Combustion properties of biomass residues rich in phosphorus

Tillgången på traditionella biobränslen är begränsad och därför behöver man ta fram nya, tidigare outnyttjade biobränslen för att möta de uppställda CO2 emissionsmålen av EU och det ständigt ökande energibehovet. Under de senare åren har intresset riktats mot termisk energiutvinning ur olika restfraktioner och avfall. Vid produktion av fordonsbränsle ur biomassa är den fasta restprodukten ofta den största procesströmmen i produktionsanläggningen. En riktig hantering av restprodukterna skulle göra produktionen mera lönsam och mer ekologiskt hållbar. Ett alternativ är att genom förbränning producera elektricitet och/eller värme eftersom dessa restprodukter anses som CO2-neutrala. Målsättningen med den här avhandlingen var att studera förbränningsegenskaperna hos några fasta restprodukter som uppstår vid framställning av förnybara fordonsbränslen. De fyra undersökta materialen är rapskaka, palmkärnskaka, torkad drank och stabiliserat rötslam. I studien används ett stort urval av undersökningsmetoder, från laboratorieskala till fullskalig förbränning, för att identifiera de huvudsakliga utmaningarna förknippade med förbränning av restprodukterna i pannor med fluidiserad bäddteknik. Med hjälp av detaljerad bränslekarakterisering kunde restprodukterna konstateras vara en värdefull källa för värme- och elproduktion. Den kemiska sammansättningen av restprodukterna varierar stort jämfört med mera traditionellt använda biobränslen. En gemensam faktor för alla de studerade restprodukterna är en hög fosforhalt. På grund av de låga fosforkoncentrationerna i de traditionella biobränslena har grundämnet hittills inte ansetts spela någon större roll i askkemin. Experimenten visade nu att fosfor inte mera kan försummas då man studerar kemin i förbränningsprocesser, då allt flera fosforrika bränslen tränger in på energimarknaden.

Soil CO2 emission as related to incorporation of sugarcane crop residues and aggregate breaking after rotary tiller

Soil tillage is a process that accelerates soil organic matter decomposition transferring carbon to atmosphere, mainly in the CO2 form. In this study, the effect of rotary tillage on soil CO2 emission was investigated, including the presence of crop residues on the surface.Emissions were evaluated during 15 days after tillage in 3 plots: 1) non-tilled and without crop residues on soil surface (NTwo), 2) rotary tiller without the presence of crop residues on soil surface (RTwo), and 3) rotary tiller with the presence of crop residues in soil surface (RTw). Emissions from the RTw plot were higher than the other plots, (0.777 g CO2 m-2 h-1), with the lowest emissions recorded in the NTwo plot (0.414 g CO2 m-2 h-1). Total emission indicates that the difference of C-CO2 emitted to atmosphere corresponds to 3% of the total additional carbon in the crop residues in the RTw plot compared to RTwo. The increase in the RTwo emission in comparison to NTwo was followed by changes in the aggregate size distribution, especially those with average diameter lower than 2 mm. The increase in emission from the RTw plot in relation to RTwo was related to a decrease in crop residue mass on the surface, and its higher fragmentation and incorporation in soil. When the linear correlation between soil CO2 emission, and soil temperature and soil moisture is considered, only the RTw treatment showed significant correlation (p<0.05) with soil moisture.

Escoamento superficial na interação: cobertura vegetal e práticas de controle de erosão

O escoamento da água oriunda das terras agricultadas é o principal fator poluente dos mananciais hídricos nas áreas rurais. Devido a esse fato, faz-se necessário o desenvolvimento e a aplicação de tecnologias que venham a reduzir descargas de resíduos indesejáveis. Nesse sentido, conduziu-se um experimento na área experimental do Departamento de Engenharia Rural - ESALQ/USP, Piracicaba - SP, com o objetivo de avaliar o efeito de diferentes condições de solo, (feijão, gramínea e solo nu) e diferentes práticas de controle de erosão (sulco de infiltração, terraço de infiltração e sem práticas de controle de erosão), buscando-se estimar o escoamento superficial. O delineamento estatístico adotado foi o em blocos aleatorizados, em esquema fatorial 3x3, perfazendo 9 tratamentos com 3 repetições. O período de coleta de dados pluviométricos foi de 06 de dezembro de 2007 a 11 de abril de 2008; para isto, utilizou-se de um pluviômetro, com 21,1 cm de diâmetro, instalado na área experimental. Observando-se as perdas de água, em relação às estruturas, tem-se em ordem decrescente de eficiência: Terraço, Sulco e Rampa; e com relação às coberturas, tem-se em ordem decrescente de eficiência: Feijão, Capim e Solo Nu.

