901 resultados para accelerator driven transmutation


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Biological dosimetry (biodosimetry) is based on the investigation of radiation-induced biological effects (biomarkers), mainly dicentric chromosomes, in order to correlate them with radiation dose. To interpret the dicentric score in terms of absorbed dose, a calibration curve is needed. Each curve should be constructed with respect to basic physical parameters, such as the type of ionizing radiation characterized by low or high linear energy transfer (LET) and dose rate. This study was designed to obtain dose calibration curves by scoring of dicentric chromosomes in peripheral blood lymphocytes irradiated in vitro with a 6 MV electron linear accelerator (Mevatron M, Siemens, USA). Two software programs, CABAS (Chromosomal Aberration Calculation Software) and Dose Estimate, were used to generate the curve. The two software programs are discussed; the results obtained were compared with each other and with other published low LET radiation curves. Both software programs resulted in identical linear and quadratic terms for the curve presented here, which was in good agreement with published curves for similar radiation quality and dose rates.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fluid handling systems such as pump and fan systems are found to have a significant potential for energy efficiency improvements. To deliver the energy saving potential, there is a need for easily implementable methods to monitor the system output. This is because information is needed to identify inefficient operation of the fluid handling system and to control the output of the pumping system according to process needs. Model-based pump or fan monitoring methods implemented in variable speed drives have proven to be able to give information on the system output without additional metering; however, the current model-based methods may not be usable or sufficiently accurate in the whole operation range of the fluid handling device. To apply model-based system monitoring in a wider selection of systems and to improve the accuracy of the monitoring, this paper proposes a new method for pump and fan output monitoring with variable-speed drives. The method uses a combination of already known operating point estimation methods. Laboratory measurements are used to verify the benefits and applicability of the improved estimation method, and the new method is compared with five previously introduced model-based estimation methods. According to the laboratory measurements, the new estimation method is the most accurate and reliable of the model-based estimation methods.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The goal of this thesis is to study user-driven innovations and user involvement throughout the innovation process in context of B2B companies. Significant emphasis in the analysis put onto the late stages of innovation process and commercialization of innovations. Thesis includes detailed review of theoretical concepts and underlying frameworks of innovation process, lead users and user-driven innovations. The empirical part of the thesis consist of interviews of the four companies from ICT industry, followed by the comprehensive analysis and comparison of the results. The presented findings indicate common challenges, which ICT companies face, when shifting towards innovation by users paradigm. Linkages and connections among current situation and theoretical frameworks presented in the discussion part of the thesis allow to draw practical managerial implications. The results of the research emphasize valuable insights and challenges of user interactions within innovation process as well as output and participation related benefits for the companies and users. The research points out current state of the user involvement techniques and tools used for user interactions as well as suggests the possibilities for improvement in the future.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This thesis studies energy efficiencies and technical properties of gas driven ground source heat pumps and pump systems. The research focuses on two technologies: gas engine driven compressor heat pump and thermally driven gas absorption heat pump. System consist of a gas driven compressor or absorption ground source heat pump and a gas condensing boiler, which covers peak load. The reference system is a standard electrically powered compressor heat pump with electric heating elements for peak load. The systems are compared through primary energy ratios. Coefficient of performances of different heat pump technologies are also compared. At heat pump level, gas driven heat pumps are having lower coefficient of performances as compared with corresponding electric driven heat pump. However, gas heat pumps are competitive when primary energy ratios, where electricity production losses are counted in, are compared. Technically, gas heat pumps can potentially achieve a slightly higher temperatures with greater total energy efficiency as compared to the electric driven heat pump. The primary energy ratios of gas heat pump systems in relation to EHP-system improves when the share of peak load increases. Electric heat pump system's overall energy efficiency is heavily dependent on the electricity production efficiency. Economy as well as CO2-emissions were not examined in this thesis, which however, would be good topics for further study.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The search for efficient and accessible cooling systems has increased worldwide. This study aims to build and evaluate an evaporative cooling system using a water driven ejector, allowing it to be installed in places with plenty of water. The system was investigated varying the flow rate and temperature of the circulating water, temperature of the replacement water, and coefficient of performance. The best vacuum obtained was 8.5 kPa at nominal operating conditions of 4.1 ± 0.1 m³/h and 5 ± 0.5 ºC for the circulating water reaching the temperature of 9.7 ± 0.5 ºC. The pulse-like disturbance generated by replacing the cooling water at different periods of times did not result in significant affect vacuum destabilization and the temperature rise in the cooling tank. The coefficient of performance of the system at the highest thermal power of 92.27 W was 0.077, which was underestimated due to possible problems related to pump efficiency. The system evaluated under the conditions proposed can be very efficient for cooling fluids at higher temperatures, and it can be complementary to main refrigeration systems.