Critical flux and fouling in ultrafiltration of proteins

In this thesis different parameters influencing critical flux in protein ultrafiltration and membrane foul-ing were studied. Short reviews of proteins, cross-flow ultrafiltration, flux decline and criticalflux and the basic theory of Partial Least Square analysis (PLS) are given at the beginning. The experiments were mainly performed using dilute solutions of globular proteins, commercial polymeric membranes and laboratory scale apparatuses. Fouling was studied by flux, streaming potential and FTIR-ATR measurements. Critical flux was evaluated by different kinds of stepwise procedures and by both con-stant pressure and constant flux methods. The critical flux was affected by transmembrane pressure, flow velocity, protein concentration, mem-brane hydrophobicity and protein and membrane charges. Generally, the lowest critical fluxes were obtained at the isoelectric points of the protein and the highest in the presence of electrostatic repulsion between the membrane surface and the protein molecules. In the laminar flow regime the critical flux increased with flow velocity, but not any more above this region. An increase in concentration de-creased the critical flux. Hydrophobic membranes showed fouling in all charge conditionsand, furthermore, especially at the beginning of the experiment even at very low transmembrane pressures. Fouling of these membranes was thought to be due to protein adsorption by hydrophobic interactions. The hydrophilic membranes used suffered more from reversible fouling and concentration polarisation than from irreversible foul-ing. They became fouled at higher transmembrane pressures becauseof pore blocking. In this thesis some new aspects on critical flux are presented that are important for ultrafiltration and fractionation of proteins.

Dinámica erosiva y aplicabilidad de modelos físicos de erosión en una cuenca de montaña mediterránea (Ribera Salada, Cuenca del Segre, Lleida, España)

Se estudia la dinámica de erosión por escorrentía superficial en unas laderas montañosas de la cabecera de la Ribera Salada (cuenca del Sagre), distinguiendo tres usos de suelo: (1) sotobosque de quejigo, (2) terrazas agrícolas y (3) márgenes de matorral. Se analiza la aplicabilidad de los modelos Erosion2D y EUROSEM. En cuanto al diseño experimental, durante seis meses se controlaron episodios naturales mediante un pluviógrafo y quince parcelas con canales Gerlach. Se realizaron, asimismo, seis simulaciones de lluvia que permitieron estudiar episodios de alta intensidad. De manera complementaria se llevaron a cabo las mediciones topográficas, los muestreos y las experimentaciones necesarias para caracterizar hidrológicamente la zona y aplicar los modelos de erosión. Como principales conclusiones se pueden señalar las siguientes: a) las tasas de escorrentía y erosión registradas fueron muy bajas, y se constató la importancia de procesos diferentes al flujo hortoniano, lo cual condiciona el uso de estos modelos, b) el modelo E2D no permite estudiar episodios de baja magnitud como los registrados, y su aplicación se debería restringir a terrenos menos porosos, c) la aplicación directa del modelo EUROSEM origina errores importantes; se ha calibrado un parámetro para reducir el error en el cálculo de la escorrentía, y d) el estudio de la variabilidad de la humedad precedente del suelo resulta de gran importancia para la modelización de estos procesos.

Assessment of subjective and hemodynamic tolerance of different high- and low-flux dialysis membranes in patients undergoing chronic intermittent hemodialysis: a randomized controlled trial.

Clinical experience and experimental data suggest that intradialytic hemodynamic profiles could be influenced by the characteristics of the dialysis membranes. Even within the worldwide used polysulfone family, intolerance to specific membranes was occasionally evoked. The aim of this study was to compare hemodynamically some of the commonly used polysulfone dialyzers in Switzerland. We performed an open-label, randomized, cross-over trial, including 25 hemodialysis patients. Four polysulfone dialyzers, A (Revaclear high-flux, Gambro, Stockholm, Sweden), B (Helixone high-flux, Fresenius), C (Xevonta high-flux, BBraun, Melsungen, Germany), and D (Helixone low-flux, Fresenius, Bad Homburg vor der Höhe, Germany), were compared. The hemodynamic profile was assessed and patients were asked to provide tolerance feedback. The mean score (±SD) subjectively assigned to dialysis quality on a 1-10 scale was A 8.4 ± 1.3, B 8.6 ± 1.3, C 8.5 ± 1.6, D 8.5 ± 1.5. Kt/V was A 1.58 ± 0.30, B 1.67 ± 0.33, C 1.62 ± 0.32, D 1.45 ± 0.31. The low- compared with the high-flux membranes, correlated to higher systolic (128.1 ± 13.1 vs. 125.6 ± 12.1 mmHg, P < 0.01) and diastolic (76.8 ± 8.7 vs. 75.3 ± 9.0 mmHg; P < 0.05) pressures, higher peripheral resistance (1.44 ± 0.19 vs. 1.40 ± 0.18 s × mmHg/mL; P < 0.05) and lower cardiac output (3.76 ± 0.62 vs. 3.82 ± 0.59 L/min; P < 0.05). Hypotension events (decrease in systolic blood pressure by >20 mmHg) were 70 with A, 87 with B, 73 with C, and 75 with D (P < 0.01 B vs. A, 0.05 B vs. C and 0.07 B vs. D). The low-flux membrane correlated to higher blood pressure levels compared with the high-flux ones. The Helixone high-flux membrane ensured the best efficiency. Unfortunately, the very same dialyzer correlated to a higher incidence of hypotensive episodes.

