Simulation of academic performance rates, estimation of indicators of subjects and of a complete degree

The purpose of this paper is to present a program written in Matlab-Octave for the simulation of the time evolution of student curricula, i.e, how students pass their subjects along time until graduation. The program computes, from the simulations, the academic performance rates for the subjects of the study plan for each semester as well as the overall rates, which are a) the efficiency rate defined as the ratio of the number of students passing the exam to the number of students who registered for it and b) the success rate, defined as the ratio of the number of students passing the exam to the number of students who not only registered for it but also actually took it. Additionally, we compute the rates for the bachelor academic degree which are established for Spain by the National Quality Evaluation and Accreditation Agency (ANECA) and which are the graduation rate (measured as the percentage of students who finish as scheduled in the plan or taking an extra year) and the efficiency rate (measured as the percentage of credits which a student who graduated has really taken). The simulation is done in terms of the probabilities of passing all the subjects in their study plan. The application of the simulator to Polytech students in Madrid, where requirements for passing are specially stiff in first and second year subjects, is particularly relevant to analyze student cohorts and the probabilities of students finishing in the minimum of four years, or taking and extra year or two extra years, and so forth. It is a very useful tool when designing new study plans. The calculation of the probability distribution of the random variable "number of semesters a student has taken to complete the curricula and graduate" is difficult or even unfeasible to obtain analytically, and this is even truer when we incorporate uncertainty in parameter estimation. This is why we apply Monte Carlo simulation which not only provides illustration of the stochastic process but also a method for computation. The stochastic simulator is proving to be a useful tool for identification of the subjects most critical in the distribution of the number of semesters for curriculum vitae (CV) completion and subsequently for a decision making process in terms of CV planning and passing standards in the University. Simulations are performed through a graphical interface where also the results are presented in appropriate figures. The Project has been funded by the Call for Innovation in Education Projects of Universidad Politécnica de Madrid (UPM) through a Project of its school Escuela Técnica Superior de Ingenieros Industriales ETSII during the period September 2010-September 2011.

Indicators and Estimators in P-Adaptive Boundary Elements

The paper presents the possibility of implementing a p-adaptive process with the B.E.M. Although the exemples show that good results can be obtained with a limited amount of storage and with the simple ideas explained above, more research is needed in order to improve the two main problems of the method, i.e.: the criteria of where to refine and until what degree. Mathematically based reasoning is still lacking and will be useful to simplify the decission making. Nevertheless the method seems promising and, we hope, opens a path for a series of research lines of maximum interest. Although the paper has dealt only with plane potential problem the extension to plane elasticity as well as to 3-D potential problem is straight-forward.

A new ultrasonic signal amplification method for detection bacteria

A new method is presented that increases the sensitivity of ultrasound-based techniques for detection of bacteria. The technique was developed for the detection of catalase-positive microorganisms. It uses a bubble trapping medium containing hydrogen peroxide that is mixed with the sample for microbiological evaluation. The enzyme catalase is present in catalase-positive bacteria, which induces a rapid hydrolysis of hydrogen peroxide, forming bubbles which remain in the medium. This reaction results in the amplification of the mechanical changes that the microorganisms produce in the medium. The effect can be detected by means of ultrasonic wave amplitude continuous measurement since the bubbles increase the ultrasonic attenuation significantly. It is shown that microorganism concentrations of the order of 105 cells ml−1 can be detected using this method. This allows an improvement of three orders of magnitude in the ultrasonic detection threshold of microorganisms in conventional culture media, and is competitive with modern rapid microbiological methods. It can also be used for the characterization of the enzymatic activity.

Rapid microbiological detection method based on ultrasonic instrumentation

Los métodos de detección rápida de microorganismos se están convirtiendo en una herramienta esencial para el control de calidad en el área de la biotecnología, como es el caso de las industrias de alimentos y productos farmacéuticos y bioquímicos. En este escenario, el objetivo de esta tesis doctoral es desarrollar una técnica de inspección rápida de microoganismos basada en ultrasonidos. La hipótesis propuesta es que la combinación de un dispositivo ultrasónico de medida y un medio líquido diseñado específicamente para producir y atrapar burbujas, pueden constituir la base de un método sensible y rápido de detección de contaminaciones microbianas. La técnica presentada es efectiva para bacterias catalasa-positivas y se basa en la hidrólisis del peróxido de hidrógeno inducida por la catalasa. El resultado de esta reacción es un medio con una creciente concentración de burbujas. Tal medio ha sido estudiado y modelado desde el punto de vista de la propagación ultrasónica. Las propiedades deducidas a partir del análisis cinemático de la enzima se han utilizado para evaluar el método como técnica de inspección microbiana. En esta tesis, se han investigado aspectos teóricos y experimentales de la hidrólisis del peróxido de hidrógeno. Ello ha permitido describir cuantitativamente y comprender el fenómeno de la detección de microorganismos catalasa-positivos mediante la medida de parámetros ultrasónicos. Más concretamente, los experimentos realizados muestran cómo el oxígeno que aparece en forma de burbujas queda atrapado mediante el uso de un gel sobre base de agar. Este gel fue diseñado y preparado especialmente para esta aplicación. A lo largo del proceso de hidrólisis del peróxido de hidrógeno, se midió la atenuación de la onda y el “backscattering” producidos por las burbujas, utilizando una técnica de pulso-eco. Ha sido posible detectar una actividad de la catalasa de hasta 0.001 unidades/ml. Por otra parte, este estudio muestra que por medio del método propuesto, se puede lograr una detección microbiana para concentraciones de 105 células/ml en un periodo de tiempo corto, del orden de unos pocos minutos. Estos resultados suponen una mejora significativa de tres órdenes de magnitud en comparación con otros métodos de detección por ultrasonidos. Además, la sensibilidad es competitiva con modernos y rápidos métodos microbiológicos como la detección de ATP por bioluminiscencia. Pero sobre todo, este trabajo muestra una metodología para el desarrollo de nuevas técnicas de detección rápida de bacterias basadas en ultrasonidos. ABSTRACT In an industrial scenario where rapid microbiological methods are becoming essential tools for quality control in the biotechnological area such as food, pharmaceutical and biochemical; the objective of the work presented in this doctoral thesis is to develop a rapid microorganism inspection technique based on ultrasounds. It is proposed that the combination of an ultrasonic measuring device with a specially designed liquid medium, able to produce and trap bubbles could constitute the basis of a sensitive and rapid detection method for microbial contaminations. The proposed technique is effective on catalase positive microorganisms. Well-known catalase induced hydrogen peroxide hydrolysis is the fundamental of the developed method. The physical consequence of the catalase induced hydrogen peroxide hydrolysis is an increasingly bubbly liquid medium. Such medium has been studied and modeled from the point of view of ultrasonic propagation. Properties deduced from enzyme kinematics analysis have been extrapolated to investigate the method as a microbial inspection technique. In this thesis, theoretical and experimental aspects of the hydrogen peroxide hydrolysis were analyzed in order to quantitatively describe and understand the catalase positive microorganism detection by means of ultrasonic measurements. More concretely, experiments performed show how the produced oxygen in form of bubbles is trapped using the new gel medium based on agar, which was specially designed for this application. Ultrasonic attenuation and backscattering is measured in this medium using a pulse-echo technique along the hydrogen peroxide hydrolysis process. Catalase enzymatic activity was detected down to 0.001 units/ml. Moreover, this study shows that by means of the proposed method, microbial detection can be achieved down to 105 cells/ml in a short time period of the order of few minutes. These results suppose a significant improvement of three orders of magnitude compared to other ultrasonic detection methods for microorganisms. In addition, the sensitivity reached is competitive with modern rapid microbiological methods such as ATP detection by bioluminescence. But above all, this work points out a way to proceed for developing new rapid microbial detection techniques based on ultrasound.

