O universo ficcional de Julien Gracq: formas, sentidos e mecanismos do imaginário

Universidade da Madeira

Relações entre mecanismos de coordenação e controle com desempenho organizacional: um estudo nas instituições públicas de ensino médio de Natal

This research aimed at relating coordination and control forms to organizational performance. The multicase study was applied in two public high schools: Centro Federal de Educação Tecnológica do Rio Grande do Norte and Floriano Cavalcanti. In order to accomplish these objectives, it was developed a qualitative analysis and considered coordination and control forms of several authors. Also was considered Sander´s (1984) model of organizational performance. The mentioned model considers two criteria to analyze organizational performance: one instrumental (efficiency and efficacy) and other substantive (effectiveness e relevance). The research attempts to show the importance of balancing these criteria in a way that effectiveness and relevance becomes more important at schools. It was proven that the use of bureaucratic coordination forms has the power to influence the evaluation on the instrumental technique. At the same time, it was observed that the use of mechanisms based on the autonomy of the school is related to efficiency and efficacy. The object of this research can be considered successful

Modelagem matemática para o transporte de partículas sujeitas a múltiplos mecanismos de retenção

Discrepancies between classical model predictions and experimental data for deep bed filtration have been reported by various authors. In order to understand these discrepancies, an analytic continuum model for deep bed filtration is proposed. In this model, a filter coefficient is attributed to each distinct retention mechanism (straining, diffusion, gravity interception, etc.). It was shown that these coefficients generally cannot be merged into an effective filter coefficient, as considered in the classical model. Furthermore, the derived analytic solutions for the proposed model were applied for fitting experimental data, and a very good agreement between experimental data and proposed model predictions were obtained. Comparison of the obtained results with empirical correlations allowed identifying the dominant retention mechanisms. In addition, it was shown that the larger the ratio of particle to pore sizes, the more intensive the straining mechanism and the larger the discrepancies between experimental data and classical model predictions. The classical model and proposed model were compared via statistical analysis. The obtained p values allow concluding that the proposed model should be preferred especially when straining plays an important role. In addition, deep bed filtration with finite retention capacity was studied. This work also involves the study of filtration of particles through porous media with a finite capacity of filtration. It was observed, in this case, that is necessary to consider changes in the boundary conditions through time evolution. It was obtained a solution for such a model using different functions of filtration coefficients. Besides that, it was shown how to build a solution for any filtration coefficient. It was seen that, even considering the same filtration coefficient, the classic model and the one here propposed, show different predictions for the concentration of particles retained in the porous media and for the suspended particles at the exit of the media

Semeadora-adubadora: mecanismos de corte de palha e cargas verticais aplicadas

This work had as objective to evaluate the performance of mechanisms of cutting of the no-tillage seedrills in different vegetable coverings and applied vertical loads. The experimental design used was in randomized blocks and factorial scheme 3 x 4, with four replications. The trials were accomplished with three different mechanisms of culting of the straw (plane disc, corrugated disc and wavy disc), using four different vertical loads (750, 1500, 2250 and 3000 N). All treatments were accomplished in five straw coverings (corn, sorghum, triticale, black oats and radish). The results showed that larger the amount of dry matter covering the soil, higher the demand of horizontal and vertical forces. The wavy disc promotes the largest values of area of mobilized soil and requires large horizontal force, vertical force and horizontal force per area of cutting depth of discs (specific force). The treatment with plane disc required higher values of the horizontal forces per area of mobilized soil and of vertical force in the corn and sorghum coverings.

Resistência e mecanismos envolvidos em genótipos de milho em relação ao ataque do gorgulho, Sitophilus zeamais Mots. (Coleoptera: Curculionidae)

A resistência de 30 genótipos de milho ao ataque de Sitophilus zeamais Mots. foi avaliada em teste sem chance de escolha, sendo efetuada uma seleção de 10 deles (M 9560, XHT 12, A 952, AG 5011, X 9557, Z 8452, C 615, C 435, DINA 888, C 606), os quais foram submetidos ao teste com chance de escolha, avaliando-se a atratividade e a preferência para oviposição. Pelos resultados concluiu-se que os genótipos menos atrativos foram Z 8452 (3,1%) e M 9560 (3,2%), enquanto o mais atrativo foi C 615 (24,7%). Os genótipos que apresentaram resistência do tipo não-preferência para oviposição foram A 952, M 9560 e XHT 12 com números médios de 2,0; 3,0 e 3,4 ovos por recipiente. A resistência do tipo não-preferência para alimentação e/ou antibiose foi observada nos genótipos M 9560, A 952 e Z 8452. Os genótipos com alta suscetibilidade ao gorgulho foram C 435, C 444, C 606 e AG 8010.

