Design, synthesis and evaluation of cyclothialidine analogues as DNA gyrase inhibitors

Cyclothialidine, a natural product isolated from Streptomyces .filipinensis NR0484, has been proven to be a potent and selective inhibitor of the bacterial enzyme DNA gyrase. Gyrase inhibition results in cell death, the enzyme being the target of several currently used antibiotics. Cyclothialidine showed poor activity against whole bacterial cells, highlighting scope for improvement regarding cell membrane pemeability in order for the full potential of this new class of antibiotics to be realised, Structurally, cyclothialidine contains a 12-membered lactone ring which is partly integrated into a pentapeptide chain, with a substituted aromatic moiety bordering the lactone, Retrosynthetically it can be traced back to cis-3-hydroxyproline, 3,5-dihydroxy-2,6-dimethylbenzoic acid and four commercially available amino acids; two serine, one cysteine and one alanine. In this work, a model of cyclothialidine was synthesised in order to establish the methodology for more complex compounds. Analogues with hydroxy, dihydroxy and dihydroxymethyl substituted aromatic moieties were then prepared to ensure successful protection methods could be performed and the pharmacophore synthesised. The key aromatic moiety, 2,6-dimethyl-3,5-dihydroxybenzoic acid was produced via two successive Mannich reaction/reduction steps. Acid protection using 4-nitrobenzyl bromide and TBDMS hydroxyl protection followed by bromination of one methyl afforded the desired intermediate. Reaction with a serine/cysteine dipeptide, followed by deprotection and cyclisation under Mitsunobu conditions lead to the 12-membered lactone. An amine substituted aromatic analogue and also replacement of the cysteine sulphur by oxygen were attempted but without success. In an effort to improve cell permeability, a conjugate was synthesised between the pharmacophore and a cholesterol moiety. It was hoped the steroid fragment would serve to increase potency by escorting the molecule through the lipid environment of the cell membrane. The pharmacophore and conjugate were tested against a variety of bacterial strains but the conjugate failed to improve activity.

Long-period fibre grating based biosensor for detection of DNA hybridisation

We implement an optical biosensor using long-period fibre grating immobilised with probe DNA. It has been used to detect hybridisation of target DNA, showing a high sensitivity and reusability function.

Isolation, characterisation and application of novel microbial protein cross-linking enzymes

Microbial transglutaminase is favoured for use in industry over the mammalian isoform, and hence has been utilized, to great effect, as an applied biocatalyst in many industrial areas including the food and textiles industries. There are currently only a limited number of microbial TGase sources known. A number of organisms have been screened for transglutaminase activity using biochemical assays directed towards TGase catalyzed reactions (amine incorporation and peptide cross-linking assay). Of those organisms screened, TGase was identified in a number of isolates including members of the Bacillus and Streptomyces families. In addition, a protein capable of performing a TGase-like reaction was identified in the organism Pseudomonas putida that was deemed immunologically distinct from previously described TGase isoforms, though further work would be required to purify the protein responsible. The genuses Streptoverticillium and Streptomyces are known to be closely related. A number of micro-organisms relating to Streptomyces mobaraensis (formerly Streptoverticillium mobaraensis) have been identified as harboring a TGase enzyme. The exact biological role of Streptomyces TGase is not well understood, though from work undertaken here it would appear to be involved in cell wall growth. Comparison of the purified Streptomyces TGase proteins showed them to exhibit marginally different characteristics in relation to enzymatic activity and pH dependency upon comparison with Streptomyces mobaraensis TGase. In addition, TGase was identified in the organism Saccharomonospora viridis that was found to be genetically identical to that from S. mobaraensis raising questions about the enzymes dissemination in nature. TGase from S. baldaccii was found to be most diverse with respect to enzymatic characteristics whilst still retaining comparable E(y-glutamyl) lysine bond formation to S. mobaraensis TGase. As such S. baldaccii TGase was cloned into an expression vector enabling mass production of the enzyme thereby providing a viable alternative to S. mobaraensis TGase for many industrial processes.