Indicators of sustainability of agriculture and livestock in Spain - Indicadores de sostenibilidad de la agricultura y ganadería española

Sustainability is an adjective used to characterize agriculture according to the degree of fulfillment of goals. Those goals are related to agro-ecological, environmental and socio-economic dimensions. Sustainability is a dynamic and temporal character. In absolute terms there is not an ending value because it changes as its dimensions make it. Spain is one of the main agricultural countries of the European Union both in terms of crop land and value of productions. The object of this study is to present a methodology of sustainability account to be incorporated into national statistical and to assess their performance in the course of the years. For that reason the data sources used have been the statistics of the Department of Agriculture and from others database. We presented a set of indicators of sustainability and its evaluation in a time series of at least 30 years. The trend analysis offers the evolution of the numerical values of the indicators in terms of efficiency, physical units used for a unit of product or its value in euros. The analyzed crops have been: wheat, barley, maize, sunflower, sugar beet, wine grape, olive oil, citrus, melon and tomato. Physical indicators were: land, water, energy, erosion, soil organic matter, and carbon balance; socio-economic indicators were: agricultural final production, prices, income, employment and use of fertilizers. In general, all crops increased their productive efficiency, higher in irrigated than on dry land. Spanish agricultural carbon sequestration capacity has multiplied by five in the last seventy years, as a result of the increase in the productivity of crops, in terms of total biomass and the modification of the soil management techniques. Livestock sector presents data of pork, broilers and laying hen. Those showed an improvement in efficiency and economic indicators. Overall we can say that Spanish agriculture and livestock subsector have a tendency towards sustainability, being its main threats extreme meteorological factors and the instability of todays markets.

A multi-criteria optimization and decision-making approach for improvement of food engineering processes.

The objective of this study was to propose a multi-criteria optimization and decision-making technique to solve food engineering problems. This technique was demostrated using experimental data obtained on osmotic dehydratation of carrot cubes in a sodium chloride solution. The Aggregating Functions Approach, the Adaptive Random Search Algorithm, and the Penalty Functions Approach were used in this study to compute the initial set of non-dominated or Pareto-optimal solutions. Multiple non-linear regression analysis was performed on a set of experimental data in order to obtain particular multi-objective functions (responses), namely water loss, solute gain, rehydration ratio, three different colour criteria of rehydrated product, and sensory evaluation (organoleptic quality). Two multi-criteria decision-making approaches, the Analytic Hierarchy Process (AHP) and the Tabular Method (TM), were used simultaneously to choose the best alternative among the set of non-dominated solutions. The multi-criteria optimization and decision-making technique proposed in this study can facilitate the assessment of criteria weights, giving rise to a fairer, more consistent, and adequate final compromised solution or food process. This technique can be useful to food scientists in research and education, as well as to engineers involved in the improvement of a variety of food engineering processes.

A formalism and method for representing and reasoning with process models authored by subject matter experts

Enabling Subject Matter Experts (SMEs) to formulate knowledge without the intervention of Knowledge Engineers (KEs) requires providing SMEs with methods and tools that abstract the underlying knowledge representation and allow them to focus on modeling activities. Bridging the gap between SME-authored models and their representation is challenging, especially in the case of complex knowledge types like processes, where aspects like frame management, data, and control flow need to be addressed. In this paper, we describe how SME-authored process models can be provided with an operational semantics and grounded in a knowledge representation language like F-logic in order to support process-related reasoning. The main results of this work include a formalism for process representation and a mechanism for automatically translating process diagrams into executable code following such formalism. From all the process models authored by SMEs during evaluation 82% were well-formed, all of which executed correctly. Additionally, the two optimizations applied to the code generation mechanism produced a performance improvement at reasoning time of 25% and 30% with respect to the base case, respectively.

Evaluating alternative industrial network organizations and information systems

Purpose – The purpose of this paper is to present a simulation‐based evaluation method for the comparison of different organizational forms and software support levels in the field of supply chain management (SCM). Design/methodology/approach – Apart from widely known logistic performance indicators, the discrete event simulation model considers explicitly coordination cost as stemming from iterative administration procedures. Findings - The method is applied to an exemplary supply chain configuration considering various parameter settings. Curiously, additional coordination cost does not always result in improved logistic performance. Influence factor variations lead to different organizational recommendations. The results confirm the high importance of (up to now) disregarded dimensions when evaluating SCM concepts and IT tools. Research limitations/implications – The model is based on simplified product and network structures. Future research shall include more complex, real world configurations. Practical implications – The developed method is designed for the identification of improvement potential when SCM software is employed. Coordination schemes based only on ERP systems are valid alternatives in industrial practice because significant investment IT can be avoided. Therefore, the evaluation of these coordination procedures, in particular the cost due to iterations, is of high managerial interest and the method provides a comprehensive tool for strategic IT decision making. Originality/value – Reviewed literature is mostly focused on the benefits of SCM software implementations. However, ERP system based supply chain coordination is still widespread industrial practice but associated coordination cost has not been addressed by researchers.

