A circadian clock regulates rod and cone input to fish retinal cone horizontal cells.

In the vertebrate retina, the light responses of post-receptor neurons depend on the ambient or background illumination. Using intracellular recording, we have found that a circadian clock regulates the light responses of dark-adapted fish cone horizontal cells. Goldfish were maintained on a 12-hr light/12-hr dark cycle. At different times of the day or night, retinas were superfused in darkness for 90 min ("prolonged darkness"), following which horizontal cells were impaled without the aid of any light flashes. In some of the experiments, fish were kept in constant darkness for 3-48 hr prior to surgery. After prolonged darkness during the night, but not during the day, the light responses of L-type cone horizontal cells resembled those of rod horizontal cells with respect to threshold, waveform, intensity-response functions, and spectral sensitivity. Following light sensitization during the night and day, the light responses of rod and cone horizontal cells were clearly different with respect to threshold, waveform, intensity-response functions, and spectral sensitivity. Under conditions of constant darkness for two full light/dark cycles, average responses of cone horizontal cells to a bright light stimulus during the subjective day were greater than during the subjective night. Prior reversal of the light/dark cycle reversed the 24-hr rhythm of cone horizontal cell responses to bright lights. In addition, following one full cycle of constant darkness, average cone horizontal cell spectral sensitivity during the subjective night closely matched that of rod horizontal cells, whereas average cone horizontal cell spectral sensitivity during the subjective day was similar to that of red (625 nm) cones. These results indicate that the effects of dark adaptation depend on the time of day and are regulated by a circadian clock so that cone input to cone horizontal cells predominates in the day and rod input predominates in the night.