Thiol-containing microspheres as polymeric ligands for the immobilisation of quantum dots

The first demonstration "polymeric ligands" for the immobilisation of quantum dots (QDs) is presented. Specifically, thiol-containing polystyrene microspheres were synthesised and used to incorporate QDs via a swelling/doping strategy. The resultant composite materials were shown to be highly stable against QD leaching in both apolar and polar solvents and retained an identical QD emission profile to non-immobilised QDs. This straightforward approach also allows easy access to controllable and reproducible multiple-QDcontaining microspheres.

Contact lens interactions with the tear film

Biochemical changes brought about by the influence of the contact lens on the tear film are conveniently split into two categories. Firstly, the lens can remove or reduce the levels of specific components in the tear film, and secondly, the lens can augment the tear film, by stimulating the influx of new components or increasing the level of existing components. The most obvious tear film components for study in this context are lipids, proteins, mucins and electrolytes. The interactions are affected by the properties of the lens, the characteristics of the individual wearer and the wear schedule. An additional complicating factor is the fact that the lens is many times thicker than the tear film and any immobilised tear components will be more extensively exposed to oxygen and UV radiation than is the case in the absence of a lens. It is arguably the lipoidal components that are most markedly affected by lens wear, since their immobilisation on the lens surface markedly increases their susceptibility to autoxidative degradation. The limited information that is available highlights the importance of subject specificity and suggests that lipid oxidation phenomena are potentially important in contributing to the 'end of day' discomfort of symptomatic contact lens patients. It is clear that tear lipids, although regarded as relatively inert for many years, are now seen as a reactive and potentially important family of compounds in the search for understanding of contact lens-induced discomfort. The influence of the lens on tear proteins shows the greatest range of complexity. Deposition and denaturation can stimulate immune response, lower molecular weight proteins can be extensively absorbed into the lens matrix and the lens can stimulate cascade or upregulation processes leading either to the generation of additional proteins and peptides or an increase in concentration of existing components. Added to this is the stimulating influence of the lens on vascular leakage leading to the influx of plasma proteins such as albumin. The evidence from studies of mucin expression in tears is not consistent and conclusive. This is in part because sample sources, lens materials and methods of analysis vary considerably, and in some cases the study population numbers are low. Expression levels show mucin and material specificity but clear patterns of behaviour are elusive. The electrolyte composition of tears is significantly different from that of other body fluids. Sodium and potassium dominate but potassium ion concentrations in tears are much higher than in serum levels. Calcium and magnesium concentrations in tears are lower than in serum but closer to interstitial fluids. The contact lens provides the potential for increased osmolarity through enhanced evaporation and differential electrolyte concentrations between the anterior and posterior tear films. Since the changes in ocular biochemistry consequent upon contact lens wear are known to be subject-dependent - as indeed is wearer response to the lens - pre-characterisation of individual participant tear chemistry in clinical studies would enhance understanding of these complex effects. © 2013 Elsevier Ltd.

Cellular uptake of ribonuclease A-functionalised core-shell silica microspheres

Analysis of protein function in a cellular context ideally requires physiologically representative levels of that protein. Thus conventional nucleic acid-based transfection methods are far from ideal owing to the over expression that generally results. Likewise fusions with protein transduction domains can be problematic whilst delivery via liposomes/nanoparticles typically results in endosomal localisation. Recently polymer microspheres have been reported to be highly effective at delivering proteins into cells and thus provide a viable new alternative for protein delivery (protein transduction). Herein we describe the successful delivery of active ribonuclease A into HeLa cells via novel polymer core-silica shell microspheres. Specifically, poly(styrene-co-vinylbenzylisothiouronium chloride) core particles, generated by dispersion polymerisation, were coated with a poly(styrene-co-trimethoxysilylpropyl methacrylate) shell. The resultant core-shell morphology was characterised by transmission electron, scanning electron and fluorescence confocal microscopies, whilst size and surface charge was assessed by dynamic light scattering and zeta-potential measurements, respectively. Subsequently ribonuclease A was coupled to the microspheres using simple carbodiimide chemistry. Gel electrophoresis confirmed and quantified the activity of the immobilised enzyme against purified HeLa RNA. Finally, the polymer-protein particles were evaluated as protein-transduction vectors in vitro to deliver active ribonuclease A to HeLa cells. Cellular uptake of the microspheres was successful and resulted in reduced levels of both intracellular RNA and cell viability.

