Post-1945 Danish Piano Trio Literature: A Recording Dissertation

This recording dissertation surveys post-1945 literature written for piano trio (violin, violoncello and piano) by ten Danish composers. The literature was first considered for inclusion by searching a database provided by the Danish Music Information Center (www.mic.dk). Scores were rented from the publisher Edition Wilhelm Hansen AS, or purchased from the publisher Samfundet til Udgivelse af Dansk Musik. An additional score published by Viking Musikforlag was used as well. The music was then studied and evaluated for selection. During the selection process, the following criteria were considered: 1) quality of the compositions; 2) recognition of the composers at the national or international level; 3) whether the compositions had been previously recorded; and 4) variety of compositional styles. The selected works are written by Niels Viggo Bentzon, Vagn Holmboe, Anders Koppel, Herman D. Koppel, Bent Lorentzen, Anders Nordentoft, Per Norgard, Michael Nyvang, Karl Aage Rasmussen, and Poul Rovsing Olsen. The selected compositions were practiced, rehearsed, and performed under direct supervision of the composers and other expert musicians. In order to better understand the compositional style of each composer, relevant books, articles, and recordings were researched and studied. This recording dissertation is supported by a written document. A subjective preference for program balance was exercised to determine the order of recorded works. The written document is divided into chapters defined by composer, following the order of the recorded document, which include the composers' biographies and notes referring to the recorded compositions. The recording took place at the Manzius Gaarden, Birkerod, Denmark during three sessions: July 31-August 2, 2002, March 2 and 3, 2003, and June 2-4, 2003. The music for this dissertation was recorded by the members of the Jalina Trio; Line Fredens, violin, Janne Fredens, cello and Natsuki Fukasawa, piano. Aksel Trige, a well-respected recording engineer, was engaged for the recording and editing. Additionally, a Hamburg Steinway concert grand piano was rented and a Joseph Guarnerius filius Andreas Cremona violin (1706) was provided by the Augustinus Fonden, Denmark. The cellist used her own instrument, Vuillaume of Paris (c. 1850). The expense of this recording was partially paid by generous grants from the Augustinus Fonden, the Solist Foreningen af 1921, and the Dansk Musikerforbunds Kollective Rettighedsmidler. The compositions selected for this recording dissertation are assumed to be previously unrecorded, with the exception of Poul Rovsing Olsen's Trio II.

Global value Chains, rising power firms and economic and social upgrading

© Emerald Group Publishing Limited.Purpose – The purpose of this paper is to introduce the global value chain (GVC) approach to understand the relationship between multinational enterprises (MNEs) and the changing patterns of global trade, investment and production, and its impact on economic and social upgrading. It aims to illuminate how GVCs can advance our understanding about MNEs and rising power (RP) firms and their impact on economic and social upgrading in fragmented and dispersed global production systems. Design/methodology/approach – The paper reviews theGVCliterature focusing on two conceptual elements of the GVC approach, governance and upgrading, and highlights three key recent developments in GVCs: concentration, regionalization and synergistic governance. Findings – The paper underscores the complicated role of GVCs in shaping economic and social upgrading for emerging economies, RP firms and developing country firms in general. Rising geographic and organizational concentration in GVCs leads to the uneven distribution of upgrading opportunities in favor of RP firms, and yet economic upgrading may be elusive even for the most established suppliers because of power asymmetry with global buyers. Shifting end markets and the regionalization of value chains can benefit RP firms by presenting alternative markets for upgrading. Yet, without further upgrading, such benefits may be achieved at the expense of social downgrading. Finally, the ineffectiveness of private standards to achieve social upgrading has led to calls for synergistic governance through the cooperation of private, public and social actors, both global and local. Originality/value – The paper illuminates how the GVC approach and its key concepts can contribute to the critical international business and RP firms literature by examining the latest dynamics in GVCs and their impacts on economic and social development in developing countries.

Characteristics of the biphasic action of androgens and of the potent antiproliferative effects of the new pure antiestrogen EM-139 on cell cycle kinetic parameters in LNCaP human prostatic cancer cells

The most potent steroid in human prostatic carcinoma LNCaP cells, i.e. dihydrotestosterone (DHT), has a biphasic stimulatory effect on cell proliferation. At the maximal stimulatory concentration of 0.1 nM DHT, analysis of cell kinetic parameters shows a decrease of the G0-G1 fraction with a corresponding increase of the S and G2 + M fractions. In contrast, concentrations of 1 nM DHT or higher induce a return of cell proliferation to control levels, reflected by an increase in the G0-G1 fraction at the expense of the S and especially the G2 + M fractions. Continuous labeling for 144 h with the nucleotide analogue 5'-bromodeoxyuridine shows that the percentage of cycling LNCaP cells rises more than 90% after treatment with stimulatory concentrations of DHT, whereas in control cells as well as in cells treated with high concentrations of the androgen, this value remains below 50%. Although LNCaP cells do not contain detectable estrogen receptors, the new pure steroidal antiestrogen EM-139 not only reversed the stimulation of cell proliferation and cell kinetics induced by stimulatory doses of DHT but also inhibited basal cell proliferation.