VAR models and methods for monetary and health economics

Negli ultimi anni i modelli VAR sono diventati il principale strumento econometrico per verificare se può esistere una relazione tra le variabili e per valutare gli effetti delle politiche economiche. Questa tesi studia tre diversi approcci di identificazione a partire dai modelli VAR in forma ridotta (tra cui periodo di campionamento, set di variabili endogene, termini deterministici). Usiamo nel caso di modelli VAR il test di Causalità di Granger per verificare la capacità di una variabile di prevedere un altra, nel caso di cointegrazione usiamo modelli VECM per stimare congiuntamente i coefficienti di lungo periodo ed i coefficienti di breve periodo e nel caso di piccoli set di dati e problemi di overfitting usiamo modelli VAR bayesiani con funzioni di risposta di impulso e decomposizione della varianza, per analizzare l'effetto degli shock sulle variabili macroeconomiche. A tale scopo, gli studi empirici sono effettuati utilizzando serie storiche di dati specifici e formulando diverse ipotesi. Sono stati utilizzati tre modelli VAR: in primis per studiare le decisioni di politica monetaria e discriminare tra le varie teorie post-keynesiane sulla politica monetaria ed in particolare sulla cosiddetta "regola di solvibilità" (Brancaccio e Fontana 2013, 2015) e regola del GDP nominale in Area Euro (paper 1); secondo per estendere l'evidenza dell'ipotesi di endogeneità della moneta valutando gli effetti della cartolarizzazione delle banche sul meccanismo di trasmissione della politica monetaria negli Stati Uniti (paper 2); terzo per valutare gli effetti dell'invecchiamento sulla spesa sanitaria in Italia in termini di implicazioni di politiche economiche (paper 3). La tesi è introdotta dal capitolo 1 in cui si delinea il contesto, la motivazione e lo scopo di questa ricerca, mentre la struttura e la sintesi, così come i principali risultati, sono descritti nei rimanenti capitoli. Nel capitolo 2 sono esaminati, utilizzando un modello VAR in differenze prime con dati trimestrali della zona Euro, se le decisioni in materia di politica monetaria possono essere interpretate in termini di una "regola di politica monetaria", con specifico riferimento alla cosiddetta "nominal GDP targeting rule" (McCallum 1988 Hall e Mankiw 1994; Woodford 2012). I risultati evidenziano una relazione causale che va dallo scostamento tra i tassi di crescita del PIL nominale e PIL obiettivo alle variazioni dei tassi di interesse di mercato a tre mesi. La stessa analisi non sembra confermare l'esistenza di una relazione causale significativa inversa dalla variazione del tasso di interesse di mercato allo scostamento tra i tassi di crescita del PIL nominale e PIL obiettivo. Risultati simili sono stati ottenuti sostituendo il tasso di interesse di mercato con il tasso di interesse di rifinanziamento della BCE. Questa conferma di una sola delle due direzioni di causalità non supporta un'interpretazione della politica monetaria basata sulla nominal GDP targeting rule e dà adito a dubbi in termini più generali per l'applicabilità della regola di Taylor e tutte le regole convenzionali della politica monetaria per il caso in questione. I risultati appaiono invece essere più in linea con altri approcci possibili, come quelli basati su alcune analisi post-keynesiane e marxiste della teoria monetaria e più in particolare la cosiddetta "regola di solvibilità" (Brancaccio e Fontana 2013, 2015). Queste linee di ricerca contestano la tesi semplicistica che l'ambito della politica monetaria consiste nella stabilizzazione dell'inflazione, del PIL reale o del reddito nominale intorno ad un livello "naturale equilibrio". Piuttosto, essi suggeriscono che le banche centrali in realtà seguono uno scopo più complesso, che è il regolamento del sistema finanziario, con particolare riferimento ai rapporti tra creditori e debitori e la relativa solvibilità delle unità economiche. Il capitolo 3 analizza l’offerta di prestiti considerando l’endogeneità della moneta derivante dall'attività di cartolarizzazione delle banche nel corso del periodo 1999-2012. Anche se gran parte della letteratura indaga sulla endogenità dell'offerta di moneta, questo approccio è stato adottato raramente per indagare la endogeneità della moneta nel breve e lungo termine con uno studio degli Stati Uniti durante le due crisi principali: scoppio della bolla dot-com (1998-1999) e la crisi dei mutui sub-prime (2008-2009). In particolare, si considerano gli effetti dell'innovazione finanziaria sul canale dei prestiti utilizzando la serie dei prestiti aggiustata per la cartolarizzazione al fine di verificare se il sistema bancario americano è stimolato a ricercare fonti più economiche di finanziamento come la cartolarizzazione, in caso di politica monetaria restrittiva (Altunbas et al., 2009). L'analisi si basa sull'aggregato monetario M1 ed M2. Utilizzando modelli VECM, esaminiamo una relazione di lungo periodo tra le variabili in livello e valutiamo gli effetti dell’offerta di moneta analizzando quanto la politica monetaria influisce sulle deviazioni di breve periodo dalla relazione di lungo periodo. I risultati mostrano che la cartolarizzazione influenza l'impatto dei prestiti su M1 ed M2. Ciò implica che l'offerta di moneta è endogena confermando l'approccio strutturalista ed evidenziando che gli agenti economici sono motivati ad aumentare la cartolarizzazione per una preventiva copertura contro shock di politica monetaria. Il capitolo 4 indaga il rapporto tra spesa pro capite sanitaria, PIL pro capite, indice di vecchiaia ed aspettativa di vita in Italia nel periodo 1990-2013, utilizzando i modelli VAR bayesiani e dati annuali estratti dalla banca dati OCSE ed Eurostat. Le funzioni di risposta d'impulso e la scomposizione della varianza evidenziano una relazione positiva: dal PIL pro capite alla spesa pro capite sanitaria, dalla speranza di vita alla spesa sanitaria, e dall'indice di invecchiamento alla spesa pro capite sanitaria. L'impatto dell'invecchiamento sulla spesa sanitaria è più significativo rispetto alle altre variabili. Nel complesso, i nostri risultati suggeriscono che le disabilità strettamente connesse all'invecchiamento possono essere il driver principale della spesa sanitaria nel breve-medio periodo. Una buona gestione della sanità contribuisce a migliorare il benessere del paziente, senza aumentare la spesa sanitaria totale. Tuttavia, le politiche che migliorano lo stato di salute delle persone anziane potrebbe essere necessarie per una più bassa domanda pro capite dei servizi sanitari e sociali.