Function of lipids - their fate in contact lens wear:an interpretive review

Lipids play a vital role in the body at many interfaces. Examples include the lubrication of articulating joints by synovial fluid, the coating of the lung by pulmonary surfactant and the functions of the tear film in the protection of the anterior eye. The role of the lipids is similar at each site - acting as boundary lubricants and reducing surface and interfacial tension. This review focuses on how and why contact lens wear can disrupt the normal function of lipids within the tear film and explains how the otherwise advantageous presence and function of tear lipids can become disadvantageous, causing problems for the wearer. Because the contact lens is some ten times thicker than the tear film, lipids deposited on the anterior surface become immobilised, reducing lipid turnover and thus leading to prolonged exposure to oxygen and light with consequent generation of degradation products. These degraded lipids reduce lens wettability and have additionally been linked to problems of contact lens discomfort and intolerance. Lipid problems are influenced by the thickness of the lens, the material, surface modification, mode of wear and ultimately the subject. The most influential of these variables is frequently the subject. © 2012.

Long-period fibre grating based biosensor for detection of DNA hybridisation

We implement an optical biosensor using long-period fibre grating immobilised with probe DNA. It has been used to detect hybridisation of target DNA, showing a high sensitivity and reusability function.

Extracellular Nm23H1 stimulates neurite outgrowth from dorsal root ganglia neurons in vitro independently of nerve growth factor supplementation or its nucleoside diphosphate kinase activity

The nucleoside diphosphate (NDP) kinase, Nm23H1, is a highly expressed during neuronal development, whilst induced over-expression in neuronal cells results in increased neurite outgrowth. Extracellular Nm23H1 affects the survival, proliferation and differentiation of non-neuronal cells. Therefore, this study has examined whether extracellular Nm23H1 regulates nerve growth. We have immobilised recombinant Nm23H1 proteins to defined locations of culture plates, which were then seeded with explants of embryonic chick dorsal root ganglia (DRG) or dissociated adult rat DRG neurons. The substratum-bound extracellular Nm23H1 was stimulatory for neurite outgrowth from chick DRG explants in a concentration-dependent manner. On high concentrations of Nm23H1, chick DRG neurite outgrowth was extensive and effectively limited to the location of the Nm23H1, i.e. neuronal growth cones turned away from adjacent collagen-coated substrata. Nm23H1-coated substrata also significantly enhanced rat DRG neuronal cell adhesion and neurite outgrowth in comparison to collagen-coated substrata. These effects were independent of NGF supplementation. Recombinant Nm23H1 (H118F), which does not possess NDP kinase activity, exhibited the same activity as the wild-type protein. Hence, a novel neuro-stimulatory activity for extracellular Nm23H1 has been identified in vitro, which may function in developing neuronal systems. © 2010 Elsevier Inc.

Delivering enhanced efficiency in the synthesis of α-diazosulfoxides by exploiting the process control enabled in flow

Continuous-flow generation of α-diazosulfoxides results in a two- to three-fold increase in yields and decreased reaction times compared to standard batch synthesis methods. These high yielding reactions are enabled by flowing through a bed of polystyrene-supported base (PS-DBU or PS-NMe2) with highly controlled residence times. This engineered solution allows the α-diazosulfoxides to be rapidly synthesized while limiting exposure of the products to basic reaction conditions, which have been found to cause rapid decomposition. In addition to improved yields, this work has the added advantage of ease of processing, increased safety profile, and scale-up potential.

Embedding colloidal nanoparticles inside mesoporous silica using gas expanded liquids for high loading recyclable catalysts

The ability to tune the structural and chemical properties of colloidal nanoparticles (NPs), make them highly advantageous for studying activity and selectivity dependent catalytic behaviour. Incorporating pre-synthesized colloidal NPs into porous supports materials remains a challenge due to poor wetting and pore permeability. In this report monodisperse, composition controlled AgPd alloy NPs were synthesised and embedded into SBA-15 using supercritical carbon dioxide and hexane. Supercritical fluid impregnation resulted in high metal loading without the requirement for surface pre-treatments. The catalytic activity, reaction profiles and recyclability of the alloy NPs embedded in SBA-15 and immobilised on non-porous SiO2 are evaluated. The NPs incorporated within the SBA-15 porous network showed significantly greater recyclability performance compared to non-porous SiO2.

