AVALIAÇÃO DA PROPORÇÃO DENTAL DE BOLTON EM INDIVÍDUOS COM OCLUSÃO NORMAL NATURAL E MALOCLUSÕES DE CLASSE I E CLASSE II DIVISÃO 1 DE ANGLE.

Introdução: A análise de Bolton, análise que quantifica o tamanho dentário, é uma referência importante para profissionais que buscam finalizações ortodônticas adequadas. Objetivo: O objetivo deste trabalho é verificar se há discrepância entre os indivíduos com oclusão normal natural e maloclusões de Classe I e de Classe II divisão 1 de Angle pertencentes a amostra selecionada, em relação aos valores encontrados por Bolton, bem como verificar também se há dimorfismo sexual. Metodologia: 3 grupos contendo 35 pares e modelos em gesso cada, separados pelo tipo de oclusão, pertencentes ao acervo do programa de pós-graduação em Ortodontia da Universidade Metodista de São Paulo foram medidos com paquímetro digital em sua maior distância mésiodistal desde 1º molar direito a 1º molar esquerdo, dos arcos superiores e inferiores, com dentição permanente. Os valores foram tabulados e a proporção de Bolton foi aplicada. Resultados: Respectivamente para os grupos 1, 2 e 3, a proporção total encontrada foi de 90,36 (DP±1,70), 91,17 (DP±2,58) e 90,76 (DP±2,45), e a proporção anterior foi de 77,73 (DP±2,39), 78,01 (DP±2,66) e 77,30 (DP±2,65). Conclusão: não houve dimorfismo sexual nem diferença estatisticamente significante comparando os valores aos sugeridos por Bolton.

A frame analysis of the leadership styles of dental and medical school deans

The purpose of this study was to determine how dental and medical school deans perceived their own leadership styles and how many management/leadership perspectives they used when approaching a problem. A descriptive and correlational study was conducted which examined the leadership orientations or "frames" utilized by these deans. Four frames--the structural, the human resource, the political, and the symbolic--emerged from leadership studies which described the behavior of leaders in organizational actions and problem solving.^ Employing the repeated measures ANCOVA, it was found that there were no significant interactions between type of dean and perceptions or perspectives. However, the main effects of both leadership style perceptions and the use of perspectives were significant. This indicated that over the total sample of deans, both perceptions and perspectives were used differently; the deans perceived themselves and used perspectives the highest for the human resource frame and the lowest for the political frame. Also, dental deans' mean use overall of the four perspective frames was higher than the medical deans. In addition to the ANCOVA, t-tests performed on perceptions revealed that the deans perceived the frames differently in three human resource items. Pearson's correlations indicated that for the combined sample of deans, significant negative correlations existed when the human resource or symbolic frame was compared to the structural frame. All of the deans used multiple frames, allowing them to re-frame or combine frames according to the situation. ^

Cognitive and noncognitive variables that predict Florida community college radiography program graduates' success on the Registry

This study examined the predictive merits of selected cognitive and noncognitive variables on the national Registry exam pass rate using 2008 graduates (n = 175) from community college radiography programs in Florida. The independent variables included two GPAs, final grades in five radiography courses, self-efficacy, and social support. The dependent variable was the first-attempt results on the national Registry exam. The design was a retrospective predictive study that relied on academic data collected from participants using the self-report method and on perceptions of students' success on the national Registry exam collected through a questionnaire developed and piloted in the study. All independent variables except self-efficacy and social support correlated with success on the national Registry exam ( p < .01) using the Pearson Product-Moment Correlation analysis. The strongest predictor of the national Registry exam success was the end-of-program GPA, r = .550, p < .001. The GPAs and scores for self-efficacy and social support were entered into a logistic regression analysis to produce a prediction model. The end-of-program GPA (p = .015) emerged as a significant variable. This model predicted 44% of the students who failed the national Registry exam and 97.3% of those who passed, explaining 45.8% of the variance. A second model included the final grades for the radiography courses, self efficacy, and social support. Three courses significantly predicted national Registry exam success; Radiographic Exposures, p < .001; Radiologic Physics, p = .014; and Radiation Safety & Protection, p = .044, explaining 56.8% of the variance. This model predicted 64% of the students who failed the national Registry exam and 96% of those who passed. The findings support the use of in-program data as accurate predictors of success on the national Registry exam.