Controle cooperativo aplicado a sistemas de posicionamento dinâmico.

Hoje em dia com o crescente aumento da exploração de petróleo e gás em águas profundas, há um aumento na demanda por operações offshore envolvendo a cooperação entre unidades flutuantes. Tais operações requerem um alto nível de planejamento e coordenação, o que na maioria dos casos é feito com a troca de informação no nível de operação, com cada unidade flutuante comandada independentemente. Exemplos de operações deste tipo vão desde operações de alívio passando por operações de instalação de equipamento submarino, até operações de pesquisa envolvendo múltiplas unidades flutuantes dotadas de sistema de posicionamento dinâmico (DP). As vantagens do controle cooperativo surgem com a redução do erro da distância relativa durante a manutenção do posicionamento ou durante a execução de manobras de posicionamento conjuntas. No presente trabalho, os conceitos de controle de consenso são aplicados de forma combinada com o sistema DP de cada navio. A influência dos ganhos do controlador cooperativo no sistema como um todo será discutida, utilizando-se técnicas de análise da resposta em frequência. Simulações completas no domínio do tempo e experimentos usando modelos em escala serão utilizados para se demonstrar o funcionamento do controle cooperativo. Todas as simulações serão conduzidas no simulador Dynasim e os ensaios experimentais no tanque de provas da Engenharia Naval da Escola Politécnica da Universidade de São Paulo. Além disso, serão feitas comparações entre os experimentos em tanque de provas e simulações numéricas equivalentes, demonstrando-se a validade dos ensaios numéricos. Será também demonstrado que os requisitos de projetos adotados são atendidos pelos ensaios em tanque de provas. .

Fermi-edge singularities in linear and nonlinear ultrafast spectroscopy

We discuss Fermi-edge singularity effects on the linear and nonlinear transient response of an electron gas in a doped semiconductor. We use a bosonization scheme to describe the low-energy excitations, which allows us to compute the time and temperature dependence of the response functions. Coherent control of the energy absorption at resonance is analyzed in the linear regime. It is shown that a phase shift appears in the coherent control oscillations, which is not present in the excitonic case. The nonlinear response is calculated analytically and used to predict that four wave-mixing experiments would present a Fermi-edge singularity when the exciting energy is varied. A new dephasing mechanism is predicted in doped samples that depends linearly on temperature and is produced by the low-energy bosonic excitations in the conduction band.

The functional roles of passive electroreception in non-electric fishes

Passive electroreception is a complex and specialised sense found in a large range of aquatic vertebrates primarily designed for the detection of weak bioelectric fields. Particular attention has traditionally focused on cartilaginous fishes, but a range of teleost and non-teleost fishes from a diversity of habitats have also been examined. As more species are investigated, it has become apparent that the role of electroreception in fishes is not restricted to locating prey, but is utilised in other complex behaviours. This paper presents the various functional roles of passive electroreception in non-electric fishes, by reviewing much of the recent research on the detection of prey in the context of differences in species' habitat (shallow water, deep-sea, freshwater and saltwater). A special case study on the distribution and neural groupings of ampullary organs in the omnihaline bull shark, Carcharhinus leucas, is also presented and reveals that prey-capture, rather than navigation, may be an important determinant of pore distribution. The discrimination between potential predators and conspecifics and the role of bioelectric stimuli in social behaviour is discussed, as is the ability to migrate over short or long distances in order to locate environmentally favourable conditions. The various theories proposed regarding the importance and mediation of geomagnetic orientation by either an electroreceptive and/or a magnetite-based sensory system receives particular attention. The importance of electroreception to many species is emphasised by highlighting what still remains to be investigated, especially with respect to the physical, biochemical and neural properties of the ampullary organs and the signals that give rise to the large range of observed behaviours.

