A calcineurin homologous protein inhibits GTPase-stimulated Na-H exchange.

Activation of the ubiquitously expressed Na-H exchanger, NHE1, results in an increased efflux of intracellular H+. The increase in intracellular pH associated with this H+ efflux may contribute to regulating cell proliferation, differentiation, and neoplastic transformation. Although NHE1 activity is stimulated by growth factors and hormones acting through multiple GTPase-mediated pathways, little is known about how the exchanger is directly regulated. Using expression library screening, we identified a novel protein that specifically binds to NHE1 at a site that is critical for growth factor stimulation of exchange activity. This protein is homologous to calcineurin B and calmodulin and is designated CHP for calcineurin B homologous protein. Like NHE1, CHP is widely expressed in human tissues. Transient overexpression of CHP inhibits serum- and GTP-ase-stimulated NHE1 activity. CHP is a phosphoprotein and expression of constitutively activated GTPases decreases CHP phosphorylation. The phosphorylation state of CHP may therefore be an important signal controlling mitogenic regulation of NHE1.

Efficient generation of recombinant adenoviruses using adenovirus DNA-terminal protein complex and a cosmid bearing the full-length virus genome.

An efficient method of constructing recombinant adenoviruses (Ads) has been established. The expression unit to be introduced into recombinant Ad was first inserted into the unique Swa I site of the full-length Ad genome cloned in a cassette cosmid. The cassette bearing the expression unit was then cotransfected into human embryonic kidney 293 cells together with the Ad DNA-terminal protein complex digested at several sites with Eco T22I or Ase I/EcoRI. The use of the parent Ad DNA-terminal protein complex instead of the deproteinized Ad genome DNA allowed very efficient recovery of the desired recombinant Ad, and the above restriction digestion drastically reduced regeneration of the parent virus. Several hundred virus clones were readily obtained in each experiment, and about 70% of the clones were the desired recombinant viruses. Furthermore, because the cassette contained the full-length Ad genome, any position of the genome could be easily modified to develop a new vector design. We established construction systems for two types of Ad vectors, the E1-substitution type and the E4-insertion type. This method may greatly facilitate the application of recombinant Ads and should be useful for further improvement of Ad vectors.

Metodologia para execução de aplicações paralelas baseadas no modelo BSP com tarefas heterogêneas.

A computação paralela permite uma série de vantagens para a execução de aplicações de grande porte, sendo que o uso efetivo dos recursos computacionais paralelos é um aspecto relevante da computação de alto desempenho. Este trabalho apresenta uma metodologia que provê a execução, de forma automatizada, de aplicações paralelas baseadas no modelo BSP com tarefas heterogêneas. É considerado no modelo adotado, que o tempo de computação de cada tarefa secundária não possui uma alta variância entre uma iteração e outra. A metodologia é denominada de ASE e é composta por três etapas: Aquisição (Acquisition), Escalonamento (Scheduling) e Execução (Execution). Na etapa de Aquisição, os tempos de processamento das tarefas são obtidos; na etapa de Escalonamento a metodologia busca encontrar a distribuição de tarefas que maximize a velocidade de execução da aplicação paralela, mas minimizando o uso de recursos, por meio de um algoritmo desenvolvido neste trabalho; e por fim a etapa de Execução executa a aplicação paralela com a distribuição definida na etapa anterior. Ferramentas que são aplicadas na metodologia foram implementadas. Um conjunto de testes aplicando a metodologia foi realizado e os resultados apresentados mostram que os objetivos da proposta foram alcançados.

Composición escolar y expectativas del alumnado por origen y etnia: una aproximación a la segregación escolar extraoficial

El incremento de la desigualdad social en España durante los últimos años, ha sido acompañado por un aumento en los niveles de segregación escolar en las zonas urbanas vulnerables. La presente investigación se desarrolla en los institutos de educación secundaria de la Zona Norte de la ciudad de Alicante; zona de alta concentración de población inmigrada y gitana. Su objetivo es revelar la composición escolar por origen y etnia del alumnado de estos centros frente a las carencias de los datos oficiales, analizando, a la vez, algunas de sus expectativas de futuro. Los hallazgos del trabajo de campo demuestran que las estadísticas oficiales están lejos de reflejar la realidad segregada de algunos centros educativos, situación que genera un efecto negativo sobre las expectativas del alumnado en cuestión además de impedir diseñar e implementar políticas sociales y educativas que aminoren tal segregación y por tanto, la desigualdad de oportunidades.

