomic requirements. The greatest difficulties regarding the work posture were the sitting posture, the light beam and the patient positioning. Students need better guidance about ergonomic principles and requirements, which should occur at any time of life, but earliest they are installed, greater the benefits, assimilation and incorporation of adequate working postures will be. We need a reform that addresses all sectors of the dental system, so that learning and application of ergonomics in dentistry become effective, efficient and effective.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)