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The awareness and concern of our environment together with legislation have set more and more tightening demands for energy efficiency of non-road mobile machinery (NRMM). Integrated electro-hydraulic energy converter (IEHEC) has been developed in Lappeenranta University of Technology (LUT). The elimination of resistance flow, and the recuperation of energy makes it very efficient alternative. The difficulties of IEHEC machine to step to the market has been the requirement of one IEHEC machine per one actuator. The idea is to switch IEHEC between two actuators of log crane using fast on/off valves. The control system architecture is introduced. The system has been simulated in co-simulation using two different software. The simulated responses of pump-controlled system is compared to the responses of the conventional valve-controlled system.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Health Innovation Village at GE is one of the new communities targeted for startup and growth-oriented companies. It has been established at the premises of a multinational conglomerate that will promote networking and growth of startup companies. The concept combines features from traditional business incubators, accelerators, and coworking spaces. This research compares Health Innovation Village to these concepts regarding its goals, target clients, source of income, organization, facilities, management, and success factors. In addition, a new incubator classification model is introduced. On the other hand, Health Innovation Village is examined from its tenants’ perspective and improvements are suggested. The work was implemented as a qualitative case study by interviewing GE staff with connections to Health Innovation Village as well as startup entrepreneurs and employees’ working there. The most evident features of Health Innovation Village correspond to those of business incubators although it is atypical as a non-profit corporate business incubator. Strong network orientation and connections to venture capitalists are common characteristics of these new types of accelerators. The design of the premises conforms to the principles of coworking spaces, but the services provided to the startup companies are considerably more versatile than the services offered by coworking spaces. The advantages of Health Innovation Village are that there are first-class premises and exceptionally good networking possibilities that other types of incubators or accelerators are not able to offer. A conglomerate can also provide multifaceted special knowledge for young firms. In addition, both GE and the startups gained considerable publicity through their cooperation, indeed a characteristic that benefits both parties. Most of the expectations of the entrepreneurs were exceeded. However, communication and the scope of cooperation remain challenges. Micro companies spend their time developing and marketing their products and acquiring financing. Therefore, communication should be as clear as possible and accessible everywhere. The startups would prefer to cooperate significantly more, but few have the time available to assume the responsibility of leadership. The entrepreneurs also expected to have more possibilities for cooperation with GE. Wider collaboration might be accomplished by curation in the same way as it is used in the well-functioning coworking spaces where curators take care of practicalities and promote cooperation. Communication issues could be alleviated if the community had its own Intranet pages where all information could be concentrated. In particular, a common calendar and a room reservation system could be useful. In addition, it could be beneficial to have a section of the Intranet open for both the GE staff and the startups so that those willing to share their knowledge and those having project offers could use it for advertising.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Comprend : Traité du mercure et de la pierre des philosophes ; Le vray livre de la pierre philosophale ; Le livre des figures hiéroglyphiques ; Le livre secret du très ancien philosophe Artephius traitant de l'art occulte et de la pierre philosophale

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study occurred in 2009 and questioned how Ontario secondary school principals perceived their role had changed, over a 7 year period, in response to the increased demands of data-driven school environments. Specifically, it sought to identify principals' perceptions on how high-stakes testing and data-driven environments had affected their role, tasks, and accountability responsibilities. This study contextualized the emergence of the Education Quality and Accountability Offices (EQAO) as a central influence in the creation of data-driven school environments, and conceptualized the role of the principal as using data to inform and persuade a shift in thinking about the use of data to improve instruction and student achievement. The findings of the study suggest that data-driven environments had helped principals reclaim their positional power as instructional leaders, using data as an avenue back into the classroom. The use of data shifted the responsibilities of the principal to persuade teachers to work collaboratively to improve classroom instruction in order to demonstrate accountability.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This lexical decision study with eye tracking of Japanese two-kanji-character words investigated the order in which a whole two-character word and its morphographic constituents are activated in the course of lexical access, the relative contributions of the left and the right characters in lexical decision, the depth to which semantic radicals are processed, and how nonlinguistic factors affect lexical processes. Mixed-effects regression analyses of response times and subgaze durations (i.e., first-pass fixation time spent on each of the two characters) revealed joint contributions of morphographic units at all levels of the linguistic structure with the magnitude and the direction of the lexical effects modulated by readers’ locus of attention in a left-to-right preferred processing path. During the early time frame, character effects were larger in magnitude and more robust than radical and whole-word effects, regardless of the font size and the type of nonwords. Extending previous radical-based and character-based models, we propose a task/decision-sensitive character-driven processing model with a level-skipping assumption: Connections from the feature level bypass the lower radical level and link up directly to the higher character level.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