Direct noninvasive estimation of myocardial tricarboxylic acid cycle flux in vivo using hyperpolarized (13)C magnetic resonance.

BACKGROUND: The heart relies on continuous energy production and imbalances herein impair cardiac function directly. The tricarboxylic acid (TCA) cycle is the primary means of energy generation in the healthy myocardium, but direct noninvasive quantification of metabolic fluxes is challenging due to the low concentration of most metabolites. Hyperpolarized (13)C magnetic resonance spectroscopy (MRS) provides the opportunity to measure cellular metabolism in real time in vivo. The aim of this work was to noninvasively measure myocardial TCA cycle flux (VTCA) in vivo within a single minute. METHODS AND RESULTS: Hyperpolarized [1-(13)C]acetate was administered at different concentrations in healthy rats. (13)C incorporation into [1-(13)C]acetylcarnitine and the TCA cycle intermediate [5-(13)C]citrate was dynamically detected in vivo with a time resolution of 3s. Different kinetic models were established and evaluated to determine the metabolic fluxes by simultaneously fitting the evolution of the (13)C labeling in acetate, acetylcarnitine, and citrate. VTCA was estimated to be 6.7±1.7μmol·g(-1)·min(-1) (dry weight), and was best estimated with a model using only the labeling in citrate and acetylcarnitine, independent of the precursor. The TCA cycle rate was not linear with the citrate-to-acetate metabolite ratio, and could thus not be quantified using a ratiometric approach. The (13)C signal evolution of citrate, i.e. citrate formation was independent of the amount of injected acetate, while the (13)C signal evolution of acetylcarnitine revealed a dose dependency with the injected acetate. The (13)C labeling of citrate did not correlate to that of acetylcarnitine, leading to the hypothesis that acetylcarnitine formation is not an indication of mitochondrial TCA cycle activity in the heart. CONCLUSIONS: Hyperpolarized [1-(13)C]acetate is a metabolic probe independent of pyruvate dehydrogenase (PDH) activity. It allows the direct estimation of VTCA in vivo, which was shown to be neither dependent on the administered acetate dose nor on the (13)C labeling of acetylcarnitine. Dynamic (13)C MRS coupled to the injection of hyperpolarized [1-(13)C]acetate can enable the measurement of metabolic changes during impaired heart function.

Evaluation de la tolérance subjective et hémodynamique des membranes de dialyse à faible et haut flux chez les patients sous hémodialyse intermittente chronique : un essai contrôlé randomisé