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

An Investigation of Child and Adolescent Dental Sealant Predictors, NHANES 2011-2012

Objective: To examine sociodemographic and dental factors for associations with dental sealant placement in children and adolescents aged 6-18 years old. Methods: Secondary data analysis of 2011-2012 NHANES data was conducted. Multiple logistic regression models were used to assess relationships between predictor variables and sealant presence. Results: More than a third (37.1%) of children and adolescents have at least one sealant present; 67.9% of children compared with 40.4% of adolescents. Racial/ethnic differences exist, with Non-Hispanic black youth having the lowest odds of having sealants. Sealant placement odds vary by presence of dental home; the magnitude of the odds varies by age group. Those with untreated decay have lower odds of having sealants than those who do not have untreated decay (child OR: 2.6, 95% CI: 1.83-3.72; adolescent OR: 3.9, 95% CI: 2.59-6.07). Conclusion: Disparities exist in odds of sealant prevalence across racial/ethnic groups, income levels, and dental disease and visit characteristics. Further research is necessary to understand the reasons for these differences and to inform future interventions.

Efectos del blanqueamiento dental sobre el tejido pulpar

El blanqueamiento dental es un proceso dinámico que busca la eliminación de manchas de la estructura dental mediante el empleo de productos químicos, principalmente el peróxido de hidrógeno, el cual fue utilizado por primera vez en 1884 y hasta la fecha continúa siendo el principal componente activo de muchos productos usados para terapias de blanqueamiento dental, y es utilizado en su forma pura o como producto final de la degradación de otras sustancias empleadas para blanqueamiento, como el peróxido de carbamida. Al entrar en contacto con los tejidos dentales el peróxido de hidrógeno se disocia en radicales libres, como las especies reactivas de oxígeno, las cuales pueden difundirse a través de esmalte, dentina e incluso llegar al tejido pulpar, provocando efectos adversos como son sensibilidad dental, daño a los componentes celulares y alteración del flujo sanguíneo; estos efectos deletéreos están relacionados con el número de sesiones, concentración del producto, tiempo de colocación y el tipo de activación (química, luz, calor y láser).

Avaliação in vitro da adaptação marginal e interna de coroas de cerâmica e resina composta fabricadas com o sistema CAD/CAM utilizando duas câmeras intraorais de moldagem digital

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Ciências da Saúde, Programa de Pós-Graduação em Ciências da Saúde, 2015.

Acuerdo Especifico al Convenio firmado en julio del 2008 entre la Universidad de Lille 2-Facultad de Cirugía Dental- y la Universidad de Cuenca-Facultad de Odontología

Español

Personalização e previsibilidade do sorriso digital smile design

A estética é algo que interfere no bem-estar das pessoas e o sorriso não é excepção, sendo até considerado um factor estético essencial nos dias de hoje, perante uma sociedade cada vez mais exigente relativamente aos padrões de beleza. A área da estética dentária, encontra-se em constantes mudanças devido à evolução da qualidade dos materiais e das técnicas utilizadas, levando a melhorias na reprodução das características naturais dos dentes. O médico dentista tem a responsabilidade de adquirir conhecimento e habilidades profissionais para a elaboração de tratamentos estéticos dentários que satisfaçam as expectativas dos pacientes quanto ao seu sorriso. Actualmente, o médico dentista possui várias opções para planear os tratamentos, entre as quais, o planeamento digital através do Digital Smile Design. O Digital Smile Design (DSD), criado pelo Doutor Christian Coachman, veio responder à procura elevada por tratamentos cada vez mais personalizados por parte dos pacientes. O DSD amplia a visão relativamente aos diagnósticos, melhora a comunicação entre as diferentes especialidades na área da medicina dentária e cria planos previsíveis durante o tratamento dentário. Trata-se de um programma onde são trabalhadas imagens fotográficas do paciente para a elaboração de um tratamento estético que responda as necessidades biológicas, funcionais e emocionais do paciente. Este poderá acompanhar e visualizar todos os passos do tratamento e deste modo, torna-se parte integrante do processo. O paciente expressa a sua opinião e as suas expectativas quanto ao resultado final. Neste trabalho realizou-se uma revisão narrativa da literatura sobre a técnica Digital Smile Design utilizando as palavras-chaves: Digital Smile Design; Visagism; dental planning; meaning of smile; mock-up. Os objetivos deste trabalho foi o de conhecer a técnica Digital Smile Design, os princípios do visagismo e a importância do planeamento nestes contextos. O sucesso de um tratamento está dependente de um correcto planeamento e de uma execução clínica e laboratorial cuidadosa.