Caracterización de ambientes sonoros en recintos universitarios: influencia del ruido sobre procesos cognitivos básicos

El interés por el estudio de la problemática del ruido en las escuelas y sus efectos sobre los estudiantes a nivel universitarios, es un tema que no ha sido estudiado debidamente. Desgraciadamente, en el ámbito educativo universitario, no existen regulaciones específicas que permitan determinar parámetros preventivos, ni procedimientos de evaluación de ruido dentro de este tipo de instalaciones educativas. Debido a la importancia de los efectos que el ruido tiene sobre la salud y la calidad de vida de los estudiantes universitarios, y consecuentemente en el rendimiento académico; es de suma importancia desarrollar mecanismos que estudien y planteen soluciones que ayuden a garantizar la mejora de la calidad de vida de la población estudiantil. En este trabajo se ha presentado un extenso trabajo que incluye el estudio de los ambientes sonoros a los que los estudiantes universitarios se ven expuestos día a día y se proponen acciones que ayudan a mejorar la calidad acústica en instalaciones educativas. Así mismo se evidencian los efectos que tiene este contaminante sobre la salud psicológica y por consecuencia en el desarrollo intelectual de los estudiantes. Por un lado, se incluye una propuesta de metodología que ayuda a la correcta caracterización de los ambientes sonoros en los cuales se desarrollan los estudiantes a nivel universitario. Esta se realizó haciendo un completo registro de los niveles sonoros durante sus actividades diarias. Así mismo, una encuesta fue aplicada a estudiantes para conocer la percepción que se tiene sobre las condiciones sonoras en ambientes universitarios. Así mismo, se realizó un estudio de la calidad sonora en instalaciones universitarias, el cual deriva la valoración de la molestia al ruido. Se propone una escala de valoración de molestia al ruido, la cual deriva el diseño de una propuesta con acciones de bajo coste frente al ruido. Por otro lado, se evidencian los trastornos que ocasiona este contaminante sobre la salud psicológica de los estudiantes y que afectan el desarrollo académico de estos. Se realizó primeramente la valoración de la atención y la memoria por medio de test psicométricos estandarizados y otros diseñados para este estudio en particular. Por último, con la finalidad de obtener datos objetivos y confiables que permitieron relacionar la influencia negativa del ruido de fondo sobre procesos cognitivos básicos como la atención y la memoria, se llevó a cabo un estudio de la actividad cerebral. Para llevar a cabo esta evaluación se utilizó como principal herramienta el electroencefalograma (EEG), enfocándose en los cambios producidos con y sin exposición a ruido de fondo, específicamente en las bandas de frecuencia relacionadas con procesos cognitivos básicos como los son la atención y la memoria, en este caso la banda theta (4-7 Hz) y la banda beta (13-30 Hz). ABSTRACT The interest in the study of the problem of noise in schools and its impact on students at university level is a topic that has not been properly studied. Unfortunately, there are no specific regulations for determining preventive parameters or noise assessment procedures in university facilities. Due to the importance of the effects that noise has on health and on the quality of life of university students, and consequently on academic performance; is very important to develop mechanisms to evaluate and design solutions that help ensure an improvement in the quality of life of the student population. This thesis has presented an extensive work, which includes the study of the state of the art on the problem of noise in the sound environments to which university students are exposed every day, and the effects on students mainly on attention aspects. On one hand, a general study of the common noise environments of life of university students was carried out, where a methodological proposal is included and that helps in the correct characterization of the sound environments in which university students grow. This proposal includes the assessment of noise exposure, noise dose and a recording of the characteristic sound levels during their daily activities in and out spaces dedicated to their education. Also, a survey was conducted to know the perception that students have on noise conditions in university environments. Also, a method for evaluation of the noise annoyance is proposed, this is through the correlation of two known methods of evaluation. The first method is based on psychoacoustic parameters that allow the evaluation of the sound quality. These parameters were related, obtaining as a result the parameter known as psychoacoustics annoyance. The second method is based on a questionnaire in conjunction with listening tests in specific sound environments. Derived from the correlation of these two methods, a series of indicators of noise annoyance are proposed, which entails the design of a noise annoyance indicator. Furthermore, the effects of this pollutant on psychological health and therefore in the intellectual development of students has been shown. First, an evaluation of attention and memory using standardized psychometric tests were performed and others designed for this particular study. Because it has been evidenced that the use of these psychometric tests are not very reliable, we sought to obtain another objective and reliable data to show the relationship between the negative influence of background noise on basic cognitive processes such as attention and memory. This was achieved by carrying out a study of the brain activity. To carry out this evaluation the electroencephalogram (EEG) was used as the main tool, focusing on the changes produced with and without exposure to background noise, specifically in the frequency bands related to basic cognitive processes such as attention and are memory. In this case the band theta (4-7 Hz) and beta band (13-30 Hz) were studied. The purpose of this thesis is to establish the bases for future studies that allow go deep in the study of the sound conditions in school environments, and enable the design of strategies and measures against noise and the correct evaluation of the effects of noise on aspects for improving the psychological quality of life and academic performance of students.

Comparison of Airborne Laser Scanning Methods for Estimating Forest Structure Indicators Based on Lorenz Curves

The purpose of this study was to compare a number of state-of-the-art methods in airborne laser scan- ning (ALS) remote sensing with regards to their capacity to describe tree size inequality and other indi- cators related to forest structure. The indicators chosen were based on the analysis of the Lorenz curve: Gini coefficient ( GC ), Lorenz asymmetry ( LA ), the proportions of basal area ( BALM ) and stem density ( NSLM ) stocked above the mean quadratic diameter. Each method belonged to one of these estimation strategies: (A) estimating indicators directly; (B) estimating the whole Lorenz curve; or (C) estimating a complete tree list. Across these strategies, the most popular statistical methods for area-based approach (ABA) were used: regression, random forest (RF), and nearest neighbour imputation. The latter included distance metrics based on either RF (NN–RF) or most similar neighbour (MSN). In the case of tree list esti- mation, methods based on individual tree detection (ITD) and semi-ITD, both combined with MSN impu- tation, were also studied. The most accurate method was direct estimation by best subset regression, which obtained the lowest cross-validated coefficients of variation of their root mean squared error CV(RMSE) for most indicators: GC (16.80%), LA (8.76%), BALM (8.80%) and NSLM (14.60%). Similar figures [CV(RMSE) 16.09%, 10.49%, 10.93% and 14.07%, respectively] were obtained by MSN imputation of tree lists by ABA, a method that also showed a number of additional advantages, such as better distributing the residual variance along the predictive range. In light of our results, ITD approaches may be clearly inferior to ABA with regards to describing the structural properties related to tree size inequality in for- ested areas.

Developing ontologies for representing data about key performance indicators

Multiple indicators are of interest in smart cities at different scales and for different stakeholders. In open environments, such as The Web, or when indicator information has to be interchanged across systems, contextual information (e.g., unit of measurement, measurement method) should be transmitted together with the data and the lack of such information might cause undesirable effects. Describing the data by means of ontologies increases interoperability among datasets and applications. However, methodological guidance is crucial during ontology development in order to transform the art of modeling in an engineering activity. In the current paper, we present a methodological approach for modelling data about Key Performance Indicators and their context with an application example of such guidelines.