Deforestation and the spatio-temporal distribution of savannah and forest members of the Simulium damnosum complex in southern Ghana and south-western Togo

Spatio-temporal data on cytotaxonomic identifications of larvae of different members of the Simulium damnosum complex collected from rivers in southern Ghana and south-western Togo from 1975 until 1997 were analysed. When the data were combined, the percentages of savannah blackflies (S. damnosum sensu stricto and S. sirbanum) in the samples were shown to have been progressively increasing since 1975. The increases were statistically significant (P < 0·001), but the rates of increase were not linear. Further analyses were conducted according to the collection seasons and locations of the samples, to account for possible biases such as savannah flies occurring further south in the dry season or a preponderance of later samples from northern rivers having more savannah flies. These analyses showed that the increasing trend was statistically significant (P< 0·0001) only during the periods April to June and October to December. The presence of adult savannah flies carrying infective larvae (L3) indistinguishable from those of Onchocerca volvulus in the study zone was confirmed by examinations of captured flies. The percentages of savannah flies amongst the human-biting populations and the percentages with L3s in the head were higher during dry seasons than wet seasons and the savannah species were found furthest south (5 °25′N) in the dry season. Comparisons of satellite images taken in 1973 and 1990 over a study area in south-western Ghana encompassing stretches of the Tano and Bia rivers demonstrated that there have been substantial increases in urban and savannah areas, at the expense of forest. This was so not only for the whole images but also for subsamples of the images taken at 1, 2, 4, 8 and 16 km distant from sites alongside the River Tano. At every distance from the river, the percentages of pixels classified as urban or savannah have increased in 1990 compared with 1973, while those classified as degraded or dense forest have decreased. The possibility that the proportionate increases in savannah forms of the vectors of onchocerciasis, and hence in the likelihood of the transmission of savannah strains of the disease in formerly forested areas, were related to the decreases in forest cover is discussed.

The development of parallel implementation for a CFD based fire field model utilising conventional office based PCs

Parallel processing techniques have been used in the past to provide high performance computing resources for activities such as fire-field modelling. This has traditionally been achieved using specialized hardware and software, the expense of which would be difficult to justify for many fire engineering practices. In this article we demonstrate how typical office-based PCs attached to a Local Area Network has the potential to offer the benefits of parallel processing with minimal costs associated with the purchase of additional hardware or software. It was found that good speedups could be achieved on homogeneous networks of PCs, for example a problem composed of ~100,000 cells would run 9.3 times faster on a network of 12 800MHz PCs than on a single 800MHz PC. It was also found that a network of eight 3.2GHz Pentium 4 PCs would run 7.04 times faster than a single 3.2GHz Pentium computer. A dynamic load balancing scheme was also devised to allow the effective use of the software on heterogeneous PC networks. This scheme also ensured that the impact between the parallel processing task and other computer users on the network was minimized.

Parallel CFD fire modelling on office PCs with dynamic load balancing

Parallel processing techniques have been used in the past to provide high performance computing resources for activities such as Computational Fluid Dynamics. This is normally achieved using specialized hardware and software, the expense of which would be difficult to justify for many fire engineering practices. In this paper, we demonstrate how typical office-based PCs attached to a local area network have the potential to offer the benefits of parallel processing with minimal costs associated with the purchase of additional hardware or software. A dynamic load balancing scheme was devised to allow the effective use of the software on heterogeneous PC networks. This scheme ensured that the impact between the parallel processing task and other computer users on the network was minimized thus allowing practical parallel processing within a conventional office environment. Copyright © 2006 John Wiley & Sons, Ltd.

On the application of variable frequency microwave technology for processing of individual surface mount components

Dual-section variable frequency microwave systems enable rapid, controllable heating of materials within an individual surface mount component in a chip-on=board assembly. The ability to process devices individually allows components with disparate processing requirements to be mounted on the same assembly. The temperature profile induced by the microwave system can be specifically tailored to the needs of the component, allowing optimisation and degree of cure whilst minimising thermomechanical stresses. This paper presents a review of dual-section microwave technology and its application to curing of thermosetting polymer materials in microelectronics applications. Curing processes using both conventional and microwave technologies are assessed and compared. Results indicate that dual-section microwave systems are able to cure individual surface mount packages in a significantly shorter time, at the expense of an increase in thermomechanical stresses and a greater variation in degree of cure.