Atrazine bound residues formation and dissipation in subtropical soil under swine wastewater application

The effects of swine wastewater on atrazine dissipation and formation of bound residues in subtropical clay soil were investigated in this study. The experiment was carried out in laboratory, under room conditions, where samples of Rhodic Hapludox soil received 168.61 mg kg-1 of atrazine and were incubated for 60 days in the following treatments: T1 (sterilized soil + swine wastewater), T2 (sterilized soil + distilled water), T3 (Non sterilized soil + swine wastewater) and T4 (Non sterilized soil + distilled water). The extractable residues and bound residues of atrazine were extracted and analyzed by high performance liquid chromatography. The results showed no effect of swine wastewater on atrazine dissipation. However, the addition of swine wastewater favored the increase of bound residues, which can increase the persistence of atrazine in the environment and reduce its bioavailability.

Crop residues on short-term CO2 emissions in sugarcane production areas

The proper management of agricultural crop residues could produce benefits in a warmer, more drought-prone world. Field experiments were conducted in sugarcane production areas in the Southern Brazil to assess the influence of crop residues on the soil surface in short-term CO2 emissions. The study was carried out over a period of 50 days after establishing 6 plots with and without crop residues applied to the soil surface. The effects of sugarcane residues on CO2 emissions were immediate; the emissions from residue-covered plots with equivalent densities of 3 (D50) and 6 (D100) t ha-1 (dry mass) were less than those from non-covered plots (D0). Additionally, the covered fields had lower soil temperatures and higher soil moisture for most of the studied days, especially during the periods of drought. Total emissions were as high as 553.62 ± 47.20 g CO2 m-2, and as low as 384.69 ± 31.69 g CO2 m-2 in non-covered (D0) and covered plot with an equivalent density of 3 t ha-1 (D50), respectively. Our results indicate a significant reduction in CO2 emissions, indicating conservation of soil carbon over the short-term period following the application of sugarcane residues to the soil surface.

Nutrient loss in composting of agroindustrial residues

The management of composting may influence the characteristics of the produced compounds. The experiment used three frequencies of plowing, combined with the conditions: with and without coverage of the composting patio, with and without the use of commercial inoculant, resulting in 12 furrows, installed on the Experimental Center of Agricultural Engineering (NEEA), of the STATE UNIVERSITY OF WEST PARANÁ (UNIOESTE), Campus of Cascavel city - state of Paraná (PR), in Brazil. The waste and quantities used in kg were: corn cob (7.5); hatchery residue (5); floater sludge (31); ash (1); wheat cleaning residue (120); wheat pre-cleaning residue (120); corn peel (7.5); solid fraction of wash trucks used to transport chickens (2); solid fraction of pig manure (1) and coal (5), totaling 300kg of natural matter. The aim of this study was to evaluate the influence of plowings, patio coverage and inoculation in losses of N, P, K, Ca, Mg, Na, Cu, Zn, Mn, Fe. The furrows plowed three times a week in the first month showed significant higher losses of N (p<0.05). The coverage of the composting patio influenced significantly the losses of N, K, Mg and Na (p<0.05). The produced compounds had a high agronomic value in relation to macro and micronutrients. It is recommended the use of patio coverage and plowing twice a week in the first month and once a week in the subsequent months for a compound with higher concentrations of nutrients.

Characterization and treatment of sisal fiber residues for cement-based composite application

Sisal fiber is an important agricultural product used in the manufacture of ropes, rugs and also as a reinforcement of polymeric or cement-based composites. However, during the fiber production process a large amount of residues is generated which currently have a low potential for commercial use. The aim of this study is to characterize the agricultural residues by the production and improvement of sisal fiber, called field bush and refugo and verify the potentiality of their use in the reinforcement of cement-based composites. The residues were treated with wet-dry cycles and evaluated using tensile testing of fibers, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Compatibility with the cement-based matrix was evaluated through the fiber pull-out test and flexural test in composites reinforced with 2 % of sisal residues. The results indicate that the use of treated residue allows the production of composites with good mechanical properties that are superior to the traditional composites reinforced with natural sisal fibers.