Ethnogenesis and Craniofacial Change in Japan from the Perspective of Nonmetric Traits

To examine population affinities in light of the ‘dual structure model’, frequencies of 21 nonmetric cranial traits were analyzed in 17 prehistoric to recent samples from Japan and five from continental northeast Asia. Eight bivariate plots, each representing a different bone or region of the skull, as well as cluster analysis of 21-trait mean measures of divergence using multidimensional scaling and additive tree techniques, revealed good discrimination between the Jomon-Ainu indigenous lineage and that of the immigrants who arrived from continental Asia after 300 BC. In Hokkaido, in agreement with historical records, Ainu villages of Hidaka province were least, and those close to the Japan Sea coast were most, hybridized with Wajin. In the central islands, clines were identified among Wajin skeletal samples whereby those from Kyushu most resembled continental northeast Asians, while those from the northernmost prefectures of Tohoku apparently retained the strongest indigenous heritage. In the more southerly prefectures of Tohoku, stronger traces of Jomon ancestry prevailed in the cohort born during the latest Edo period than in the one born after 1870. Thus, it seems that increased inter-regional mobility and gene flow following the Meiji Restoration initiated the most recent episode in the long process of demic diffusion that has helped to shape craniofacial change in Japan.

Sedimentological and geophysical investigation of sediment cores from the Amundsen Sea

Ice loss from the marine-based, potentially unstable West Antarctic Ice Sheet (WAIS) contributes to current sea-level rise and may raise sea level by up to 3.3 to 5 meters in the future. Over the past few decades, glaciers draining the WAIS into the Amundsen Sea Embayment (ASE) have shown accelerated ice flow, rapid thinning and grounding-line retreat. However, the long-term context of this ice-sheet retreat is poorly constrained, limiting our ability to accurately predict future WAIS behaviour. Here we present a new chronology for WAIS retreat from the inner continental shelf of the eastern ASE based on radiocarbon dates from three marine sediment cores. The ages document a retreat of the grounding line to within ~93 km of its modern position before 11.7±0.7 kyr BP (thousand years before present). This early deglaciation is consistent with ages for grounding-line retreat from the western ASE. Our new data demonstrate that, other than in the Ross Sea, WAIS retreat in the ASE has not continued progressively since the Last Glacial Maximum. Furthermore, our results suggest that the grounding-line position in the ASE was predominantly stable throughout the Holocene, and that any episodes of fast retreat similar to that observed today must have been short-lived. Alternatively, today's rapid retreat was unprecedented during the Holocene. Therefore, the current ice loss must originate in recent changes in regional climate, ocean circulation or ice-sheet dynamics. Incorporation of these results into models is essential to produce robust predictions of future ice-sheet change and its contribution to sea-level rise.

Preparation and characterization of analytical reference minerals /

Mode of access: Internet.

Contributions to Physics-Based Aeroservoelastic Uncertainty Analysis

Thesis (Ph.D.)--University of Washington, 2016-06

Improved photobiological H-2 production in engineered green algal cells

Oxygenic photosynthetic organisms use solar energy to split water (H2O) into protons (H+), electrons (e(-)), and oxygen. A select group of photosynthetic microorganisms, including the green alga Chlamydomonas reinhardtii, has evolved the additional ability to redirect the derived H+ and e(-) to drive hydrogen (H-2) production via the chloroplast hydrogenases HydA1 and A2 (H(2)ase). This process occurs under anaerobic conditions and provides a biological basis for solar-driven H-2 production. However, its relatively poor yield is a major limitation for the economic viability of this process. To improve H-2 production in Chlamydomonas, we have developed a new approach to increase H+ and e(-) supply to the hydrogenases. In a first step, mutants blocked in the state 1 transition were selected. These mutants are inhibited in cyclic e(-) transfer around photosystem I, eliminating possible competition for e(-) with H(2)ase. Selected strains were further screened for increased H-2 production rates, leading to the isolation of Stm6. This strain has a modified respiratory metabolism, providing it with two additional important properties as follows: large starch reserves ( i.e. enhanced substrate availability), and a low dissolved O-2 concentration (40% of the wild type (WT)), resulting in reduced inhibition of H2ase activation. The H-2 production rates of Stm6 were 5 - 13 times that of the control WT strain over a range of conditions ( light intensity, culture time, +/- uncoupler). Typically, similar to 540 ml of H-2 liter(-1) culture ( up to 98% pure) were produced over a 10-14-day period at a maximal rate of 4 ml h(-1) ( efficiency = similar to 5 times the WT). Stm6 therefore represents an important step toward the development of future solar-powered H-2 production systems.

Low jitter, long distance pulse transmission near net fibre dispersion zero wavelength

The authors study experimentally ~10 ps return-to-zero pulse propagation near the net dispersion zero of an optical fibre transmission line. Stable near-jitter-free propagation was observed over 70 Mm. Pulse stabilisation and ASE suppression were achieved through the saturable aborber mechanism of nonlinear polarisation rotation.