Reply to comment by A. G. J. Hilberts and P. A. Troch on "Influence of capillarity on a simple harmonic oscillating water table: Sand column experiments and modeling"

We thank Hilberts and Troch [2006] for their comment on our paper [Cartwright et al, 2005]. Before proceeding with our specific replies to the comments we would first like to clarify the definitions and meanings of equations (1)-(3) as presented by Hilberts and Troch [2006]. First, equation (1) is the fundamental definition of the (complex) effective porosity as derived by Nielsen and Perrochet [2000]. Equations (2) and (3), however, represent the linear frequency response function of the water table in the sand column responding to simple harmonic forcing. This function, which was validated by Nielsen and Perrochet [2000], provides an alternative method for estimating the complex effective porosity from the experimental sand column data in the absence of direct measurements of h_(tot) (which are required if equation (1) is to be used).

Independent neuronal oscillators of the rat globus pallidus

In vivo, neurons of the globus pallidus (GP) and subthalamic nucleus (STN) resonate independently around 70 Hz. However, on the loss of dopamine as in Parkinson's disease, there is a switch to a lower frequency of firing with increased bursting and synchronization of activity. In vitro, type A neurons of the GP, identified by the presence of Ih and rebound depolarizations, fire at frequencies (≤80 Hz) in response to glutamate pressure ejection, designed to mimic STN input. The profile of this frequency response was unaltered by bath application of the GABAA antagonist bicuculline (10 μM), indicating the lack of involvement of a local GABA neuronal network, while cross-correlations of neuronal pairs revealed uncorrelated activity or phase-locked activity with a variable phase delay, consistent with each GP neuron acting as an independent oscillator. This autonomy of firing appears to arise due to the presence of intrinsic voltage- and sodium-dependent subthreshold membrane oscillations. GABAA inhibitory postsynaptic potentials are able to disrupt this tonic activity while promoting a rebound depolarization and action potential firing. This rebound is able to reset the phase of the intrinsic oscillation and provides a mechanism for promoting coherent firing activity in ensembles of GP neurons that may ultimately lead to abnormal and pathological disorders of movement.

Fundamental characteristics of space-charge waves in photorefractive sillenite crystals

We investigate experimentally the fundamental characteristics of space-charge waves excited in a photorefractive crystal of Bi12SiO20. Features such as their transient rise and decay as well as their steady-state frequency response are investigated. Based on this, we find the dependence of the space-charge waves' quality factor on spatial frequency and electric-field biasing. The experimental findings are compared with the linear space-charge wave theory developed previously by Sturman et al. [J. Opt. Sec. Am. B 10, 1919 (1993)].

System identification of linear vibrating structures

Methods of dynamic modelling and analysis of structures, for example the finite element method, are well developed. However, it is generally agreed that accurate modelling of complex structures is difficult and for critical applications it is necessary to validate or update the theoretical models using data measured from actual structures. The techniques of identifying the parameters of linear dynamic models using Vibration test data have attracted considerable interest recently. However, no method has received a general acceptance due to a number of difficulties. These difficulties are mainly due to (i) Incomplete number of Vibration modes that can be excited and measured, (ii) Incomplete number of coordinates that can be measured, (iii) Inaccuracy in the experimental data (iv) Inaccuracy in the model structure. This thesis reports on a new approach to update the parameters of a finite element model as well as a lumped parameter model with a diagonal mass matrix. The structure and its theoretical model are equally perturbed by adding mass or stiffness and the incomplete number of eigen-data is measured. The parameters are then identified by an iterative updating of the initial estimates, by sensitivity analysis, using eigenvalues or both eigenvalues and eigenvectors of the structure before and after perturbation. It is shown that with a suitable choice of the perturbing coordinates exact parameters can be identified if the data and the model structure are exact. The theoretical basis of the technique is presented. To cope with measurement errors and possible inaccuracies in the model structure, a well known Bayesian approach is used to minimize the least squares difference between the updated and the initial parameters. The eigen-data of the structure with added mass or stiffness is also determined using the frequency response data of the unmodified structure by a structural modification technique. Thus, mass or stiffness do not have to be added physically. The mass-stiffness addition technique is demonstrated by simulation examples and Laboratory experiments on beams and an H-frame.