Oral agreements: estoppel, constructive trusts and restitution

Analyses the House of Lords judgment in Cobbe v Yeoman's Row Management Ltd in relation to claims by the prospective purchaser under an oral agreement for sale of a block of flats based on proprietary estoppel, a constructive trust and common law restitution brought against the owner of the property who sought to resile from the agreement after the purchaser had, at considerable expense, obtained planning permission to redevelop the property in reliance on assurances given by the owner that if permission was granted the sale would be honoured.

Microwave curing of thermosetting polymer materials in microelectronics applications

Thermosetting polymer materials are widely utilised in modern microelectronics packaging technology. These materials are used for a number of functions, such as for device bonding, for structural support applications and for physical protection of semiconductor dies. Typically, convection heating systems are used to raise the temperature of the materials to expedite the polymerisation process. The convection cure process has a number of drawbacks including process durations generally in excess of 1 hour and the requirement to heat the entire printed circuit board assembly, inducing thermomechanical stresses which effect device reliability. Microwave energy is able to raise the temperature of materials in a rapid, controlled manner. As the microwave energy penetrates into the polymer materials, the heating can be considered volumetric – i.e. the rate of heating is approximately constant throughout the material. This enables a maximal heating rate far greater than is available with convection oven systems which only raise the surface temperature of the polymer material and rely on thermal conductivity to transfer heat energy into the bulk. The high heating rate, combined with the ability to vary the operating power of the microwave system, enables the extremely rapid cure processes. Microwave curing of a commercially available encapsulation material has been studied experimentally and through use of numerical modelling techniques. The material assessed is Henkel EO-1080, a single component thermosetting epoxy. The producer has suggested three typical convection oven cure options for EO1080: 20 min at 150C or 90 min at 140C or 120 min at 110C. Rapid curing of materials of this type using advanced microwave systems, such as the FAMOBS system [1], is of great interest to microelectronics system manufacturers as it has the potential to reduce manufacturing costs, increase device reliability and enables new device designs. Experimental analysis has demonstrated that, in a realistic chip-on-board encapsulation scenario, the polymer material can be fully cured in approximately one minute. This corresponds to a reduction in cure time of approximately 95 percent relative to the convection oven process. Numerical assessment of the process [2] also suggests that cure times of approximately 70 seconds are feasible whilst indicating that the decrease in process duration comes at the expense of variation in degree of cure within the polymer.

We could make a meal out of nothing: contested explanations of inequalities in health

This paper reports on the qualitative findings from a comparative study of public health and lifestyles in South East England and Northern France, regions with similar geographic and economic characteristics. Data from health surveys showed that both countries had an increasing BMI with age, particularly in Northern France. This was despite the finding that the percentage eating fresh fruit and vegetable at least five days a week in Northern France increased with age (from well over 50% to over 90%) compared to around 50% to around 75% in South East England. Qualitative data on health inequalities and how they could be addressed were gathered by focus groups sampling from five tiers using the Townsend Index for comparability (14 in England with 106 participants overall; 13 in France with 143 participants). Both had about two thirds women participants, with a preponderance of middle aged and older people. There was a striking difference in the salience of diet between the two countries; in the French data it was raised only 14 times, whereas in England there were 165 occurrences, and these were often distinguished by their use of narrative. Older respondents contrasted the pressures on families today and the expense of fresh fruit and vegetables with their own childhood or childrearing, when cheap meals could be created using skills which have now been lost. These data therefore provide further evidence that providing food is a moral activity.

Could benzalkonium chloride be a suitable alternative to mercuric chloride for preservation of seawater samples?

Instrumental equipment unsuitable or unavailable for fieldwork as well as lack of ship space can necessitate the preservation of seawater samples prior to analysis in a shore-based laboratory. Mercuric chloride (HgCl2/ is routinely used for such preservation, but its handling and subsequent disposal incur environmental risks and significant expense. There is therefore a strong motivation to find less hazardous alternatives. Benzalkonium chloride (BAC) has been used previously as microbial inhibitor for freshwater samples. Here, we assess the use of BAC for marine samples prior to the measurement of oxygen-to-argon (O2 = Ar) ratios, as used for the determination of biological net community production. BAC at a concentration of 50 mg dm-3 inhibited microbial activity for at least 3 days in samples tested with chlorophyll a (Chl a) concentrations up to 1 mgm-3. BAC concentrations of 100 and 200 mg dm