Les membranes de dialyse à haut flux et à faible flux pourraient être liées à différents profils hemodynamiques pendant les séances de dialyse. Cette étude visait à comparer le profil hémodynamique des certains filtres de dialyse polysulfone couramment utilisés en Suisse. Nous avons réalisé une étude ouverte, cross-over, avec 25 pazients en hémodialyse On a comparés entre eux 4 filtres de polysulfone de la surface de 1 8 m2 A (Revaclear HF, Gambro), B (Helixone HF, Fresenius), C (Xevonta HF, BBraun) et D (Helixone LF Fresenius). Le profil hémodynamique a été mesuré en utilisant une technique non invasive et au patient a été demandé de fournir une opinion sur la tolérance à la seance de dialyse. La même membrane était utilisée pour 3 séances de suites Chaque semaine la membrane de dialyse était modifiée conformément à la séquence de randomisation. Pour chaque patient on a recueillie les données de 12 séances de dialyse. L'étude a été réalisé sur trois mois à compter de novembre 2012. Les analyses ont encore une fois montré la supériorité des filtres à haut débit comparés aux filtres à faible débit, et ne tendance à la supériorité du filtre Helixone (haut debit) comparé aux deux autres membranes. Les filtres à faible débit par rapport a ceux a haut debit sont associés ä une pression systolique et diastolique plus élevées a des résistances périphériques plus hautes et à un débit cardiaque plus faible L incidence d'épisodes d'hypotension en dialyse était la suivante: Revaclear HF (A) 70 Helixone HF (B) 87 Xevonta HF 73 (C), Helixone LF (D) 75. Le nombre d'épisodes d hypotension associée au filtre B était supérieure, de manière significative. La membrane à faible flux était associée à une pression artérielle supérieure à celles des membranes de haut flux. La membrane à haut flux Helixone garantie la meilleure efficacité de dialyse. Malheureusement, la même membrane est associée à une augmentation de l'incidence des épisodes d'hypotension, probablement due à un déséquilibré hé à l'efficacité de la dialyse. Malgré ces résultats, la tolérance subjective pour les différents filtres était comparable.

Annales des sciences d'observation : comprenant l'astronomie, la physique, la chimie, la minéralogie, la géologie, la physiologie et l'anatomie des deux règnes, la botanique, la zoologie,les théories mathématiques ; et les principales applications de toutes ces sciences à la météorologie, à l'agriculture, aux arts et à la médecine / par MM. Saigey et Raspail

Périodicité : Mensuel

Genetic variation in the European hake, Merluccius merluccius. Description of protein loci and genetic divergence between Atlantic and Mediterranean populations = Anàlisi de la variabilitat genètica en el lluç europeu, Merluccius merluccius. Descripció dels loci electroforètics i divergència genètica entre les poblacions atlàntica i mediterrània

We examined the genetic population structure of the european hake (Merluccius merluccius) using electrophoretically detectable population markers in 35 protein loci. Samples were collected from 7 locations in the Atlantic Ocean and Mediterranean Sea. Six loci were polymorphic using the 0.05 criterion of polymorphism. Sample heterozigosities ranged from 0.052 to 0.072 and averaged 0.0625. In this study, significant allele frequency differences were detected between Atlantic and Mediterranean populations in three polymorphic loci: GAPDH-1*, GPI-2* and SOD-1*. Two major genetic groups were considered: a North-Atlantic stock and the Mediterranean stock. The Nei genetic distance, D, (based on 33 loci) between samples from these two groups ranged from 0.002 to 0.006. Genetic differenciation between these areas appears to reflect the barrier effect of Strait of Gibraltar. On average over loci, 96.92 % of the total gene diversity was contained within samples, 0.23 % expressed differences among locations within areas, and 2.64 % differences between regions. A review of morphological variation together with the genetic data presented here suggest that the populations of hake from these areas are subdivided into two different stocks: the North-Atlantic stock and the Mediterranean stock. The most conservative approach to the management of these stocks is to consider the Atlantic and Mediterranean stocks independently from oneanother

Interruptions de grossesse dans le canton de Vaud en 2013

Sur mandat du médecin cantonal, les interventions effectuées dans le canton de Vaud font l'objet d'un monitorage continu et détaillé effectué par l'Institut universitaire de médecine sociale et préventive. En 2013, 1518 interruptions de grossesse ont été déclarées dans le canton de Vaud, soit une de plus que l'année précédente. Dans neuf cas sur dix, la femme enceinte était domiciliée sur le territoire cantonal, soit un total de 1316 femmes. Dans l'ensemble, les statistiques restent très stables. Rapporté à la population féminine en âge de procréer, le taux d'interruption de grossesse chez les résidentes vaudoises est de 7.1 pour mille femmes âgées de 15 à 49 ans (8.8 pour mille femmes âgées de 15 à 44 ansa). L'écart entre femmes de nationalité étrangère et femmes de nationalité suisse persiste avec un taux respectivement de 9.50/00 et 5.50/00. En 2013, on enregistre environ une interruption de grossesse pour six naissances. L'âge médian au moment de l'intervention est de 28 ans. Huit femmes avaient moins de 16 ans. La moitié des interruptions de grossesse réalisées concerne des femmes de nationalité étrangère : huit sur dix ont une autorisation de séjour B ou C, le reste se trouvant en statut précaire (sans permis ou au bénéfice d'un permis N/F/L).