Fundamental characteristics of space-charge waves in photorefractive sillenite crystals

We investigate experimentally the fundamental characteristics of space-charge waves excited in a photorefractive crystal of Bi12SiO20. Features such as their transient rise and decay as well as their steady-state frequency response are investigated. Based on this, we find the dependence of the space-charge waves' quality factor on spatial frequency and electric-field biasing. The experimental findings are compared with the linear space-charge wave theory developed previously by Sturman et al. [J. Opt. Sec. Am. B 10, 1919 (1993)].

Price discovery for Chinese shares cross-listed in multiple markets

In this article we study the relationship between security returns cross-listed on the A share market of China and the H share market at the Stock Exchange of Hong Kong (SEHK). Most of these securities are also cross-listed on other markets. An important feature of this article is that we focus on the multilateral relationships between all cross-listed markets rather than concentrating only on the bi-lateral relationship between A and Hong Kong H shares. Using the impulse response functions and the variance decompositions from a Vector Autoregressive (VAR) process we show that the returns to the A share market are almost exclusively determined by domestic factors. In contrast, we find that the H share market is influenced by both the A share market within China and foreign stock markets elsewhere in the world. Impulse response functions suggest that innovations to the A share market and the Hong Kong H share market are partly transmitted to each other and to stock markets outside China. We show that liquidity has an important role to play in determining the impact that the home market has on cross-listed variance decompositions. © 2012 Copyright Taylor and Francis Group, LLC.

Modular ESS with second life batteries operating in grid independent mode

This work is part of a bigger project which aims to research the potential development of commercial opportunities for the re-use of batteries after their use in low carbon vehicles on an electricity grid or microgrid system. There are three main revenue streams (peak load lopping on the distribution Network to allow for network re-enforcement deferral, National Grid primary/ secondary/ high frequency response, customer energy management optimization). These incomes streams are dependent on the grid system being present. However, there is additional opportunity to be gained from also using these batteries to provide UPS backup when the grid is no longer present. Most UPS or ESS on the market use new batteries in conjunction with a two level converter interface. This produces a reliable backup solution in the case of loss of mains power, but may be expensive to implement. This paper introduces a modular multilevel cascade converter (MMCC) based ESS using second-life batteries for use on a grid independent industrial plant without any additional onsite generator as a potentially cheaper alternative. The number of modules has been designed for a given reliability target and these modules could be used to minimize/eliminate the output filter. An appropriate strategy to provide voltage and frequency control in a grid independent system is described and simulated under different disturbance conditions such as load switching, fault conditions or a large motor starting. A comparison of the results from the modular topology against a traditional two level converter is provided to prove similar performance criteria. The proposed ESS and control strategy is an acceptable way of providing backup power in the event of loss of grid. Additional financial benefit to the customer may be obtained by using a second life battery in this way.

A multi-modular second life hybrid battery energy storage system for utility grid applications