The Islay wave power project: an engineering prospective

The design, construction and subsequent operation of the 75 kW oscillating water column wave power plant on the Isle of Islay has provided a significant insight into the practicality of wave power conversion. The development of wave power plant poses a significant design and construction challenge for not only civil but also mechanical and electrical engineers. The plant must withstand the immense forces imposed during storms, yet efficiently convert the slow cyclic motion of waves into a useful energy source such as electricity and do so at a price competitive with other forms of generation. In addition, the hostile marine environment hampers the construction process and the variability of the wave resource poses problems for electrical control and grid integration. Many sceptics consider wave power conversion to be too difficult, too expensive and too variable to justify the effort and expense necessary to develop this technology. However, the authors contend that with modular wave power systems developed from the practical experience gained with the Islay plant, wave power is a viable technology with a considerable world market potential. However, this technology is still at the early stages of development and will require the construction of a number of different prototypes before there is extensive commercial exploitation.

Symbolic violence and the neighbourhood: young working class girls' attitudes to education in Belfast

This article focuses on the experiences of 7-8 year old working-class girls in Belfast, Northern Ireland and their attitudes towards education. It shows how their emerging identities tend to emphasize relationships, marriage and motherhood at the expense of a concern with education and future careers. The article suggests that one important factor that can help explain this is the influence of the local neighbourhood. In drawing upon Bourdieu's concepts of symbolic violence and habitus and Elias' notion of figuration, the article shows how the local neighbourhood represents the parameters of the girls' social worlds. It provides the context within which the girls tend to focus on social relations within their community and particularly on family relationships, marriage and children. It also provides the context within which the girls tend to develop strong interdependent relationships with their mothers that also tend to encourage and reinforce the girls' particular gendered identities. The article concludes by arguing that there is a need for more research on working-class girls and education to look beyond the school to incorporate, more fully, an understanding of the influence of the family and local neighbourhood on their attitudes towards education and their future career aspirations.

Polyploid measles virus with hexameric genome length

Particles of most virus species accurately package a single genome, but there are indications that the pleomorphic particles of parainfluenza viruses incorporate multiple genomes. We characterized a stable measles virus mutant that efficiently packages at least two genomes. The first genome is recombinant and codes for a defective attachment protein with an appended domain interfering with fusion-support function. The second has one adenosine insertion in a purine run that interrupts translation of the appended domain and restores function. In that genome, a one base deletion in a different purine run abolishes polymerase synthesis, but restores hexameric genome length, thus ensuring accurate RNA encapsidation, which is necessary for efficient replication. Thus, the two genomes are complementary. The infection kinetics of this mutant indicate that packaging of multiple genomes does not negatively affect growth. We also show that polyploid particles are produced in standard infections at no expense to infectivity. Our results illustrate how the particles of parainfluenza viruses efficiently accommodate cargoes of different volume, and suggest a mechanism by which segmented genomes may have evolved.

High concentrations of dexamethasone suppresses the proliferation but not the differentiation of further maturation of human osteoblast precursor in vitro: relevance to glucocorticoid-induced osteoporosis

Objective. The use of glucocorticoids (GCs) in the treatment of RA is a frequent cause of bone loss. In vitro, however, this same class of steroids has been shown to promote the recruitment and/or maturation of primitive osteogenic precursors present in the colony forming unit-fibroblastic (CFU-F) fraction of human bone and marrow. In an effort to reconcile these conflicting observations, we investigated the effects of the synthetic GC dexamethasone (Dx) on parameters of growth and osteogenic differentiation in cultures of bone marrow stromal cells derived from a large cohort of adult human donors (n=30). Methods. Marrow suspensions were cultured in the absence and presence of Dx at concentrations between 10 pm and 1 µm. After 28 days we determined the number and diameter of colonies formed, the total number of cells, the surface expression of receptors for selected growth factors and extracellular matrix proteins and, based on the expression of the developmental markers alkaline phosphatase (AP) and the antigen recognized by the STRO-1 monoclonal antibody, the proportion of cells undergoing osteogenic differentiation and their extent of maturation. Results. At a physiologically equivalent concentration, Dx had no effect on the adhesion of CFU-F or on their subsequent proliferation, but did promote their osteogenic differentiation and further maturation. These effects were independent of changes in the expression of the receptors for fibroblast growth factors, insulin-like growth factor 1, nerve growth factor, platelet-derived growth factors and parathyroid hormone/parathyroid hormone-related protein, but were associated with changes in the number of cells expressing the 2 and 4, but not ß1, integrin subunits. At supraphysiological concentrations, the effects of Dx on the osteogenic recruitment and maturation of CFU-F and their progeny were maintained but at the expense of a decrease in cell number. Conclusions. A decrease in the proliferation of osteogenic precursors, but not in their differentiation or maturation, is likely to be a key factor in the genesis of GC-induced bone loss.