Synthèse des fragments de l'ionomycine

L’ionomycine est un ionophore produit par la bactérie gram-positive streptomyces conglobatus. Sa synthèse représente un défi, car il possède plusieurs centres chiraux dans un motif polypropylène. De plus, la grande densité d’oxygène sur celui-ci oblige l’utilisation de plusieurs protections orthogonales. Notre stratégie divise l’ionomycine en quatre fragments, trois possédant le motif polypropylène, ainsi qu’un quatrième, bis-tétrahydrofuranne. Les trois premiers sont synthétisés en utilisant une méthodologie puissante développée dans le laboratoire du Pr Spino, qui utilise l’addition d’alkylcyanocuprates sur les carbonates allyliques dérivés de la menthone. Celle-ci permet l’introduction d’une unité propylène, avec un excellent contrôle du centre chiral introduit. Cette méthode est utilisée de manière itérative, afin d’introduire plusieurs unités propylènes. De plus, notre stratégie est hautement convergente, puisque des intermédiaires des fragments plus courts servent de produit de départ pour la synthèse des fragments plus longs. Le dernier fragment, bis-tétrahydrofuranne, a été fabriqué à partir de l’acétate de géranyle, par une polycyclisation d’un diépoxyde chiral, les époxydes ayant été introduits par une époxydation de Shi. Cette synthèse, si complétée, serait la plus courte publiée, avec 24 étapes pour la séquence linéaire la plus longue (51 au total).

Development of a whole cell biochip for toxicant detection.

In the development of biosensors for ecotoxicity testing it is desirable to produce a small, portable system that can be used in the field. Toxicity testing using bioluminescence is widely used in the laboratory utilising natural and genetically modified (lux/ luc-marked) bacteria and other microorganisms. It is currently not possible to use genetically manipulated microorganisms in field testing and a biosensor, therefore, that incorporates naturally luminescent organisms may be preferred. In the development of a biosensor it is aimed to use the naturally luminescent bacterium Vibrio fischeri as a toxicity detection system on a chip. The bacterium will be immobilised in a polymeric matrix. Current work deals with the optimisation of light output and light preservation within the bacterium prior to immobilisation in polyvinyl alcohol. An examination of a range of physicochemical conditions within the polymer will be made, including cell density, thickness of polymer film, growth and light induction environment, and, preservation conditions, in order to develop a testing system giving consistent results over the lifetime of the biosensor. Data will be presented on light production using different culture media for the growth of V. fischeri and retention of light under immobilised conditions. .

Glycosylation and Glycodiversification in Polyketide Antibiotics: Unraveling Biosynthetic Steps in Nogalamycin Formation

Soil-dwelling Streptomyces bacteria are known for their ability to produce biologically active compounds such as antimicrobial, immunosuppressant, antifungal and anticancer drugs. S. nogalater is the producer of nogalamycin, a potential anticancer drug exhibiting high cytotoxicity and activity against human topoisomerases I and II. Nogalamycin is an anthracycline polyketide comprising a four-ring aromatic backbone,a neutral deoxy sugar at C7, and an amino sugar attached via an O–C bond at C1 and a C–C bond between C2 and C5´´. This kind of attachment of the amino sugar is unusual thus making the structure of the compound highly interesting. The sugar is also associated with the biological activity of nogalamycin, as it facilitates binding to DNA. Furthermore, the sugar moieties of anthracyclines are often crucial for their biological activity. Together the interesting attachment of the amino sugar and the general reliance of polyketides on the sugar moieties for bioactivity have made the study of the biosynthesis of nogalamycin attractive. The sugar moieties are typically attached by glycosyltransferases, which use two substrates: the donor and the acceptor. The literature review of the thesis is focused on the glycosylation of polyketides and the possibilities to alter their glycosylation patterns. My own thesis work revolves around the biosynthesis of nogalamycin. We have elucidated the individual steps that lead to its rather unique structure. We reconstructed the whole biosynthetic pathway in the heterologous host S. albus using a cosmid and a plasmid. In the process, we were able to isolate new compounds when the cosmid, which contains the majority of the nogalamycin gene cluster, was expressed alone in the heterologous host. The new compounds included true intermediates of the pathway as well as metabolites, which were most likely altered by the endogenous enzymes of the host. The biological activity of the most interesting new products was tested against human topoisomerases I and II, and they were found to exhibit such activities. The heterologous expression system facilitated the generation of mutants with inactivated biosynthetic genes. In that process, we were able to identify the functions of the glycosyltransferases SnogE and SnogD, solve the structure of SnogD, discover a novel C1-hydroxylase system comprising SnoaW and SnoaL2, and establish that the two homologous non-heme α-ketoglutarate and Fe2+ dependent enzymes SnoK and SnoN catalyze atypical reactions on the pathway. We demonstrated that SnoK was responsible for the formation of the additional C–C bond, whereas SnoN is an epimerase. A combination of in vivo and in vitro techniques was utilized to unravel the details of these enzymes. Protein crystallography gave us an important means to understand the mechanisms. Furthermore, the solved structures serve as platforms for future rational design of the enzymes.