Organophosphorus and carbamates residues in milk and feedstuff supplied to dairy cattle

Considering acute and chronic toxicity effects on human and animal health caused by pesticide residues in food, this study aimed to analyze organophosphorate (OP) and carbamate (CB) in feedstuff and water destined for dairy cattle, as well as in the milk produced by these animals, through gas chromatography (GC). In the Agreste region of Pernambuco, Brazil, 30 raw milk samples and all components of the animals' diet were collected from several farms. Out of the 30 milk of milk analyzed, six (20%) were contaminated with OP, five (16.7%) with CB, and one sample with both pesticides. From 48 analyzed feed samples, 15 (31.25%) were contaminated with residues of OP, six (12.50%) with CB, and one sample was contaminated with both pesticides. Out of 16 water samples analyzed, six (37.50%) were contaminated with OP residues, but non with CB. In four dairy farms the pesticides detected in milk were compatible with the active principles found in water and/or foodstuff, suggesting them to be the source of contamination.

Oxidation rates of carbon and nitrogen in char residues from solid fuels

Computational fluid dynamics (CFD) modeling is an important tool in designing new combustion systems. By using CFD modeling, entire combustion systems can be modeled and the emissions and the performance can be predicted. CFD modeling can also be used to develop new and better combustion systems from an economical and environmental point of view. In CFD modeling of solid fuel combustion, the combustible fuel is generally treated as single fuel particles. One of the limitations with the CFD modeling concerns the sub-models describing the combustion of single fuel particles. Available models in the scientific literature are in many cases not suitable as submodels for CFD modeling since they depend on a large number of input parameters and are computationally heavy. In this thesis CFD-applicable models are developed for the combustion of single fuel particles. The single particle models can be used to improve the combustion performance in various combustion devices or develop completely new technologies. The investigated fields are oxidation of carbon (C) and nitrogen (N) in char residues from solid fuels. Modeled char-C oxidation rates are compared to experimental oxidation rates for a large number of pulverized solid fuel chars under relevant combustion conditions. The experiments have been performed in an isothermal plug flow reactor operating at 1123-1673 K and 3-15 vol.% O2. In the single particle model, the char oxidation is based on apparent kinetics and depends on three fuel specific parameters: apparent pre-exponential factor, apparent activation energy, and apparent reaction order. The single particle model can be incorporated as a sub-model into a CFD code. The results show that the modeled char oxidation rates are in good agreement with experimental char oxidation rates up to around 70% of burnout. Moreover, the results show that the activation energy and the reaction order can be assumed to be constant for a large number of bituminous coal chars under conditions limited by the combined effects of chemical kinetics and pore diffusion. Based on this, a new model based on only one fuel specific parameter is developed (Paper III). The results also show that reaction orders of bituminous coal chars and anthracite chars differ under similar conditions (Paper I and Paper II); reaction orders of bituminous coal chars were found to be one, while reaction orders of anthracite chars were determined to be zero. This difference in reaction orders has not previously been observed in the literature and should be considered in future char oxidation models. One of the most frequently used comprehensive char oxidation models could not explain the difference in the reaction orders. In the thesis (Paper II), a modification to the model is suggested in order to explain the difference in reaction orders between anthracite chars and bituminous coal chars. Two single particle models are also developed for the NO formation and reduction during the oxidation of single biomass char particles. In the models the char-N is assumed to be oxidized to NO and the NO is partly reduced inside the particle. The first model (Paper IV) is based on the concentration gradients of NO inside and outside the particle and the second model is simplified to such an extent that it is based on apparent kinetics and can be incorporated as a sub-model into a CFD code (Paper V). Modeled NO release rates from both models were in good agreement with experimental measurements from a single particle reactor of quartz glass operating at 1173-1323 K and 3-19 vol.% O2. In the future, the models can be used to reduce NO emissions in new combustion systems.