Mecanismos sócio-genéticos da representação social de trabalho docente por grupos de licenciandos de física e de química da Universidade Federal do Rio Grande do Norte

This research aims to understand the social representations Teaching Work in groups of undergraduate students of Physics and Chemistry of the Federal University of Rio Grande do Norte. For this, the proposal was based on the three theoretical and methodological consensus Carvalho (2012) in the explanation of socio-genetic mechanisms constituents of dynamic consensus that has functionality to your organization. It Was used to achieve this goal, the theoretical-epistemological Serge Moscovici (1978, 2003), Jodelet (2011), Wagner (1998,( 2011) and Carvalho (2012). The corpus analyzed results from a qualitative and quantitative research, developed in three stages. The first two (2) questionnaires to fifty (50) of each undergraduate course, a questionnaire and another profile for collection of free associations concerning motes inductors "Give Lesson," "Student" and "Teacher". The second step in the procedure Multiple Classifications, Roazzi (1995), aimed for another thirty (30) undergraduate students for each course, as well as Document Analysis of Educational Projects Curriculum courses in Physics and Chemistry. The data analysis of the first stage focused on descriptive statistics and frequency and average order of the words associated with motes inductors. The results from the Multiple Classification Procedure submitted to multidimensional analysis (MSA multidimensional scalogram analysis) and SSA (Similarity Structure Analysis), were interpreted by the theoretical and methodological proposal of the three consensus, supported by analysis of the rhetorical nature of justifications classifications and categorizations of words, boosted in times of application of Procedure Multiple Classification. The data revealed that the groups surveyed were the same Social Representation with specific dynamic consensual. Thinking Teaching Work for these groups it is considered in three dimensions: the BE-DO-HAVE of teaching. In the group of Physics consensus was clear semantic, which expressed a dynamic in which the interpretations of "Teaching Work" peacefully coexist on perceptions of two concepts: An identity around the "BE" "Teacher" or "BE" "Educator" and the other, how they think about professional development. The type of group consensus Chemistry pointed to a consensual logic hierarchical order in which the gradual between the elements of BE-DO-HAVE attested conflicts and disagreements about the perceptual object "Teaching Work", around what value most, whether they are the attributes of personal or professional-technical dimension of teaching, in the course of professional development. The thesis to explain the mechanisms of socio-genetic Representation Social Teaching Work by theoretical and methodological proposal was confirmed

Discondroplasia tibial: mecanismos de lesão e controle

A discondroplasia tibial (DT) é atribuída a uma assincronia no processo de diferenciação dos condrócitos, levando à formação de uma camada de condrócitos pré-hipertróficos e de uma cartilagem na tíbia proximal que não é calcificada, mas é resistente à invasão vascular. Além disso, tem sido proposto que, na discondroplasia tíbial, a etapa final do processo de calcificação não ocorre devido ao fato de que os efetores de alguns genes, relacionados com o mecanismo de calcificação do disco de crescimento podem apresentar algumas de suas propriedades químicas ou biológicas alteradas e/ou não serem expressos. Nesse sentido, a compreensão do mecanismo de ação e o papel das biomoléculas e dos minerais relacionados com a discondroplasia tibial poderão contribuir para o conhecimento de doenças do tecido ósseo e estabelecer estratégias de prevenção e tratamento.

Os conselhos como mecanismos de democratização da política educacional :participação e poder de decisão nas ações do Conselho de Controle Social do FUNDEF no município de Parnamirim/RN

This study board the FUNDEF social control council implementation in Parnamirim/RN city, concerning their representatives participation in the accompaniment (decision power) in resort, in front of governmental politics of decentralization, unleashed in 90´s, seen in decentralization process needs the society participation in decisions of educative institutions and represent an efficient way of solve the problems difficult the educational management actions. For this, the council creation of Brazil manager configure, since the 80´s, detaching, and the single characterizing, in actual context. The objective is raise pertinent questions of thematic of representatives members participation of collegiate organs, evidencing the decision power of these, in public resource control. The theory-methodological referential the literature treat the participation and power decision of FUNDEF social control decision, such as politics directrix that rules this council. It utilizes as proceeding of collecting data the semi-structured interview and analyze of meeting register to understand the empirics of council implantation in this city, in view of that the electoral process configured in 2003, showed as a innovation, because the counselor is indicated by the local public power representatives (in this case the education municipal secretary). The research result show the representatives have difficult, to accompany the FUNDEF resources amount, particularly in concern in the financial resources (ratio) over plus. Finally, emphasize the importance of democratization in the relations between the state and civil society, elucidating and exciting reflections a: democratic participation in control of public recourses for education, educational management and civil society mobilization in access of public and cultural cash which the citizen has rights

Mecanismos de segurança para um sistema cooperativo de armazenamento de arquivos baseado em P2P