Development and improvement of protection-system algorithms for ground-fault detection and location in synchronous machines

Uno de los defectos más frecuentes en los generadores síncronos son los defectos a tierra tanto en el devanado estatórico, como de excitación. Se produce un defecto cuando el aislamiento eléctrico entre las partes activas de cualquiera de estos devanados y tierra se reduce considerablemente o desaparece. La detección de los defectos a tierra en ambos devanados es un tema ampliamente estudiado a nivel industrial. Tras la detección y confirmación de la existencia del defecto, dicha falta debe ser localizada a lo largo del devanado para su reparación, para lo que habitualmente el rotor debe ser extraído del estator. Esta operación resulta especialmente compleja y cara. Además, el hecho de limitar la corriente de defecto en ambos devanados provoca que el defecto no sea localizable visualmente, pues apenas existe daño en el generador. Por ello, se deben aplicar técnicas muy laboriosas para localizar exactamente el defecto y poder así reparar el devanado. De cara a reducir el tiempo de reparación, y con ello el tiempo en que el generador esta fuera de servicio, cualquier información por parte del relé de protección acerca de la localización del defecto resultaría de gran utilidad. El principal objetivo de esta tesis doctoral ha sido el desarrollo de nuevos algoritmos que permitan la estimación de la localización de los defectos a tierra tanto en el devanado rotórico como estatórico de máquinas síncronas. Respecto al devanado de excitación, se ha presentado un nuevo método de localización de defectos a tierra para generadores con excitación estática. Este método permite incluso distinguir si el defecto se ha producido en el devanado de excitación, o en cualquiera de los componentes del sistema de excitación, esto es, transformador de excitación, conductores de alimentación del rectificador controlado, etc. En caso de defecto a tierra en del devanado rotórico, este método proporciona una estimación de su localización. Sin embargo, para poder obtener la localización del defecto, se precisa conocer el valor de resistencia de defecto. Por ello, en este trabajo se presenta además un nuevo método para la estimación de este parámetro de forma precisa. Finalmente, se presenta un nuevo método de detección de defectos a tierra, basado en el criterio direccional, que complementa el método de localización, permitiendo tener en cuenta la influencia de las capacidades a tierra del sistema. Estas capacidades resultan determinantes a la hora de localizar el defecto de forma adecuada. En relación con el devanado estatórico, en esta tesis doctoral se presenta un nuevo algoritmo de localización de defectos a tierra para generadores que dispongan de la protección de faltas a tierra basada en la inyección de baja frecuencia. Se ha propuesto un método general, que tiene en cuenta todos los parámetros del sistema, así como una versión simplificada del método para generadores con capacidades a tierra muy reducida, que podría resultar de fácil implementación en relés de protección comercial. Los algoritmos y métodos presentados se han validado mediante ensayos experimentales en un generador de laboratorio de 5 kVA, así como en un generador comercial de 106 MVA con resultados satisfactorios y prometedores. ABSTRACT One of the most common faults in synchronous generators is the ground fault in both the stator winding and the excitation winding. In case of fault, the insulation level between the active part of any of these windings and ground lowers considerably, or even disappears. The detection of ground faults in both windings is a very researched topic. The fault current is typically limited intentionally to a reduced level. This allows to detect easily the ground faults, and therefore to avoid damage in the generator. After the detection and confirmation of the existence of a ground fault, it should be located along the winding in order to repair of the machine. Then, the rotor has to be extracted, which is a very complex and expensive operation. Moreover, the fact of limiting the fault current makes that the insulation failure is not visually detectable, because there is no visible damage in the generator. Therefore, some laborious techniques have to apply to locate accurately the fault. In order to reduce the repair time, and therefore the time that the generator is out of service, any information about the approximate location of the fault would be very useful. The main objective of this doctoral thesis has been the development of new algorithms and methods to estimate the location of ground faults in the stator and in the rotor winding of synchronous generators. Regarding the excitation winding, a new location method of ground faults in excitation winding of synchronous machines with static excitation has been presented. This method allows even to detect if the fault is at the excitation winding, or in any other component of the excitation system: controlled rectifier, excitation transformer, etc. In case of ground fault in the rotor winding, this method provides an estimation of the fault location. However, in order to calculate the location, the value of fault resistance is necessary. Therefore, a new fault-resistance estimation algorithm is presented in this text. Finally, a new fault detection algorithm based on directional criterion is described to complement the fault location method. This algorithm takes into account the influence of the capacitance-to-ground of the system, which has a remarkable impact in the accuracy of the fault location. Regarding the stator winding, a new fault-location algorithm has been presented for stator winding of synchronous generators. This algorithm is applicable to generators with ground-fault protection based in low-frequency injection. A general algorithm, which takes every parameter of the system into account, has been presented. Moreover, a simplified version of the algorithm has been proposed for generators with especially low value of capacitance to ground. This simplified algorithm might be easily implementable in protective relays. The proposed methods and algorithms have been tested in a 5 kVA laboratory generator, as well as in a 106 MVA synchronous generator with satisfactory and promising results.

Cartografía de QTL asociados a la tolerancia a estrés hídrico en frijol común (Phaseolus vulgaris L.)