Nouvelle souche donneuse pour la conjugaison intergénérique avec les actinobactéries

Les actinomycètes filamenteux du sol appartenant au genre Frankia peuvent vivre librement en tant que saprophytes, ou encore s'associer aux racines de plantes pour former une symbiose. Malgré leur importance écologique et l'intérêt biologique qu'ils suscitent, plusieurs aspects de la biologie des Frankiaceae demeurent mal compris. Ceci est dû, entre autres, à leur faible taux de génération et à la difficulté de maintenir des cultures en croissance active, mais surtout, à l’absence d’outils génétiques fonctionnels et efficaces pour les étudier. En raison de l’importance environnementale de Frankia, la mise au point d’un système de modification génétique chez cette actinobactérie est devenue essentielle pour procéder à l’analyse fonctionnelle des gènes d’intérêt et étudier plus efficacement la physiologie et les interactions de ce symbiote actinorhizien avec ses plantes hôtes. Parmi les différentes méthodes de modification génétique, la conjugaison bactérienne semble un moyen efficace pour permettre l’échange de matériel génétique chez plusieurs actinomycètes. Ainsi, la souche Escherichia coli ET12567, fréquemment utilisée lors des conjugaisons intergénériques avec diverses actinobactéries, dont Streptomyces, Amycolatopsis, Kitasatospora et Micromonospora, semble une bonne candidate pour servir de bactérie donneuse lors des conjugaisons intergénériques. Comme l'utilisation d'une souche donneuse auxotrophe permet de faciliter l'étape de contre-sélection, la mutation dapA, codant pour la synthèse de l'acide diaminopimélique (DAP), sera introduite chez E. coli ET12567/pUZ8002. Étant donné que le DAP est un constituant essentiel de la paroi de peptidoglycane et un précurseur de la lysine, cette souche sera totalement dépendante de l'ajout de DAP exogène dans le milieu de culture. Ainsi, la contre-sélection se fera simplement en cessant l'ajout de DAP, rendant cette étape non seulement plus facile et efficace, mais aussi permettant d'éviter l'utilisation d'antibiotique. La croissance des exconjugants peut ainsi se faire dans des conditions optimales, ce qui est particulièrement intéressant pour les actinomycètes présentant une croissance lente comme c'est le cas pour Frankia. Les résultats obtenus montrent que l'utilisation de l'acide nalidixique est moins efficace que la déplétion en DAP pour contre-sélectionner la souche donneuse après conjugaison. L'utilisation d'un mutant ΔdapA comme alternative à l'utilisation d'antibiotique rend la conjugaison bactérienne accessible à un plus large spectre de microorganismes potentiellement sensibles à l'acide nalidixique. Il est clair que les stratégies de clonage qui seront développées auront un impact significatif sur la recherche fondamentale et appliquée chez les actinomycètes, permettant des analyses fonctionnelles des gènes d’intérêts, que ce soit par interruption ou remplacement de gènes ou encore par complémentation génique.