Previous works have studied the characteristics and peculiarities of P2P networks, especially security information aspects. Most works, in some way, deal with the sharing of resources and, in particular, the storage of files. This work complements previous studies and adds new definitions relating to this kind of systems. A system for safe storage of files (SAS-P2P) was specified and built, based on P2P technology, using the JXTA platform. This system uses standard X.509 and PKCS # 12 digital certificates, issued and managed by a public key infrastructure, which was also specified and developed based on P2P technology (PKIX-P2P). The information is stored in a special file with XML format which is especially prepared, facilitating handling and interoperability among applications. The intention of developing the SAS-P2P system was to offer a complementary service for Giga Natal network users, through which the participants in this network can collaboratively build a shared storage area, with important security features such as availability, confidentiality, authenticity and fault tolerance. Besides the specification, development of prototypes and testing of the SAS-P2P system, tests of the PKIX-P2P Manager module were also performed, in order to determine its fault tolerance and the effective calculation of the reputation of the certifying authorities participating in the system

Gráficos de probabilidade normal para avaliação de mecanismos de distribuição de sementes em semeadoras

Currently great emphasis is given for seed metering that assist rigorous demands in relation to longitudinal distribution of seeds, as well as to the index of fails in spacing laws, breaks and double seeds. The evaluation of these variable demands much time and work of attainment of data and processing. The objective of this work went propose to use of graphs of normal probability, facilitating the treatment of the data and decreasing the time of processing. The evaluation methodology consists in the counting of broken seeds, fail spacing and double seeds through the measure of the spacing among seeds, preliminary experiments through combinations of treatments had been carried through whose factors of variation were the level of the reservoir of seeds, the leveling of the seed metering, the speed of displacement and dosage of seeds. The evaluation was carried through in two parts, first through preliminary experiments for elaboration of the graphs of normal probability and later in experiments with bigger sampling for evaluation of the influence of the factors most important. It was done the evaluation of seed metering of rotating internal ring, and the amount of necessary data for the evaluation was very decreased through of the graphs of normal probability that facilitated to prioritize only the significant factors. The dosage of seeds was factor that more important because factor (D) have greater significance.

Mecanismos de desgaste, história térmica e ciclo de vida de componentes de um motor de combustão interna de aeromodelo

We developed an assay methodology that considered the temperature variation and the scanning electron microscopy as a method to quantify and characterize respectively the consumption evolution in three 46 LA machines, with internal combustion and two-stroke engines, 7.64 cm3 cylinder capacity, 23.0 millimeters diameter and 18.4 millimeters course, RPM service from 2.000 to 16.000 rpm, 1.2 HP power, and 272 grams weight. The investigated engines components were: (1) head of the engine (Al-Si alloy), (2) piston (Al-Si alloy) and (3) piston pin (AISI 52100 steel). The assays were carried out on a desktop; engines 1 and 2 were assayed with no load, whereas in two assays of engine 3 we added a fan with wind speed that varied from 8.10 m/s to 11.92 m/s, in order to identify and compare the engine dynamic behavior as related to the engines assayed with no load. The temperatures of the engine s surface and surroundings were measured by two type K thermopairs connected to the assay device and registered in a microcomputer with data recording and parameters control and monitoring software, throughout the assays. The consumed surface of the components was analyzed by scanning electron microscopy (SEM) and microanalysis-EDS. The study was complemented with shape deformation and mass measurement assays. The temperature variation was associated with the oxides morphology and the consumption mechanisms were discussed based on the relation between the thermal mechanical effects and the responses of the materials characterization

Mecanismos de desgaste de poliuretano em ensaios de microabrasão

Wear mechanisms and thermal history of two non-conforming sliding surfaces was investigated in laboratory. A micro-abrasion testing setup was used but the traditional rotative sphere method was substituted by a cylindrical surface of revolution which included seven sharp angles varying between 15o to 180o. The micro-abrasion tests lead to the investigation on the polyurethane response at different contact pressures. For these turned counterfaces with and without heat treatment. Normal load and sliding speeds were changed. The sliding distance was fixed at 5 km in each test. The room and contact temperatures were measured during the tests. The polyurethane was characterized using tensile testing, hardness Shore A measurement, Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Thermomechanical Analyze (TMA). The Vickers micro-hardness of the steel was measured before and after the heat treatment and the metallographic characterization was also carried out. Worn surface of polyurethane was analysed using Scanning Electron Microscope (SEM) and EDS (Electron Diffraction Scanning) microanalyses. Single pass scratch testing in polyurethane using indenters with different contact angles was also carried out. The scar morphology of the wear, the wear mechanism and the thermal response were analyzed in order to correlate the conditions imposed by the pressure-velocity pair to the materials in contact. Eight different wear mechanisms were identified on the polyurethane surface. It was found correlation between the temperature variation and the wear scar morphology.