List of [timber railway] piles delivered and driven (1 page, handwritten). This is signed by Alex Morrison, July 1856.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Sketch of the height of the piles driven for the bridge across Chippewa Creek at Port Robinson, Jan. 3, 1856.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Thèse diffusée initialement dans le cadre d'un projet pilote des Presses de l'Université de Montréal/Centre d'édition numérique UdeM (1997-2008) avec l'autorisation de l'auteur.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

L'être humain utilise trois systèmes sensoriels distincts pour réguler le maintien de la station debout: la somesthésie, le système vestibulaire, et le système visuel. Le rôle de la vision dans la régulation posturale demeure peu connu, notamment sa variabilité en fonction de l'âge, du type développemental, et des atteintes neurologiques. Dans notre travail, la régulation posturale induite visuellement a été évaluée chez des participants au développement et vieillissement normaux âgés de 5-85 ans, chez des individus autistes (développement atypique) âgés de 12-33 ans, ainsi que chez des enfants entre 9-18 ans ayant subi un TCC léger. À cet effet, la réactivité posturale des participants en réponse à un tunnel virtuel entièrement immersif, se mouvant à trois niveaux de vélocité, a été mesurée; des conditions contrôles, où le tunnel était statique ou absent, ont été incluses. Les résultats montrent que la réactivité (i.e. instabilité) posturale induite visuellement est plus élevée chez les jeunes enfants; ensuite, elle s'atténue pour rejoindre des valeurs adultes vers 16-19 ans et augmente de façon linéaire en fonction de l'âge après 45 ans jusqu'à redevenir élevée vers 60 ans. De plus, à la plus haute vélocité du tunnel, les plus jeunes participants autistes ont manifesté significativement moins de réactivité posturale comparativement à leurs contrôles; cette différence n'était pas présente chez des participants plus âgés (16-33 ans). Enfin, les enfants ayant subi un TCC léger, et qui étaient initialement modérément symptomatiques, ont montré un niveau plus élevé d'instabilité posturale induite visuellement que les contrôles, et ce jusqu'à 12 semaines post-trauma malgré le fait que la majorité d'entre eux (89%) n'étaient plus symptomatiques à ce stade. En somme, cela suggère la présence d'une importante période de transition dans la maturation des systèmes sous-tendant l'intégration sensorimotrice impliquée dans le contrôle postural vers l'âge de 16 ans, et d'autres changements sensorimoteurs vers l'âge de 60 ans; cette sur-dépendance visuelle pour la régulation posturale chez les enfants et les aînés pourrait guider l'aménagement d'espaces et l'élaboration d'activités ajustés à l'âge des individus. De plus, le fait que l'hypo-réactivité posturale aux informations visuelles chez les autistes dépende des caractéristiques de l'environnement visuel et de l'âge chronologique, affine notre compréhension des anomalies sensorielles propres à l'autisme. Par ailleurs, le fait que les enfants ayant subi un TCC léger montrent des anomalies posturales jusqu'à 3 mois post-trauma, malgré une diminution significative des symptômes rapportés, pourrait être relié à une altération du traitement de l'information visuelle dynamique et pourrait avoir des implications quant à la gestion clinique des patients aux prises avec un TCC léger, puisque la résolution des symptômes est actuellement le principal critère utilisé pour la prise de décision quant au retour aux activités. Enfin, les résultats obtenus chez une population à développement atypique (autisme) et une population avec atteinte neurologique dite transitoire (TCC léger), contribuent non seulement à une meilleure compréhension des mécanismes d'intégration sensorimotrice sous-tendant le contrôle postural mais pourraient aussi servir comme marqueurs sensibles et spécifiques de dysfonction chez ces populations. Mots-clés : posture, équilibre, vision, développement/vieillissement sensorimoteur, autisme, TCC léger symptomatique, réalité virtuelle.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Cette thèse a pour but d’améliorer l’automatisation dans l’ingénierie dirigée par les modèles (MDE pour Model Driven Engineering). MDE est un paradigme qui promet de réduire la complexité du logiciel par l’utilisation intensive de modèles et des transformations automatiques entre modèles (TM). D’une façon simplifiée, dans la vision du MDE, les spécialistes utilisent plusieurs modèles pour représenter un logiciel, et ils produisent le code source en transformant automatiquement ces modèles. Conséquemment, l’automatisation est un facteur clé et un principe fondateur de MDE. En plus des TM, d’autres activités ont besoin d’automatisation, e.g. la définition des langages de modélisation et la migration de logiciels. Dans ce contexte, la contribution principale de cette thèse est de proposer une approche générale pour améliorer l’automatisation du MDE. Notre approche est basée sur la recherche méta-heuristique guidée par les exemples. Nous appliquons cette approche sur deux problèmes importants de MDE, (1) la transformation des modèles et (2) la définition précise de langages de modélisation. Pour le premier problème, nous distinguons entre la transformation dans le contexte de la migration et les transformations générales entre modèles. Dans le cas de la migration, nous proposons une méthode de regroupement logiciel (Software Clustering) basée sur une méta-heuristique guidée par des exemples de regroupement. De la même façon, pour les transformations générales, nous apprenons des transformations entre modèles en utilisant un algorithme de programmation génétique qui s’inspire des exemples des transformations passées. Pour la définition précise de langages de modélisation, nous proposons une méthode basée sur une recherche méta-heuristique, qui dérive des règles de bonne formation pour les méta-modèles, avec l’objectif de bien discriminer entre modèles valides et invalides. Les études empiriques que nous avons menées, montrent que les approches proposées obtiennent des bons résultats tant quantitatifs que qualitatifs. Ceux-ci nous permettent de conclure que l’amélioration de l’automatisation du MDE en utilisant des méthodes de recherche méta-heuristique et des exemples peut contribuer à l’adoption plus large de MDE dans l’industrie à là venir.