Phaseolus vulgaris L. (frijol común o judía) es una leguminosa de gran demanda para la nutrición humana y un producto agrícola muy importante. Sin embargo, la producción de frijol se ve limitada por presiones ambientales como la sequía. En México, el 85% de la cosecha de frijol se produce en la temporada de primavera-verano, principalmente en las regiones del altiplano semiárido con una precipitación anual entre 250 y 400 mm. A pesar del implemento de tecnología en el campo, los factores naturales impiden al agricultor llegar a los rendimientos deseados. El Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP), como instituto de investigación gubernamental en México, tiene como objetivo la mejora de cultivos estratégicos, uno de ellos, P. vulgaris. Los estudios en relación a la sequía se enfocan especialmente en la selección de genotipos tolerantes, los cuales son sometidos en condiciones de estrés y monitoreando parámetros como el rendimiento y peso de semilla, además de algunos indicadores tales como índice de cosecha. El resultado de estos trabajos ha sido la obtención de variedades con mayor tolerancia a la sequía, tales como Pinto Villa y Pinto Saltillo. En los últimos años se ha avanzado notablemente en el conocimiento de las bases moleculares en las respuestas de las plantas al estrés. De acuerdo a diversos estudios se ha demostrado que las plantas bajo estrés por sequía experimentan cambios en la expresión de genes involucrados en la señalización, regulación de la transcripción y la traducción, transporte de agua y la función directa en la protección celular. También se ha observado que el déficit de agua es causado por las temperaturas extremas y la alta concentración de sales, por lo que al nivel molecular, las respuestas al estrés tienen puntos de especificidad y puntos de entrecruzamiento. La sequía puede generar estreses secundarios, tales como el nutricional, oxidativo y osmótico. Sin embargo, es necesario identificar y caracterizar muchos de los componentes involucrados en las respuestas al déficit hídrico, la caracterización de estos genes permitirá tener una mejor comprensión de los mecanismos bioquímicos y fisiológicos involucrados en la tolerancia al estrés. Actualmente, con el apoyo de la biología molecular se han identificado algunos genes que otorgan ventajas para la adaptación a ambientes desfavorables. Por lo que el objetivo del presente trabajo es identificar marcadores genéticos asociados a rasgos fenotípicos con énfasis a la tolerancia a estrés hídrico en P. vulgaris. Una vez establecidos los marcadores asociados al estrés hídrico, es factible considerar su uso para la selección asistida por marcadores en líneas o variedades de frijol de interés para los mejoradores. Se evaluaron 282 familias F3:5 derivadas de la cruza entre los cultivares Pinto Villa y Pinto Saltillo. Las familias se sembraron bajo un diseño simple de látice 17x17, el experimento se llevo acabo en el ciclo primavera-verano del 2010 y 2011, y otoñoinvierno de 2010 en el Campo Experimental Bajío del INIFAP con dos repeticiones para cada tratamiento de humedad (riego completo y sequía terminal). En todos los genotipos se realizó el fenotipado (variables fenotípicas) y el genotipado a través de marcadores moleculares. Los análisis estadísticos se basaron en el análisis de componentes principales (Eigen Analysis Selection Index Method, ESIM), la asociación entre marcadores SNP y el fenotipado (paquete SNPassoc para R) y el análisis de varianza (ANOVA). Los valores ESIM mostraron que las variables de Rendimiento, Días a floración, Días a madurez fisiológica e Índice de cosecha fueron sobresalientes en sequía terminal, por lo que se sugieren tomarse en consideración para los estudios de sequía en P. vulgaris como monitores de evaluación a la resistencia. Se identificaron nueve familias sobresalieron por sus valores ESIM (PV/PS6, 22, 131, 137, 149, 154, 201, 236 y 273), además de presentar valores superiores para el rendimiento en comparación con los parentales. Estos genotipos son candidatos interesantes para realizar estudios de identificación de loci asociados con la respuesta al estrés, y como potenciales parentales en el desarrollo de nuevas variedades de frijol. En los análisis de asociación SNPassoc se identificaron 83 SNPs significativos (p<0,0003) asociados a los rasgos fenotípicos, obteniendo un total de 222 asociaciones, de las cuales predomina el modelo genético de codominancia para las variables Días a floración, Periodo reproductivo y Biomasa total. Treinta y siete SNPs se identificaron a diferentes funciones biológicas a través del análisis de anotación funcional, de los cuales 12 SNPs (9, 18, 28, 39, 61, 69, 80, 106, 115, 128, 136 y 142) sobresalen por su asociación al fenotipado, y cuya anotación funcional indica que se encuentran en genes relacionados a la tolerancia a la sequía, tales como la actividad kinasa, actividad metabólica del almidón, carbohidratos y prolina, respuesta al estrés oxidativo, así como en los genes LEA y posibles factores de transcripción. En el caso de los análisis ANOVA, se identificaron 72 asociaciones entre los SNPs y las variables fenotípicas (F< 3,94E-04). Las 72 asociaciones corresponden a 30 SNPs y 7 variables fenotípicas, de las que predomina Peso de 100 semillas y Periodo reproductivo. Para los rasgos de Rendimiento, Índice de cosecha y Días a madurez fisiológica se presentaron asociaciones con seis SNPs (17, 34, 37, 50, 93 y 107), de los cuales, a los SNP37 y SNP107 fueron identificados a la anotación biológica de protein binding. Por otro lado, los SNP106 y SNP128 asociados al Periodo reproductivo, son genes con actividad kinasa y actividad metabólica del almidón, respectivamente. Para los marcadores tipo AFLP, se identificaron 271 asociaciones (F<2,34E-04). Las asociaciones corresponden a 86 AFLPs con todas las variables fenotípicas evaluadas, de las que predomina peso de 100 semillas, Días a floración y Periodo reproductivo. Debido a que los en los AFLPs no es posible determinar su anotación biológica, se proponen como marcadores potenciales relacionados a la resistencia a la sequía en frijol. Los AFLPs candidatos requieren más estudios tales como la secuenciación de los alelos respectivos, así como la identificación de éstas secuencias en el genoma de referencia y su anotación biológica, entre otros análisis, de esta manera