Interruptions de grossesse dans le canton de Vaud en 2014

Sur mandat du médecin cantonal, les interventions effectuées dans le canton de Vaud font l'objet d'un monitorage continu et détaillé effectué par l'Institut universitaire de médecine sociale et préventive. En 2014, 1520 interruptions de grossesse ont été déclarées dans le canton de Vaud, soit deux de plus que l'année précédente. Dans un peu plus de huit cas sur dix, la femme enceinte était domiciliée sur le territoire vaudois, soit un total de 1298 femmes. Dans l'ensemble, les statistiques restent très stables. Rapporté à la population féminine en âge de procréer, le taux d'interruption de grossesse chez les résidentes vaudoises est de 6.8 pour mille femmes âgées de 15 à 49 ans (8.5 pour mille femmes âgées de 15 à 44 ansa). L'écart entre femmes de nationalité étrangère et femmes de nationalité suisse continue à diminuer légèrement avec un taux respectivement de 8.50/00 et 5.60/00, contre 9.20/00 et 5.50/00 respectivement en 2013. En 2014, comme en 2013, on enregistre environ une interruption de grossesse pour six naissances. Les deux tiers des interruptions de grossesse concernent des femmes entre 20 et 34 ans, ainsi l'âge médian au moment de l'intervention est de 28 ans. Dix femmes avaient moins de 16 ans.

Estimation des coûts engendrés par l'occupation inappropriée des lits de soins aigus du CHUV par des patients en attente de placement

[Table des matières] 1. Pourquoi s'intéresser à l'occupation inappropriée des lits de soins aigus au CHUV ?. - 1.1. Etat des lieux. - 1.1.1. Les chiffres du CHUV. - 1.1.2. La cellule de gestion des flux de patients. - 1.1.3. L'unité de patients en attente de placement. - 1.1.4. La pénurie de lits dans les EMS vaudois. - 1.1.5. Le vieillissement de la population vaudoise. - 1.2. Evidences nationales et internationales. - - 2. Estimation des coûts. - 2.1. Coûts chiffrables. - 2.1.1. Perte financière directe. - 2.1.2. Coûts des transferts pour engorgement. - 2.1.3. Coût d'opportunité. - 2.2. Coûts non chiffrables. - 2.2.1. Patients. - 2.2.2. Personnel médical. - 2.2.3. CHUV. - - 3. Propositions. - 3.1. Prises en charge alternatives. - 3.1.1. Les réseaux intégrés de services aux personnes âgées. - 3.1.2. Les courts séjours gériatriques. - 3.1.3. Autres solutions. - 3.2. Prévention. - 3.2.1. Prévention des chutes. - 3.2.2. La prévention par l'information aux personnes âgées. - 3.2.3. La prévention par l'information à l'ensemble de la population

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Concentrated Winding Multiphase Permanent Magnet Machine Design and Electromagnetic Properties – Case Axial Flux Machine

Concentrated winding permanent magnet machines and their electromagnetic properties are studied in this doctoral thesis. The thesis includes a number of main tasks related to the application of permanent magnets in concentrated winding open slot machines. Suitable analytical methods are required for the first design calculations of a new machine. Concentrated winding machines differ from conventional integral slot winding machines in such a way that adapted analytical calculation methods are needed. A simple analytical model for calculating the concentrated winding axial flux machines is provided. The next three main design tasks are discussed in more detail in the thesis. The magnetic length of the rotor surface magnet machines is studied, and it is shown that the traditional methods have to be modified also in this respect. An important topic in this study has been to evaluate and minimize the rotor permanent magnet Joule losses by using segmented magnets in the calculations and experiments. Determination of the magnetizing and leakage inductances for a concentrated winding machine and the torque production capability of concentrated winding machines with different pole pair numbers are studied, and the results are compared with the corresponding properties of integral slot winding machines. The thesis introduces a new practical permanent magnet motor type for industrial use. The special features of the machine are based on the option of using concentrated winding open slot constructions of permanent magnet synchronous machines in the normal speed ranges of industrial motors, for instance up to 3000 min-1, without excessive rotor losses. By applying the analytical equations and methods introduced in the thesis, a 37 kW 2400 min-1 12-slot 10-pole axial flux machine with rotor-surfacemounted magnets is designed. The performance of the designed motor is determined by experimental measurements and finite element calculations.

