Transition metal ion coordination in hydrophilic polymer membranes

The research described within this thesis is concerned with the investigation of transition metal ion complexation within hydrophilic copolymer membranes. The membranes are copolymers of 4-methyl-4'-vinyl-2,2'-bipyridine, the 2-hydroxyethyl ester of 4,4'- dicarboxy-2,2'-bipyridine & bis-(5-vinylsalicylidene)ethylenediamine with 2-hydroxyethyl methacrylate. The effect of the polymer matrix on the formation and properties of transition metal iron complexes has been studied, specifically Cr(III) & Fe(II) salts for the bipyridyl- based copolymer membranes and Co(II), Ni(II) & Cu(II) salts for the salenH2- based copolymer membranes. The concomitant effect of complex formation on the properties of the polymer matrix have also been studied, e.g. on mechanical strength. A detailed body of work into the kinetics and thermodynamics for the formation of Cu(II) complexes in the salenH2- based copolymer membranes has been performed. The rate of complex formation is found to be very slow while the value of K for the equilibrium of complex formation is found to be unexpectedly small and shows a slight anion dependence. These phenomena are explained in terms of the effects of the heterogeneous phase provided by the polymer matrix. The transport of Cr(III) ions across uncomplexed and Cr(III)-pre-complexed bipyridyl-based membranes has been studied. In both cases, no Cr(III) coordination occurs within the time-scale of an experiment. Pre-complexation of the membrane does not lead to a change in the rate of permeation of Cr(III) ions. The transport of Co(II), Ni(II) & Cu(II) ions across salenH2- based membranes shows that there is no detectable lag-time in transport of the ions, despite independent evidence that complex formation within the membranes does occur. Finally, the synthesis of a number of functionalised ligands is described. Although they were found to be non-polymerisable by the methods employed in this research, they remain interesting ligands which provide a startmg pomt for further functionalisation.

Titanium dioxide photocatalytic degradation of aliphatic ethers and their primary oxidation products

Two studies were performed to obtain fundamental mechanistic information on the TiO2 catalyzed degradation of organic substrates irradiated at 350 nm in dilute aqueous solutions under oxygenated conditions: (a) The photodecomposition of methyl tert-butyl ether (MTBE) and its intermediate products from β-oxidation, 2-methoxy-2-methylpropanol and 2-methoxy-2-methylpropanol. (b) The photodecomposition of two haloethers, bis-(2-chloroethyl) ether, and bis-(2-chloroisopropyl) ether. Controls were carried out throughout the two studies in the absence of light, and without the semiconductor in order to evaluate the role of photolysis. ^ The syntheses of proposed intermediate products, 2-methoxy-2-methylpropanol, 2-methoxy-2-methylpropanal, 2-methoxy-2-methylpropanoic acid, 2-chloroethyl formate, and 1-chloro-2-propyl acetate, were performed. The formation of these products in the titanium dioxide photocatalytic oxidation of the substrates of interest was also confirmed. TiO2 photocatalysis is a very effective method for the mineralization of aliphatic ethers and their primary oxidation products. ^

Impurity profiling and synthesis of precursors to the hallucinogenic amphetamine DOB