podríamos establecer aquellos marcadores candidatos a la validación para la selección asistida. El presente trabajo propone tanto genotipos como marcadores genéticos, que deben ser validados para ser utilizados en el programa de mejoramiento de P. vulgaris, con el objetivo de desarrollar nuevas líneas o variedades tolerantes a la sequía. ABSTRACT Phaseolus vulgaris L. (common bean or judia) is a legume of great demand for human consumption and an important agricultural product. However, the common bean production is limited by environmental stresses, such as drought. In Mexico, 85% of the common bean crop is produced in the spring-summer season mainly in semiarid highland regions with a rainfall between 250 and 400 mm per year. In spite of the improvement of crop technology, the natural factors hamper getting an optimal yield. The National Institute for Forestry, Agriculture and Livestock (INIFAP) is a government research institute from Mexico, whose main objective is the genetic breeding of strategic crops, like P. vulgaris L. The drought tolerance studies particularly focus on the selection of bean tolerant genotypes, which are subjected to stress conditions, by means of monitoring parameters such as yield and seed weight, plus some agronomic indicators such as harvest index. The results of these works have led to obtain cultivars with higher drought tolerance such as Pinto Villa and Pinto Saltillo. Significant achievements have been recently made in understanding the molecular basis of stress plant responses. Several studies have shown that plants under drought stress present changes in gene expression related to cell signalling, transcriptional and translational regulation, water transport and cell protection. In addition, it has been observed that the extreme temperatures and high salt concentrations can cause a water deficiency so, at the molecular level, stress responses have specific and crossover points. The drought can cause secondary stresses, such as nutritional, oxidative and osmotic stress. It is required the identification of more components involved in the response to water deficit, the characterization of these genes will allow a better understanding of the biochemical and physiological mechanisms involved in stress tolerance. Currently, with the support of molecular biology techniques, some genes that confer an advantage for the crop adaptation to unfavourable environments have been identified. The objective of this study is to identify genetic markers associated with phenotypic traits with emphasis on water stress tolerance in P. vulgaris. The establishment of molecular markers linked to drought tolerance would make possible their use for marker-assisted selection in bean breeding programs. Two hundred and eighty two F3:5 families derived from a cross between the drought resistant cultivars Pinto Villa and Pinto Saltillo were evaluated. The families were sowed under a 17x17 simple lattice design. The experiment was conducted between spring-summer seasons in 2010 and 2011, and autumn-winter seasons in 2010 at the Bajio Experimental Station of INIFAP with two treatments (full irrigation and terminal drought). All families were phenotyped and genotyped using molecular markers. Statistical analysis was based on principal component analysis (Eigen Analysis Selection Index Method, ESIM), association analysis between SNP markers and phenotype (SNPassoc package R) and analysis of variance (ANOVA). The ESIM values showed that seed yield, days to flowering, days to physiological maturity and harvest index were outstanding traits in terminal drought treatment, so they could be considered as suitable parameters for drought-tolerance evaluation in P. vulgaris. Nine outstanding families for the ESIM values were identified (PV/PS6, 22, 131, 137, 149, 154, 201, 236 and 273), in addition, these families showed higher values for seed yield compared to the parental cultivars. These families are promising candidates for studies focused on the identification of loci associated to the stress response, and as potential parental cultivars for the development of new varieties of common bean. In the SNPassoc analysis, 83 SNPs were found significantly associated (p<0.0003) with phenotypic traits, obtaining a total of 222 associations, most of which involved the traits days to flowering, reproductive period and total biomass under a codominant genetic model. The functional annotation analysis showed 37 SNPs with different biological functions, 12 of them (9, 18, 28, 39, 61, 69, 80, 106, 115, 128, 136 and 142) stand out by their association to phenotype. The functional annotation suggested a connection with genes related to drought tolerance, such as kinase activity, starch, carbohydrates and proline metabolic processes, responses to oxidative stress, as well as LEA genes and putative transcription factors. In the ANOVA analysis, 72 associations between SNPs and phenotypic traits (F<3.94E- 04) were identified. All of these associations corresponded to 30 SNPs markers and seven phenotypic traits. Weight of 100 seeds and reproductive period were the traits with more associations. Seed yield, harvest index and days to physiological maturity were associated to six SNPs (17, 34, 37, 50, 93 and 107), the SNP37 and SNP107 were identified as located in protein binding genes. The SNP106 and SNP128 were associated with the reproductive period and belonged to genes with kinase activity and genes related to starch metabolic process, respectively. In the case of AFLP markers, 271 associations (F<2.34E-04) were identified. The associations involved 86 AFLPs and all phenotypic traits, being the most frequently associated weight of 100 seeds, days to flowering and reproductive period. Even though it is not possible to perform a functional annotation for AFLP markers, they are proposed as potential markers related to drought resistance in common bean. AFLPs candidates require additional studies such as the sequencing of the respective alleles, identification of these sequences in the reference genome and gene annotation, before their use in marker assisted selection. This work, although requires further validation, proposes both genotypes and genetic markers that could be used in breeding programs of P. vulgaris in order to develop new lines or cultivars with enhanced drought-tolerance.