Experimental evaluation of the z-resolution in different clinical Digital Breast Tomosynthesis systems using commercial phantoms

Digital Breast Tomosynthesis (DBT) is an advanced mammography technique based on the reconstruction of a pseudo-volumetric image. To date, image quality represents the most deficient section of DBT quality control protocols. In fact, related tests are not yet characterized by either action levels or typical values. This thesis work focuses on the evaluation of one aspect of image quality: the z-resolution. The latter is studied in terms of Artifact Spread Function (ASF), a function that describes the signal spread of a detail along the reconstructed focal planes. To quantify the ASF numerically, its Full Width at Half Maximum (FWHM) is calculated and used as a representative index of z-resolution. Experimental measurements were acquired in 24 DBT systems, of 7 different models, currently in use in 20 hospital facilities in Italy. The analysis, performed on the clinical reconstructed images, of 5 different commercial phantoms, lead to the identification of characteristic FWHM values for each type of DBT system. The ASF clearly showed a dependence on the size of the detail, providing higher FWHM values for larger objects. The z-resolution was found to be positively influenced by the acquisition angle: Fujifilm sistematically showed wider ASF profiles in ST mode (15°) than in HR mode (40°). However, no clear relationship was found between angular range and ASF, among different DBT systems, due to the influence of the peculiarities of each reconstruction algorithm. The experimental approach shown in this thesis work can be proposed as a z-resolution quality control test procedure. Contextually, the values found could be used as a starting point for identifying typical values to be included in the test, in a DBT protocol. Clearly, a statistically significant number of images is needed to do this. The equipment involved in this work is located in hospitals and is not available for research purposes, so only a limited amount of data was acquired and processed.

Trauma dental: tomada de decisão

Este objeto apresenta um exercício de tomada de decisão no qual o dentista deve fazer escolhas baseadas em um conjunto de informações fornecidas a respeito do caso clínico relacionado ao trauma dental do personagem Tiago de Souza, cujo prontuário digital está disponível para consulta. Na contextualização, o usuário sofreu um trauma nos incisivos centrais superiores e sua mãe traz consigo um dos fragmentos do dente fraturado (dente 21), não tendo encontrado o outro fragmento, sendo que o dente 11 apresenta exposição pulpar. Questiona o dentista sobre, ao deparar-se com esta situação, o que deve ser prioritário, e sobre qual procedimento inicia a abordagem clínica do caso. Também indaga sobre, uma vez realizado o tratamento dos dentes 11 e 21, qual deve ser o tratamento sequencial. Conclui destacando que a capacidade de tomar decisões resolutivas e no tempo certo é importante para o sucesso da intervenção nos casos de trauma dental, ressaltando que cada decisão implica um efeito e é necessário que o dentista reduza riscos listando os efeitos possíveis de cada ação, avaliando as probabilidades de sua ocorrência e o dano que possa causar.

Evaluation Of The Effect Of Different Methods Of Microabrasion And Polishing On Surface Roughness Of Dental Enamel.

The microabrasion technique of enamel consists of selectively abrading the discolored areas or causing superficial structural changes in a selective way. In microabrasion technique, abrasive products associated with acids are used, and the evaluation of enamel roughness after this treatment, as well as surface polishing, is necessary. This in-vitro study evaluated the enamel roughness after microabrasion, followed by different polishing techniques. Roughness analyses were performed before microabrasion (L1), after microabrasion (L2), and after polishing (L3).Thus, 60 bovine incisive teeth divided into two groups were selected (n=30): G1- 37% phosphoric acid (37%) (Dentsply) and pumice; G2- hydrochloric acid (6.6%) associated with silicon carbide (Opalustre - Ultradent). Thereafter, the groups were divided into three sub-groups (n=10), according to the system of polishing: A - Fine and superfine granulation aluminum oxide discs (SofLex 3M); B - Diamond Paste (FGM) associated with felt discs (FGM); C - Silicone tips (Enhance - Dentsply). A PROC MIXED procedure was applied after data exploratory analysis, as well as the Tukey-Kramer test (5%). No statistical differences were found between G1 and G2 groups. L2 differed statistically from L1 and showed superior amounts of roughness. Differences in the amounts of post-polishing roughness for specific groups (1A, 2B, and 1C) arose, which demonstrated less roughness in L3 and differed statistically from L2 in the polishing system. All products increased enamel roughness, and the effectiveness of the polishing systems was dependent upon the abrasive used.