DOB (4‐bromo‐2,5‐dimethoxyamphetamine) is a newly emerging hallucinogenic amphetamine that sparked serious health warnings in Ireland, following its first seizure back in 2003. Known more commonly as “snowball”, this drug is highly potent and may be used as a substitute to ecstasy (MDMA) and lysergic acid diethylamide (LSD). To date, the work carried out on the impurity profiling of DOB is limited in comparison to amphetamine, methamphetamine and MDMA. In this work, the impurity profile of 4‐bromo‐2,5‐dimethoxyphenyl‐2‐propanone (4‐Br‐2,5‐P2P) is explored. This ketone is a direct precursor to DOB. Its more versatile non‐bromo analogue, 2,5‐ dimethoxyphenyl‐2‐propanone (2,5‐P2P) is also examined, as in addition to DOB, it may be used in the synthesis of a range of several other hallucinogenic amphetamines. A number of different routes to both 2,5‐P2P and 4‐Br‐2,5‐P2P were investigated. For each of these routes, the impurities produced were carefully isolated. Following isolation, the impurities were fully characterised (by 1H‐NMR/13C‐NMR spectroscopy, IR, MS), in order to aid structure elucidation. Compounds not easily resolved by flash column chromatography were analysed by LC‐MS and/or independently synthesised for the purpose of attaining reference standards. Adaptation of the well‐known ‘phenylacetic acid route’ to synthesis of both 2,5‐P2P and 4‐Br‐2,5‐P2P, was found to provide low yields of the expected ketone products. Four impurities were isolated during the preparation of both ketones. The yield of one of these impurities (possessing a dibenzylketone core), was greatly influenced by the amount of acetic anhydride reagent used during the reaction. Having carried out the reaction with several different equivalents of acetic anhydride, it was found that formation of the ‘dibenzylketone’ could not be eliminated. This may increase its likelihood of being detected in the final drug product. The ‘Darzens route’, having very recently emerged as a synthetic route to amphetamine and MDMA precursors, was discovered to be a viable route for manufacture of 2,5‐P2P and 4‐Br‐2,5‐P2P. Despite execution of the reaction being more tedious, the route provides superior yields (≈50–60%) to those achieved using the ‘phenylacetic acid route’ (≈35–38%). Incorporation of a bromine atom (at the aromatic 4‐position) is required at some stage during synthesis of DOB. The bromination of many intermediates/starting materials was therefore also examined in detail. Bromination of the acid starting material 2,5‐dimethoxyphenylacetic acid (2,5‐PAA) was found to be clean and high yielding. This was in stark contrast to the bromination of the benzaldehyde starting material, the ketone precursor 2,5‐P2P and the dibenzylketone‐based impurity. Numerous brominated products were isolated from each of these reactions, many of which were novel compounds, and previously unreported as impurities in the literature. The unpredictable/nondescript nature of these brominations is likely to have a significant impact on the impurity profile of illicitly produced DOB.

Synthesis and evaluation of novel ellipticines as potential anti-cancer agents

Ellipticine is a natural product which possesses multimodal anti-cancer activity. This thesis encompasses the synthesis and biological evaluation of novel ellipticine and isoellipticine derivatives as anti-cancer agents. Expanding on previous work within the group utilising vinylmagnesium bromide, derivatisation of the C5 position of ellipticine was accomplished by reaction of a key ketolactam intermediate with Grignard reagents. Corresponding attempts to introduce diverse substitution at the C11 position were unsuccessful, although one novel C11 derivative was produced using an alkyllithium reagent. A panel of novel ellipticinium salts encompassing a range of substitutions at the N2, C9 and N6 positions were prepared. Extensive derivatisation of the N10 position of isoellipticine was undertaken for the first time. Novel substitution in the form of acid and methyl ester functionalities were introduced at the C7 position of isoellipticine while novel C7 aldehyde and alcohol derivatives were synthesised. A large panel of isoellipticinium salts were prepared with conditions adjusted for the reactivity of the alkyl halide. Novel coupling reactions to increase the yield of isoellipticine were attempted but proved unsuccessful. A panel of 54 novel derivatives was prepared and a multimodal analysis of their anti-cancer activity was conducted. The NCI 60-human tumour cell lines screen was a primary source of information on the in vitro activity of compounds with derivatives found to exert potent anticancer effects, with mean GI50 values as low as 1.01 μM across the full range of cancer types and as low as 16 nM in individual cell lines. A second in vitro screen in collaboration with researchers in the University of Nantes identified derivatives which could potently inhibit growth in a p53 mutant NSCLC cell line. The cell cycle effects of a selected panel of isoellipticines were studied in leukaemia cell lines by researchers in the Department of Biochemistry and Cell Biology, UCC. Emerging from this, the therapeutic potential of one of the derivatives in AML was then assessed in vivo in an AML xenograft mouse model, with tumour weight reduced by a factor of 7 in treated mice relative to control.