The modern grid system or the smart grid is likely to be populated with multiple distributed energy sources, e.g. wind power, PV power, Plug-in Electric Vehicle (PEV). It will also include a variety of linear and nonlinear loads. The intermittent nature of renewable energies like PV, wind turbine and increased penetration of Electric Vehicle (EV) makes the stable operation of utility grid system challenging. In order to ensure a stable operation of the utility grid system and to support smart grid functionalities such as, fault ride-through, frequency response, reactive power support, and mitigation of power quality issues, an energy storage system (ESS) could play an important role. A fast acting bidirectional energy storage system which can rapidly provide and absorb power and/or VARs for a sufficient time is a potentially valuable tool to support this functionality. Battery energy storage systems (BESS) are one of a range suitable energy storage system because it can provide and absorb power for sufficient time as well as able to respond reasonably fast. Conventional BESS already exist on the grid system are made up primarily of new batteries. The cost of these batteries can be high which makes most BESS an expensive solution. In order to assist moving towards a low carbon economy and to reduce battery cost this work aims to research the opportunities for the re-use of batteries after their primary use in low and ultra-low carbon vehicles (EV/HEV) on the electricity grid system. This research aims to develop a new generation of second life battery energy storage systems (SLBESS) which could interface to the low/medium voltage network to provide necessary grid support in a reliable and in cost-effective manner. The reliability/performance of these batteries is not clear, but is almost certainly worse than a new battery. Manufacturers indicate that a mixture of gradual degradation and sudden failure are both possible and failure mechanisms are likely to be related to how hard the batteries were driven inside the vehicle. There are several figures from a number of sources including the DECC (Department of Energy and Climate Control) and Arup and Cenex reports indicate anything from 70,000 to 2.6 million electric and hybrid vehicles on the road by 2020. Once the vehicle battery has degraded to around 70-80% of its capacity it is considered to be at the end of its first life application. This leaves capacity available for a second life at a much cheaper cost than a new BESS Assuming a battery capability of around 5-18kWhr (MHEV 5kWh - BEV 18kWh battery) and approximate 10 year life span, this equates to a projection of battery storage capability available for second life of >1GWhrs by 2025. Moreover, each vehicle manufacturer has different specifications for battery chemistry, number and arrangement of battery cells, capacity, voltage, size etc. To enable research and investment in this area and to maximize the remaining life of these batteries, one of the design challenges is to combine these hybrid batteries into a grid-tie converter where their different performance characteristics, and parameter variation can be catered for and a hot swapping mechanism is available so that as a battery ends it second life, it can be replaced without affecting the overall system operation. This integration of either single types of batteries with vastly different performance capability or a hybrid battery system to a grid-tie 3 energy storage system is different to currently existing work on battery energy storage systems (BESS) which deals with a single type of battery with common characteristics. This thesis addresses and solves the power electronic design challenges in integrating second life hybrid batteries into a grid-tie energy storage unit for the first time. This study details a suitable multi-modular power electronic converter and its various switching strategies which can integrate widely different batteries to a grid-tie inverter irrespective of their characteristics, voltage levels and reliability. The proposed converter provides a high efficiency, enhanced control flexibility and has the capability to operate in different operational modes from the input to output. Designing an appropriate control system for this kind of hybrid battery storage system is also important because of the variation of battery types, differences in characteristics and different levels of degradations. This thesis proposes a generalised distributed power sharing strategy based on weighting function aims to optimally use a set of hybrid batteries according to their relative characteristics while providing the necessary grid support by distributing the power between the batteries. The strategy is adaptive in nature and varies as the individual battery characteristics change in real time as a result of degradation for example. A suitable bidirectional distributed control strategy or a module independent control technique has been developed corresponding to each mode of operation of the proposed modular converter. Stability is an important consideration in control of all power converters and as such this thesis investigates the control stability of the multi-modular converter in detailed. Many controllers use PI/PID based techniques with fixed control parameters. However, this is not found to be suitable from a stability point-of-view. Issues of control stability using this controller type under one of the operating modes has led to the development of an alternative adaptive and nonlinear Lyapunov based control for the modular power converter. Finally, a detailed simulation and experimental validation of the proposed power converter operation, power sharing strategy, proposed control structures and control stability issue have been undertaken using a grid connected laboratory based multi-modular hybrid battery energy storage system prototype. The experimental validation has demonstrated the feasibility of this new energy storage system operation for use in future grid applications.

Impact of electric vehicles on GB electricity demand and associated benefits for system control

This paper investigates the impact that electric vehicle uptake will have on the national electricity demand of Great Britain. Data from the National Travel Survey, and the Coventry and Birmingham Low Emissions Demonstration (CABLED) are used to model an electrical demand profile in a future scenario of significant electric vehicle market penetration. These two methods allow comparison of how conventional cars are currently used, and the resulting electrical demand with simple substitution of energy source, with data showing how electric vehicles are actually being used at present. The report finds that electric vehicles are unlikely to significantly impact electricity demand in GB. The paper also aims to determine whether electric vehicles have the potential to provide ancillary services to the grid operator, and if so, the capacity for such services that would be available. Demand side management, frequency response and Short term Operating Reserve (STOR) are the services considered. The report finds that electric cars are unlikely to provide enough moveable demand peak shedding to be worthwhile. However, it is found that controlling vehicle charging would provide sufficient power control to viably act as frequency response for dispatch by the transmission system operator. This paper concludes that electric vehicles have technical potential to aid management of the transmission network without adding a significant demand burden. © 2013 IEEE.