Sanitizer residues in the milk of cows which had passed through footbaths

Copper sulfate and sodium hypochlorite are used in footbath solutions for the prevention and treatment of bovine digital diseases; however, data on the residues of such elements in milk are sparse in Brazil. This study evaluated the cost of applying the footbath treatment and the total amount of copper and chlorite residues in the milk of healthy cows after they had passed through these footbath solutions. Two groups of 7 cows each (GI and GII) were studied. In the case of GI, 1% sodium hypochlorite was used and for GII 5% copper sulfate was employed in the footbath. The milk samples were collected before the 7-day footbath treatment period (M0) and 24 h (M1), 48 h (M2), 72 h (M3) and 15 days (M15) after the last footbath. Statistical analysis to compare the different samples within each group was carried out by applying Friedman's test, followed by Dunn's test (p<0.05). It was concluded that the amount of total chlorites and copper in the milk of healthy cattle after routine daily footbaths for a period of 7 days presented some variations. However, the concentrations observed were considered insufficient to represent a risk to human health. The cost of the footbath solutions was found to be reasonable.

Período crítico para controle de Brachiaria plantaginea em função de épocas de semeadura da soja após dessecação da cobertura vegetal

Este trabalho objetivou avaliar o impacto da época de semeadura da soja após a dessecação da cobertura vegetal sobre o controle de papuã (Brachiaria plantaginea) e quantificar a influência da época de controle na produtividade da soja. O delineamento experimental utilizado foi o de parcelas subdivididas, em blocos casualizados, com quatro repetições. Os tratamentos constaram de épocas de semeadura da soja (1 e 10 dias após aplicação de dessecante - DAD), dispostas nas parcelas principais, e de épocas de controle de papuã (11, 17, 24, 31, 38 e 45 dias após a emergência da soja - DAE para a semeadura realizada em 1 DAD; e 8, 15, 22, 29, 36 e 42 DAE para a semeadura realizada aos 10 DAD), dispostas nas subparcelas. Para cada época de semeadura da soja foi mantida testemunha com controle químico de papuã durante todo o ciclo. O controle de papuã foi obtido mediante aplicação do herbicida clethodim a 120 g ha-1. Constatou-se que os níveis de controle de papuã, na pré-colheita da soja, variaram entre 90 e 99%, considerando-se todos os tratamentos. Houve reduções da estatura de planta de soja, rendimento biológico aparente e rendimento de grãos com o atraso na aplicação de controle ao papuã, especialmente para semeadura da soja realizada aos 10 DAD. Verificou-se que as perdas de rendimento de grãos, propiciadas pela convivência da planta daninha com a cultura, superaram o custo de controle aproximadamente aos 20 e 5 DAE da soja, quando as semeaduras foram efetuadas aos 1 e 10 DAD, respectivamente. O intervalo entre as aplicações de medidas de controle ao papuã é mais amplo quando a semeadura da soja é realizada mais próximo do momento de aplicação de dessecante do que quando sofre atraso.

Potencial de utilização de cobertura vegetal de sorgo e milheto na supressão de plantas daninhas em condição de campo: II - Efeitos da cobertura morta

A capacidade de supressão de plantas daninhas por culturas de cobertura é bastante conhecida e explorada, embora seja pouco pesquisada a importância relativa dos efeitos físicos e alelopáticos sobre esse fenômeno. Dois experimentos foram realizados a campo, em 1999/2000 e 2000/2001, na área experimental da Faculdade de Agronomia da UFRGS, no delineamento experimental em blocos ao acaso, com quatro repetições, objetivando determinar os efeitos da cobertura morta de plantas de sorgo e de milheto sobre a supressão de plantas daninhas. Nos dois anos de condução dos experimentos, os tratamentos resultaram de um fatorial, em que o fator A foi constituído pelos genótipos de sorgo RS 11, BR 601 e BR 304, representantes de três classes de produção de extratos radiculares hidrofóbicos em laboratório, pelo genótipo de milheto Comum RS e por uma testemunha sem culturas; e o fator B, constituído por níveis de palha de cada genótipo sobre o solo. Em 1999/2000, níveis de palha de sorgo de 1,3 t ha-1 foram suficientes para reduzir 50% das infestações de Brachiaria plantaginea (BRAPL) e Sida rhombifolia (SIDRH). Em 2000/2001, 4 t ha-1 de palha de sorgo ou milheto foram suficientes para reduzir 91, 96 e 59% da população total de SIDRH, BRAPL e Bidens pilosa, respectivamente. A presença de resíduos da parte aérea de sorgo é mais importante na supressão de plantas daninhas do que a presença de resíduos das raízes dessa cultura.