Síntese de ß-cetoésteres graxos a partir do ácido de Meldrum usando DCC e DMAP

Neste trabalho desenvolveu-se a síntese de -cetoésteres, a partir da acilação do ácido de Meldrum usando diferentes ácidos graxos, com cadeias saturadas e insaturadas. Inicialmente, foi realizado o experimento utilizando o ácido palmítico (1e) como modelo para obtenção de cloreto de ácido graxo, usando ácido de Meldrum e piridina como catalisador. Porém, após um longo tempo de reação, o -cetoéster palmítico (4e) foi obtido com baixo rendimento, não ultrapassando os 20%. Posteriormente, os experimentos foram realizados utilizando o ácidos graxos 1e, ácido de Meldrum (2), DCC, DMAP, e piridina à temperatura ambiente sob a atmosfera de nitrogênio. No entanto, o protocolo utilizado resultou no β-cetoéster 4e com rendimentos moderados. Em seguida examinou-se o efeito da adição do ácido de Meldrum após a adição dos ácido graxos e DCC. Neste caso, após a adição do DCC aos ácido graxos 1a-j foi observada a formação imediata das O-aciluréias graxas. A seguir a adição de 2,0 equiv de ácido de Meldrum (2) em diclorometano, revelou a formação dos respectivos enol graxos 3a-j. Posteriormente, os β- cetoésteres 4a-j foram obtidos a partir da reação do enol com o metanol. Este protocolo modificado proporcionou o aumento nos rendimentos (74 a 84%) dos β-cetoéster 4a-j. Após, o β-cetoéster 4k foi sintetizado em 75% utilizando o ácido de Meldrum (2) e ácido ricinoléico (1k), obtido a partir do biodiesel de mamona, à temperatura ambiente e sob a atmosfera de nitrogênio. Portanto, foi desenvolvido um método simples para obter β-cetoésteres graxos, a partir do ácido de Meldrum com cadeias graxas diversificadas utilizando DCC e DMAP. Além disso, o presente trabalho relata pela primeira vez a síntese de novos β-cetoésteres graxos derivados dos ácidos oléico, elaídico, ricinoléico, linoléico e linolênico.

Língua eletrónica: uma ferramenta prática na análise sensorial de azeitonas de mesa

As azeitonas de mesa são consumidas e apreciadas em todo o mundo e, embora a sua classificação comercial não seja legalmente exigida, o Conselho Oleícola Internacional sugere que seja regulamentada com base na avaliação sensorial por um painel de provadores. A implementação de tal requer o cumprimento de diretrizes estabelecidas pelo Conselho Oleícola Internacional, resultando numa tarefa complexa, demorada e cujas avaliações não estão isentas de subjetividade. Neste trabalho, pela primeira vez, uma língua eletrónica foi utilizada com o intuito de classificar azeitonas de mesa em categorias comerciais, estipuladas com base na presença e na mediana das intensidades do defeito organolético predominante percebido pelo painel de provadores. Modelos de discriminação lineares foram estabelecidos com base em subconjuntos de sinais potenciométricos de sensores da língua eletrónica, selecionados recorrendo ao algoritmo de arrefecimento simulado. Os desempenhos qualitativo de previsão dos modelos de classificação estabelecidos foram avaliados recorrendo à técnica de validação cruzada leave-one-out e à técnica de validação cruzada K-folds com repetição, que permite minimizar o risco de sobreajustamento, permitindo obter resultados mais realistas. O potencial desta abordagem qualitativa, baseada nos perfis eletroquímicos gerados pela língua eletrónica, foi satisfatoriamente demonstrado: (i) na classificação correta (sensibilidades ≥ 93%) de soluções padrão (ácido n-butírico, 2-mercaptoetanol e ácido ciclohexanocarboxílico) de acordo com o defeito sensorial que mimetizam (butírico, pútrido ou sapateira); (ii) na classificação correta (sensibilidades ≥ 93%) de amostras de referência de azeitonas e salmouras (presença de um defeito único intenso) de acordo com o tipo de defeito percebido (avinhado-avinagrado, butírico, mofo, pútrido ou sapateira), e selecionadas pelo painel de provadores; e, (iii) na classificação correta (sensibilidade ≥ 86%) de amostras de azeitonas de mesa com grande heterogeneidade, contendo um ou mais defeitos organoléticos percebidos pelo painel de provadores nas azeitona e/ou salmouras, de acordo com a sua categoria comercial (azeitona extra sem defeito, extra, 1ª escolha, 2ª escolha e azeitonas que não podem ser comercializadas como azeitonas de mesa). Por fim, a capacidade língua eletrónica em quantificar as medianas das intensidades dos atributos negativos detetados pelo painel nas azeitonas de mesa foi demonstrada recorrendo a modelos de regressão linear múltipla-algoritmo de arrefecimento simulado, com base em subconjuntos selecionados de sinais gerados pela língua eletrónica durante a análise potenciométrica das azeitonas e salmouras. O xii desempenho de previsão dos modelos quantitativos foi validado recorrendo às mesmas duas técnicas de validação cruzada. Os modelos estabelcidos para cada um dos 5 defeitos sensoriais presentes nas amostras de azeitona de mesa, permitiram quantificar satisfatoriamente as medianas das intensidades dos defeitos (R² ≥ 0,97). Assim, a qualidade satisfatória dos resultados qualitativos e quantitativos alcançados permite antever, pela primeira vez, uma possível aplicação prática das línguas eletrónicas como uma ferramenta de análise sensorial de defeitos em azeitonas de mesa, podendo ser usada como uma técnica rápida, económica e útil na avaliação organolética de atributos negativos, complementar à tradicional análise sensorial por um painel de provadores.