Gamma-shaped long-cavity normal-dispersion mode-locked Er-fiber laser for sub-nanosecond high-energy pulsed generation

We propose the design of a novel ?-shaped fiber laser resonator and apply it to build a long-cavity normaldispersion mode-locked Er-fiber laser which features enhanced functionalities for management and optimization of pulsed lasing regimes. We report the generation of sub-nanosecond pulses with the energy of ~0.5 µJ at a kilohertz-scale repetition rate in an all-fiber system based on the new laser design. A combination of special design solutions in the laser, such as polarization instability compensation in the ultra-long arm of the resonator, intra-cavity spectral selection of radiation with a broadband fiber Bragg grating, and polarization selection by means of a tilted refractive index grating, ensures low amplified spontaneous emission (ASE) noise and high stability of the laser system output parameters.

Stabilization of self-coherent OFDM with injection locked laser

With the rebirth of coherent detection, various algorithms have come forth to alleviate phase noise, one of the main impairments for coherent receivers. These algorithms provide stable compensation, however they limit the DSP. With this key issue in mind, Fabry Perot filter based self coherent optical OFDM was analyzed which does not require phase noise compensation reducing the complexity in DSP at low OSNR. However, the performance of such a receiver is limited due to ASE noise at the carrier wavelength, especially since an optical amplifier is typically employed with the filter to ensure sufficient carrier power. Subsequently, the use of an injection-locked laser (ILL) to retrieve the frequency and phase information from the extracted carrier without the use of an amplifier was recently proposed. In ILL based system, an optical carrier is sent along with the OFDM signal in the transmitter. At the receiver, the carrier is extracted from the OFDM signal using a Fabry-Perot tunable filter and an ILL is used to significantly amplify the carrier and reduce intensity and phase noise. In contrast to CO-OFDM, such a system supports low-cost broad linewidth lasers and benefits with lower complexity in the DSP as no carrier frequency estimation and correction along with phase noise compensation is required.

Towards requirements aware systems:run-time resolution of design-time assumptions

In earlier work we proposed the idea of requirements-aware systems that could introspect about the extent to which their goals were being satisfied at runtime. When combined with requirements monitoring and self adaptive capabilities, requirements awareness should help optimize goal satisfaction even in the presence of changing run-time context. In this paper we describe initial progress towards the realization of requirements-aware systems with REAssuRE. REAssuRE focuses on explicit representation of assumptions made at design time. When such assumptions are shown not to hold, REAssuRE can trigger system adaptations to alternative goal realization strategies.

Ultra-long mode-locked Er-droped fibre lasers

The development of ultra-long (UL) cavity (hundreds of meters to several kilometres) mode-locked fibre lasers for the generation of high-energy light pulses with relatively low (sub-megahertz) repetition rates has emerged as a new rapidly advancing area of laser physics. The first demonstration of high pulse energy laser of this type was followed by a number of publications from many research groups on long-cavity Ytterbium and Erbium lasers featuring a variety of configurations with rather different mode-locked operations. The substantial interest to this new approach is stimulated both by non-trivial underlying physics and by the potential of high pulse energy laser sources with unique parameters for a range of applications in industry, bio-medicine, metrology and telecommunications. It is well known, that pulse generation regimes in mode-locked fibre lasers are determined by the intra-cavity balance between the effects of dispersion and non-linearity, and the processes of energy attenuation and amplification. The highest per-pulse energy has been achieved in normal-dispersion UL fibre lasers mode-locked through nonlinear polarization evolution (NPE) for self-modelocking operation. In such lasers are generated the so-called dissipative optical solitons. The uncompensated net normal dispersion in long-cavity resonatorsusually leads to very high chirp and, consequently, to a relatively long duration of generated pulses. This thesis presents the results of research Er-doped ultra-long (more than 1 km cavity length) fibre lasers mode-locked based on NPE. The self-mode-locked erbium-based 3.5-km-long all-fiber laser with the 1.7 µJ pulse energy at a wavelength of 1.55 µm was developed as a part of this research. It has resulted in direct generation of short laser pulses with an ultralow repetition rate of 35.1 kHz. The laser cavity has net normal-dispersion and has been fabricated from commercially-available telecom fibers and optical-fiber elements. Its unconventional linear-ring design with compensation for polarization instability ensures high reliability of the self-mode-locking operation, despite the use of a non polarization-maintaining fibers. The single pulse generation regime in all-fibre erbium mode-locking laser based on NPE with a record cavity length of 25 km was demonstrated. Modelocked lasers with such a long cavity have never been studied before. Our result shows a feasibility of stable mode-locked operation even for an ultra-long cavity length. A new design of fibre laser cavity – “y-configuration”, that offers a range of new functionalities for optimization and stabilization of mode-locked lasing regimes was proposed. This novel cavity configuration has been successfully implemented into a long-cavity normal-dispersion self-mode-locked Er-fibre laser. In particular, it features compensation for polarization instability, suppression of ASE, reduction of pulse duration, prevention of in-cavity wave breaking, and stabilization of the lasing wavelength. This laser along with a specially designed double-pass EDFA have allowed us to demonstrate anenvironmentally stable all-fibre laser system able to deliver sub-nanosecond high-energy pulses with low level of ASE noise.