A multidisciplinary reference framework to support innovative design, implementation and assessment of chronic care models

Hoy en día, por primera vez en la historia, la mayor parte de la población podrá vivir hasta los sesenta años y más (United Nations, 2015). Sin embargo, todavía existe poca evidencia que demuestre que las personas mayores, estén viviendo con mejor salud que sus padres, a la misma edad, ya que la mayoría de los problemas de salud en edades avanzadas están asociados a las enfermedades crónicas (WHO, 2015). Los sistemas sanitarios de los países desarrollados funcionan adecuadamente cuando se trata del cuidado de enfermedades agudas, pero no son lo suficientemente eficaces en la gestión de las enfermedades crónicas. Durante la última década, se han realizado esfuerzos para mejorar esta gestión, por medio de la utilización de estrategias de prevención y de reenfoque de la provisión de los servicios de atención para la salud (Kane et al. 2005). Según una revisión sistemática de modelos de cuidado de salud, comisionada por el sistema nacional de salud Británico, pocos modelos han conceptualizado cuáles son los componentes que hay que utilizar para proporcionar un cuidado crónico efectivo, y estos componentes no han sido suficientemente estructurados y articulados. Por lo tanto, no hay suficiente evidencia sobre el impacto real de cualquier modelo existente en la actualidad (Ham, 2006). Las innovaciones podrían ayudar a conseguir mejores diagnósticos, tratamientos y gestión de pacientes crónicos, así como a dar soporte a los profesionales y a los pacientes en el cuidado. Sin embargo, la forma en las que estas innovaciones se proporcionan no es lo suficientemente eficiente, efectiva y amigable para el usuario. Para mejorar esto, hace falta crear equipos de trabajo y estrategias multidisciplinares. En conclusión, hacen falta actividades que permitan conseguir que las innovaciones sean utilizadas en los sistemas de salud que quieren mejorar la gestión del cuidado crónico, para que sea posible: 1) traducir la “atención sanitaria basada en la evidencia” en “conocimiento factible”; 2) hacer frente a la complejidad de la atención sanitaria a través de una investigación multidisciplinaria; 3) identificar una aproximación sistemática para que se establezcan intervenciones innovadoras en el cuidado de salud. El marco de referencia desarrollado en este trabajo de investigación es un intento de aportar estas mejoras. Las siguientes hipótesis han sido propuestas: Hipótesis 1: es posible definir un proceso de traducción que convierta un modelo de cuidado crónico en una descripción estructurada de objetivos, requisitos e indicadores clave de rendimiento. Hipótesis 2: el proceso de traducción, si se ejecuta a través de elementos basados en la evidencia, multidisciplinares y de orientación económica, puede convertir un modelo de cuidado crónico en un marco descriptivo, que define el ciclo de vida de soluciones innovadoras para el cuidado de enfermedades crónicas. Hipótesis 3: es posible definir un método para evaluar procesos, resultados y capacidad de desarrollar habilidades, y asistir equipos multidisciplinares en la creación de soluciones innovadoras para el cuidado crónico. Hipótesis 4: es posible dar soporte al desarrollo de soluciones innovadoras para el cuidado crónico a través de un marco de referencia y conseguir efectos positivos, medidos en indicadores clave de rendimiento. Para verificar las hipótesis, se ha definido una aproximación metodológica compuesta de cuatro Fases, cada una asociada a una hipótesis. Antes de esto, se ha llevado a cabo una “Fase 0”, donde se han analizado los antecedentes sobre el problema (i.e. adopción sistemática de la innovación en el cuidado crónico) desde una perspectiva multi-dominio y multi-disciplinar. Durante la fase 1, se ha desarrollado un Proceso de Traducción del Conocimiento, elaborado a partir del JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare (Pearson, 2005), y sobre el cual se han definido cuatro Bloques de Innovación. Estos bloques consisten en una descripción de elementos innovadores, definidos en la fase 0, que han sido añadidos a los cuatros elementos que componen el modelo JBI. El trabajo llevado a cabo en esta fase ha servido también para definir los materiales que el proceso de traducción tiene que ejecutar. La traducción que se ha llevado a cabo en la fase 2, y que traduce la mejor evidencia disponible de cuidado crónico en acción: resultado de este proceso de traducción es la parte descriptiva del marco de referencia, que consiste en una descripción de un modelo de cuidado crónico (se ha elegido el Chronic Care Model, Wagner, 1996) en términos de objetivos, especificaciones e indicadores clave de rendimiento y organizada en tres ciclos de innovación (diseño, implementación y evaluación). Este resultado ha permitido verificar la segunda hipótesis. Durante la fase 3, para demostrar la tercera hipótesis, se ha desarrollado un método-mixto de evaluación de equipos multidisciplinares que trabajan en innovaciones para el cuidado crónico. Este método se ha creado a partir del método mixto usado para la evaluación de equipo multidisciplinares translacionales (Wooden, 2013). El método creado añade una dimensión procedural al marco. El resultado de esta fase consiste, por lo tanto, en una primera versión del marco de referencia, lista para ser experimentada. En la fase 4, se ha validado el marco a través de un caso de estudio multinivel y con técnicas de observación-participante como método de recolección de datos. Como caso de estudio se han elegido las actividades de investigación que el grupo de investigación LifeStech ha desarrollado desde el 2008 para mejorar la gestión de la diabetes, actividades realizadas en un contexto internacional. Los resultados demuestran que el marco ha permitido mejorar las actividades de trabajo en distintos niveles: 1) la calidad y cantidad de las publicaciones; 2) se han conseguido dos contratos de investigación sobre diabetes: el primero es un proyecto de investigación aplicada, el segundo es un proyecto financiado para acelerar las innovaciones en el mercado; 3) a través de los indicadores claves de rendimiento propuestos en el marco, una prueba de concepto de un prototipo desarrollado en un proyecto de investigación ha sido transformada en una evaluación temprana de una intervención eHealth para el manejo de la diabetes, que ha sido recientemente incluida en Repositorio de prácticas innovadoras del Partenariado de Innovación Europeo en Envejecimiento saludable y activo. La verificación de las 4 hipótesis ha permitido demonstrar la hipótesis principal de este trabajo de investigación: es posible contribuir a crear un puente entre la atención sanitaria y la innovación y, por lo tanto, mejorar la manera en que el cuidado crónico sea procurado en los sistemas sanitarios. ABSTRACT Nowadays, for the first time in history, most people can expect to live into their sixties and beyond (United Nations, 2015). However, little evidence suggests that older people are experiencing better health than their parents, and most of the health problems of older age are linked to Chronic Diseases (WHO, 2015). The established health care systems in developed countries are well suited to the treatment of acute diseases but are mostly inadequate for dealing with CDs. Healthcare systems are challenging the burden of chronic diseases by putting more emphasis on the prevention of disease and by looking for new ways to reorient the provision of care (Kane et al., 2005). According to an evidence-based review commissioned by the British NHS Institute, few models have conceptualized effective components of care for CDs and these components have been not structured and articulated. “Consequently, there is limited evidence about the real impact of any of the existing models” (Ham, 2006). Innovations could support to achieve better diagnosis, treatment and management for patients across the continuum of care, by supporting health professionals and empowering patients to take responsibility. However, the way they are delivered is not sufficiently efficient, effective and consumer friendly. The improvement of innovation delivery, involves the creation of multidisciplinary research teams and taskforces, rather than just working teams. There are several actions to improve the adoption of innovations from healthcare systems that are tackling the epidemics of CDs: 1) Translate Evidence-Based Healthcare (EBH) into actionable knowledge; 2) Face the complexity of healthcare through multidisciplinary research; 3) Identify a systematic approach to support effective implementation of healthcare interventions through innovation. The framework proposed in this research work is an attempt to provide these improvements. The following hypotheses have been drafted: Hypothesis 1: it is possible to define a translation process to convert a model of chronic care into a structured description of goals, requirements and key performance indicators. Hypothesis 2: a translation process, if executed through evidence-based, multidisciplinary, holistic and business-oriented elements, can convert a model of chronic care in a descriptive framework, which defines the whole development cycle of innovative solutions for chronic disease management. Hypothesis 3: it is possible to design a method to evaluate processes, outcomes and skill acquisition capacities, and assist multidisciplinary research teams in the creation of innovative solutions for chronic disease management. Hypothesis 4: it is possible to assist the development of innovative solutions for chronic disease management through a reference framework and produce positive effects, measured through key performance indicators. In order to verify the hypotheses, a methodological approach, composed of four Phases that correspond to each one of the stated hypothesis, was defined. Prior to this, a “Phase 0”, consisting in a multi-domain and multi-disciplinary background analysis of the problem (i.e.: systematic adoption of innovation to chronic care), was carried out. During phase 1, in order to verify the first hypothesis, a Knowledge Translation Process (KTP) was developed, starting from the JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare was used (Pearson, 2005) and adding Four Innovation Blocks. These blocks represent an enriched description, added to the JBI model, to accelerate the transformation of evidence-healthcare through innovation; the innovation blocks are built on top of the conclusions drawn after Phase 0. The background analysis gave also indication on the materials and methods to be used for the execution of the KTP, carried out during phase 2, that translates the actual best available evidence for chronic care into action: this resulted in a descriptive Framework, which is a description of a model of chronic care (the Chronic Care Model was chosen, Wagner, 1996) in terms of goals, specified requirements and Key Performance Indicators, and articulated in the three development cycles of innovation (i.e. design, implementation and evaluation). Thanks to this result the second hypothesis was verified. During phase 3, in order to verify the third hypothesis, a mixed-method to evaluate multidisciplinary teams working on innovations for chronic care, was created, based on a mixed-method used for the evaluation of Multidisciplinary Translational Teams (Wooden, 2013). This method adds a procedural dimension to the descriptive component of the Framework, The result of this phase consisted in a draft version of the framework, ready to be tested in a real scenario. During phase 4, a single and multilevel case study, with participant-observation data collection, was carried out, in order to have a complete but at the same time multi-sectorial evaluation of the framework. The activities that the LifeStech research group carried out since 2008 to improve the management of diabetes have been selected as case study. The results achieved showed that the framework allowed to improve the research activities in different directions: the quality and quantity of the research publications that LifeStech has issued, have increased substantially; 2 project grants to improve the management of diabetes, have been assigned: the first is a grant funding applied research while the second is about accelerating innovations into the market; by using the assessment KPIs of the framework, the proof of concept validation of a prototype developed in a research project was transformed into an early stage assessment of innovative eHealth intervention for Diabetes Management, which has been recently included in the repository of innovative practice of the European Innovation Partnership on Active and Health Ageing initiative. The verification of the 4 hypotheses lead to verify the main hypothesis of this research work: it is possible to contribute to bridge the gap between healthcare and innovation and, in turn, improve the way chronic care is delivered by healthcare systems.