Effect of Dioscorea tokoro Makino extract on hyperuricemia in mice

Purpose: To investigate the anti-hyperuricemic effect of Dioscorea tokoro Makino extract (DTME) in potassium oxonate-induced hyperuricemic mice. Method: The effect of DTME was investigated in the hyperuricemic mice induced by potassium oxonate. DTME. The extract was administered to the mice daily at doses of 220, 440 and 880 mg/kg for 10 days; allopurinol (5 mg/kg) was given as positive control. Serum and urine levels of uric acid and creatinine were determined by colorimetric method. Simultaneously, protein levels of urate transporter 1 (URAT1) and organic anion transporter 1 (OAT1) in the rat kidney were analyzed by Western blotting. Results: Compared with control, a high dose of DTME inhibited xanthine oxidase (XOD) activity in both serum (18.12 ± 1.33 U/L) and in liver (70.15 ± 5.20 U/g protein) (p < 0.05); decreased levels of serum uric acid (2.04 ± 0.64 mg/L) (p < 0.05), serum creatinine (0.35 ± 0.18 μmol/L) and blood urea nitrogen (BUN) (8.83 ± 0.71 mmol/L) (p < 0.05). Furthermore, the extract increased levels of urine uric acid (38.34 ± 8.23 mg/L), urine creatinine (34.38 ± 1.98 mmol/L), down regulated of URAT1 and up regulated of OAT1 protein expressions (p < 0.05) in the renal tissue of hyperuricemic mice. Conclusion: DTME improves renal dysfunction in rats by regulating renal urate transporters in hyperuricemic rats. This may find therapeutic application in antihypertensive therapy.

PRODUCTION OF BIOFUEL INTERMEDIATES FROM WOODY FEEDSTOCKS VIA FAST PYROLYSIS AND TORREFACTION

The main objective of this research was to investigate pyrolysis and torrefaction of forest biomass species using a micropyrolysis instrument. It was found that 30-45% of the original sample mass remained as bio-char in the pyrolysis temperature range of 500 - 700˚C for aspen, balsam, and switchgrass. The non-char mass was converted to gaseous and vapor products, of which 10-55% was water and syngas, 2-12% to acetic acid, 2-12% to hydroxypropanone, 1-3% to furaldehyde, and 5-15% to various phenolic compounds. In addition, several general trends in the evolution of gaseous species were indentified when woody feedstocks were pyrolyzed. With increasing temperature it was observed that: (1) the volume of gas produced increased, (2) the volume of CO2 decreased and the volumes of CO and CH4 increased, and (3) the rates of gas evolution increased. In the range of torrefaction temperature (200 - 300˚C), two mechanistic models were developed to predict the rates of CO2 and acetic acid product formation. The models fit the general trend of the experimental data well, but suggestions for future improvement were also noted. Finally, it was observed that using torrefaction as a pre-curser to pyrolysis improves the quality of bio-oil over traditional pyrolysis by reducing the acidity through removal of acetic acid, reducing the O/C ratio by removal of some oxygenated species, and removing a portion of the water.