Micromorphology Of The Dental Pulp Is Highly Preserved In Cancer Patients Who Underwent Head And Neck Radiotherapy.

Teeth are often included in the radiation field during head and neck radiotherapy, and recent clinical evidence suggests that dental pulp is negatively affected by the direct effects of radiation, leading to impaired sensitivity of the dental pulp. Therefore, this study aimed to investigate the direct effects of radiation on the microvasculature, innervation, and extracellular matrix of the dental pulp of patients who have undergone head and neck radiotherapy. Twenty-three samples of dental pulp from patients who finished head and neck radiotherapy were analyzed. Samples were histologically processed and stained with hematoxylin-eosin for morphologic evaluation of the microvasculature, innervation, and extracellular matrix. Subsequently, immunohistochemical analysis of proteins related to vascularization (CD34 and smooth muscle actin), innervation (S-100, NCAM/CD56, and neurofilament), and extracellular matrix (vimentin) of the dental pulp was performed. The morphologic study identified preservation of the microvasculature, nerve bundles, and components of the extracellular matrix in all studied samples. The immunohistochemical analysis confirmed the morphologic findings and showed a normal pattern of expression for the studied proteins in all samples. Direct effects of radiotherapy are not able to generate morphologic changes in the microvasculature, innervation, and extracellular matrix components of the dental pulp in head and neck cancer patients.

Characterization Of Morphology And Composition Of Inorganic Fillers In Dental Alginates.

Energy dispersive X-ray spectroscopy microanalysis (EDX), scanning electron microscopy (SEM), and Archimedes' Principle were used to determine the characteristics of inorganic filler particles in five dental alginates, including Cavex ColorChange (C), Hydrogum 5 (H5), Hydrogum (H), Orthoprint (O), and Jeltrate Plus (JP). The different alginate powders (0.5 mg) were fixed on plastic stubs (n = 5) and sputter coated with carbon for EDX analysis, then coated with gold, and observed using SEM. Volume fractions were determined by weighing a sample of each material in water before and after calcining at 450(°)C for 3 h. The alginate materials were mainly composed of silicon (Si) by weight (C-81.59%, H-79.89%, O-78.87%, H5-77.95%, JP-66.88%, wt). The filler fractions in volume (vt) were as follows: H5-84.85%, JP-74.76%, H-70.03%, O-68.31%, and C-56.10%. The tested materials demonstrated important differences in the inorganic elemental composition, filler fraction, and particle morphology.

Cariology In Curriculum Of Brazilian Dental Schools.

Reasons for the iniquities of caries, globally recognized, may be related to how Cariology has been taught in dental schools. In Brazil, the most important universities, when considering healthcare teaching, are the public ones. The objective of this study was to identify the insertion of the contents of Cariology in the course flowcharts of public dental schools in the country. The survey was conducted in 2013 seeking to identify the realities of different geographical regions, aimed to the census of public dental schools. It was performed a documentary analysis of the menus of disciplines, identifying the following issues: number of dental schools that include content related to Cariology in their curricula; average total workload undergraduate courses and disciplines that contemplate the theme; distribution of disciplines in professional training cycles (basic, clinical and public health); existence of discipline and/or a specific department; verification of bibliographic indication directly related to Cariology. The response rate was 93.6%. All dental schools recommended specific books, and none of them had a Department of Cariology. All dental schools in the country contemplated content related to Cariology in their disciplines, distributed in specific disciplines (except for the Northern region) and disciplines in the three cycles of learning (basic, clinical and public health), with larger workload in the clinical cycle. Although public dental schools in Brazil demonstrated commitment to contemplating the content related to Cariology in their disciplines, the emphasis on the clinical cycle may not be promoting the integrated formation of students, which could be contributing to reflect the inequalities of the disease in the country.