Contribution to the improvement of communication services in nanosatellite constellations using delay and disruption tolerant networking based architectures

Esta tesis se desarrolla dentro del marco de las comunicaciones satelitales en el innovador campo de los pequeños satélites también llamados nanosatélites o cubesats, llamados así por su forma cubica. Estos nanosatélites se caracterizan por su bajo costo debido a que usan componentes comerciales llamados COTS (commercial off-the-shelf) y su pequeño tamaño como los Cubesats 1U (10cm*10 cm*10 cm) con masa aproximada a 1 kg. Este trabajo de tesis tiene como base una iniciativa propuesta por el autor de la tesis para poner en órbita el primer satélite peruano en mi país llamado chasqui I, actualmente puesto en órbita desde la Estación Espacial Internacional. La experiencia de este trabajo de investigación me llevo a proponer una constelación de pequeños satélites llamada Waposat para dar servicio de monitoreo de sensores de calidad de agua a nivel global, escenario que es usado en esta tesis. Es ente entorno y dadas las características limitadas de los pequeños satélites, tanto en potencia como en velocidad de datos, es que propongo investigar una nueva arquitectura de comunicaciones que permita resolver en forma óptima la problemática planteada por los nanosatélites en órbita LEO debido a su carácter disruptivo en sus comunicaciones poniendo énfasis en las capas de enlace y aplicación. Esta tesis presenta y evalúa una nueva arquitectura de comunicaciones para proveer servicio a una red de sensores terrestres usando una solución basada en DTN (Delay/Disruption Tolerant Networking) para comunicaciones espaciales. Adicionalmente, propongo un nuevo protocolo de acceso múltiple que usa una extensión del protocolo ALOHA no ranurado, el cual toma en cuenta la prioridad del trafico del Gateway (ALOHAGP) con un mecanismo de contienda adaptativo. Utiliza la realimentación del satélite para implementar el control de la congestión y adapta dinámicamente el rendimiento efectivo del canal de una manera óptima. Asumimos un modelo de población de sensores finito y una condición de tráfico saturado en el que cada sensor tiene siempre tramas que transmitir. El desempeño de la red se evaluó en términos de rendimiento efectivo, retardo y la equidad del sistema. Además, se ha definido una capa de convergencia DTN (ALOHAGP-CL) como un subconjunto del estándar TCP-CL (Transmission Control Protocol-Convergency Layer). Esta tesis muestra que ALOHAGP/CL soporta adecuadamente el escenario DTN propuesto, sobre todo cuando se utiliza la fragmentación reactiva. Finalmente, esta tesis investiga una transferencia óptima de mensajes DTN (Bundles) utilizando estrategias de fragmentación proactivas para dar servicio a una red de sensores terrestres utilizando un enlace de comunicaciones satelitales que utiliza el mecanismo de acceso múltiple con prioridad en el tráfico de enlace descendente (ALOHAGP). El rendimiento efectivo ha sido optimizado mediante la adaptación de los parámetros del protocolo como una función del número actual de los sensores activos recibidos desde el satélite. También, actualmente no existe un método para advertir o negociar el tamaño máximo de un “bundle” que puede ser aceptado por un agente DTN “bundle” en las comunicaciones por satélite tanto para el almacenamiento y la entrega, por lo que los “bundles” que son demasiado grandes son eliminados o demasiado pequeños son ineficientes. He caracterizado este tipo de escenario obteniendo una distribución de probabilidad de la llegada de tramas al nanosatélite así como una distribución de probabilidad del tiempo de visibilidad del nanosatélite, los cuales proveen una fragmentación proactiva óptima de los DTN “bundles”. He encontrado que el rendimiento efectivo (goodput) de la fragmentación proactiva alcanza un valor ligeramente inferior al de la fragmentación reactiva. Esta contribución permite utilizar la fragmentación activa de forma óptima con todas sus ventajas tales como permitir implantar el modelo de seguridad de DTN y la simplicidad al implementarlo en equipos con muchas limitaciones de CPU y memoria. La implementación de estas contribuciones se han contemplado inicialmente como parte de la carga útil del nanosatélite QBito, que forma parte de la constelación de 50 nanosatélites que se está llevando a cabo dentro del proyecto QB50. ABSTRACT This thesis is developed within the framework of satellite communications in the innovative field of small satellites also known as nanosatellites (<10 kg) or CubeSats, so called from their cubic form. These nanosatellites are characterized by their low cost because they use commercial components called COTS (commercial off-the-shelf), and their small size and mass, such as 1U Cubesats (10cm * 10cm * 10cm) with approximately 1 kg mass. This thesis is based on a proposal made by the author of the thesis to put into orbit the first Peruvian satellite in his country called Chasqui I, which was successfully launched into orbit from the International Space Station in 2014. The experience of this research work led me to propose a constellation of small satellites named Waposat to provide water quality monitoring sensors worldwide, scenario that is used in this thesis. In this scenario and given the limited features of nanosatellites, both power and data rate, I propose to investigate a new communications architecture that allows solving in an optimal manner the problems of nanosatellites in orbit LEO due to the disruptive nature of their communications by putting emphasis on the link and application layers. This thesis presents and evaluates a new communications architecture to provide services to terrestrial sensor networks using a space Delay/Disruption Tolerant Networking (DTN) based solution. In addition, I propose a new multiple access mechanism protocol based on extended unslotted ALOHA that takes into account the priority of gateway traffic, which we call ALOHA multiple access with gateway priority (ALOHAGP) with an adaptive contention mechanism. It uses satellite feedback to implement the congestion control, and to dynamically adapt the channel effective throughput in an optimal way. We assume a finite sensor population model and a saturated traffic condition where every sensor always has frames to transmit. The performance was evaluated in terms of effective throughput, delay and system fairness. In addition, a DTN convergence layer (ALOHAGP-CL) has been defined as a subset of the standard TCP-CL (Transmission Control Protocol-Convergence Layer). This thesis reveals that ALOHAGP/CL adequately supports the proposed DTN scenario, mainly when reactive fragmentation is used. Finally, this thesis investigates an optimal DTN message (bundles) transfer using proactive fragmentation strategies to give service to a ground sensor network using a nanosatellite communications link which uses a multi-access mechanism with priority in downlink traffic (ALOHAGP). The effective throughput has been optimized by adapting the protocol parameters as a function of the current number of active sensors received from satellite. Also, there is currently no method for advertising or negotiating the maximum size of a bundle which can be accepted by a bundle agent in satellite communications for storage and delivery, so that bundles which are too large can be dropped or which are too small are inefficient. We have characterized this kind of scenario obtaining a probability distribution for frame arrivals to nanosatellite and visibility time distribution that provide an optimal proactive fragmentation of DTN bundles. We have found that the proactive effective throughput (goodput) reaches a value slightly lower than reactive fragmentation approach. This contribution allows to use the proactive fragmentation optimally with all its advantages such as the incorporation of the security model of DTN and simplicity in protocol implementation for computers with many CPU and memory limitations. The implementation of these contributions was initially contemplated as part of the payload of the nanosatellite QBito, which is part of the constellation of 50 nanosatellites envisaged under the QB50 project.