Adsorption of pesticides onto activated carbons from wood composites

A series of activated carbon was produced from particleboard and medium-density fibreboard monoliths, which are waste originated from the industry, and then characterized and evaluated for potential application for phenoxyacetic acids removals, such 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxy acetic acid (MCPA) and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron), from the liquid phase. All AC retain the shape of the precursor, and displays a microporous structure well-developed, reaching 0.58 cm 3 g -1. The adsorption isotherms for three pesticides were obtained in the optimal conditions and the AC with high superficial area and micropore volume exhibited better performance, allowing to state that, this AC could be a great substitute of those habitually used for this purpose. The pesticides adsorption data were linearized using the Langmuir and Freundlich equation, being the first a very good fit to the experimental data.

Adsorption of pesticides onto activated carbons from wood composites

A series of activated carbon was produced from particleboard and medium-density fibreboard monoliths, which are waste originated from the industry, and then characterized and evaluated for potential application for phenoxyacetic acids removals, such 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxy acetic acid (MCPA) and 3-(3,4-dichlorophenyl)-1,1-dimethylurea (diuron), from the liquid phase. All AC retain the shape of the precursor, and displays a microporous structure well-developed, reaching 0.58 cm 3 g -1. The adsorption isotherms for three pesticides were obtained in the optimal conditions and the AC with high superficial area and micropore volume exhibited better performance, allowing to state that, this AC could be a great substitute of those habitually used for this purpose. The pesticides adsorption data were linearized using the Langmuir and Freundlich equation, being the first a very good fit to the experimental data.

Fumaric acid monoethyl ester-functionalized poly(D,L-Lactide)/N-vinyl-2- pyrrolidone Resins for the preparation of tissue engineering scaffolds by stereolithography

Polymer networks were prepared by photocross-linking fumaric acid monoethyl ester (FAME) functionalized, three-armed poly(D,L-lactide) oligomers using Af-vinyl-2-pyrrolidone (NVP) as diluent and comonomer. The use of NVP together with FAME-functionalized oligomers resulted in copolymerization at high rates, and networks with gel contents in excess of 90 were obtained. The hydrophilicity of the poly(D,L-lactide) networks increases with increasing amounts of NVP, networks containing 50 wt of NVP absorbed 40 of water. As the amount of NVP was increased from 30 to 50 wt , the Young's modulus after equilibration in water decreased from 0.8 to 0.2 GPa, as opposed to an increase from 1.5 to 2.1 GPa in the dry state. Mouse preosteoblasts readily adhered and spread onto all prepared networks. Using stereolithography, porous structures with a well-defined gyroid architecture were prepared from these novel materials. This allows the preparation of tissue engineering scaffolds with optimized pore architecture and tunable material properties.

A 1h And 13c Magnetic Resonance And Infrared Spectroscopic Study Of Coordinated 2-Aminocyclopentene-1-Dithiocarboxylic Acid And Its S-Methyl Ester

The ligating properties of 2-aminocyclopentene-1-dithiocarboxylic acid and its S-methyl esters were investigated. Complexes with Zn(II), Cd(II) and Hg(II) halides were synthesized and characterized by infrared and proton and carbon-13 NMR studies. The results are concordant with a bidentate coordination of the -CS2 group to the metal ions

Synthesis and characterization of hyperbranched poly(ester-amide)s based on gallic acid and DL-2-aminobutyric acid

A novel AB(3)-type monomer was prepared from gallic acid and DL-2-aminobutyric acid, and used for the synthesis of the biocompatible hyperbranched poly(ester-amide)s by self-polycondensation. The polymers were characterized via FTIR and NMR spectroscopy and thermal analysis, and the average degree of branching of the polymers was estimated to be 0.75. The polymers with abundant acetyl end groups were found to be amorphous with lower intrinsic viscosity, better thermal stability and excellent solubility.