Estudi de la influència del lubricant en operacions de mecanització

Els processos de mecanitzat amb arrencament de ferritja consisteixen en arrencar contínuament petits fragments de material de la peça a la que es vol donar forma mitjançant les eines de tall. En treballar amb metalls, aquestes forces de tall són importants, i provoquen el desgast de les eines així com un escalfament important de l’eina i la peça. Per aquest motiu s’introdueixen els olis de tall, amb les principals funcions de refrigerar i lubricar. Tradicionalment, aquests olis de tall s’han subministrat a raig, quedant la zona de treball inundada. Els últims anys, degut a les millores tecnològiques i per intentar estalviar amb olis de tall, s’ha ideat un nou sistema anomenat mínima quantitat de lubricant, el qual subministra petites gotes d’oli, no soluble en aigua, dins un flux d’aire a pressió. Aquest sistema, a més, s’injecta prop de la zona de treball, on és estricament necessari. Aquest sistema redueix considerablement el consum d’oli de tall, i a més, augmenta l’eficiència de lalubricació. A part, elimina els posteriors tractaments per reciclar l’oli de tall un cop perd les seves propietats. Per aquest motiu, es pretén estudiar la utilització d’un mètode semblant al de la mínima quantitat de lubricant, subministrant el mateix oli de tall que s’utilitza convencionalment però polvoritzar per tal de convertir-lo en un aerosol

Design and analysis of a transversal-flux switched-reluctance-linear-machine pole-pair

The Switched Reluctance technology is probably best suited for industrial low-speed or zerospeed applications where the power can be small but the torque or the force in linear movement cases might be relatively high. Because of its simple structure the SR-motor is an interesting alternative for low power applications where pneumatic or hydraulic linear drives are to be avoided. This study analyses the basic parts of an LSR-motor which are the two mover poles and one stator pole and which form the “basic pole pair” in linear-movement transversal-flux switchedreluctance motors. The static properties of the basic pole pair are modelled and the basic design rules are derived. The models developed are validated with experiments. A one-sided one-polepair transversal-flux switched-reluctance-linear-motor prototype is demonstrated and its static properties are measured. The modelling of the static properties is performed with FEM-calculations. Two-dimensional models are accurate enough to model the static key features for the basic dimensioning of LSRmotors. Three-dimensional models must be used in order to get the most accurate calculation results of the static traction force production. The developed dimensioning and modelling methods, which could be systematically validated by laboratory measurements, are the most significant contributions of this thesis.

The marketing communications industry in flux: Large B2C advertisers’ viewpoint

The recent digitization, fragmentation of the media landscape and consumers’ changing media behavior are all changes that have had drastic effects on creating marketing communications. In order to create effective marketing communications large advertisers are now co-operating with a variety of marketing communications companies. The purpose of the study is to understand how advertisers perceive these different companies and more importantly how do advertisers expect their roles to change in the future as the media landscape continues to evolve. Especially the changing roles of advertising agencies and media agencies are examined as they are at the moment the most relevant partners of the advertisers. However, the research is conducted from a network perspective rather than focusing on single actors of the marketing communications industry network. The research was conducted using a qualitative theme interview method. The empirical data was gathered by interviewing representatives from nine of the 50 largest Finnish advertisers measured by media spending. Thus, the research was conducted solely from large B2C advertisers’ perspective while the views of their other relevant actors of the network were left unexplored. The interviewees were chosen with a focus on variety of points of view. The analytical framework that was used to analyze the gathered data was built the IMP group’s industrial network model that consists of actors, their resources and activities. As technology driven media landscape fragmentation and consumers’ changing media behavior continue to increase the complexity of creating marketing communications, advertisers are going to need to rely on a growing number of partnerships as they see that the current actors of the network will not be able to widen their expertise to answer to these new needs. The advertisers expect to form new partnerships with actors that are more specialized and able to react and produce activities more quickly than at the moment. Thus, new smaller and more agile actors with looser structures are going to appear to fill these new needs. Therefore, the need of co-operation between the actors is going to become more important. These changes pose the biggest threat for traditional advertising agencies as they were seen as being most unable to cope with the ongoing change. Media agencies are in a more favorable position for remaining relevant for the advertisers as they will be able to justify their activities and provided value by leveraging their data handling abilities. In general the advertisers expect to be working with a limited number of close actors and in addition having a network of smaller actors, which are used on a more ad hoc basis.