ANATI QUANTI: software de análises quantitativas para estudos em anatomia vegetal

Em diversos estudos interdisciplinares em que a Anatomia Vegetal é utilizada, análises quantitativas complementares são necessárias. Geralmente, a avaliação micromorfométrica é feita manualmente e/ou utilizando programas computacionais de análise de imagens não específicos. Este trabalho teve como objetivo desenvolver um programa específico para Anatomia Vegetal quantitativa e testar sua eficiência e aceitação por usuários. A solução foi elaborada na linguagem Java, visando maior mobilidade em relação ao sistema operacional a ser usado. O software desenvolvido foi denominado ANATI QUANTI e testado pelos alunos, pesquisadores e professores do Laboratório de Anatomia Vegetal da Universidade Federal de Viçosa (UFV). Todos os entrevistados receberam fotos para efetuarem medições no ANATI QUANTI e comparar com os resultados obtidos utilizando o software disponível. Os voluntários, através de questionários previamente formulados, destacaram as principais vantagens e desvantagens do programa desenvolvido em relação ao software disponível. Além de ser mais específico, simples e ágil do que o software disponível, o ANATI QUANTI é confiável, atendendo à expectativa dos entrevistados. Entretanto, há necessidade de acrescentar recursos adicionais, como a inserção de novas escalas, o que aumentaria a gama de usuários. O ANATI QUANTI já está em uso nas pesquisas desenvolvidas por usuários na UFV. Por ser um software livre e de código aberto, será disponibilizado na internet gratuitamente.

Formação de cobertura vegetal e manejo de plantas daninhas na cultura da soja em sistema plantio direto

Objetivou-se com este trabalho avaliar a formação de cobertura vegetal por Brachiaria brizantha e B. decumbens, bem como as interações entre as coberturas vegetais, as dosagens do herbicida glifosato e a aplicação da mistura fluazifop-p-butil + fomesafen, no manejo das plantas daninhas e na produção da soja MG/BR 46 - Conquista em sistema plantio direto. Utilizou-se delineamento experimental de blocos ao acaso, num esquema de parcelas subsubdivididas, com quatro repetições. Testaram-se duas espécies de braquiária (B. brizantha e B. decumbens), duas dosagens do herbicida glifosato (1,44 e 2,16 kg e.a. ha-1) e duas dosagens da mistura fluazifop-p-butil + fomesafen (0 e 0,25 + 0,25 kg i.a. ha-1). Foram realizadas avaliações de matéria seca das coberturas, eficácia do glifosato, rebrote das coberturas, altura das plantas de soja, número de vagens, altura de inserção da primeira vagem, acamamento, dificuldade de colheita, massa de 100 grãos e produtividade. Concluiu-se que B. decumbens e B. brizantha proporcionaram adequada cobertura do solo durante todo o ciclo da cultura, que a dosagem de 1,44 kg e.a. ha-1 de glifosato foi suficiente para o controle das duas espécies de braquiária e que a produtividade da cultura da soja não foi alterada significativamente pela palhada das duas espécies estudadas nem pela dosagem do glifosato, enquanto a aplicação de fluazifop-p-butil + fomesafen como controle complementar refletiu em maior produtividade e em menor dificuldade de colheita.

Effect of crop residues applied isolated or in combination on the germination and seedling growth of horse purslane (Trianthema portulacastrum)

Soil incorporation of crop residues can lead to weed suppression by posing allelopathic and physical effects. Allelopathic potential of the crops sorghum, sunflower, brassica applied as sole or in combination for horse purslane (Trianthema portulacastrum) suppression was evaluated in a pot investigation. Chopped crop residues alone and in combination were incorporated at 6 g kg-1 soil (12 t ha-1), and a weedy check was maintained. Germination traits time to start germination; time to 50% emergence, mean emergence time, emergence index and final germination percentage were negatively influenced by residue incorporation. Crop residues also exerted a pronounced negative influence on the shoot and root length of horse purslane. Significant suppression in leaf and root score and leaf area per plant was also observed. A combination of sorghum and sunflower residues accounted for maximum (71%) seedling mortality. Soil incorporation of allelopathic crop residues can be employed for horse purslane management.